Page MenuHomePhabricator
Files F7711872

No OneTemporary
Actions

Size
629 KB
Referenced Files
None
Subscribers
None

View Options

This file is larger than 256 KB, so syntax highlighting was skipped.
diff --git a/trunk/hivex/.gitmodules b/trunk/hivex/.gitmodules
deleted file mode 100644
index 579ec64..0000000
--- a/trunk/hivex/.gitmodules
+++ /dev/null
@@ -1,3 +0,0 @@
-[submodule ".gnulib"]
- path = .gnulib
- url = git://git.sv.gnu.org/gnulib.git
diff --git a/trunk/hivex/.tx/config b/trunk/hivex/.tx/config
deleted file mode 100644
index 705e760..0000000
--- a/trunk/hivex/.tx/config
+++ /dev/null
@@ -1,7 +0,0 @@
-[main]
-host = https://www.transifex.net
-
-[hivex.hivexpot]
-file_filter = po/<lang>.po
-source_file = po/hivex.pot
-source_lang = en
diff --git a/trunk/hivex/.x-sc_prohibit_magic_number_exit b/trunk/hivex/.x-sc_prohibit_magic_number_exit
deleted file mode 100644
index 5a3f685..0000000
--- a/trunk/hivex/.x-sc_prohibit_magic_number_exit
+++ /dev/null
@@ -1,2 +0,0 @@
-^.*\.java$
-^.*\.pl$
diff --git a/trunk/hivex/LICENSE b/trunk/hivex/LICENSE
deleted file mode 100644
index 38dec6d..0000000
--- a/trunk/hivex/LICENSE
+++ /dev/null
@@ -1,506 +0,0 @@
-This is the license for the hivex library.
-
-----------------------------------------------------------------------
-
- GNU LESSER GENERAL PUBLIC LICENSE
- Version 2.1, February 1999
-
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the Lesser GPL. It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
- This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it. You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-
- When we speak of free software, we are referring to freedom of use,
-not price. Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
- To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights. These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
- For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you. You must make sure that they, too, receive or can get the source
-code. If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it. And you must show them these terms so they know their rights.
-
- We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
- To protect each distributor, we want to make it very clear that
-there is no warranty for the free library. Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-
- Finally, software patents pose a constant threat to the existence of
-any free program. We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder. Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
- Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License. This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License. We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
- When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library. The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom. The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
- We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License. It also provides other free software developers Less
-of an advantage over competing non-free programs. These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries. However, the Lesser license provides advantages in certain
-special circumstances.
-
- For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard. To achieve this, non-free programs must be
-allowed to use the library. A more frequent case is that a free
-library does the same job as widely used non-free libraries. In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
- In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software. For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
- Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
- The precise terms and conditions for copying, distribution and
-modification follow. Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library". The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-
- GNU LESSER GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-
- A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
- The "Library", below, refers to any such software library or work
-which has been distributed under these terms. A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language. (Hereinafter, translation is
-included without limitation in the term "modification".)
-
- "Source code" for a work means the preferred form of the work for
-making modifications to it. For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-
- Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it). Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-
- 1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
- You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-
- 2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) The modified work must itself be a software library.
-
- b) You must cause the files modified to carry prominent notices
- stating that you changed the files and the date of any change.
-
- c) You must cause the whole of the work to be licensed at no
- charge to all third parties under the terms of this License.
-
- d) If a facility in the modified Library refers to a function or a
- table of data to be supplied by an application program that uses
- the facility, other than as an argument passed when the facility
- is invoked, then you must make a good faith effort to ensure that,
- in the event an application does not supply such function or
- table, the facility still operates, and performs whatever part of
- its purpose remains meaningful.
-
- (For example, a function in a library to compute square roots has
- a purpose that is entirely well-defined independent of the
- application. Therefore, Subsection 2d requires that any
- application-supplied function or table used by this function must
- be optional: if the application does not supply it, the square
- root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library. To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License. (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.) Do not make any other change in
-these notices.
-
- Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
- This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
- 4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
- If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library". Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
- However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library". The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
- When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library. The
-threshold for this to be true is not precisely defined by law.
-
- If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work. (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
- Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-
- 6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
- You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License. You must supply a copy of this License. If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License. Also, you must do one
-of these things:
-
- a) Accompany the work with the complete corresponding
- machine-readable source code for the Library including whatever
- changes were used in the work (which must be distributed under
- Sections 1 and 2 above); and, if the work is an executable linked
- with the Library, with the complete machine-readable "work that
- uses the Library", as object code and/or source code, so that the
- user can modify the Library and then relink to produce a modified
- executable containing the modified Library. (It is understood
- that the user who changes the contents of definitions files in the
- Library will not necessarily be able to recompile the application
- to use the modified definitions.)
-
- b) Use a suitable shared library mechanism for linking with the
- Library. A suitable mechanism is one that (1) uses at run time a
- copy of the library already present on the user's computer system,
- rather than copying library functions into the executable, and (2)
- will operate properly with a modified version of the library, if
- the user installs one, as long as the modified version is
- interface-compatible with the version that the work was made with.
-
- c) Accompany the work with a written offer, valid for at
- least three years, to give the same user the materials
- specified in Subsection 6a, above, for a charge no more
- than the cost of performing this distribution.
-
- d) If distribution of the work is made by offering access to copy
- from a designated place, offer equivalent access to copy the above
- specified materials from the same place.
-
- e) Verify that the user has already received a copy of these
- materials or that you have already sent this user a copy.
-
- For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it. However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
- It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system. Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-
- 7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
- a) Accompany the combined library with a copy of the same work
- based on the Library, uncombined with any other library
- facilities. This must be distributed under the terms of the
- Sections above.
-
- b) Give prominent notice with the combined library of the fact
- that part of it is a work based on the Library, and explaining
- where to find the accompanying uncombined form of the same work.
-
- 8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License. Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License. However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
- 9. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Library or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
- 10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-
- 11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all. For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded. In such case, this License incorporates the limitation as if
-written in the body of this License.
-
- 13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation. If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-
- 14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission. For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this. Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
- NO WARRANTY
-
- 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
- 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Libraries
-
- If you develop a new library, and you want it to be of the greatest
-possible use to the public, we recommend making it free software that
-everyone can redistribute and change. You can do so by permitting
-redistribution under these terms (or, alternatively, under the terms of the
-ordinary General Public License).
-
- To apply these terms, attach the following notices to the library. It is
-safest to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least the
-"copyright" line and a pointer to where the full notice is found.
-
- <one line to give the library's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with this library; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
-
-Also add information on how to contact you by electronic and paper mail.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the library, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the
- library `Frob' (a library for tweaking knobs) written by James Random Hacker.
-
- <signature of Ty Coon>, 1 April 1990
- Ty Coon, President of Vice
-
-That's all there is to it!
diff --git a/trunk/hivex/Makefile.am b/trunk/hivex/Makefile.am
deleted file mode 100644
index 80ea8cb..0000000
--- a/trunk/hivex/Makefile.am
+++ /dev/null
@@ -1,69 +0,0 @@
-# hivex
-# Copyright (C) 2009-2011 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-ACLOCAL_AMFLAGS = -I m4
-
-# Work around broken libtool.
-export to_tool_file_cmd=func_convert_file_noop
-
-SUBDIRS = gnulib/lib generator lib images gnulib/tests xml po
-
-if HAVE_HIVEXSH
-SUBDIRS += sh
-endif
-
-if HAVE_OCAML
-SUBDIRS += ocaml
-endif
-
-if HAVE_PERL
-SUBDIRS += perl regedit
-endif
-
-if HAVE_PYTHON
-SUBDIRS += python
-endif
-
-if HAVE_RUBY
-SUBDIRS += ruby
-endif
-
-EXTRA_DIST = hivex.pc hivex.pc.in LICENSE README tx-pull.sh
-
-# Generate the ChangeLog automatically from the gitlog.
-dist-hook:
- $(top_srcdir)/build-aux/gitlog-to-changelog > ChangeLog
- cp ChangeLog $(distdir)/ChangeLog
-
-# Pkgconfig.
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = hivex.pc
-
-# Maintainer website update.
-HTMLFILES = \
- html/hivex.3.html \
- html/hivexget.1.html \
- html/hivexml.1.html \
- html/hivexregedit.1.html \
- html/hivexsh.1.html
-
-WEBSITEDIR = $(HOME)/d/redhat/websites/libguestfs
-
-website: $(HTMLFILES)
- cp $(HTMLFILES) $(WEBSITEDIR)
-
-CLEANFILES = $(HTMLFILES) pod2*.tmp
diff --git a/trunk/hivex/README b/trunk/hivex/README
deleted file mode 100644
index ae3d159..0000000
--- a/trunk/hivex/README
+++ /dev/null
@@ -1,106 +0,0 @@
-hivex - by Richard W.M. Jones, rjones@redhat.com
-Copyright (C) 2009-2010 Red Hat Inc.
-----------------------------------------------------------------------
-
-This is a self-contained library for reading and writing Windows
-Registry "hive" binary files.
-
-Unlike many other tools in this area, it doesn't use the textual .REG
-format for output, because parsing that is as much trouble as parsing
-the original binary format. Instead it makes the file available
-through a C API, or there is a separate program to export the hive as
-XML.
-
-This library was derived from several sources:
-
- . NTREG registry reader/writer library by Petter Nordahl-Hagen
- (LGPL v2.1 licensed library and program)
- . http://pogostick.net/~pnh/ntpasswd/WinReg.txt
- . dumphive (a BSD-licensed Pascal program by Markus Stephany)
- . http://www.sentinelchicken.com/data/TheWindowsNTRegistryFileFormat.pdf
- . editreg program from Samba - this program was removed in later
- versions of Samba, so you have to go back in the source repository
- to find it (GPLv2+)
- . http://amnesia.gtisc.gatech.edu/~moyix/suzibandit.ltd.uk/MSc/
- . reverse engineering the format (see lib/tools/visualizer.ml)
-
-Like NTREG, this library only attempts to read Windows NT registry
-files (ie. not Windows 3.1 or Windows 95/98/ME). See the link above
-for documentation on the older formats if you wish to read them.
-
-Unlike NTREG, this code is much more careful about handling error
-cases, corrupt and malicious registry files, and endianness.
-
-License
--------
-
-The license for this library is LGPL v2.1, but not later versions.
-For full details, see the file LICENSE in this directory.
-
-Dependencies
-------------
-
-To just build the library, the dependencies are quite minimal. You
-only need the following:
-
-- An ISO C compiler.
-
-- Perl tools 'pod2man' and 'pod2text'.
-
-These dependencies are needed for the tools:
-
-- Readline library (optional, to add command-line editing to hivexsh).
-
-- libxml2 (optional, for hivexml).
-
-If you want to make the generated files or change the API, then you
-will need the OCaml interpreter (/usr/bin/ocaml).
-
-To build the language bindings, you will need various extra packages.
-See the configure output for more details.
-
-Directories and tools
----------------------
-
-generator/
-
- Generator used to write a lot of boilerplate code for
- header files, documentation, language bindings etc.
- The API for hivex is specified in the generator.
-
-images/
-
- Test hive files. See images/README.
-
-lib/
-
- The C library.
-
-ocaml/
-
- OCaml bindings and tests. The bindings are generated by
- 'generator/generator.ml'.
-
-perl/
-
- Perl bindings and tests. The bindings are generated by
- 'generator/generator.ml'.
-
-python/
-
- NOTE: Python bindings are not yet written. Your patches
- are welcome (please modify generator/generator.ml to
- add them).
-
-regedit/
- Regedit-like registry merging tool.
-
-sh/
-
- Interactive shell. This also contains the old 'hivexget'
- tool (originally written in C, now replaced by a hivexsh
- shell script).
-
-xml/
-
- hivexml program which converts hive files to XML.
diff --git a/trunk/hivex/TODO b/trunk/hivex/TODO
deleted file mode 100644
index e2c688c..0000000
--- a/trunk/hivex/TODO
+++ /dev/null
@@ -1,2 +0,0 @@
-Add a command to hivexsh to allow updating a single value
-(ie. implement a shell equivalent of hivex_node_set_value).
diff --git a/trunk/hivex/autogen.sh b/trunk/hivex/autogen.sh
deleted file mode 100755
index 4017d32..0000000
--- a/trunk/hivex/autogen.sh
+++ /dev/null
@@ -1,58 +0,0 @@
-#!/bin/bash -
-# hivex
-# Copyright (C) 2009-2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-# Rebuild the autotools environment.
-
-set -e
-set -v
-
-# Ensure that whenever we pull in a gnulib update or otherwise change to a
-# different version (i.e., when switching branches), we also rerun ./bootstrap.
-curr_status=.git-module-status
-t=$(git submodule status)
-if test "$t" = "$(cat $curr_status 2>/dev/null)"; then
- : # good, it's up to date
-else
- echo running bootstrap...
- ./bootstrap && echo "$t" > $curr_status
-fi
-
-CONFIGUREDIR=.
-
-# Run configure in BUILDDIR if it's set
-if [ ! -z "$BUILDDIR" ]; then
- mkdir -p $BUILDDIR
- cd $BUILDDIR
-
- CONFIGUREDIR=..
-fi
-
-# Rerun the generator (requires OCaml interpreter). This is *not* for
-# anything that is required at configure-time when configure is run
-# from a distribution tarball. From those, nothing ocaml-related is
-# required.
-mkdir -p perl/lib/Win
-./generator/generator.ml
-
-# If no arguments were specified and configure has run before, use the previous
-# arguments
-if test $# = 0 && test -x ./config.status; then
- ./config.status --recheck
-else
- $CONFIGUREDIR/configure "$@"
-fi
diff --git a/trunk/hivex/bootstrap b/trunk/hivex/bootstrap
deleted file mode 100755
index b2960c1..0000000
--- a/trunk/hivex/bootstrap
+++ /dev/null
@@ -1,89 +0,0 @@
-#!/bin/sh
-
-usage() {
- echo >&2 "\
-Usage: $0 [OPTION]...
-Bootstrap this package from the checked-out sources.
-"
-}
-
-for option
-do
- case $option in
- --help)
- usage
- exit;;
- *)
- echo >&2 "$0: $option: unknown option"
- exit 1;;
- esac
-done
-
-# Get gnulib files.
-
-echo "$0: getting gnulib files..."
-git submodule init || exit $?
-git submodule update || exit $?
-GNULIB_SRCDIR=.gnulib
-
-ls po/*.po 2>/dev/null | sed 's|.*/||; s|\.po$||' > po/LINGUAS
-
-# Run autopoint, to get po/Makevars.template:
-# Also, released autopoint has the tendency to install macros that have
-# been obsoleted in current gnulib, so run this before gnulib-tool.
-autopoint --force
-
-# Autoreconf runs aclocal before libtoolize, which causes spurious
-# warnings if the initial aclocal is confused by the libtoolized
-# (or worse out-of-date) macro directory.
-libtoolize --copy --install || glibtoolize --copy --install
-
-# Create gettext configuration.
-echo "$0: Creating po/Makevars from po/Makevars.template ..."
-rm -f po/Makevars
-sed '
- /^EXTRA_LOCALE_CATEGORIES *=/s/=.*/= '"$EXTRA_LOCALE_CATEGORIES"'/
- /^MSGID_BUGS_ADDRESS *=/s/=.*/= '"$MSGID_BUGS_ADDRESS"'/
- /^XGETTEXT_OPTIONS *=/{
- s/$/ \\/
- a\
- '"$XGETTEXT_OPTIONS"' $${end_of_xgettext_options+}
- }
-' po/Makevars.template >po/Makevars
-
-gnulib_tool=$GNULIB_SRCDIR/gnulib-tool
-<$gnulib_tool || exit
-
-modules='
-byteswap
-c-ctype
-fcntl
-full-read
-full-write
-gitlog-to-changelog
-gnu-make
-gnumakefile
-ignore-value
-inttypes
-maintainer-makefile
-manywarnings
-progname
-strndup
-vasprintf
-vc-list-files
-warnings
-xstrtol
-xstrtoll
-'
-
-$gnulib_tool \
- --libtool \
- --avoid=dummy \
- --with-tests \
- --m4-base=m4 \
- --source-base=gnulib/lib \
- --tests-base=gnulib/tests \
- --import $modules
-
-# Disable autopoint and libtoolize, since they were already done above.
-AUTOPOINT=true LIBTOOLIZE=true autoreconf --verbose --install
diff --git a/trunk/hivex/cfg.mk b/trunk/hivex/cfg.mk
deleted file mode 100644
index 528f722..0000000
--- a/trunk/hivex/cfg.mk
+++ /dev/null
@@ -1,24 +0,0 @@
-# Tests not to run as part of "make distcheck".
-local-checks-to-skip = \
- sc_prohibit_strcmp \
- sc_two_space_separator_in_usage \
- sc_prohibit_magic_number_exit \
- sc_file_system \
- sc_GPL_version \
- sc_bindtextdomain \
- sc_makefile_path_separator_check \
- sc_program_name
-
-gnulib_dir = .gnulib
-
-exclude_file_name_regexp--sc_trailing_blank = \
- ^sh/hivexsh\.pod$$
-
-_img_regexp = ^images/(minimal|rlenvalue_test_hive)$$
-exclude_file_name_regexp--sc_prohibit_empty_lines_at_EOF = $(_img_regexp)
-exclude_file_name_regexp--sc_trailing_blank = $(_img_regexp)
-
-exclude_file_name_regexp--sc_useless_cpp_parens = \
- ^lib/gettext\.h$$
-
-config_h_header ?= ["<](hivex|config)\.h[>"]
diff --git a/trunk/hivex/configure.ac b/trunk/hivex/configure.ac
deleted file mode 100644
index ce42785..0000000
--- a/trunk/hivex/configure.ac
+++ /dev/null
@@ -1,597 +0,0 @@
-# hivex
-# Copyright (C) 2009-2011 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# major/minor/release must be numbers
-m4_define([hivex_major], [1])
-m4_define([hivex_minor], [3])
-m4_define([hivex_release], [7])
-# extra can be any string
-m4_define([hivex_extra], [])
-
-AC_INIT([hivex],hivex_major.hivex_minor.hivex_release[]hivex_extra)
-AC_CONFIG_AUX_DIR([build-aux])
-AM_INIT_AUTOMAKE([foreign])
-
-m4_ifndef([AM_SILENT_RULES], [m4_define([AM_SILENT_RULES],[])])
-AM_SILENT_RULES([yes]) # make --enable-silent-rules the default.
-
-AC_CONFIG_MACRO_DIR([m4])
-
-dnl Split up the version string.
-AC_DEFINE([PACKAGE_VERSION_MAJOR],[hivex_major],[Major version number])
-AC_DEFINE([PACKAGE_VERSION_MINOR],[hivex_minor],[Minor version number])
-AC_DEFINE([PACKAGE_VERSION_RELEASE],[hivex_release],[Release number])
-AC_DEFINE([PACKAGE_VERSION_EXTRA],["hivex_extra"],[Extra version string])
-
-gl_EARLY
-gl_INIT
-
-AM_PROG_LIBTOOL
-
-dnl Define $(SED).
-m4_ifdef([AC_PROG_SED],[
- AC_PROG_SED
-],[
- dnl ... else hope for the best
- AC_SUBST([SED], "sed")
-])
-
-dnl Check for basic C environment.
-AC_PROG_CC_STDC
-AC_PROG_INSTALL
-AC_PROG_CPP
-
-AC_ARG_ENABLE([gcc-warnings],
- [AS_HELP_STRING([--enable-gcc-warnings],
- [turn on lots of GCC warnings (for developers)])],
- [case $enableval in
- yes|no) ;;
- *) AC_MSG_ERROR([bad value $enableval for gcc-warnings option]) ;;
- esac
- gl_gcc_warnings=$enableval],
- [gl_gcc_warnings=no]
-)
-
-if test "$gl_gcc_warnings" = yes; then
- gl_WARN_ADD([-Werror], [WERROR_CFLAGS])
- AC_SUBST([WERROR_CFLAGS])
-
- nw=
- # This, $nw, is the list of warnings we disable.
- nw="$nw -Wdeclaration-after-statement" # too useful to forbid
- nw="$nw -Waggregate-return" # anachronistic
- nw="$nw -Wc++-compat" # We don't care about C++ compilers
- nw="$nw -Wundef" # Warns on '#if GNULIB_FOO' etc in gnulib
- nw="$nw -Wtraditional" # Warns on #elif which we use often
- nw="$nw -Wcast-qual" # Too many warnings for now
- nw="$nw -Wconversion" # Too many warnings for now
- nw="$nw -Wsystem-headers" # Don't let system headers trigger warnings
- nw="$nw -Wsign-conversion" # Too many warnings for now
- nw="$nw -Wtraditional-conversion" # Too many warnings for now
- nw="$nw -Wunreachable-code" # Too many warnings for now
- nw="$nw -Wpadded" # Our structs are not padded
- nw="$nw -Wredundant-decls" # openat.h declares e.g., mkdirat
- nw="$nw -Wlogical-op" # any use of fwrite provokes this
- nw="$nw -Wvla" # two warnings in mount.c
- # things I might fix soon:
- nw="$nw -Wmissing-format-attribute" # daemon.h's asprintf_nowarn
- nw="$nw -Winline" # daemon.h's asprintf_nowarn
- nw="$nw -Wshadow" # numerous, plus we're not unanimous
- # ?? -Wstrict-overflow
- nw="$nw -Wunsafe-loop-optimizations" # just a warning that an optimization
- # was not possible, safe to ignore
- nw="$nw -Wpacked" # Allow attribute((packed)) on structs
- nw="$nw -Wlong-long" # Allow long long since it's required
- # by xstrtoll.
- nw="$nw -Wsuggest-attribute=pure" # Don't suggest pure functions.
-# nw="$nw -Wsuggest-attribute=const" # Don't suggest const functions.
-# nw="$nw -Wunsuffixed-float-constants" # Don't care about these.
-
- gl_MANYWARN_ALL_GCC([ws])
- gl_MANYWARN_COMPLEMENT([ws], [$ws], [$nw])
- for w in $ws; do
- gl_WARN_ADD([$w])
- done
-
- # Unused parameters are not a bug in C.
- gl_WARN_ADD([-Wno-unused-parameter])
-
- # Missing field initializers is not a bug in C.
- gl_WARN_ADD([-Wno-missing-field-initializers])
-
- # In spite of excluding -Wlogical-op above, it is enabled, as of
- # gcc 4.5.0 20090517, and it provokes warnings in cat.c, dd.c, truncate.c
- gl_WARN_ADD([-Wno-logical-op])
-
- gl_WARN_ADD([-fdiagnostics-show-option])
-
- AC_SUBST([WARN_CFLAGS])
-
- AC_DEFINE([lint], [1], [Define to 1 if the compiler is checking for lint.])
- AC_DEFINE([_FORTIFY_SOURCE], [2],
- [enable compile-time and run-time bounds-checking, and some warnings])
- AC_DEFINE([GNULIB_PORTCHECK], [1], [enable some gnulib portability checks])
-fi
-
-AC_C_PROTOTYPES
-test "x$U" != "x" && AC_MSG_ERROR([Compiler not ANSI compliant])
-
-AM_PROG_CC_C_O
-
-dnl Work out how to specify the linker script to the linker.
-VERSION_SCRIPT_FLAGS=-Wl,--version-script=
-`/usr/bin/ld --help 2>&1 | grep -- --version-script >/dev/null` || \
- VERSION_SCRIPT_FLAGS="-Wl,-M -Wl,"
-AC_SUBST(VERSION_SCRIPT_FLAGS)
-
-dnl Check support for 64 bit file offsets.
-AC_SYS_LARGEFILE
-
-dnl Check sizeof long.
-AC_CHECK_SIZEOF([long])
-
-dnl Headers.
-AC_CHECK_HEADERS([byteswap.h endian.h libintl.h])
-
-dnl Check for mmap
-AC_REPLACE_FUNCS([mmap])
-
-dnl Functions.
-AC_CHECK_FUNCS([bindtextdomain])
-
-dnl Check for pod2man and pod2text.
-AC_CHECK_PROG([POD2MAN],[pod2man],[pod2man],[no])
-test "x$POD2MAN" = "xno" &&
- AC_MSG_ERROR([pod2man must be installed])
-AC_CHECK_PROG([POD2TEXT],[pod2text],[pod2text],[no])
-test "x$POD2TEXT" = "xno" &&
- AC_MSG_ERROR([pod2text must be installed])
-
-dnl Readline.
-AC_ARG_WITH([readline],
- [AS_HELP_STRING([--with-readline],
- [support fancy command line editing @<:@default=check@:>@])],
- [],
- [with_readline=check])
-
-LIBREADLINE=
-AS_IF([test "x$with_readline" != xno],
- [AC_CHECK_LIB([readline], [main],
- [AC_SUBST([LIBREADLINE], ["-lreadline"])
- AC_DEFINE([HAVE_LIBREADLINE], [1],
- [Define if you have libreadline])
- ],
- [if test "x$with_readline" != xcheck; then
- AC_MSG_FAILURE(
- [--with-readline was given, but test for readline failed])
- fi
- ])])
-
-dnl For i18n.
-AM_GNU_GETTEXT([external])
-AM_GNU_GETTEXT_VERSION([0.17])
-AM_ICONV
-
-dnl libxml2.
-PKG_CHECK_MODULES([LIBXML2], [libxml-2.0])
-AC_SUBST([LIBXML2_CFLAGS])
-AC_SUBST([LIBXML2_LIBS])
-
-dnl hivexsh depends on open_memstream, which is absent on OS X.
-AC_CHECK_FUNC([open_memstream])
-AM_CONDITIONAL([HAVE_HIVEXSH],[test "x$ac_cv_func_open_memstream" = "xyes"])
-
-dnl Check for OCaml (optional, for OCaml bindings).
-OCAMLC=no
-OCAMLFIND=no
-AC_ARG_ENABLE([ocaml],
- AS_HELP_STRING([--disable-ocaml], [Disable OCaml language bindings]),
- [],
- [enable_ocaml=yes])
-AS_IF([test "x$enable_ocaml" != "xno"],
- [dnl OCAMLC and OCAMLFIND have to be unset first, otherwise
- dnl AC_CHECK_TOOL (inside AC_PROG_OCAML) will not look.
- OCAMLC=
- OCAMLFIND=
- AC_PROG_OCAML
- AC_PROG_FINDLIB
- ])
-AM_CONDITIONAL([HAVE_OCAML],
- [test "x$OCAMLC" != "xno" && test "x$OCAMLFIND" != "xno"])
-AM_CONDITIONAL([HAVE_OCAMLOPT],
- [test "x$OCAMLOPT" != "xno" && test "x$OCAMLFIND" != "xno"])
-
-if test "x$OCAMLC" != "xno" && test "x$OCAMLFIND" != "xno"; then
- dnl Check if we have caml/unixsupport.h header (OCaml bindings only).
- old_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -I$OCAMLLIB"
- AC_CHECK_HEADERS([caml/unixsupport.h],[],[],
- [
- #include <caml/config.h>
- #include <caml/mlvalues.h>
- ])
- CFLAGS="$old_CFLAGS"
-
- dnl Do we have function caml_raise_with_args?
- f=caml_raise_with_args
- AC_MSG_CHECKING([for function $f])
- echo "char $f (); char foo() { return $f (); }" > conftest.c
- rm -f conftest_ml.ml
- touch conftest_ml.ml
- if $OCAMLC -c conftest.c >&AS_MESSAGE_LOG_FD 2>&1 && \
- $OCAMLC -c conftest_ml.ml >&AS_MESSAGE_LOG_FD 2>&1 && \
- $OCAMLC -custom conftest.o conftest_ml.cmo -o conftest >&AS_MESSAGE_LOG_FD 2>&1 ; then
- AC_DEFINE([HAVE_CAML_RAISE_WITH_ARGS],[1],
- [Defined if function caml_raise_with_args exists.])
- AC_MSG_RESULT([found])
- else
- AC_MSG_RESULT([not found])
- fi
- rm -f conftest conftest.* conftest_ml.*
-fi
-
-dnl Check for Perl (optional, for Perl bindings and Perl tools).
-AC_CHECK_PROG([PERL],[perl],[perl],[no])
-
-AC_ARG_ENABLE([perl],
- AS_HELP_STRING([--disable-perl], [Disable Perl language bindings]),
- [],
- [enable_perl=yes])
-AS_IF([test "x$enable_perl" != "xno"],[
- dnl Check for Perl modules that must be present to compile and
- dnl test the Perl bindings.
- missing_perl_modules=no
- for pm in Test::More ExtUtils::MakeMaker IO::Stringy; do
- AC_MSG_CHECKING([for $pm])
- if ! $PERL -M$pm -e1 >/dev/null 2>&1; then
- AC_MSG_RESULT([no])
- missing_perl_modules=yes
- else
- AC_MSG_RESULT([yes])
- fi
- done
- if test "x$missing_perl_modules" = "xyes"; then
- AC_MSG_WARN([some Perl modules required to compile or test the Perl bindings are missing])
- fi
- ])
-AM_CONDITIONAL([HAVE_PERL],
- [test "x$enable_perl" != "xno" && test "x$PERL" != "xno" && test "x$missing_perl_modules" != "xyes"])
-
-dnl Check for Python (optional, for Python bindings).
-PYTHON_PREFIX=
-PYTHON_VERSION=
-PYTHON_CFLAGS=
-PYTHON_INSTALLDIR=
-
-AC_ARG_ENABLE([python],
- AS_HELP_STRING([--disable-python], [Disable Python language bindings]),
- [],
- [enable_python=yes])
-AS_IF([test "x$enable_python" != "xno"],
- [
- AC_CHECK_PROG([PYTHON],[python],[python],[no])
-
- if test "x$PYTHON" != "xno"; then
- AC_MSG_CHECKING([Python prefix])
- PYTHON_PREFIX=`$PYTHON -c "import sys; print (sys.prefix)"`
- AC_MSG_RESULT([$PYTHON_PREFIX])
-
- AC_MSG_CHECKING([Python version])
- PYTHON_VERSION_MAJOR=`$PYTHON -c "import sys; print (sys.version_info@<:@0@:>@)"`
- PYTHON_VERSION_MINOR=`$PYTHON -c "import sys; print (sys.version_info@<:@1@:>@)"`
- PYTHON_VERSION="$PYTHON_VERSION_MAJOR.$PYTHON_VERSION_MINOR"
- AC_MSG_RESULT([$PYTHON_VERSION])
-
- AC_MSG_CHECKING([for Python include path])
- if test -z "$PYTHON_CFLAGS"; then
- python_path=`$PYTHON -c "import distutils.sysconfig; \
- print (distutils.sysconfig.get_python_inc ());"`
- python_platpath=`$PYTHON -c "import distutils.sysconfig; \
- print (distutils.sysconfig.get_python_inc (plat_specific=1));"`
- if test "$python_path" = "$python_platpath"; then
- PYTHON_CFLAGS=-I$python_path
- else
- PYTHON_CFLAGS="-I$python_path -I$python_platpath"
- fi
- fi
- AC_MSG_RESULT([$PYTHON_CFLAGS])
-
- AC_ARG_WITH([python-installdir],
- [AS_HELP_STRING([--with-python-installdir],
- [directory to install python modules @<:@default=check@:>@])],
- [PYTHON_INSTALLDIR="$withval"
- AC_MSG_NOTICE([Python install dir $PYTHON_INSTALLDIR])],
- [PYTHON_INSTALLDIR=check])
-
- if test "x$PYTHON_INSTALLDIR" = "xcheck"; then
- PYTHON_INSTALLDIR=
- AC_MSG_CHECKING([for Python site-packages path])
- if test -z "$PYTHON_INSTALLDIR"; then
- PYTHON_INSTALLDIR=`$PYTHON -c "import distutils.sysconfig; \
- print (distutils.sysconfig.get_python_lib(1,0));"`
- fi
- AC_MSG_RESULT([$PYTHON_INSTALLDIR])
- fi
-
- AC_MSG_CHECKING([for Python extension suffix (PEP-3149)])
- if test -z "$PYTHON_EXT_SUFFIX"; then
- python_ext_suffix=`$PYTHON -c "import sysconfig; \
- print (sysconfig.get_config_var('EXT_SUFFIX') or sysconfig.get_config_var('SO'))"`
- PYTHON_EXT_SUFFIX=$python_ext_suffix
- fi
- AC_MSG_RESULT([$PYTHON_EXT_SUFFIX])
-
- dnl Look for some optional symbols in libpython.
- old_LIBS="$LIBS"
-
- PYTHON_BLDLIBRARY=`$PYTHON -c "import distutils.sysconfig; \
- print (distutils.sysconfig.get_config_var('BLDLIBRARY'))"`
- AC_CHECK_LIB([c],[PyCapsule_New],
- [AC_DEFINE([HAVE_PYCAPSULE_NEW],1,
- [Found PyCapsule_New in libpython])],
- [],[$PYTHON_BLDLIBRARY])
- AC_CHECK_LIB([c],[PyString_AsString],
- [AC_DEFINE([HAVE_PYSTRING_ASSTRING],1,
- [Found PyString_AsString in libpython])],
- [],[$PYTHON_BLDLIBRARY])
-
- LIBS="$old_LIBS"
- fi
-
- AC_SUBST(PYTHON_PREFIX)
- AC_SUBST(PYTHON_VERSION)
- AC_SUBST(PYTHON_CFLAGS)
- AC_SUBST(PYTHON_INSTALLDIR)
- AC_SUBST(PYTHON_EXT_SUFFIX)
- ])
-AM_CONDITIONAL([HAVE_PYTHON],
- [test "x$PYTHON" != "xno" && test "x$PYTHON_CFLAGS" != "x" && test "x$PYTHON_INSTALLDIR" != "x"])
-
-dnl Check for Ruby and rake (optional, for Ruby bindings).
-AC_ARG_ENABLE([ruby],
- AS_HELP_STRING([--disable-ruby], [Disable Ruby language bindings]),
- [],
- [enable_ruby=yes])
-AS_IF([test "x$enable_ruby" != "xno"],[
- AC_CHECK_PROG([RUBY],[ruby],[ruby],[no])
- AC_CHECK_PROG([RAKE],[rake],[rake],[no])
-
- AS_IF([test -n "$RUBY" && test -n "$RAKE"],[
- dnl Find the library. Note on Debian it's not -lruby.
- AC_MSG_CHECKING([for C library for Ruby extensions])
- ruby_cmd='puts RbConfig::CONFIG@<:@"RUBY_SO_NAME"@:>@'
- echo running: $RUBY -rrbconfig -e \'$ruby_cmd\' >&AS_MESSAGE_LOG_FD
- $RUBY -rrbconfig -e "$ruby_cmd" >conftest 2>&AS_MESSAGE_LOG_FD
- libruby="$(cat conftest)"
- rm conftest
- AS_IF([test -n "$libruby"],[
- AC_MSG_RESULT([-l$libruby])
- AC_CHECK_LIB([$libruby],[ruby_init],
- [have_libruby=1],[have_libruby=])
-
- dnl Symbols that we substitute when missing.
- AS_IF([test -n "$have_libruby"],[
- old_LIBS="$LIBS"
- LIBS="$LIBS -l$libruby"
- AC_CHECK_FUNCS([rb_hash_lookup])
- LIBS="$old_LIBS"
- ])
- ],[
- AC_MSG_RESULT([not found])
- ])
- ])
-])
-AM_CONDITIONAL([HAVE_RUBY],
- [test -n "$RUBY" && test -n "$RAKE" && test -n "$have_libruby"])
-
-dnl dnl Check for Java.
-dnl AC_ARG_WITH(java_home,
-dnl [AS_HELP_STRING([--with-java-home],
-dnl [specify path to JDK directory @<:@default=check@:>@])],
-dnl [],
-dnl [with_java_home=check])
-
-dnl if test "x$with_java_home" != "xno"; then
-dnl if test "x$with_java_home" != "xyes" && test "x$with_java_home" != "xcheck"
-dnl then
-dnl # Reject unsafe characters in $JAVA_HOME
-dnl jh_lf='
-dnl '
-dnl case $JAVA_HOME in
-dnl *[\\\"\#\$\&\'\`$jh_lf\ \ ]*)
-dnl AC_MSG_FAILURE([unsafe \$JAVA_HOME directory (use --with-java-home=no to disable Java support)]);;
-dnl esac
-dnl if test -d "$with_java_home"; then
-dnl JAVA_HOME="$with_java_home"
-dnl else
-dnl AC_MSG_FAILURE([$with_java_home is not a directory (use --with-java-home=no to disable Java support)])
-dnl fi
-dnl fi
-
-dnl if test "x$JAVA_HOME" = "x"; then
-dnl # Look for Java in some likely locations.
-dnl for d in \
-dnl /usr/lib/jvm/java \
-dnl /usr/lib/jvm/java-6-openjdk
-dnl do
-dnl if test -d $d && test -f $d/bin/java; then
-dnl JAVA_HOME=$d
-dnl break
-dnl fi
-dnl done
-dnl fi
-
-dnl if test "x$JAVA_HOME" != "x"; then
-dnl AC_MSG_CHECKING(for JDK in $JAVA_HOME)
-dnl if test ! -x "$JAVA_HOME/bin/java"; then
-dnl AC_MSG_ERROR([missing $JAVA_HOME/bin/java binary (use --with-java-home=no to disable Java support)])
-dnl else
-dnl JAVA="$JAVA_HOME/bin/java"
-dnl fi
-dnl if test ! -x "$JAVA_HOME/bin/javac"; then
-dnl AC_MSG_ERROR([missing $JAVA_HOME/bin/javac binary])
-dnl else
-dnl JAVAC="$JAVA_HOME/bin/javac"
-dnl fi
-dnl if test ! -x "$JAVA_HOME/bin/javah"; then
-dnl AC_MSG_ERROR([missing $JAVA_HOME/bin/javah binary])
-dnl else
-dnl JAVAH="$JAVA_HOME/bin/javah"
-dnl fi
-dnl if test ! -x "$JAVA_HOME/bin/javadoc"; then
-dnl AC_MSG_ERROR([missing $JAVA_HOME/bin/javadoc binary])
-dnl else
-dnl JAVADOC="$JAVA_HOME/bin/javadoc"
-dnl fi
-dnl if test ! -x "$JAVA_HOME/bin/jar"; then
-dnl AC_MSG_ERROR([missing $JAVA_HOME/bin/jar binary])
-dnl else
-dnl JAR="$JAVA_HOME/bin/jar"
-dnl fi
-dnl java_version=`$JAVA -version 2>&1 | grep "java version"`
-dnl AC_MSG_RESULT(found $java_version in $JAVA_HOME)
-
-dnl dnl Find jni.h.
-dnl AC_MSG_CHECKING([for jni.h])
-dnl if test -f "$JAVA_HOME/include/jni.h"; then
-dnl JNI_CFLAGS="-I$JAVA_HOME/include"
-dnl else
-dnl if test "`find $JAVA_HOME -name jni.h`" != ""; then
-dnl head=`find $JAVA_HOME -name jni.h | tail -1`
-dnl dir=`dirname "$head"`
-dnl JNI_CFLAGS="-I$dir"
-dnl else
-dnl AC_MSG_FAILURE([missing jni.h header file])
-dnl fi
-dnl fi
-dnl AC_MSG_RESULT([$JNI_CFLAGS])
-
-dnl dnl Find jni_md.h.
-dnl AC_MSG_CHECKING([for jni_md.h])
-dnl case "$build_os" in
-dnl *linux*) system="linux" ;;
-dnl *SunOS*) system="solaris" ;;
-dnl *cygwin*) system="win32" ;;
-dnl *) system="$build_os" ;;
-dnl esac
-dnl if test -f "$JAVA_HOME/include/$system/jni_md.h"; then
-dnl JNI_CFLAGS="$JNI_CFLAGS -I$JAVA_HOME/include/$system"
-dnl else
-dnl if test "`find $JAVA_HOME -name jni_md.h`" != ""; then
-dnl head=`find $JAVA_HOME -name jni_md.h | tail -1`
-dnl dir=`dirname "$head"`
-dnl JNI_CFLAGS="$JNI_CFLAGS -I$dir"
-dnl else
-dnl AC_MSG_FAILURE([missing jni_md.h header file])
-dnl fi
-dnl fi
-dnl AC_MSG_RESULT([$JNI_CFLAGS])
-
-dnl dnl Need extra version flag?
-dnl AC_MSG_CHECKING([extra javac flags])
-dnl JAVAC_FLAGS=
-dnl javac_version=`$JAVAC -version 2>&1`
-dnl case "$javac_version" in
-dnl *Eclipse*)
-dnl JAVAC_FLAGS="-source 1.5" ;;
-dnl esac
-dnl AC_MSG_RESULT([$JAVAC_FLAGS])
-
-dnl dnl Where to install jarfiles.
-dnl dnl XXX How to make it configurable?
-dnl JAR_INSTALL_DIR=\${prefix}/share/java
-dnl JNI_INSTALL_DIR=\${libdir}
-
-dnl dnl JNI version.
-dnl jni_major_version=`echo "$VERSION" | awk -F. '{print $1}'`
-dnl jni_minor_version=`echo "$VERSION" | awk -F. '{print $2}'`
-dnl jni_micro_version=`echo "$VERSION" | awk -F. '{print $3}'`
-dnl JNI_VERSION_INFO=`expr "$jni_major_version" + "$jni_minor_version"`":$jni_micro_version:$jni_minor_version"
-dnl fi
-dnl fi
-
-dnl AC_SUBST(JAVA_HOME)
-dnl AC_SUBST(JAVA)
-dnl AC_SUBST(JAVAC)
-dnl AC_SUBST(JAVAH)
-dnl AC_SUBST(JAVADOC)
-dnl AC_SUBST(JAR)
-dnl AC_SUBST(JNI_CFLAGS)
-dnl AC_SUBST(JAVAC_FLAGS)
-dnl AC_SUBST(JAR_INSTALL_DIR)
-dnl AC_SUBST(JNI_INSTALL_DIR)
-dnl AC_SUBST(JNI_VERSION_INFO)
-
-dnl AM_CONDITIONAL([HAVE_JAVA],[test -n "$JAVAC"])
-
-dnl dnl Check for Haskell (GHC).
-dnl AC_CHECK_PROG([GHC],[ghc],[ghc],[no])
-
-dnl AM_CONDITIONAL([HAVE_HASKELL],
-dnl [test "x$GHC" != "xno"])
-
-dnl Produce output files.
-AC_CONFIG_HEADERS([config.h])
-AC_CONFIG_FILES([Makefile
- generator/Makefile
- gnulib/lib/Makefile
- gnulib/tests/Makefile
- hivex.pc
- images/Makefile
- lib/Makefile
- lib/tools/Makefile
- ocaml/Makefile ocaml/META
- perl/Makefile perl/Makefile.PL
- python/Makefile
- po/Makefile.in
- regedit/Makefile
- ruby/Makefile ruby/Rakefile
- sh/Makefile
- xml/Makefile])
-AC_CONFIG_FILES([python/run-python-tests], [chmod +x python/run-python-tests])
-AC_OUTPUT
-
-dnl Produce summary.
-echo
-echo
-echo "------------------------------------------------------------"
-echo "Thank you for downloading $PACKAGE_STRING"
-echo
-echo "This is how we have configured the optional components for you today:"
-echo
-echo -n "OCaml bindings ...................... "
-if test "x$HAVE_OCAML_TRUE" = "x"; then echo "yes"; else echo "no"; fi
-echo -n "Perl bindings ....................... "
-if test "x$HAVE_PERL_TRUE" = "x"; then echo "yes"; else echo "no"; fi
-echo -n "Python bindings ..................... "
-if test "x$HAVE_PYTHON_TRUE" = "x"; then echo "yes"; else echo "no"; fi
-echo -n "Ruby bindings ....................... "
-if test "x$HAVE_RUBY_TRUE" = "x"; then echo "yes"; else echo "no"; fi
-dnl echo -n "Java bindings ....................... "
-dnl if test "x$HAVE_JAVA_TRUE" = "x"; then echo "yes"; else echo "no"; fi
-dnl echo -n "Haskell bindings .................... "
-dnl if test "x$HAVE_HASKELL" = "x"; then echo "yes"; else echo "no"; fi
-echo
-echo "If any optional component is configured 'no' when you expected 'yes'"
-echo "then you should check the preceeding messages."
-echo
-echo "Please report bugs back to the mailing list:"
-echo "http://www.redhat.com/mailman/listinfo/libguestfs"
-echo
-echo "Next you should type 'make' to build the package,"
-echo "then 'make check' to run the tests."
-echo "------------------------------------------------------------"
diff --git a/trunk/hivex/generator/Makefile.am b/trunk/hivex/generator/Makefile.am
deleted file mode 100644
index 514e1d0..0000000
--- a/trunk/hivex/generator/Makefile.am
+++ /dev/null
@@ -1,20 +0,0 @@
-# hivex
-# Copyright (C) 2009-2011 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-EXTRA_DIST = generator.ml
-
-CLEANFILES = stamp-generator
diff --git a/trunk/hivex/generator/generator.ml b/trunk/hivex/generator/generator.ml
deleted file mode 100755
index 54e5f0f..0000000
--- a/trunk/hivex/generator/generator.ml
+++ /dev/null
@@ -1,3776 +0,0 @@
-#!/usr/bin/env ocaml
-(* hivex
- * Copyright (C) 2009-2011 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- *)
-
-(* This script generates language bindings and some documentation for
- * hivex.
- *
- * After editing this file, run it (./generator/generator.ml) to
- * regenerate all the output files. 'make' will rerun this
- * automatically when necessary. Note that if you are using a separate
- * build directory you must run generator.ml from the _source_
- * directory.
- *
- * IMPORTANT: This script should NOT print any warnings. If it prints
- * warnings, you should treat them as errors.
- *
- * OCaml tips: (1) In emacs, install tuareg-mode to display and format
- * OCaml code correctly. 'vim' comes with a good OCaml editing mode by
- * default. (2) Read the resources at http://ocaml-tutorial.org/
- *)
-
-#load "unix.cma";;
-#load "str.cma";;
-
-open Unix
-open Printf
-
-type style = ret * args
-and ret =
- | RErr (* 0 = ok, -1 = error *)
- | RErrDispose (* Disposes handle, see hivex_close. *)
- | RHive (* Returns a hive_h or NULL. *)
- | RSize (* Returns size_t or 0. *)
- | RNode (* Returns hive_node_h or 0. *)
- | RNodeNotFound (* See hivex_node_get_child. *)
- | RNodeList (* Returns hive_node_h* or NULL. *)
- | RValue (* Returns hive_value_h or 0. *)
- | RValueList (* Returns hive_value_h* or NULL. *)
- | RLenValue (* Returns offset and length of value. *)
- | RString (* Returns char* or NULL. *)
- | RStringList (* Returns char** or NULL. *)
- | RLenType (* See hivex_value_type. *)
- | RLenTypeVal (* See hivex_value_value. *)
- | RInt32 (* Returns int32. *)
- | RInt64 (* Returns int64. *)
-
-and args = argt list (* List of parameters. *)
-
-and argt = (* Note, cannot be NULL/0 unless it
- says so explicitly below. *)
- | AHive (* hive_h* *)
- | ANode of string (* hive_node_h *)
- | AValue of string (* hive_value_h *)
- | AString of string (* char* *)
- | AStringNullable of string (* char* (can be NULL) *)
- | AOpenFlags (* HIVEX_OPEN_* flags list. *)
- | AUnusedFlags (* Flags arg that is always 0 *)
- | ASetValues (* See hivex_node_set_values. *)
- | ASetValue (* See hivex_node_set_value. *)
-
-(* Hive types, from:
- * https://secure.wikimedia.org/wikipedia/en/wiki/Windows_Registry#Keys_and_values
- *
- * It's unfortunate that in our original C binding we strayed away from
- * the names that Windows uses (eg. REG_SZ for strings). We include
- * both our names and the Windows names.
- *)
-let hive_types = [
- 0, "none", "NONE",
- "Just a key without a value";
- 1, "string", "SZ",
- "A Windows string (encoding is unknown, but often UTF16-LE)";
- 2, "expand_string", "EXPAND_SZ",
- "A Windows string that contains %env% (environment variable expansion)";
- 3, "binary", "BINARY",
- "A blob of binary";
- 4, "dword", "DWORD",
- "DWORD (32 bit integer), little endian";
- 5, "dword_be", "DWORD_BIG_ENDIAN",
- "DWORD (32 bit integer), big endian";
- 6, "link", "LINK",
- "Symbolic link to another part of the registry tree";
- 7, "multiple_strings", "MULTI_SZ",
- "Multiple Windows strings. See http://blogs.msdn.com/oldnewthing/archive/2009/10/08/9904646.aspx";
- 8, "resource_list", "RESOURCE_LIST",
- "Resource list";
- 9, "full_resource_description", "FULL_RESOURCE_DESCRIPTOR",
- "Resource descriptor";
- 10, "resource_requirements_list", "RESOURCE_REQUIREMENTS_LIST",
- "Resouce requirements list";
- 11, "qword", "QWORD",
- "QWORD (64 bit integer), unspecified endianness but usually little endian"
-]
-let max_hive_type = 11
-
-(* Open flags (bitmask passed to AOpenFlags) *)
-let open_flags = [
- 1, "VERBOSE", "Verbose messages";
- 2, "DEBUG", "Debug messages";
- 4, "WRITE", "Enable writes to the hive";
-]
-
-(* The API calls. *)
-let functions = [
- "open", (RHive, [AString "filename"; AOpenFlags]),
- "open a hive file",
- "\
-Opens the hive named C<filename> for reading.
-
-Flags is an ORed list of the open flags (or C<0> if you don't
-want to pass any flags). These flags are defined:
-
-=over 4
-
-=item HIVEX_OPEN_VERBOSE
-
-Verbose messages.
-
-=item HIVEX_OPEN_DEBUG
-
-Very verbose messages, suitable for debugging problems in the library
-itself.
-
-This is also selected if the C<HIVEX_DEBUG> environment variable
-is set to 1.
-
-=item HIVEX_OPEN_WRITE
-
-Open the hive for writing. If omitted, the hive is read-only.
-
-See L<hivex(3)/WRITING TO HIVE FILES>.
-
-=back";
-
- "close", (RErrDispose, [AHive]),
- "close a hive handle",
- "\
-Close a hive handle and free all associated resources.
-
-Note that any uncommitted writes are I<not> committed by this call,
-but instead are lost. See L<hivex(3)/WRITING TO HIVE FILES>.";
-
- "root", (RNode, [AHive]),
- "return the root node of the hive",
- "\
-Return root node of the hive. All valid hives must contain a root node.";
-
- "last_modified", (RInt64, [AHive]),
- "return the modification time from the header of the hive",
- "\
-Return the modification time from the header of the hive.
-
-The returned value is a Windows filetime.
-To convert this to a Unix C<time_t> see:
-L<http://stackoverflow.com/questions/6161776/convert-windows-filetime-to-second-in-unix-linux/6161842#6161842>";
-
- "node_name", (RString, [AHive; ANode "node"]),
- "return the name of the node",
- "\
-Return the name of the node.
-
-Note that the name of the root node is a dummy, such as
-C<$$$PROTO.HIV> (other names are possible: it seems to depend on the
-tool or program that created the hive in the first place). You can
-only know the \"real\" name of the root node by knowing which registry
-file this hive originally comes from, which is knowledge that is
-outside the scope of this library.";
-
- "node_timestamp", (RInt64, [AHive; ANode "node"]),
- "return the modification time of the node",
- "\
-Return the modification time of the node.
-
-The returned value is a Windows filetime.
-To convert this to a Unix C<time_t> see:
-L<http://stackoverflow.com/questions/6161776/convert-windows-filetime-to-second-in-unix-linux/6161842#6161842>";
-
- "node_children", (RNodeList, [AHive; ANode "node"]),
- "return children of node",
- "\
-Return an array of nodes which are the subkeys
-(children) of C<node>.";
-
- "node_get_child", (RNodeNotFound, [AHive; ANode "node"; AString "name"]),
- "return named child of node",
- "\
-Return the child of node with the name C<name>, if it exists.
-
-The name is matched case insensitively.";
-
- "node_parent", (RNode, [AHive; ANode "node"]),
- "return the parent of node",
- "\
-Return the parent of C<node>.
-
-The parent pointer of the root node in registry files that we
-have examined seems to be invalid, and so this function will
-return an error if called on the root node.";
-
- "node_values", (RValueList, [AHive; ANode "node"]),
- "return (key, value) pairs attached to a node",
- "\
-Return the array of (key, value) pairs attached to this node.";
-
- "node_get_value", (RValue, [AHive; ANode "node"; AString "key"]),
- "return named key at node",
- "\
-Return the value attached to this node which has the name C<key>,
-if it exists.
-
-The key name is matched case insensitively.
-
-Note that to get the default key, you should pass the empty
-string C<\"\"> here. The default key is often written C<\"@\">, but
-inside hives that has no meaning and won't give you the
-default key.";
-
- "value_key_len", (RSize, [AHive; AValue "val"]),
- "return the length of a value's key",
- "\
-Return the length of the key (name) of a (key, value) pair. The
-length can legitimately be 0, so errno is the necesary mechanism
-to check for errors.
-
-In the context of Windows Registries, a zero-length name means
-that this value is the default key for this node in the tree.
-This is usually written as C<\"@\">.";
-
- "value_key", (RString, [AHive; AValue "val"]),
- "return the key of a (key, value) pair",
- "\
-Return the key (name) of a (key, value) pair. The name
-is reencoded as UTF-8 and returned as a string.
-
-The string should be freed by the caller when it is no longer needed.
-
-Note that this function can return a zero-length string. In the
-context of Windows Registries, this means that this value is the
-default key for this node in the tree. This is usually written
-as C<\"@\">.";
-
- "value_type", (RLenType, [AHive; AValue "val"]),
- "return data length and data type of a value",
- "\
-Return the data length and data type of the value in this (key, value)
-pair. See also C<hivex_value_value> which returns all this
-information, and the value itself. Also, C<hivex_value_*> functions
-below which can be used to return the value in a more useful form when
-you know the type in advance.";
-
- "node_struct_length", (RSize, [AHive; ANode "node"]),
- "return the length of a node",
- "\
-Return the length of the node data structure.";
-
- "value_struct_length", (RSize, [AHive; AValue "val"]),
- "return the length of a value data structure",
- "\
-Return the length of the value data structure.";
-
- "value_data_cell_offset", (RLenValue, [AHive; AValue "val"]),
- "return the offset and length of a value data cell",
- "\
-Return the offset and length of the value's data cell.
-
-The data cell is a registry structure that contains the length
-(a 4 byte, little endian integer) followed by the data.
-
-If the length of the value is less than or equal to 4 bytes
-then the offset and length returned by this function is zero
-as the data is inlined in the value.
-
-Returns 0 and sets errno on error.";
-
- "value_value", (RLenTypeVal, [AHive; AValue "val"]),
- "return data length, data type and data of a value",
- "\
-Return the value of this (key, value) pair. The value should
-be interpreted according to its type (see C<hive_type>).";
-
- "value_string", (RString, [AHive; AValue "val"]),
- "return value as a string",
- "\
-If this value is a string, return the string reencoded as UTF-8
-(as a C string). This only works for values which have type
-C<hive_t_string>, C<hive_t_expand_string> or C<hive_t_link>.";
-
- "value_multiple_strings", (RStringList, [AHive; AValue "val"]),
- "return value as multiple strings",
- "\
-If this value is a multiple-string, return the strings reencoded
-as UTF-8 (in C, as a NULL-terminated array of C strings, in other
-language bindings, as a list of strings). This only
-works for values which have type C<hive_t_multiple_strings>.";
-
- "value_dword", (RInt32, [AHive; AValue "val"]),
- "return value as a DWORD",
- "\
-If this value is a DWORD (Windows int32), return it. This only works
-for values which have type C<hive_t_dword> or C<hive_t_dword_be>.";
-
- "value_qword", (RInt64, [AHive; AValue "val"]),
- "return value as a QWORD",
- "\
-If this value is a QWORD (Windows int64), return it. This only
-works for values which have type C<hive_t_qword>.";
-
- "commit", (RErr, [AHive; AStringNullable "filename"; AUnusedFlags]),
- "commit (write) changes to file",
- "\
-Commit (write) any changes which have been made.
-
-C<filename> is the new file to write. If C<filename> is null/undefined
-then we overwrite the original file (ie. the file name that was passed to
-C<hivex_open>).
-
-Note this does not close the hive handle. You can perform further
-operations on the hive after committing, including making more
-modifications. If you no longer wish to use the hive, then you
-should close the handle after committing.";
-
- "node_add_child", (RNode, [AHive; ANode "parent"; AString "name"]),
- "add child node",
- "\
-Add a new child node named C<name> to the existing node C<parent>.
-The new child initially has no subnodes and contains no keys or
-values. The sk-record (security descriptor) is inherited from
-the parent.
-
-The parent must not have an existing child called C<name>, so if you
-want to overwrite an existing child, call C<hivex_node_delete_child>
-first.";
-
- "node_delete_child", (RErr, [AHive; ANode "node"]),
- "delete child node",
- "\
-Delete the node C<node>. All values at the node and all subnodes are
-deleted (recursively). The C<node> handle and the handles of all
-subnodes become invalid. You cannot delete the root node.";
-
- "node_set_values", (RErr, [AHive; ANode "node"; ASetValues; AUnusedFlags]),
- "set (key, value) pairs at a node",
- "\
-This call can be used to set all the (key, value) pairs
-stored in C<node>.
-
-C<node> is the node to modify.";
-
- "node_set_value", (RErr, [AHive; ANode "node"; ASetValue; AUnusedFlags]),
- "set a single (key, value) pair at a given node",
- "\
-This call can be used to replace a single C<(key, value)> pair
-stored in C<node>. If the key does not already exist, then a
-new key is added. Key matching is case insensitive.
-
-C<node> is the node to modify.";
-]
-
-(* Useful functions.
- * Note we don't want to use any external OCaml libraries which
- * makes this a bit harder than it should be.
- *)
-module StringMap = Map.Make (String)
-
-let failwithf fs = ksprintf failwith fs
-
-let unique = let i = ref 0 in fun () -> incr i; !i
-
-let replace_char s c1 c2 =
- let s2 = String.copy s in
- let r = ref false in
- for i = 0 to String.length s2 - 1 do
- if String.unsafe_get s2 i = c1 then (
- String.unsafe_set s2 i c2;
- r := true
- )
- done;
- if not !r then s else s2
-
-let isspace c =
- c = ' '
- (* || c = '\f' *) || c = '\n' || c = '\r' || c = '\t' (* || c = '\v' *)
-
-let triml ?(test = isspace) str =
- let i = ref 0 in
- let n = ref (String.length str) in
- while !n > 0 && test str.[!i]; do
- decr n;
- incr i
- done;
- if !i = 0 then str
- else String.sub str !i !n
-
-let trimr ?(test = isspace) str =
- let n = ref (String.length str) in
- while !n > 0 && test str.[!n-1]; do
- decr n
- done;
- if !n = String.length str then str
- else String.sub str 0 !n
-
-let trim ?(test = isspace) str =
- trimr ~test (triml ~test str)
-
-(* Used to memoize the result of pod2text. *)
-let pod2text_memo_filename = "generator/.pod2text.data.version.2"
-let pod2text_memo : ((int option * bool * bool * string * string), string list) Hashtbl.t =
- try
- let chan = open_in pod2text_memo_filename in
- let v = input_value chan in
- close_in chan;
- v
- with
- _ -> Hashtbl.create 13
-let pod2text_memo_updated () =
- let chan = open_out pod2text_memo_filename in
- output_value chan pod2text_memo;
- close_out chan
-
-(* Useful if you need the longdesc POD text as plain text. Returns a
- * list of lines.
- *
- * Because this is very slow (the slowest part of autogeneration),
- * we memoize the results.
- *)
-let pod2text ?width ?(trim = true) ?(discard = true) name longdesc =
- let key = width, trim, discard, name, longdesc in
- try Hashtbl.find pod2text_memo key
- with Not_found ->
- let filename, chan = Filename.open_temp_file "gen" ".tmp" in
- fprintf chan "=head1 %s\n\n%s\n" name longdesc;
- close_out chan;
- let cmd =
- match width with
- | Some width ->
- sprintf "pod2text -w %d %s" width (Filename.quote filename)
- | None ->
- sprintf "pod2text %s" (Filename.quote filename) in
- let chan = open_process_in cmd in
- let lines = ref [] in
- let rec loop i =
- let line = input_line chan in
- if i = 1 && discard then (* discard the first line of output *)
- loop (i+1)
- else (
- let line = if trim then triml line else line in
- lines := line :: !lines;
- loop (i+1)
- ) in
- let lines = try loop 1 with End_of_file -> List.rev !lines in
- unlink filename;
- (match close_process_in chan with
- | WEXITED 0 -> ()
- | WEXITED i ->
- failwithf "pod2text: process exited with non-zero status (%d)" i
- | WSIGNALED i | WSTOPPED i ->
- failwithf "pod2text: process signalled or stopped by signal %d" i
- );
- Hashtbl.add pod2text_memo key lines;
- pod2text_memo_updated ();
- lines
-
-let rec find s sub =
- let len = String.length s in
- let sublen = String.length sub in
- let rec loop i =
- if i <= len-sublen then (
- let rec loop2 j =
- if j < sublen then (
- if s.[i+j] = sub.[j] then loop2 (j+1)
- else -1
- ) else
- i (* found *)
- in
- let r = loop2 0 in
- if r = -1 then loop (i+1) else r
- ) else
- -1 (* not found *)
- in
- loop 0
-
-let rec replace_str s s1 s2 =
- let len = String.length s in
- let sublen = String.length s1 in
- let i = find s s1 in
- if i = -1 then s
- else (
- let s' = String.sub s 0 i in
- let s'' = String.sub s (i+sublen) (len-i-sublen) in
- s' ^ s2 ^ replace_str s'' s1 s2
- )
-
-let rec string_split sep str =
- let len = String.length str in
- let seplen = String.length sep in
- let i = find str sep in
- if i = -1 then [str]
- else (
- let s' = String.sub str 0 i in
- let s'' = String.sub str (i+seplen) (len-i-seplen) in
- s' :: string_split sep s''
- )
-
-let files_equal n1 n2 =
- let cmd = sprintf "cmp -s %s %s" (Filename.quote n1) (Filename.quote n2) in
- match Sys.command cmd with
- | 0 -> true
- | 1 -> false
- | i -> failwithf "%s: failed with error code %d" cmd i
-
-let rec filter_map f = function
- | [] -> []
- | x :: xs ->
- match f x with
- | Some y -> y :: filter_map f xs
- | None -> filter_map f xs
-
-let rec find_map f = function
- | [] -> raise Not_found
- | x :: xs ->
- match f x with
- | Some y -> y
- | None -> find_map f xs
-
-let iteri f xs =
- let rec loop i = function
- | [] -> ()
- | x :: xs -> f i x; loop (i+1) xs
- in
- loop 0 xs
-
-let mapi f xs =
- let rec loop i = function
- | [] -> []
- | x :: xs -> let r = f i x in r :: loop (i+1) xs
- in
- loop 0 xs
-
-let count_chars c str =
- let count = ref 0 in
- for i = 0 to String.length str - 1 do
- if c = String.unsafe_get str i then incr count
- done;
- !count
-
-let name_of_argt = function
- | AHive -> "h"
- | ANode n | AValue n | AString n | AStringNullable n -> n
- | AOpenFlags | AUnusedFlags -> "flags"
- | ASetValues -> "values"
- | ASetValue -> "val"
-
-(* Check function names etc. for consistency. *)
-let check_functions () =
- let contains_uppercase str =
- let len = String.length str in
- let rec loop i =
- if i >= len then false
- else (
- let c = str.[i] in
- if c >= 'A' && c <= 'Z' then true
- else loop (i+1)
- )
- in
- loop 0
- in
-
- (* Check function names. *)
- List.iter (
- fun (name, _, _, _) ->
- if String.length name >= 7 && String.sub name 0 7 = "hivex" then
- failwithf "function name %s does not need 'hivex' prefix" name;
- if name = "" then
- failwithf "function name is empty";
- if name.[0] < 'a' || name.[0] > 'z' then
- failwithf "function name %s must start with lowercase a-z" name;
- if String.contains name '-' then
- failwithf "function name %s should not contain '-', use '_' instead."
- name
- ) functions;
-
- (* Check function parameter/return names. *)
- List.iter (
- fun (name, style, _, _) ->
- let check_arg_ret_name n =
- if contains_uppercase n then
- failwithf "%s param/ret %s should not contain uppercase chars"
- name n;
- if String.contains n '-' || String.contains n '_' then
- failwithf "%s param/ret %s should not contain '-' or '_'"
- name n;
- if n = "value" then
- failwithf "%s has a param/ret called 'value', which causes conflicts in the OCaml bindings, use something like 'val' or a more descriptive name" name;
- if n = "int" || n = "char" || n = "short" || n = "long" then
- failwithf "%s has a param/ret which conflicts with a C type (eg. 'int', 'char' etc.)" name;
- if n = "i" || n = "n" then
- failwithf "%s has a param/ret called 'i' or 'n', which will cause some conflicts in the generated code" name;
- if n = "argv" || n = "args" then
- failwithf "%s has a param/ret called 'argv' or 'args', which will cause some conflicts in the generated code" name;
-
- (* List Haskell, OCaml and C keywords here.
- * http://www.haskell.org/haskellwiki/Keywords
- * http://caml.inria.fr/pub/docs/manual-ocaml/lex.html#operator-char
- * http://en.wikipedia.org/wiki/C_syntax#Reserved_keywords
- * Formatted via: cat c haskell ocaml|sort -u|grep -vE '_|^val$' \
- * |perl -pe 's/(.+)/"$1";/'|fmt -70
- * Omitting _-containing words, since they're handled above.
- * Omitting the OCaml reserved word, "val", is ok,
- * and saves us from renaming several parameters.
- *)
- let reserved = [
- "and"; "as"; "asr"; "assert"; "auto"; "begin"; "break"; "case";
- "char"; "class"; "const"; "constraint"; "continue"; "data";
- "default"; "deriving"; "do"; "done"; "double"; "downto"; "else";
- "end"; "enum"; "exception"; "extern"; "external"; "false"; "float";
- "for"; "forall"; "foreign"; "fun"; "function"; "functor"; "goto";
- "hiding"; "if"; "import"; "in"; "include"; "infix"; "infixl";
- "infixr"; "inherit"; "initializer"; "inline"; "instance"; "int";
- "interface";
- "land"; "lazy"; "let"; "long"; "lor"; "lsl"; "lsr"; "lxor";
- "match"; "mdo"; "method"; "mod"; "module"; "mutable"; "new";
- "newtype"; "object"; "of"; "open"; "or"; "private"; "qualified";
- "rec"; "register"; "restrict"; "return"; "short"; "sig"; "signed";
- "sizeof"; "static"; "struct"; "switch"; "then"; "to"; "true"; "try";
- "type"; "typedef"; "union"; "unsigned"; "virtual"; "void";
- "volatile"; "when"; "where"; "while";
- ] in
- if List.mem n reserved then
- failwithf "%s has param/ret using reserved word %s" name n;
- in
-
- List.iter (fun arg -> check_arg_ret_name (name_of_argt arg)) (snd style)
- ) functions;
-
- (* Check short descriptions. *)
- List.iter (
- fun (name, _, shortdesc, _) ->
- if shortdesc.[0] <> Char.lowercase shortdesc.[0] then
- failwithf "short description of %s should begin with lowercase." name;
- let c = shortdesc.[String.length shortdesc-1] in
- if c = '\n' || c = '.' then
- failwithf "short description of %s should not end with . or \\n." name
- ) functions;
-
- (* Check long dscriptions. *)
- List.iter (
- fun (name, _, _, longdesc) ->
- if longdesc.[String.length longdesc-1] = '\n' then
- failwithf "long description of %s should not end with \\n." name
- ) functions
-
-(* 'pr' prints to the current output file. *)
-let chan = ref Pervasives.stdout
-let lines = ref 0
-let pr fs =
- ksprintf
- (fun str ->
- let i = count_chars '\n' str in
- lines := !lines + i;
- output_string !chan str
- ) fs
-
-let copyright_years =
- let this_year = 1900 + (localtime (time ())).tm_year in
- if this_year > 2009 then sprintf "2009-%04d" this_year else "2009"
-
-(* Generate a header block in a number of standard styles. *)
-type comment_style =
- | CStyle | CPlusPlusStyle | HashStyle | OCamlStyle | HaskellStyle
- | PODCommentStyle
-type license = GPLv2plus | LGPLv2plus | GPLv2 | LGPLv2
-
-let generate_header ?(extra_inputs = []) comment license =
- let inputs = "generator/generator.ml" :: extra_inputs in
- let c = match comment with
- | CStyle -> pr "/* "; " *"
- | CPlusPlusStyle -> pr "// "; "//"
- | HashStyle -> pr "# "; "#"
- | OCamlStyle -> pr "(* "; " *"
- | HaskellStyle -> pr "{- "; " "
- | PODCommentStyle -> pr "=begin comment\n\n "; "" in
- pr "hivex generated file\n";
- pr "%s WARNING: THIS FILE IS GENERATED FROM:\n" c;
- List.iter (pr "%s %s\n" c) inputs;
- pr "%s ANY CHANGES YOU MAKE TO THIS FILE WILL BE LOST.\n" c;
- pr "%s\n" c;
- pr "%s Copyright (C) %s Red Hat Inc.\n" c copyright_years;
- pr "%s Derived from code by Petter Nordahl-Hagen under a compatible license:\n" c;
- pr "%s Copyright (c) 1997-2007 Petter Nordahl-Hagen.\n" c;
- pr "%s Derived from code by Markus Stephany under a compatible license:\n" c;
- pr "%s Copyright (c)2000-2004, Markus Stephany.\n" c;
- pr "%s\n" c;
- (match license with
- | GPLv2plus ->
- pr "%s This program is free software; you can redistribute it and/or modify\n" c;
- pr "%s it under the terms of the GNU General Public License as published by\n" c;
- pr "%s the Free Software Foundation; either version 2 of the License, or\n" c;
- pr "%s (at your option) any later version.\n" c;
- pr "%s\n" c;
- pr "%s This program is distributed in the hope that it will be useful,\n" c;
- pr "%s but WITHOUT ANY WARRANTY; without even the implied warranty of\n" c;
- pr "%s MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" c;
- pr "%s GNU General Public License for more details.\n" c;
- pr "%s\n" c;
- pr "%s You should have received a copy of the GNU General Public License along\n" c;
- pr "%s with this program; if not, write to the Free Software Foundation, Inc.,\n" c;
- pr "%s 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.\n" c;
-
- | LGPLv2plus ->
- pr "%s This library is free software; you can redistribute it and/or\n" c;
- pr "%s modify it under the terms of the GNU Lesser General Public\n" c;
- pr "%s License as published by the Free Software Foundation; either\n" c;
- pr "%s version 2 of the License, or (at your option) any later version.\n" c;
- pr "%s\n" c;
- pr "%s This library is distributed in the hope that it will be useful,\n" c;
- pr "%s but WITHOUT ANY WARRANTY; without even the implied warranty of\n" c;
- pr "%s MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU\n" c;
- pr "%s Lesser General Public License for more details.\n" c;
- pr "%s\n" c;
- pr "%s You should have received a copy of the GNU Lesser General Public\n" c;
- pr "%s License along with this library; if not, write to the Free Software\n" c;
- pr "%s Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA\n" c;
-
- | GPLv2 ->
- pr "%s This program is free software; you can redistribute it and/or modify\n" c;
- pr "%s it under the terms of the GNU General Public License as published by\n" c;
- pr "%s the Free Software Foundation; version 2 of the License only.\n" c;
- pr "%s\n" c;
- pr "%s This program is distributed in the hope that it will be useful,\n" c;
- pr "%s but WITHOUT ANY WARRANTY; without even the implied warranty of\n" c;
- pr "%s MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" c;
- pr "%s GNU General Public License for more details.\n" c;
- pr "%s\n" c;
- pr "%s You should have received a copy of the GNU General Public License along\n" c;
- pr "%s with this program; if not, write to the Free Software Foundation, Inc.,\n" c;
- pr "%s 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.\n" c;
-
- | LGPLv2 ->
- pr "%s This library is free software; you can redistribute it and/or\n" c;
- pr "%s modify it under the terms of the GNU Lesser General Public\n" c;
- pr "%s License as published by the Free Software Foundation;\n" c;
- pr "%s version 2.1 of the License only.\n" c;
- pr "%s\n" c;
- pr "%s This library is distributed in the hope that it will be useful,\n" c;
- pr "%s but WITHOUT ANY WARRANTY; without even the implied warranty of\n" c;
- pr "%s MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU\n" c;
- pr "%s Lesser General Public License for more details.\n" c;
- pr "%s\n" c;
- pr "%s You should have received a copy of the GNU Lesser General Public\n" c;
- pr "%s License along with this library; if not, write to the Free Software\n" c;
- pr "%s Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA\n" c;
- );
- (match comment with
- | CStyle -> pr " */\n"
- | CPlusPlusStyle
- | HashStyle -> ()
- | OCamlStyle -> pr " *)\n"
- | HaskellStyle -> pr "-}\n"
- | PODCommentStyle -> pr "\n=end comment\n"
- );
- pr "\n"
-
-(* Start of main code generation functions below this line. *)
-
-let rec generate_c_header () =
- generate_header CStyle LGPLv2;
-
- pr "\
-#ifndef HIVEX_H_
-#define HIVEX_H_
-
-#include <stdlib.h>
-#include <stdint.h>
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* NOTE: This API is documented in the man page hivex(3). */
-
-/* Hive handle. */
-typedef struct hive_h hive_h;
-
-/* Nodes and values. */
-typedef size_t hive_node_h;
-typedef size_t hive_value_h;
-
-#include <errno.h>
-#ifdef ENOKEY
-# define HIVEX_NO_KEY ENOKEY
-#else
-# define HIVEX_NO_KEY ENOENT
-#endif
-
-/* Pre-defined types. */
-enum hive_type {
-";
- List.iter (
- fun (t, old_style, new_style, description) ->
- pr " /* %s */\n" description;
- pr " hive_t_REG_%s,\n" new_style;
- pr "#define hive_t_%s hive_t_REG_%s\n" old_style new_style;
- pr "\n"
- ) hive_types;
- pr "\
-};
-
-typedef enum hive_type hive_type;
-
-/* Bitmask of flags passed to hivex_open. */
-";
- List.iter (
- fun (v, flag, description) ->
- pr " /* %s */\n" description;
- pr "#define HIVEX_OPEN_%-10s %d\n" flag v;
- ) open_flags;
- pr "\n";
-
- pr "\
-/* Array of (key, value) pairs passed to hivex_node_set_values. */
-struct hive_set_value {
- char *key;
- hive_type t;
- size_t len;
- char *value;
-};
-typedef struct hive_set_value hive_set_value;
-
-";
-
- pr "/* Functions. */\n";
-
- (* Function declarations. *)
- List.iter (
- fun (shortname, style, _, _) ->
- let name = "hivex_" ^ shortname in
- generate_c_prototype ~extern:true name style
- ) functions;
-
- (* The visitor pattern. *)
- pr "
-/* Visit all nodes. This is specific to the C API and is not made
- * available to other languages. This is because of the complexity
- * of binding callbacks in other languages, but also because other
- * languages make it much simpler to iterate over a tree.
- */
-struct hivex_visitor {
- int (*node_start) (hive_h *, void *opaque, hive_node_h, const char *name);
- int (*node_end) (hive_h *, void *opaque, hive_node_h, const char *name);
- int (*value_string) (hive_h *, void *opaque, hive_node_h, hive_value_h, hive_type t, size_t len, const char *key, const char *str);
- int (*value_multiple_strings) (hive_h *, void *opaque, hive_node_h, hive_value_h, hive_type t, size_t len, const char *key, char **argv);
- int (*value_string_invalid_utf16) (hive_h *, void *opaque, hive_node_h, hive_value_h, hive_type t, size_t len, const char *key, const char *str);
- int (*value_dword) (hive_h *, void *opaque, hive_node_h, hive_value_h, hive_type t, size_t len, const char *key, int32_t);
- int (*value_qword) (hive_h *, void *opaque, hive_node_h, hive_value_h, hive_type t, size_t len, const char *key, int64_t);
- int (*value_binary) (hive_h *, void *opaque, hive_node_h, hive_value_h, hive_type t, size_t len, const char *key, const char *value);
- int (*value_none) (hive_h *, void *opaque, hive_node_h, hive_value_h, hive_type t, size_t len, const char *key, const char *value);
- int (*value_other) (hive_h *, void *opaque, hive_node_h, hive_value_h, hive_type t, size_t len, const char *key, const char *value);
- int (*value_any) (hive_h *, void *opaque, hive_node_h, hive_value_h, hive_type t, size_t len, const char *key, const char *value);
-};
-
-#define HIVEX_VISIT_SKIP_BAD 1
-
-extern int hivex_visit (hive_h *h, const struct hivex_visitor *visitor, size_t len, void *opaque, int flags);
-extern int hivex_visit_node (hive_h *h, hive_node_h node, const struct hivex_visitor *visitor, size_t len, void *opaque, int flags);
-
-";
-
- (* Finish the header file. *)
- pr "\
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HIVEX_H_ */
-"
-
-and generate_c_prototype ?(extern = false) name style =
- if extern then pr "extern ";
- (match fst style with
- | RErr -> pr "int "
- | RErrDispose -> pr "int "
- | RHive -> pr "hive_h *"
- | RSize -> pr "size_t "
- | RNode -> pr "hive_node_h "
- | RNodeNotFound -> pr "hive_node_h "
- | RNodeList -> pr "hive_node_h *"
- | RValue -> pr "hive_value_h "
- | RValueList -> pr "hive_value_h *"
- | RString -> pr "char *"
- | RStringList -> pr "char **"
- | RLenValue -> pr "hive_value_h "
- | RLenType -> pr "int "
- | RLenTypeVal -> pr "char *"
- | RInt32 -> pr "int32_t "
- | RInt64 -> pr "int64_t "
- );
- pr "%s (" name;
- let comma = ref false in
- List.iter (
- fun arg ->
- if !comma then pr ", "; comma := true;
- match arg with
- | AHive -> pr "hive_h *h"
- | ANode n -> pr "hive_node_h %s" n
- | AValue n -> pr "hive_value_h %s" n
- | AString n | AStringNullable n -> pr "const char *%s" n
- | AOpenFlags | AUnusedFlags -> pr "int flags"
- | ASetValues -> pr "size_t nr_values, const hive_set_value *values"
- | ASetValue -> pr "const hive_set_value *val"
- ) (snd style);
- (match fst style with
- | RLenType | RLenTypeVal -> pr ", hive_type *t, size_t *len"
- | RLenValue -> pr ", size_t *len"
- | _ -> ()
- );
- pr ");\n"
-
-and generate_c_pod () =
- generate_header PODCommentStyle GPLv2;
-
- pr "\
- =encoding utf8
-
-=head1 NAME
-
-hivex - Windows Registry \"hive\" extraction library
-
-=head1 SYNOPSIS
-
- #include <hivex.h>
-
-";
- List.iter (
- fun (shortname, style, _, _) ->
- let name = "hivex_" ^ shortname in
- pr " ";
- generate_c_prototype ~extern:false name style;
- ) functions;
-
- pr "\
-
-Link with I<-lhivex>.
-
-=head1 DESCRIPTION
-
-Hivex is a library for extracting the contents of Windows Registry
-\"hive\" files. It is designed to be secure against buggy or malicious
-registry files.
-
-Unlike other tools in this area, it doesn't use the textual .REG
-format, because parsing that is as much trouble as parsing the
-original binary format. Instead it makes the file available
-through a C API, and then wraps this API in higher level scripting
-and GUI tools.
-
-There is a separate program to export the hive as XML
-(see L<hivexml(1)>), or to navigate the file (see L<hivexsh(1)>).
-There is also a Perl script to export and merge the
-file as a textual .REG (regedit) file, see L<hivexregedit(1)>.
-
-If you just want to export or modify the Registry of a Windows
-virtual machine, you should look at L<virt-win-reg(1)>.
-
-Hivex is also comes with language bindings for
-OCaml, Perl, Python and Ruby.
-
-=head1 TYPES
-
-=head2 C<hive_h *>
-
-This handle describes an open hive file.
-
-=head2 C<hive_node_h>
-
-This is a node handle, an integer but opaque outside the library.
-Valid node handles cannot be 0. The library returns 0 in some
-situations to indicate an error.
-
-=head2 C<hive_type>
-
-The enum below describes the possible types for the value(s)
-stored at each node. Note that you should not trust the
-type field in a Windows Registry, as it very often has no
-relationship to reality. Some applications use their own
-types. The encoding of strings is not specified. Some
-programs store everything (including strings) in binary blobs.
-
- enum hive_type {
-";
- List.iter (
- fun (t, _, new_style, description) ->
- pr " /* %s */\n" description;
- pr " hive_t_REG_%s = %d,\n" new_style t
- ) hive_types;
- pr "\
- };
-
-=head2 C<hive_value_h>
-
-This is a value handle, an integer but opaque outside the library.
-Valid value handles cannot be 0. The library returns 0 in some
-situations to indicate an error.
-
-=head2 C<hive_set_value>
-
-The typedef C<hive_set_value> is used in conjunction with the
-C<hivex_node_set_values> call described below.
-
- struct hive_set_value {
- char *key; /* key - a UTF-8 encoded ASCIIZ string */
- hive_type t; /* type of value field */
- size_t len; /* length of value field in bytes */
- char *value; /* value field */
- };
- typedef struct hive_set_value hive_set_value;
-
-To set the default value for a node, you have to pass C<key = \"\">.
-
-Note that the C<value> field is just treated as a list of bytes, and
-is stored directly in the hive. The caller has to ensure correct
-encoding and endianness, for example converting dwords to little
-endian.
-
-The correct type and encoding for values depends on the node and key
-in the registry, the version of Windows, and sometimes even changes
-between versions of Windows for the same key. We don't document it
-here. Often it's not documented at all.
-
-=head1 FUNCTIONS
-
-";
- List.iter (
- fun (shortname, style, _, longdesc) ->
- let name = "hivex_" ^ shortname in
- pr "=head2 %s\n" name;
- pr "\n ";
- generate_c_prototype ~extern:false name style;
- pr "\n";
- pr "%s\n" longdesc;
- pr "\n";
-
- if List.mem AUnusedFlags (snd style) then
- pr "The flags parameter is unused. Always pass 0.\n\n";
-
- if List.mem ASetValues (snd style) then
- pr "C<values> is an array of (key, value) pairs. There
-should be C<nr_values> elements in this array.
-
-Any existing values stored at the node are discarded, and their
-C<hive_value_h> handles become invalid. Thus you can remove all
-values stored at C<node> by passing C<nr_values = 0>.\n\n";
-
- if List.mem ASetValue (snd style) then
- pr "C<value> is a single (key, value) pair.
-
-Existing C<hive_value_h> handles become invalid.\n\n";
-
- (match fst style with
- | RErr ->
- pr "\
-Returns 0 on success.
-On error this returns -1 and sets errno.\n\n"
- | RErrDispose ->
- pr "\
-Returns 0 on success.
-On error this returns -1 and sets errno.
-
-This function frees the hive handle (even if it returns an error).
-The hive handle must not be used again after calling this function.\n\n"
- | RHive ->
- pr "\
-Returns a new hive handle.
-On error this returns NULL and sets errno.\n\n"
- | RSize ->
- pr "\
-Returns a size.
-On error this returns 0 and sets errno.\n\n"
- | RNode ->
- pr "\
-Returns a node handle.
-On error this returns 0 and sets errno.\n\n"
- | RNodeNotFound ->
- pr "\
-Returns a node handle.
-If the node was not found, this returns 0 without setting errno.
-On error this returns 0 and sets errno.\n\n"
- | RNodeList ->
- pr "\
-Returns a 0-terminated array of nodes.
-The array must be freed by the caller when it is no longer needed.
-On error this returns NULL and sets errno.\n\n"
- | RValue ->
- pr "\
-Returns a value handle.
-On error this returns 0 and sets errno.\n\n"
- | RValueList ->
- pr "\
-Returns a 0-terminated array of values.
-The array must be freed by the caller when it is no longer needed.
-On error this returns NULL and sets errno.\n\n"
- | RString ->
- pr "\
-Returns a string.
-The string must be freed by the caller when it is no longer needed.
-On error this returns NULL and sets errno.\n\n"
- | RStringList ->
- pr "\
-Returns a NULL-terminated array of C strings.
-The strings and the array must all be freed by the caller when
-they are no longer needed.
-On error this returns NULL and sets errno.\n\n"
- | RLenType ->
- pr "\
-Returns 0 on success.
-On error this returns -1 and sets errno.\n\n"
- | RLenValue ->
- pr "\
-Returns a value handle.
-On error this returns 0 and sets errno.\n\n"
- | RLenTypeVal ->
- pr "\
-The value is returned as an array of bytes (of length C<len>).
-The value must be freed by the caller when it is no longer needed.
-On error this returns NULL and sets errno.\n\n"
- | RInt32 | RInt64 -> ()
- );
- ) functions;
-
- pr "\
-=head1 WRITING TO HIVE FILES
-
-The hivex library supports making limited modifications to hive files.
-We have tried to implement this very conservatively in order to reduce
-the chance of corrupting your registry. However you should be careful
-and take back-ups, since Microsoft has never documented the hive
-format, and so it is possible there are nuances in the
-reverse-engineered format that we do not understand.
-
-To be able to modify a hive, you must pass the C<HIVEX_OPEN_WRITE>
-flag to C<hivex_open>, otherwise any write operation will return with
-errno C<EROFS>.
-
-The write operations shown below do not modify the on-disk file
-immediately. You must call C<hivex_commit> in order to write the
-changes to disk. If you call C<hivex_close> without committing then
-any writes are discarded.
-
-Hive files internally consist of a \"memory dump\" of binary blocks
-(like the C heap), and some of these blocks can be unused. The hivex
-library never reuses these unused blocks. Instead, to ensure
-robustness in the face of the partially understood on-disk format,
-hivex only allocates new blocks after the end of the file, and makes
-minimal modifications to existing structures in the file to point to
-these new blocks. This makes hivex slightly less disk-efficient than
-it could be, but disk is cheap, and registry modifications tend to be
-very small.
-
-When deleting nodes, it is possible that this library may leave
-unreachable live blocks in the hive. This is because certain parts of
-the hive disk format such as security (sk) records and big data (db)
-records and classname fields are not well understood (and not
-documented at all) and we play it safe by not attempting to modify
-them. Apart from wasting a little bit of disk space, it is not
-thought that unreachable blocks are a problem.
-
-=head2 WRITE OPERATIONS WHICH ARE NOT SUPPORTED
-
-=over 4
-
-=item *
-
-Changing the root node.
-
-=item *
-
-Creating a new hive file from scratch. This is impossible at present
-because not all fields in the header are understood. In the hivex
-source tree is a file called C<images/minimal> which could be used as
-the basis for a new hive (but I<caveat emptor>).
-
-=item *
-
-Modifying or deleting single values at a node.
-
-=item *
-
-Modifying security key (sk) records or classnames.
-Previously we did not understand these records. However now they
-are well-understood and we could add support if it was required
-(but nothing much really uses them).
-
-=back
-
-=head1 VISITING ALL NODES
-
-The visitor pattern is useful if you want to visit all nodes
-in the tree or all nodes below a certain point in the tree.
-
-First you set up your own C<struct hivex_visitor> with your
-callback functions.
-
-Each of these callback functions should return 0 on success or -1
-on error. If any callback returns -1, then the entire visit
-terminates immediately. If you don't need a callback function at
-all, set the function pointer to NULL.
-
- struct hivex_visitor {
- int (*node_start) (hive_h *, void *opaque, hive_node_h, const char *name);
- int (*node_end) (hive_h *, void *opaque, hive_node_h, const char *name);
- int (*value_string) (hive_h *, void *opaque, hive_node_h, hive_value_h,
- hive_type t, size_t len, const char *key, const char *str);
- int (*value_multiple_strings) (hive_h *, void *opaque, hive_node_h,
- hive_value_h, hive_type t, size_t len, const char *key, char **argv);
- int (*value_string_invalid_utf16) (hive_h *, void *opaque, hive_node_h,
- hive_value_h, hive_type t, size_t len, const char *key,
- const char *str);
- int (*value_dword) (hive_h *, void *opaque, hive_node_h, hive_value_h,
- hive_type t, size_t len, const char *key, int32_t);
- int (*value_qword) (hive_h *, void *opaque, hive_node_h, hive_value_h,
- hive_type t, size_t len, const char *key, int64_t);
- int (*value_binary) (hive_h *, void *opaque, hive_node_h, hive_value_h,
- hive_type t, size_t len, const char *key, const char *value);
- int (*value_none) (hive_h *, void *opaque, hive_node_h, hive_value_h,
- hive_type t, size_t len, const char *key, const char *value);
- int (*value_other) (hive_h *, void *opaque, hive_node_h, hive_value_h,
- hive_type t, size_t len, const char *key, const char *value);
- /* If value_any callback is not NULL, then the other value_*
- * callbacks are not used, and value_any is called on all values.
- */
- int (*value_any) (hive_h *, void *opaque, hive_node_h, hive_value_h,
- hive_type t, size_t len, const char *key, const char *value);
- };
-
-=over 4
-
-=item hivex_visit
-
- int hivex_visit (hive_h *h, const struct hivex_visitor *visitor, size_t len, void *opaque, int flags);
-
-Visit all the nodes recursively in the hive C<h>.
-
-C<visitor> should be a C<hivex_visitor> structure with callback
-fields filled in as required (unwanted callbacks can be set to
-NULL). C<len> must be the length of the 'visitor' struct (you
-should pass C<sizeof (struct hivex_visitor)> for this).
-
-This returns 0 if the whole recursive visit was completed
-successfully. On error this returns -1. If one of the callback
-functions returned an error than we don't touch errno. If the
-error was generated internally then we set errno.
-
-You can skip bad registry entries by setting C<flag> to
-C<HIVEX_VISIT_SKIP_BAD>. If this flag is not set, then a bad registry
-causes the function to return an error immediately.
-
-This function is robust if the registry contains cycles or
-pointers which are invalid or outside the registry. It detects
-these cases and returns an error.
-
-=item hivex_visit_node
-
- int hivex_visit_node (hive_h *h, hive_node_h node, const struct hivex_visitor *visitor, size_t len, void *opaque);
-
-Same as C<hivex_visit> but instead of starting out at the root, this
-starts at C<node>.
-
-=back
-
-=head1 THE STRUCTURE OF THE WINDOWS REGISTRY
-
-Note: To understand the relationship between hives and the common
-Windows Registry keys (like C<HKEY_LOCAL_MACHINE>) please see the
-Wikipedia page on the Windows Registry.
-
-The Windows Registry is split across various binary files, each
-file being known as a \"hive\". This library only handles a single
-hive file at a time.
-
-Hives are n-ary trees with a single root. Each node in the tree
-has a name.
-
-Each node in the tree (including non-leaf nodes) may have an
-arbitrary list of (key, value) pairs attached to it. It may
-be the case that one of these pairs has an empty key. This
-is referred to as the default key for the node.
-
-The (key, value) pairs are the place where the useful data is
-stored in the registry. The key is always a string (possibly the
-empty string for the default key). The value is a typed object
-(eg. string, int32, binary, etc.).
-
-=head2 RELATIONSHIP TO .REG FILES
-
-The hivex C library does not care about or deal with Windows .REG
-files. Instead we push this complexity up to the Perl
-L<Win::Hivex(3)> library and the Perl programs
-L<hivexregedit(1)> and L<virt-win-reg(1)>.
-Nevertheless it is useful to look at the relationship between the
-Registry and .REG files because they are so common.
-
-A .REG file is a textual representation of the registry, or part of the
-registry. The actual registry hives that Windows uses are binary
-files. There are a number of Windows and Linux tools that let you
-generate .REG files, or merge .REG files back into the registry hives.
-Notable amongst them is Microsoft's REGEDIT program (formerly known as
-REGEDT32).
-
-A typical .REG file will contain many sections looking like this:
-
- [HKEY_LOCAL_MACHINE\\SOFTWARE\\Classes\\Stack]
- \"@\"=\"Generic Stack\"
- \"TileInfo\"=\"prop:System.FileCount\"
- \"TilePath\"=str(2):\"%%systemroot%%\\\\system32\"
- \"ThumbnailCutoff\"=dword:00000000
- \"FriendlyTypeName\"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,\\
- 6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,\\
- 33,00,32,00,5c,00,73,00,65,00,61,00,72,00,63,00,68,00,66,00,\\
- 6f,00,6c,00,64,00,65,00,72,00,2e,00,64,00,6c,00,6c,00,2c,00,\\
- 2d,00,39,00,30,00,32,00,38,00,00,00,d8
-
-Taking this one piece at a time:
-
- [HKEY_LOCAL_MACHINE\\SOFTWARE\\Classes\\Stack]
-
-This is the path to this node in the registry tree. The first part,
-C<HKEY_LOCAL_MACHINE\\SOFTWARE> means that this comes from a hive
-file called C<C:\\WINDOWS\\SYSTEM32\\CONFIG\\SOFTWARE>.
-C<\\Classes\\Stack> is the real path part,
-starting at the root node of the C<SOFTWARE> hive.
-
-Below the node name is a list of zero or more key-value pairs. Any
-interior or leaf node in the registry may have key-value pairs
-attached.
-
- \"@\"=\"Generic Stack\"
-
-This is the \"default key\". In reality (ie. inside the binary hive)
-the key string is the empty string. In .REG files this is written as
-C<@> but this has no meaning either in the hives themselves or in this
-library. The value is a string (type 1 - see C<enum hive_type>
-above).
-
- \"TileInfo\"=\"prop:System.FileCount\"
-
-This is a regular (key, value) pair, with the value being a type 1
-string. Note that inside the binary file the string is likely to be
-UTF-16LE encoded. This library converts to and from UTF-8 strings
-transparently in some cases.
-
- \"TilePath\"=str(2):\"%%systemroot%%\\\\system32\"
-
-The value in this case has type 2 (expanded string) meaning that some
-%%...%% variables get expanded by Windows. (This library doesn't know
-or care about variable expansion).
-
- \"ThumbnailCutoff\"=dword:00000000
-
-The value in this case is a dword (type 4).
-
- \"FriendlyTypeName\"=hex(2):40,00,....
-
-This value is an expanded string (type 2) represented in the .REG file
-as a series of hex bytes. In this case the string appears to be a
-UTF-16LE string.
-
-=head1 NOTE ON THE USE OF ERRNO
-
-Many functions in this library set errno to indicate errors. These
-are the values of errno you may encounter (this list is not
-exhaustive):
-
-=over 4
-
-=item ENOTSUP
-
-Corrupt or unsupported Registry file format.
-
-=item HIVEX_NO_KEY
-
-Missing root key.
-
-=item EINVAL
-
-Passed an invalid argument to the function.
-
-=item EFAULT
-
-Followed a Registry pointer which goes outside
-the registry or outside a registry block.
-
-=item ELOOP
-
-Registry contains cycles.
-
-=item ERANGE
-
-Field in the registry out of range.
-
-=item EEXIST
-
-Registry key already exists.
-
-=item EROFS
-
-Tried to write to a registry which is not opened for writing.
-
-=back
-
-=head1 ENVIRONMENT VARIABLES
-
-=over 4
-
-=item HIVEX_DEBUG
-
-Setting HIVEX_DEBUG=1 will enable very verbose messages. This is
-useful for debugging problems with the library itself.
-
-=back
-
-=head1 SEE ALSO
-
-L<hivexget(1)>,
-L<hivexml(1)>,
-L<hivexsh(1)>,
-L<hivexregedit(1)>,
-L<virt-win-reg(1)>,
-L<Win::Hivex(3)>,
-L<guestfs(3)>,
-L<http://libguestfs.org/>,
-L<virt-cat(1)>,
-L<virt-edit(1)>,
-L<http://en.wikipedia.org/wiki/Windows_Registry>.
-
-=head1 AUTHORS
-
-Richard W.M. Jones (C<rjones at redhat dot com>)
-
-=head1 COPYRIGHT
-
-Copyright (C) 2009-2010 Red Hat Inc.
-
-Derived from code by Petter Nordahl-Hagen under a compatible license:
-Copyright (C) 1997-2007 Petter Nordahl-Hagen.
-
-Derived from code by Markus Stephany under a compatible license:
-Copyright (C) 2000-2004 Markus Stephany.
-
-This library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Lesser General Public
-License as published by the Free Software Foundation;
-version 2.1 of the License only.
-
-This library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-Lesser General Public License for more details.
-"
-
-(* Generate the linker script which controls the visibility of
- * symbols in the public ABI and ensures no other symbols get
- * exported accidentally.
- *)
-and generate_linker_script () =
- generate_header HashStyle GPLv2plus;
-
- let globals = [
- "hivex_visit";
- "hivex_visit_node"
- ] in
-
- let functions =
- List.map (fun (name, _, _, _) -> "hivex_" ^ name)
- functions in
- let globals = List.sort compare (globals @ functions) in
-
- pr "{\n";
- pr " global:\n";
- List.iter (pr " %s;\n") globals;
- pr "\n";
-
- pr " local:\n";
- pr " *;\n";
- pr "};\n"
-
-and generate_ocaml_interface () =
- generate_header OCamlStyle LGPLv2plus;
-
- pr "\
-type t
-(** A [hive_h] hive file handle. *)
-
-type node
-type value
-(** Nodes and values. *)
-
-exception Error of string * Unix.error * string
-(** Error raised by a function.
-
- The first parameter is the name of the function which raised the error.
- The second parameter is the errno (see the [Unix] module). The third
- parameter is a human-readable string corresponding to the errno.
-
- See hivex(3) for a partial list of interesting errno values that
- can be generated by the library. *)
-exception Handle_closed of string
-(** This exception is raised if you call a function on a closed handle. *)
-
-type hive_type =
-";
- iteri (
- fun i ->
- fun (t, _, new_style, description) ->
- assert (i = t);
- pr " | REG_%s (** %s *)\n" new_style description
- ) hive_types;
-
- pr "\
- | REG_UNKNOWN of int32 (** unknown type *)
-(** Hive type field. *)
-
-type open_flag =
-";
- iteri (
- fun i ->
- fun (v, flag, description) ->
- assert (1 lsl i = v);
- pr " | OPEN_%s (** %s *)\n" flag description
- ) open_flags;
-
- pr "\
-(** Open flags for {!open_file} call. *)
-
-type set_value = {
- key : string;
- t : hive_type;
- value : string;
-}
-(** (key, value) pair passed (as an array) to {!node_set_values}. *)
-";
-
- List.iter (
- fun (name, style, shortdesc, _) ->
- pr "\n";
- generate_ocaml_prototype name style;
- pr "(** %s *)\n" shortdesc
- ) functions
-
-and generate_ocaml_implementation () =
- generate_header OCamlStyle LGPLv2plus;
-
- pr "\
-type t
-type node = int
-type value = int
-
-exception Error of string * Unix.error * string
-exception Handle_closed of string
-
-(* Give the exceptions names, so they can be raised from the C code. *)
-let () =
- Callback.register_exception \"ocaml_hivex_error\"
- (Error (\"\", Unix.EUNKNOWNERR 0, \"\"));
- Callback.register_exception \"ocaml_hivex_closed\" (Handle_closed \"\")
-
-type hive_type =
-";
- iteri (
- fun i ->
- fun (t, _, new_style, _) ->
- assert (i = t);
- pr " | REG_%s\n" new_style
- ) hive_types;
-
- pr "\
- | REG_UNKNOWN of int32
-
-type open_flag =
-";
- iteri (
- fun i ->
- fun (v, flag, description) ->
- assert (1 lsl i = v);
- pr " | OPEN_%s (** %s *)\n" flag description
- ) open_flags;
-
- pr "\
-
-type set_value = {
- key : string;
- t : hive_type;
- value : string;
-}
-
-";
-
- List.iter (
- fun (name, style, _, _) ->
- generate_ocaml_prototype ~is_external:true name style
- ) functions
-
-and generate_ocaml_prototype ?(is_external = false) name style =
- let ocaml_name = if name = "open" then "open_file" else name in
-
- if is_external then pr "external " else pr "val ";
- pr "%s : " ocaml_name;
- List.iter (
- function
- | AHive -> pr "t -> "
- | ANode _ -> pr "node -> "
- | AValue _ -> pr "value -> "
- | AString _ -> pr "string -> "
- | AStringNullable _ -> pr "string option -> "
- | AOpenFlags -> pr "open_flag list -> "
- | AUnusedFlags -> ()
- | ASetValues -> pr "set_value array -> "
- | ASetValue -> pr "set_value -> "
- ) (snd style);
- (match fst style with
- | RErr -> pr "unit" (* all errors are turned into exceptions *)
- | RErrDispose -> pr "unit"
- | RHive -> pr "t"
- | RSize -> pr "int64"
- | RNode -> pr "node"
- | RNodeNotFound -> pr "node"
- | RNodeList -> pr "node array"
- | RValue -> pr "value"
- | RValueList -> pr "value array"
- | RString -> pr "string"
- | RStringList -> pr "string array"
- | RLenType -> pr "hive_type * int"
- | RLenValue -> pr "int * value"
- | RLenTypeVal -> pr "hive_type * string"
- | RInt32 -> pr "int32"
- | RInt64 -> pr "int64"
- );
- if is_external then
- pr " = \"ocaml_hivex_%s\"" name;
- pr "\n"
-
-and generate_ocaml_c () =
- generate_header CStyle LGPLv2plus;
-
- pr "\
-#include <config.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdint.h>
-#include <errno.h>
-
-#include <caml/config.h>
-#include <caml/alloc.h>
-#include <caml/callback.h>
-#include <caml/custom.h>
-#include <caml/fail.h>
-#include <caml/memory.h>
-#include <caml/mlvalues.h>
-#include <caml/signals.h>
-
-#ifdef HAVE_CAML_UNIXSUPPORT_H
-#include <caml/unixsupport.h>
-#else
-extern value unix_error_of_code (int errcode);
-#endif
-
-#ifndef HAVE_CAML_RAISE_WITH_ARGS
-static void
-caml_raise_with_args (value tag, int nargs, value args[])
-{
- CAMLparam1 (tag);
- CAMLxparamN (args, nargs);
- value bucket;
- int i;
-
- bucket = caml_alloc_small (1 + nargs, 0);
- Field(bucket, 0) = tag;
- for (i = 0; i < nargs; i++) Field(bucket, 1 + i) = args[i];
- caml_raise(bucket);
- CAMLnoreturn;
-}
-#endif
-
-#include <hivex.h>
-
-#define Hiveh_val(v) (*((hive_h **)Data_custom_val(v)))
-static value Val_hiveh (hive_h *);
-static int HiveOpenFlags_val (value);
-static hive_set_value *HiveSetValue_val (value);
-static hive_set_value *HiveSetValues_val (value);
-static hive_type HiveType_val (value);
-static value Val_hive_type (hive_type);
-static value copy_int_array (size_t *);
-static value copy_type_len (size_t, hive_type);
-static value copy_len_value (size_t, hive_value_h);
-static value copy_type_value (const char *, size_t, hive_type);
-static void raise_error (const char *) Noreturn;
-static void raise_closed (const char *) Noreturn;
-
-";
-
- (* The wrappers. *)
- List.iter (
- fun (name, style, _, _) ->
- pr "/* Automatically generated wrapper for function\n";
- pr " * "; generate_ocaml_prototype name style;
- pr " */\n";
- pr "\n";
-
- let c_params =
- List.map (function
- | ASetValues -> ["nrvalues"; "values"]
- | AUnusedFlags -> ["0"]
- | arg -> [name_of_argt arg]) (snd style) in
- let c_params =
- match fst style with
- | RLenType | RLenTypeVal -> c_params @ [["&t"; "&len"]]
- | RLenValue -> c_params @ [["&len"]]
- | _ -> c_params in
- let c_params = List.concat c_params in
-
- let params =
- filter_map (function
- | AUnusedFlags -> None
- | arg -> Some (name_of_argt arg ^ "v")) (snd style) in
-
- pr "/* Emit prototype to appease gcc's -Wmissing-prototypes. */\n";
- pr "CAMLprim value ocaml_hivex_%s (value %s" name (List.hd params);
- List.iter (pr ", value %s") (List.tl params); pr ");\n";
- pr "\n";
-
- pr "CAMLprim value\n";
- pr "ocaml_hivex_%s (value %s" name (List.hd params);
- List.iter (pr ", value %s") (List.tl params);
- pr ")\n";
- pr "{\n";
-
- pr " CAMLparam%d (%s);\n"
- (List.length params) (String.concat ", " params);
- pr " CAMLlocal1 (rv);\n";
- pr "\n";
-
- List.iter (
- function
- | AHive ->
- pr " hive_h *h = Hiveh_val (hv);\n";
- pr " if (h == NULL)\n";
- pr " raise_closed (\"%s\");\n" name
- | ANode n ->
- pr " hive_node_h %s = Int_val (%sv);\n" n n
- | AValue n ->
- pr " hive_value_h %s = Int_val (%sv);\n" n n
- | AString n ->
- pr " const char *%s = String_val (%sv);\n" n n
- | AStringNullable n ->
- pr " const char *%s =\n" n;
- pr " %sv != Val_int (0) ? String_val (Field (%sv, 0)) : NULL;\n"
- n n
- | AOpenFlags ->
- pr " int flags = HiveOpenFlags_val (flagsv);\n"
- | AUnusedFlags -> ()
- | ASetValues ->
- pr " int nrvalues = Wosize_val (valuesv);\n";
- pr " hive_set_value *values = HiveSetValues_val (valuesv);\n"
- | ASetValue ->
- pr " hive_set_value *val = HiveSetValue_val (valv);\n"
- ) (snd style);
- pr "\n";
-
- let error_code =
- match fst style with
- | RErr -> pr " int r;\n"; "-1"
- | RErrDispose -> pr " int r;\n"; "-1"
- | RHive -> pr " hive_h *r;\n"; "NULL"
- | RSize -> pr " size_t r;\n"; "0"
- | RNode -> pr " hive_node_h r;\n"; "0"
- | RNodeNotFound ->
- pr " errno = 0;\n";
- pr " hive_node_h r;\n";
- "0 && errno != 0"
- | RNodeList -> pr " hive_node_h *r;\n"; "NULL"
- | RValue -> pr " hive_value_h r;\n"; "0"
- | RValueList -> pr " hive_value_h *r;\n"; "NULL"
- | RString -> pr " char *r;\n"; "NULL"
- | RStringList -> pr " char **r;\n"; "NULL"
- | RLenType ->
- pr " int r;\n";
- pr " size_t len;\n";
- pr " hive_type t;\n";
- "-1"
- | RLenValue ->
- pr " errno = 0;";
- pr " hive_value_h r;\n";
- pr " size_t len;\n";
- "0 && errno != 0"
- | RLenTypeVal ->
- pr " char *r;\n";
- pr " size_t len;\n";
- pr " hive_type t;\n";
- "NULL"
- | RInt32 ->
- pr " errno = 0;\n";
- pr " int32_t r;\n";
- "-1 && errno != 0"
- | RInt64 ->
- pr " errno = 0;\n";
- pr " int64_t r;\n";
- "-1 && errno != 0" in
-
- (* The libguestfs OCaml bindings call enter_blocking_section
- * here. However I don't think that is safe, because we are
- * holding pointers to caml strings during the call, and these
- * could be moved or freed by other threads. In any case, there
- * is very little reason to enter_blocking_section for any hivex
- * call, so don't do it. XXX
- *)
- (*pr " caml_enter_blocking_section ();\n";*)
- pr " r = hivex_%s (%s" name (List.hd c_params);
- List.iter (pr ", %s") (List.tl c_params);
- pr ");\n";
- (*pr " caml_leave_blocking_section ();\n";*)
- pr "\n";
-
- (* Dispose of the hive handle (even if hivex_close returns error). *)
- (match fst style with
- | RErrDispose ->
- pr " /* So we don't double-free in the finalizer. */\n";
- pr " Hiveh_val (hv) = NULL;\n";
- pr "\n";
- | _ -> ()
- );
-
- List.iter (
- function
- | AHive | ANode _ | AValue _ | AString _ | AStringNullable _
- | AOpenFlags | AUnusedFlags -> ()
- | ASetValues ->
- pr " free (values);\n";
- pr "\n";
- | ASetValue ->
- pr " free (val);\n";
- pr "\n";
- ) (snd style);
-
- (* Check for errors. *)
- pr " if (r == %s)\n" error_code;
- pr " raise_error (\"%s\");\n" name;
- pr "\n";
-
- (match fst style with
- | RErr -> pr " rv = Val_unit;\n"
- | RErrDispose -> pr " rv = Val_unit;\n"
- | RHive -> pr " rv = Val_hiveh (r);\n"
- | RSize -> pr " rv = caml_copy_int64 (r);\n"
- | RNode -> pr " rv = Val_int (r);\n"
- | RNodeNotFound ->
- pr " if (r == 0)\n";
- pr " caml_raise_not_found ();\n";
- pr "\n";
- pr " rv = Val_int (r);\n"
- | RNodeList ->
- pr " rv = copy_int_array (r);\n";
- pr " free (r);\n"
- | RValue -> pr " rv = Val_int (r);\n"
- | RValueList ->
- pr " rv = copy_int_array (r);\n";
- pr " free (r);\n"
- | RString ->
- pr " rv = caml_copy_string (r);\n";
- pr " free (r);\n"
- | RStringList ->
- pr " rv = caml_copy_string_array ((const char **) r);\n";
- pr " int i;\n";
- pr " for (i = 0; r[i] != NULL; ++i) free (r[i]);\n";
- pr " free (r);\n"
- | RLenType -> pr " rv = copy_type_len (len, t);\n"
- | RLenValue -> pr " rv = copy_len_value (len, r);\n"
- | RLenTypeVal ->
- pr " rv = copy_type_value (r, len, t);\n";
- pr " free (r);\n"
- | RInt32 -> pr " rv = caml_copy_int32 (r);\n"
- | RInt64 -> pr " rv = caml_copy_int64 (r);\n"
- );
-
- pr " CAMLreturn (rv);\n";
- pr "}\n";
- pr "\n";
-
- ) functions;
-
- pr "\
-static int
-HiveOpenFlags_val (value v)
-{
- int flags = 0;
- value v2;
-
- while (v != Val_int (0)) {
- v2 = Field (v, 0);
- flags |= 1 << Int_val (v2);
- v = Field (v, 1);
- }
-
- return flags;
-}
-
-static hive_set_value *
-HiveSetValue_val (value v)
-{
- hive_set_value *val = malloc (sizeof (hive_set_value));
-
- val->key = String_val (Field (v, 0));
- val->t = HiveType_val (Field (v, 1));
- val->len = caml_string_length (Field (v, 2));
- val->value = String_val (Field (v, 2));
-
- return val;
-}
-
-static hive_set_value *
-HiveSetValues_val (value v)
-{
- size_t nr_values = Wosize_val (v);
- hive_set_value *values = malloc (nr_values * sizeof (hive_set_value));
- size_t i;
- value v2;
-
- for (i = 0; i < nr_values; ++i) {
- v2 = Field (v, i);
- values[i].key = String_val (Field (v2, 0));
- values[i].t = HiveType_val (Field (v2, 1));
- values[i].len = caml_string_length (Field (v2, 2));
- values[i].value = String_val (Field (v2, 2));
- }
-
- return values;
-}
-
-static hive_type
-HiveType_val (value v)
-{
- if (Is_long (v))
- return Int_val (v); /* REG_NONE etc. */
- else
- return Int32_val (Field (v, 0)); /* REG_UNKNOWN of int32 */
-}
-
-static value
-Val_hive_type (hive_type t)
-{
- CAMLparam0 ();
- CAMLlocal2 (rv, v);
-
- if (t <= %d)
- CAMLreturn (Val_int (t));
- else {
- rv = caml_alloc (1, 0); /* REG_UNKNOWN of int32 */
- v = caml_copy_int32 (t);
- caml_modify (&Field (rv, 0), v);
- CAMLreturn (rv);
- }
-}
-
-static value
-copy_int_array (size_t *xs)
-{
- CAMLparam0 ();
- CAMLlocal2 (v, rv);
- size_t nr, i;
-
- for (nr = 0; xs[nr] != 0; ++nr)
- ;
- if (nr == 0)
- CAMLreturn (Atom (0));
- else {
- rv = caml_alloc (nr, 0);
- for (i = 0; i < nr; ++i) {
- v = Val_int (xs[i]);
- Store_field (rv, i, v); /* Safe because v is not a block. */
- }
- CAMLreturn (rv);
- }
-}
-
-static value
-copy_type_len (size_t len, hive_type t)
-{
- CAMLparam0 ();
- CAMLlocal2 (v, rv);
-
- rv = caml_alloc (2, 0);
- v = Val_hive_type (t);
- Store_field (rv, 0, v);
- v = Val_int (len);
- Store_field (rv, 1, v);
- CAMLreturn (rv);
-}
-
-static value
-copy_len_value (size_t len, hive_value_h r)
-{
- CAMLparam0 ();
- CAMLlocal2 (v, rv);
-
- rv = caml_alloc (2, 0);
- v = Val_int (len);
- Store_field (rv, 0, v);
- v = Val_int (r);
- Store_field (rv, 1, v);
- CAMLreturn (rv);
-}
-
-static value
-copy_type_value (const char *r, size_t len, hive_type t)
-{
- CAMLparam0 ();
- CAMLlocal2 (v, rv);
-
- rv = caml_alloc (2, 0);
- v = Val_hive_type (t);
- Store_field (rv, 0, v);
- v = caml_alloc_string (len);
- memcpy (String_val (v), r, len);
- caml_modify (&Field (rv, 1), v);
- CAMLreturn (rv);
-}
-
-/* Raise exceptions. */
-static void
-raise_error (const char *function)
-{
- /* Save errno early in case it gets trashed. */
- int err = errno;
-
- CAMLparam0 ();
- CAMLlocal3 (v1, v2, v3);
-
- v1 = caml_copy_string (function);
- v2 = unix_error_of_code (err);
- v3 = caml_copy_string (strerror (err));
- value vvv[] = { v1, v2, v3 };
- caml_raise_with_args (*caml_named_value (\"ocaml_hivex_error\"), 3, vvv);
-
- CAMLnoreturn;
-}
-
-static void
-raise_closed (const char *function)
-{
- CAMLparam0 ();
- CAMLlocal1 (v);
-
- v = caml_copy_string (function);
- caml_raise_with_arg (*caml_named_value (\"ocaml_hivex_closed\"), v);
-
- CAMLnoreturn;
-}
-
-/* Allocate handles and deal with finalization. */
-static void
-hivex_finalize (value hv)
-{
- hive_h *h = Hiveh_val (hv);
- if (h) hivex_close (h);
-}
-
-static struct custom_operations hivex_custom_operations = {
- (char *) \"hivex_custom_operations\",
- hivex_finalize,
- custom_compare_default,
- custom_hash_default,
- custom_serialize_default,
- custom_deserialize_default
-};
-
-static value
-Val_hiveh (hive_h *h)
-{
- CAMLparam0 ();
- CAMLlocal1 (rv);
-
- rv = caml_alloc_custom (&hivex_custom_operations,
- sizeof (hive_h *), 0, 1);
- Hiveh_val (rv) = h;
-
- CAMLreturn (rv);
-}
-" max_hive_type
-
-and generate_perl_pm () =
- generate_header HashStyle LGPLv2plus;
-
- pr "\
-=pod
-
-=head1 NAME
-
-Win::Hivex - Perl bindings for reading and writing Windows Registry hive files
-
-=head1 SYNOPSIS
-
- use Win::Hivex;
-
- $h = Win::Hivex->open ('SOFTWARE');
- $root_node = $h->root ();
- print $h->node_name ($root_node);
-
-=head1 DESCRIPTION
-
-The C<Win::Hivex> module provides a Perl XS binding to the
-L<hivex(3)> API for reading and writing Windows Registry binary
-hive files.
-
-=head1 ERRORS
-
-All errors turn into calls to C<croak> (see L<Carp(3)>).
-
-=head1 METHODS
-
-=over 4
-
-=cut
-
-package Win::Hivex;
-
-use strict;
-use warnings;
-
-require XSLoader;
-XSLoader::load ('Win::Hivex');
-
-=item open
-
- $h = Win::Hivex->open ($filename,";
-
- List.iter (
- fun (_, flag, _) ->
- pr "\n [%s => 1,]" (String.lowercase flag)
- ) open_flags;
-
- pr ")
-
-Open a Windows Registry binary hive file.
-
-The C<verbose> and C<debug> flags enable different levels of
-debugging messages.
-
-The C<write> flag is required if you will be modifying the
-hive file (see L<hivex(3)/WRITING TO HIVE FILES>).
-
-This function returns a hive handle. The hive handle is
-closed automatically when its reference count drops to 0.
-
-=cut
-
-sub open {
- my $proto = shift;
- my $class = ref ($proto) || $proto;
- my $filename = shift;
- my %%flags = @_;
- my $flags = 0;
-
-";
-
- List.iter (
- fun (n, flag, description) ->
- pr " # %s\n" description;
- pr " $flags += %d if $flags{%s};\n" n (String.lowercase flag)
- ) open_flags;
-
- pr "\
-
- my $self = Win::Hivex::_open ($filename, $flags);
- bless $self, $class;
- return $self;
-}
-
-";
-
- List.iter (
- fun (name, style, _, longdesc) ->
- (* The close call isn't explicit in Perl: handles are closed
- * when their reference count drops to 0.
- *
- * The open call is coded specially in Perl.
- *
- * Therefore we don't generate prototypes for these two calls:
- *)
- if fst style <> RErrDispose && List.hd (snd style) = AHive then (
- let longdesc = replace_str longdesc "C<hivex_" "C<" in
- pr "=item %s\n\n " name;
- generate_perl_prototype name style;
- pr "\n\n";
- pr "%s\n\n" longdesc;
-
- (match fst style with
- | RErr
- | RErrDispose
- | RHive
- | RString
- | RStringList
- | RLenType
- | RLenValue
- | RLenTypeVal
- | RInt32
- | RInt64 -> ()
- | RSize ->
- pr "\
-This returns a size.\n\n"
- | RNode ->
- pr "\
-This returns a node handle.\n\n"
- | RNodeNotFound ->
- pr "\
-This returns a node handle, or C<undef> if the node was not found.\n\n"
- | RNodeList ->
- pr "\
-This returns a list of node handles.\n\n"
- | RValue ->
- pr "\
-This returns a value handle.\n\n"
- | RValueList ->
- pr "\
-This returns a list of value handles.\n\n"
- );
-
- if List.mem ASetValues (snd style) then
- pr "C<@values> is an array of (keys, value) pairs.
-Each element should be a hashref containing C<key>, C<t> (type)
-and C<data>.
-
-Any existing values stored at the node are discarded, and their
-C<value> handles become invalid. Thus you can remove all
-values stored at C<node> by passing C<@values = []>.\n\n"
- )
- ) functions;
-
- pr "\
-=cut
-
-1;
-
-=back
-
-=head1 COPYRIGHT
-
-Copyright (C) %s Red Hat Inc.
-
-=head1 LICENSE
-
-Please see the file COPYING.LIB for the full license.
-
-=head1 SEE ALSO
-
-L<hivex(3)>,
-L<hivexsh(1)>,
-L<http://libguestfs.org>,
-L<Sys::Guestfs(3)>.
-
-=cut
-" copyright_years
-
-and generate_perl_prototype name style =
- (* Return type. *)
- (match fst style with
- | RErr
- | RErrDispose -> ()
- | RHive -> pr "$h = "
- | RSize -> pr "$size = "
- | RNode
- | RNodeNotFound -> pr "$node = "
- | RNodeList -> pr "@nodes = "
- | RValue -> pr "$value = "
- | RValueList -> pr "@values = "
- | RString -> pr "$string = "
- | RStringList -> pr "@strings = "
- | RLenType -> pr "($type, $len) = "
- | RLenValue -> pr "($len, $value) = "
- | RLenTypeVal -> pr "($type, $data) = "
- | RInt32 -> pr "$int32 = "
- | RInt64 -> pr "$int64 = "
- );
-
- let args = List.tl (snd style) in
-
- (* AUnusedFlags is dropped in the bindings. *)
- let args = List.filter ((<>) AUnusedFlags) args in
-
- pr "$h->%s (" name;
-
- let comma = ref false in
- List.iter (
- fun arg ->
- if !comma then pr ", "; comma := true;
- match arg with
- | AHive -> pr "$h"
- | ANode n
- | AValue n
- | AString n -> pr "$%s" n
- | AStringNullable n -> pr "[$%s|undef]" n
- | AOpenFlags -> pr "[flags]"
- | AUnusedFlags -> assert false
- | ASetValues -> pr "\\@values"
- | ASetValue -> pr "$val"
- ) args;
-
- pr ")"
-
-and generate_perl_xs () =
- generate_header CStyle LGPLv2plus;
-
- pr "\
-#include \"EXTERN.h\"
-#include \"perl.h\"
-#include \"XSUB.h\"
-
-#include <string.h>
-#include <hivex.h>
-#include <inttypes.h>
-
-static SV *
-my_newSVll(long long val) {
-#ifdef USE_64_BIT_ALL
- return newSViv(val);
-#else
- char buf[100];
- int len;
- len = snprintf(buf, 100, \"%%\" PRId64, val);
- return newSVpv(buf, len);
-#endif
-}
-
-#if 0
-static SV *
-my_newSVull(unsigned long long val) {
-#ifdef USE_64_BIT_ALL
- return newSVuv(val);
-#else
- char buf[100];
- int len;
- len = snprintf(buf, 100, \"%%\" PRIu64, val);
- return newSVpv(buf, len);
-#endif
-}
-#endif
-
-#if 0
-/* http://www.perlmonks.org/?node_id=680842 */
-static char **
-XS_unpack_charPtrPtr (SV *arg) {
- char **ret;
- AV *av;
- I32 i;
-
- if (!arg || !SvOK (arg) || !SvROK (arg) || SvTYPE (SvRV (arg)) != SVt_PVAV)
- croak (\"array reference expected\");
-
- av = (AV *)SvRV (arg);
- ret = malloc ((av_len (av) + 1 + 1) * sizeof (char *));
- if (!ret)
- croak (\"malloc failed\");
-
- for (i = 0; i <= av_len (av); i++) {
- SV **elem = av_fetch (av, i, 0);
-
- if (!elem || !*elem)
- croak (\"missing element in list\");
-
- ret[i] = SvPV_nolen (*elem);
- }
-
- ret[i] = NULL;
-
- return ret;
-}
-#endif
-
-/* Handle set_values parameter. */
-typedef struct pl_set_values {
- size_t nr_values;
- hive_set_value *values;
-} pl_set_values;
-
-static pl_set_values
-unpack_pl_set_values (SV *sv)
-{
- pl_set_values ret;
- AV *av;
- I32 i;
-
- if (!sv || !SvOK (sv) || !SvROK (sv) || SvTYPE (SvRV (sv)) != SVt_PVAV)
- croak (\"array reference expected\");
-
- av = (AV *)SvRV(sv);
- ret.nr_values = av_len (av) + 1;
- ret.values = malloc (ret.nr_values * sizeof (hive_set_value));
- if (!ret.values)
- croak (\"malloc failed\");
-
- for (i = 0; i <= av_len (av); i++) {
- SV **hvp = av_fetch (av, i, 0);
-
- if (!hvp || !*hvp || !SvROK (*hvp) || SvTYPE (SvRV (*hvp)) != SVt_PVHV)
- croak (\"missing element in list or not a hash ref\");
-
- HV *hv = (HV *)SvRV(*hvp);
-
- SV **svp;
- svp = hv_fetch (hv, \"key\", 3, 0);
- if (!svp || !*svp)
- croak (\"missing 'key' in hash\");
- ret.values[i].key = SvPV_nolen (*svp);
-
- svp = hv_fetch (hv, \"t\", 1, 0);
- if (!svp || !*svp)
- croak (\"missing 't' in hash\");
- ret.values[i].t = SvIV (*svp);
-
- svp = hv_fetch (hv, \"value\", 5, 0);
- if (!svp || !*svp)
- croak (\"missing 'value' in hash\");
- ret.values[i].value = SvPV (*svp, ret.values[i].len);
- }
-
- return ret;
-}
-
-static hive_set_value *
-unpack_set_value (SV *sv)
-{
- hive_set_value *ret;
-
- if (!sv || !SvROK (sv) || SvTYPE (SvRV (sv)) != SVt_PVHV)
- croak (\"not a hash ref\");
-
- ret = malloc (sizeof (hive_set_value));
- if (ret == NULL)
- croak (\"malloc failed\");
-
- HV *hv = (HV *)SvRV(sv);
-
- SV **svp;
- svp = hv_fetch (hv, \"key\", 3, 0);
- if (!svp || !*svp)
- croak (\"missing 'key' in hash\");
- ret->key = SvPV_nolen (*svp);
-
- svp = hv_fetch (hv, \"t\", 1, 0);
- if (!svp || !*svp)
- croak (\"missing 't' in hash\");
- ret->t = SvIV (*svp);
-
- svp = hv_fetch (hv, \"value\", 5, 0);
- if (!svp || !*svp)
- croak (\"missing 'value' in hash\");
- ret->value = SvPV (*svp, ret->len);
-
- return ret;
-}
-
-MODULE = Win::Hivex PACKAGE = Win::Hivex
-
-PROTOTYPES: ENABLE
-
-hive_h *
-_open (filename, flags)
- char *filename;
- int flags;
- CODE:
- RETVAL = hivex_open (filename, flags);
- if (!RETVAL)
- croak (\"hivex_open: %%s: %%s\", filename, strerror (errno));
- OUTPUT:
- RETVAL
-
-void
-DESTROY (h)
- hive_h *h;
- PPCODE:
- if (hivex_close (h) == -1)
- croak (\"hivex_close: %%s\", strerror (errno));
-
-";
-
- List.iter (
- fun (name, style, _, longdesc) ->
- (* The close and open calls are handled specially above. *)
- if fst style <> RErrDispose && List.hd (snd style) = AHive then (
- (match fst style with
- | RErr -> pr "void\n"
- | RErrDispose -> failwith "perl bindings cannot handle a call which disposes of the handle"
- | RHive -> failwith "perl bindings cannot handle a call which returns a handle"
- | RSize
- | RNode
- | RNodeNotFound
- | RValue
- | RString -> pr "SV *\n"
- | RNodeList
- | RValueList
- | RStringList
- | RLenType
- | RLenValue
- | RLenTypeVal -> pr "void\n"
- | RInt32 -> pr "SV *\n"
- | RInt64 -> pr "SV *\n"
- );
-
- (* Call and arguments. *)
- let perl_params =
- filter_map (function
- | AUnusedFlags -> None
- | arg -> Some (name_of_argt arg)) (snd style) in
-
- let c_params =
- List.map (function
- | AUnusedFlags -> "0"
- | ASetValues -> "values.nr_values, values.values"
- | arg -> name_of_argt arg) (snd style) in
-
- pr "%s (%s)\n" name (String.concat ", " perl_params);
- iteri (
- fun i ->
- function
- | AHive ->
- pr " hive_h *h;\n"
- | ANode n
- | AValue n ->
- pr " int %s;\n" n
- | AString n ->
- pr " char *%s;\n" n
- | AStringNullable n ->
- (* http://www.perlmonks.org/?node_id=554277 *)
- pr " char *%s = SvOK(ST(%d)) ? SvPV_nolen(ST(%d)) : NULL;\n" n i i
- | AOpenFlags ->
- pr " int flags;\n"
- | AUnusedFlags -> ()
- | ASetValues ->
- pr " pl_set_values values = unpack_pl_set_values (ST(%d));\n" i
- | ASetValue ->
- pr " hive_set_value *val = unpack_set_value (ST(%d));\n" i
- ) (snd style);
-
- let free_args () =
- List.iter (
- function
- | ASetValues ->
- pr " free (values.values);\n"
- | ASetValue ->
- pr " free (val);\n"
- | AHive | ANode _ | AValue _ | AString _ | AStringNullable _
- | AOpenFlags | AUnusedFlags -> ()
- ) (snd style)
- in
-
- (* Code. *)
- (match fst style with
- | RErr ->
- pr "PREINIT:\n";
- pr " int r;\n";
- pr " PPCODE:\n";
- pr " r = hivex_%s (%s);\n"
- name (String.concat ", " c_params);
- free_args ();
- pr " if (r == -1)\n";
- pr " croak (\"%%s: %%s\", \"%s\", strerror (errno));\n"
- name;
-
- | RErrDispose -> assert false
- | RHive -> assert false
-
- | RSize
- | RNode
- | RValue ->
- pr "PREINIT:\n";
- pr " /* hive_node_h = hive_value_h = size_t so we cheat\n";
- pr " here to simplify the generator */\n";
- pr " size_t r;\n";
- pr " CODE:\n";
- pr " r = hivex_%s (%s);\n"
- name (String.concat ", " c_params);
- free_args ();
- pr " if (r == 0)\n";
- pr " croak (\"%%s: %%s\", \"%s\", strerror (errno));\n"
- name;
- pr " RETVAL = newSViv (r);\n";
- pr " OUTPUT:\n";
- pr " RETVAL\n"
-
- | RNodeNotFound ->
- pr "PREINIT:\n";
- pr " hive_node_h r;\n";
- pr " CODE:\n";
- pr " errno = 0;\n";
- pr " r = hivex_%s (%s);\n"
- name (String.concat ", " c_params);
- free_args ();
- pr " if (r == 0 && errno != 0)\n";
- pr " croak (\"%%s: %%s\", \"%s\", strerror (errno));\n"
- name;
- pr " if (r == 0)\n";
- pr " RETVAL = &PL_sv_undef;\n";
- pr " else\n";
- pr " RETVAL = newSViv (r);\n";
- pr " OUTPUT:\n";
- pr " RETVAL\n"
-
- | RString ->
- pr "PREINIT:\n";
- pr " char *r;\n";
- pr " CODE:\n";
- pr " r = hivex_%s (%s);\n"
- name (String.concat ", " c_params);
- free_args ();
- pr " if (r == NULL)\n";
- pr " croak (\"%%s: %%s\", \"%s\", strerror (errno));\n"
- name;
- pr " RETVAL = newSVpv (r, 0);\n";
- pr " free (r);\n";
- pr " OUTPUT:\n";
- pr " RETVAL\n"
-
- | RNodeList
- | RValueList ->
- pr "PREINIT:\n";
- pr " size_t *r;\n";
- pr " int i, n;\n";
- pr " PPCODE:\n";
- pr " r = hivex_%s (%s);\n"
- name (String.concat ", " c_params);
- free_args ();
- pr " if (r == NULL)\n";
- pr " croak (\"%%s: %%s\", \"%s\", strerror (errno));\n"
- name;
- pr " for (n = 0; r[n] != 0; ++n) /**/;\n";
- pr " EXTEND (SP, n);\n";
- pr " for (i = 0; i < n; ++i)\n";
- pr " PUSHs (sv_2mortal (newSViv (r[i])));\n";
- pr " free (r);\n";
-
- | RStringList ->
- pr "PREINIT:\n";
- pr " char **r;\n";
- pr " int i, n;\n";
- pr " PPCODE:\n";
- pr " r = hivex_%s (%s);\n"
- name (String.concat ", " c_params);
- free_args ();
- pr " if (r == NULL)\n";
- pr " croak (\"%%s: %%s\", \"%s\", strerror (errno));\n"
- name;
- pr " for (n = 0; r[n] != NULL; ++n) /**/;\n";
- pr " EXTEND (SP, n);\n";
- pr " for (i = 0; i < n; ++i) {\n";
- pr " PUSHs (sv_2mortal (newSVpv (r[i], 0)));\n";
- pr " free (r[i]);\n";
- pr " }\n";
- pr " free (r);\n";
-
- | RLenType ->
- pr "PREINIT:\n";
- pr " int r;\n";
- pr " size_t len;\n";
- pr " hive_type type;\n";
- pr " PPCODE:\n";
- pr " r = hivex_%s (%s, &type, &len);\n"
- name (String.concat ", " c_params);
- free_args ();
- pr " if (r == -1)\n";
- pr " croak (\"%%s: %%s\", \"%s\", strerror (errno));\n"
- name;
- pr " EXTEND (SP, 2);\n";
- pr " PUSHs (sv_2mortal (newSViv (type)));\n";
- pr " PUSHs (sv_2mortal (newSViv (len)));\n";
-
- | RLenValue ->
- pr "PREINIT:\n";
- pr " hive_value_h r;\n";
- pr " size_t len;\n";
- pr " PPCODE:\n";
- pr " errno = 0;\n";
- pr " r = hivex_%s (%s, &len);\n"
- name (String.concat ", " c_params);
- free_args ();
- pr " if (r == 0 && errno)\n";
- pr " croak (\"%%s: \", \"%s\", strerror (errno));\n"
- name;
- pr " EXTEND (SP, 2);\n";
- pr " PUSHs (sv_2mortal (newSViv (len)));\n";
- pr " PUSHs (sv_2mortal (newSViv (r)));\n";
-
- | RLenTypeVal ->
- pr "PREINIT:\n";
- pr " char *r;\n";
- pr " size_t len;\n";
- pr " hive_type type;\n";
- pr " PPCODE:\n";
- pr " r = hivex_%s (%s, &type, &len);\n"
- name (String.concat ", " c_params);
- free_args ();
- pr " if (r == NULL)\n";
- pr " croak (\"%%s: %%s\", \"%s\", strerror (errno));\n"
- name;
- pr " EXTEND (SP, 2);\n";
- pr " PUSHs (sv_2mortal (newSViv (type)));\n";
- pr " PUSHs (sv_2mortal (newSVpvn (r, len)));\n";
- pr " free (r);\n";
-
- | RInt32 ->
- pr "PREINIT:\n";
- pr " int32_t r;\n";
- pr " CODE:\n";
- pr " errno = 0;\n";
- pr " r = hivex_%s (%s);\n"
- name (String.concat ", " c_params);
- free_args ();
- pr " if (r == -1 && errno != 0)\n";
- pr " croak (\"%%s: %%s\", \"%s\", strerror (errno));\n"
- name;
- pr " RETVAL = newSViv (r);\n";
- pr " OUTPUT:\n";
- pr " RETVAL\n"
-
- | RInt64 ->
- pr "PREINIT:\n";
- pr " int64_t r;\n";
- pr " CODE:\n";
- pr " errno = 0;\n";
- pr " r = hivex_%s (%s);\n"
- name (String.concat ", " c_params);
- free_args ();
- pr " if (r == -1 && errno != 0)\n";
- pr " croak (\"%%s: %%s\", \"%s\", strerror (errno));\n"
- name;
- pr " RETVAL = my_newSVll (r);\n";
- pr " OUTPUT:\n";
- pr " RETVAL\n"
- );
- pr "\n"
- )
- ) functions
-
-and generate_python_c () =
- generate_header CStyle LGPLv2plus;
-
- pr "\
-#include <config.h>
-
-#define PY_SSIZE_T_CLEAN 1
-#include <Python.h>
-
-#if PY_VERSION_HEX < 0x02050000
-typedef int Py_ssize_t;
-#define PY_SSIZE_T_MAX INT_MAX
-#define PY_SSIZE_T_MIN INT_MIN
-#endif
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <assert.h>
-
-#include \"hivex.h\"
-
-#ifndef HAVE_PYCAPSULE_NEW
-typedef struct {
- PyObject_HEAD
- hive_h *h;
-} Pyhivex_Object;
-#endif
-
-static hive_h *
-get_handle (PyObject *obj)
-{
- assert (obj);
- assert (obj != Py_None);
-#ifndef HAVE_PYCAPSULE_NEW
- return ((Pyhivex_Object *) obj)->h;
-#else
- return (hive_h *) PyCapsule_GetPointer(obj, \"hive_h\");
-#endif
-}
-
-static PyObject *
-put_handle (hive_h *h)
-{
- assert (h);
-#ifndef HAVE_PYCAPSULE_NEW
- return
- PyCObject_FromVoidPtrAndDesc ((void *) h, (char *) \"hive_h\", NULL);
-#else
- return PyCapsule_New ((void *) h, \"hive_h\", NULL);
-#endif
-}
-
-/* This returns pointers into the Python objects, which should
- * not be freed.
- */
-static int
-get_value (PyObject *v, hive_set_value *ret)
-{
- PyObject *obj;
-#ifndef HAVE_PYSTRING_ASSTRING
- PyObject *bytes;
-#endif
-
- obj = PyDict_GetItemString (v, \"key\");
- if (!obj) {
- PyErr_SetString (PyExc_RuntimeError, \"no 'key' element in dictionary\");
- return -1;
- }
-#ifdef HAVE_PYSTRING_ASSTRING
- ret->key = PyString_AsString (obj);
-#else
- bytes = PyUnicode_AsUTF8String (obj);
- ret->key = PyBytes_AS_STRING (bytes);
-#endif
-
- obj = PyDict_GetItemString (v, \"t\");
- if (!obj) {
- PyErr_SetString (PyExc_RuntimeError, \"no 't' element in dictionary\");
- return -1;
- }
- ret->t = PyLong_AsLong (obj);
-
- obj = PyDict_GetItemString (v, \"value\");
- if (!obj) {
- PyErr_SetString (PyExc_RuntimeError, \"no 'value' element in dictionary\");
- return -1;
- }
-#ifdef HAVE_PYSTRING_ASSTRING
- ret->value = PyString_AsString (obj);
- ret->len = PyString_Size (obj);
-#else
- bytes = PyUnicode_AsUTF8String (obj);
- ret->value = PyBytes_AS_STRING (bytes);
- ret->len = PyBytes_GET_SIZE (bytes);
-#endif
-
- return 0;
-}
-
-typedef struct py_set_values {
- size_t nr_values;
- hive_set_value *values;
-} py_set_values;
-
-static int
-get_values (PyObject *v, py_set_values *ret)
-{
- Py_ssize_t slen;
- size_t len, i;
-
- if (!PyList_Check (v)) {
- PyErr_SetString (PyExc_RuntimeError, \"expecting a list parameter\");
- return -1;
- }
-
- slen = PyList_Size (v);
- if (slen < 0) {
- PyErr_SetString (PyExc_RuntimeError, \"get_string_list: PyList_Size failure\");
- return -1;
- }
- len = (size_t) slen;
- ret->nr_values = len;
- ret->values = malloc (len * sizeof (hive_set_value));
- if (!ret->values) {
- PyErr_SetString (PyExc_RuntimeError, strerror (errno));
- return -1;
- }
-
- for (i = 0; i < len; ++i) {
- if (get_value (PyList_GetItem (v, i), &(ret->values[i])) == -1) {
- free (ret->values);
- return -1;
- }
- }
-
- return 0;
-}
-
-static PyObject *
-put_string_list (char * const * const argv)
-{
- PyObject *list;
- size_t argc, i;
-
- for (argc = 0; argv[argc] != NULL; ++argc)
- ;
-
- list = PyList_New (argc);
- for (i = 0; i < argc; ++i) {
-#ifdef HAVE_PYSTRING_ASSTRING
- PyList_SetItem (list, i, PyString_FromString (argv[i]));
-#else
- PyList_SetItem (list, i, PyUnicode_FromString (argv[i]));
-#endif
- }
-
- return list;
-}
-
-static void
-free_strings (char **argv)
-{
- size_t argc;
-
- for (argc = 0; argv[argc] != NULL; ++argc)
- free (argv[argc]);
- free (argv);
-}
-
-/* Since hive_node_t is the same as hive_value_t this also works for values. */
-static PyObject *
-put_node_list (hive_node_h *nodes)
-{
- PyObject *list;
- size_t argc, i;
-
- for (argc = 0; nodes[argc] != 0; ++argc)
- ;
-
- list = PyList_New (argc);
- for (i = 0; i < argc; ++i)
- PyList_SetItem (list, i, PyLong_FromLongLong ((long) nodes[i]));
-
- return list;
-}
-
-static PyObject *
-put_len_type (size_t len, hive_type t)
-{
- PyObject *r = PyTuple_New (2);
- PyTuple_SetItem (r, 0, PyLong_FromLong ((long) t));
- PyTuple_SetItem (r, 1, PyLong_FromLongLong ((long) len));
- return r;
-}
-
-static PyObject *
-put_len_val (size_t len, hive_value_h value)
-{
- PyObject *r = PyTuple_New (2);
- PyTuple_SetItem (r, 0, PyLong_FromLongLong ((long) len));
- PyTuple_SetItem (r, 1, PyLong_FromLongLong ((long) value));
- return r;
-}
-
-static PyObject *
-put_val_type (char *val, size_t len, hive_type t)
-{
- PyObject *r = PyTuple_New (2);
- PyTuple_SetItem (r, 0, PyLong_FromLong ((long) t));
-#ifdef HAVE_PYSTRING_ASSTRING
- PyTuple_SetItem (r, 1, PyString_FromStringAndSize (val, len));
-#else
- PyTuple_SetItem (r, 1, PyBytes_FromStringAndSize (val, len));
-#endif
- return r;
-}
-
-";
-
- (* Generate functions. *)
- List.iter (
- fun (name, style, _, longdesc) ->
- pr "static PyObject *\n";
- pr "py_hivex_%s (PyObject *self, PyObject *args)\n" name;
- pr "{\n";
- pr " PyObject *py_r;\n";
-
- let error_code =
- match fst style with
- | RErr -> pr " int r;\n"; "-1"
- | RErrDispose -> pr " int r;\n"; "-1"
- | RHive -> pr " hive_h *r;\n"; "NULL"
- | RSize -> pr " size_t r;\n"; "0"
- | RNode -> pr " hive_node_h r;\n"; "0"
- | RNodeNotFound ->
- pr " errno = 0;\n";
- pr " hive_node_h r;\n";
- "0 && errno != 0"
- | RNodeList -> pr " hive_node_h *r;\n"; "NULL"
- | RValue -> pr " hive_value_h r;\n"; "0"
- | RValueList -> pr " hive_value_h *r;\n"; "NULL"
- | RString -> pr " char *r;\n"; "NULL"
- | RStringList -> pr " char **r;\n"; "NULL"
- | RLenType ->
- pr " int r;\n";
- pr " size_t len;\n";
- pr " hive_type t;\n";
- "-1"
- | RLenValue ->
- pr " errno = 0;\n";
- pr " int r;\n";
- pr " size_t len;\n";
- "0 && errno != 0"
- | RLenTypeVal ->
- pr " char *r;\n";
- pr " size_t len;\n";
- pr " hive_type t;\n";
- "NULL"
- | RInt32 ->
- pr " errno = 0;\n";
- pr " int32_t r;\n";
- "-1 && errno != 0"
- | RInt64 ->
- pr " errno = 0;\n";
- pr " int64_t r;\n";
- "-1 && errno != 0" in
-
- (* Call and arguments. *)
- let c_params =
- List.map (function
- | AUnusedFlags -> "0"
- | ASetValues -> "values.nr_values, values.values"
- | ASetValue -> "&val"
- | arg -> name_of_argt arg) (snd style) in
- let c_params =
- match fst style with
- | RLenType | RLenTypeVal -> c_params @ ["&t"; "&len"]
- | RLenValue -> c_params @ ["&len"]
- | _ -> c_params in
-
- List.iter (
- function
- | AHive ->
- pr " hive_h *h;\n";
- pr " PyObject *py_h;\n"
- | ANode n
- | AValue n ->
- pr " long %s;\n" n
- | AString n
- | AStringNullable n ->
- pr " char *%s;\n" n
- | AOpenFlags ->
- pr " int flags;\n"
- | AUnusedFlags -> ()
- | ASetValues ->
- pr " py_set_values values;\n";
- pr " PyObject *py_values;\n"
- | ASetValue ->
- pr " hive_set_value val;\n";
- pr " PyObject *py_val;\n"
- ) (snd style);
-
- pr "\n";
-
- (* Convert the required parameters. *)
- pr " if (!PyArg_ParseTuple (args, (char *) \"";
- List.iter (
- function
- | AHive ->
- pr "O"
- | ANode n
- | AValue n ->
- pr "l"
- | AString n ->
- pr "s"
- | AStringNullable n ->
- pr "z"
- | AOpenFlags ->
- pr "i"
- | AUnusedFlags -> ()
- | ASetValues
- | ASetValue ->
- pr "O"
- ) (snd style);
-
- pr ":hivex_%s\"" name;
-
- List.iter (
- function
- | AHive ->
- pr ", &py_h"
- | ANode n
- | AValue n ->
- pr ", &%s" n
- | AString n
- | AStringNullable n ->
- pr ", &%s" n
- | AOpenFlags ->
- pr ", &flags"
- | AUnusedFlags -> ()
- | ASetValues ->
- pr ", &py_values"
- | ASetValue ->
- pr ", &py_val"
- ) (snd style);
-
- pr "))\n";
- pr " return NULL;\n";
-
- (* Convert some Python argument types to C. *)
- List.iter (
- function
- | AHive ->
- pr " h = get_handle (py_h);\n"
- | ANode _
- | AValue _
- | AString _
- | AStringNullable _
- | AOpenFlags
- | AUnusedFlags -> ()
- | ASetValues ->
- pr " if (get_values (py_values, &values) == -1)\n";
- pr " return NULL;\n"
- | ASetValue ->
- pr " if (get_value (py_val, &val) == -1)\n";
- pr " return NULL;\n"
- ) (snd style);
-
- (* Call the C function. *)
- pr " r = hivex_%s (%s);\n" name (String.concat ", " c_params);
-
- (* Free up arguments. *)
- List.iter (
- function
- | AHive | ANode _ | AValue _
- | AString _ | AStringNullable _
- | AOpenFlags | AUnusedFlags -> ()
- | ASetValues ->
- pr " free (values.values);\n"
- | ASetValue -> ()
- ) (snd style);
-
- (* Check for errors from C library. *)
- pr " if (r == %s) {\n" error_code;
- pr " PyErr_SetString (PyExc_RuntimeError,\n";
- pr " strerror (errno));\n";
- pr " return NULL;\n";
- pr " }\n";
- pr "\n";
-
- (* Convert return value to Python. *)
- (match fst style with
- | RErr
- | RErrDispose ->
- pr " Py_INCREF (Py_None);\n";
- pr " py_r = Py_None;\n"
- | RHive ->
- pr " py_r = put_handle (r);\n"
- | RSize
- | RNode ->
- pr " py_r = PyLong_FromLongLong (r);\n"
- | RNodeNotFound ->
- pr " if (r)\n";
- pr " py_r = PyLong_FromLongLong (r);\n";
- pr " else {\n";
- pr " Py_INCREF (Py_None);\n";
- pr " py_r = Py_None;\n";
- pr " }\n";
- | RNodeList
- | RValueList ->
- pr " py_r = put_node_list (r);\n";
- pr " free (r);\n"
- | RValue ->
- pr " py_r = PyLong_FromLongLong (r);\n"
- | RString ->
- pr "#ifdef HAVE_PYSTRING_ASSTRING\n";
- pr " py_r = PyString_FromString (r);\n";
- pr "#else\n";
- pr " py_r = PyUnicode_FromString (r);\n";
- pr "#endif\n";
- pr " free (r);"
- | RStringList ->
- pr " py_r = put_string_list (r);\n";
- pr " free_strings (r);\n"
- | RLenType ->
- pr " py_r = put_len_type (len, t);\n"
- | RLenValue ->
- pr " py_r = put_len_val (len, r);\n"
- | RLenTypeVal ->
- pr " py_r = put_val_type (r, len, t);\n";
- pr " free (r);\n"
- | RInt32 ->
- pr " py_r = PyLong_FromLong ((long) r);\n"
- | RInt64 ->
- pr " py_r = PyLong_FromLongLong (r);\n"
- );
- pr " return py_r;\n";
- pr "}\n";
- pr "\n"
- ) functions;
-
- (* Table of functions. *)
- pr "static PyMethodDef methods[] = {\n";
- List.iter (
- fun (name, _, _, _) ->
- pr " { (char *) \"%s\", py_hivex_%s, METH_VARARGS, NULL },\n"
- name name
- ) functions;
- pr " { NULL, NULL, 0, NULL }\n";
- pr "};\n";
- pr "\n";
-
- (* Init function. *)
- pr "\
-#if PY_MAJOR_VERSION >= 3
-static struct PyModuleDef moduledef = {
- PyModuleDef_HEAD_INIT,
- \"libhivexmod\", /* m_name */
- \"hivex module\", /* m_doc */
- -1, /* m_size */
- methods, /* m_methods */
- NULL, /* m_reload */
- NULL, /* m_traverse */
- NULL, /* m_clear */
- NULL, /* m_free */
-};
-#endif
-
-static PyObject *
-moduleinit (void)
-{
- PyObject *m;
-
-#if PY_MAJOR_VERSION >= 3
- m = PyModule_Create (&moduledef);
-#else
- m = Py_InitModule ((char *) \"libhivexmod\", methods);
-#endif
-
- return m; /* m might be NULL if module init failed */
-}
-
-#if PY_MAJOR_VERSION >= 3
-PyMODINIT_FUNC
-PyInit_libhivexmod (void)
-{
- return moduleinit ();
-}
-#else
-void
-initlibhivexmod (void)
-{
- (void) moduleinit ();
-}
-#endif
-"
-
-and generate_python_py () =
- generate_header HashStyle LGPLv2plus;
-
- pr "\
-\"\"\"Python bindings for hivex
-
-import hivex
-h = hivex.Hivex (filename)
-
-The hivex module provides Python bindings to the hivex API for
-examining and modifying Windows Registry 'hive' files.
-
-Read the hivex(3) man page to find out how to use the API.
-\"\"\"
-
-import libhivexmod
-
-class Hivex(object):
- \"\"\"Instances of this class are hivex API handles.\"\"\"
-
- def __init__ (self, filename";
-
- List.iter (
- fun (_, flag, _) -> pr ", %s = False" (String.lowercase flag)
- ) open_flags;
-
- pr "):
- \"\"\"Create a new hivex handle.\"\"\"
- flags = 0
-";
-
- List.iter (
- fun (n, flag, description) ->
- pr " # %s\n" description;
- pr " if %s: flags += %d\n" (String.lowercase flag) n
- ) open_flags;
-
- pr " self._o = libhivexmod.open (filename, flags)
-
- def __del__ (self):
- libhivexmod.close (self._o)
-
-";
-
- List.iter (
- fun (name, style, shortdesc, _) ->
- (* The close and open calls are handled specially above. *)
- if fst style <> RErrDispose && List.hd (snd style) = AHive then (
- let args = List.tl (snd style) in
- let args = List.filter (
- function AOpenFlags | AUnusedFlags -> false
- | _ -> true
- ) args in
-
- pr " def %s (self" name;
- List.iter (fun arg -> pr ", %s" (name_of_argt arg)) args;
- pr "):\n";
- pr " \"\"\"%s\"\"\"\n" shortdesc;
- pr " return libhivexmod.%s (self._o" name;
- List.iter (
- fun arg ->
- pr ", ";
- match arg with
- | AHive -> assert false
- | ANode n | AValue n
- | AString n | AStringNullable n -> pr "%s" n
- | AOpenFlags
- | AUnusedFlags -> assert false
- | ASetValues -> pr "values"
- | ASetValue -> pr "val"
- ) args;
- pr ")\n";
- pr "\n"
- )
- ) functions
-
-and generate_ruby_c () =
- generate_header CStyle LGPLv2plus;
-
- pr "\
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdint.h>
-
-#include <ruby.h>
-
-#include \"hivex.h\"
-
-#include \"extconf.h\"
-
-/* For Ruby < 1.9 */
-#ifndef RARRAY_LEN
-#define RARRAY_LEN(r) (RARRAY((r))->len)
-#endif
-
-#ifndef RSTRING_LEN
-#define RSTRING_LEN(r) (RSTRING((r))->len)
-#endif
-
-#ifndef RSTRING_PTR
-#define RSTRING_PTR(r) (RSTRING((r))->ptr)
-#endif
-
-static VALUE m_hivex; /* hivex module */
-static VALUE c_hivex; /* hive_h handle */
-static VALUE e_Error; /* used for all errors */
-
-static void
-ruby_hivex_free (void *hvp)
-{
- hive_h *h = hvp;
-
- if (h)
- hivex_close (h);
-}
-
-static void
-get_value (VALUE valv, hive_set_value *val)
-{
- VALUE key = rb_hash_lookup (valv, ID2SYM (rb_intern (\"key\")));
- VALUE type = rb_hash_lookup (valv, ID2SYM (rb_intern (\"type\")));
- VALUE value = rb_hash_lookup (valv, ID2SYM (rb_intern (\"value\")));
-
- val->key = StringValueCStr (key);
- val->t = NUM2ULL (type);
- val->len = RSTRING_LEN (value);
- val->value = RSTRING_PTR (value);
-}
-
-static hive_set_value *
-get_values (VALUE valuesv, size_t *nr_values)
-{
- size_t i;
- hive_set_value *ret;
-
- *nr_values = RARRAY_LEN (valuesv);
- ret = malloc (sizeof (*ret) * *nr_values);
- if (ret == NULL)
- abort ();
-
- for (i = 0; i < *nr_values; ++i) {
- VALUE v = rb_ary_entry (valuesv, i);
- get_value (v, &ret[i]);
- }
-
- return ret;
-}
-
-";
-
- List.iter (
- fun (name, (ret, args), shortdesc, longdesc) ->
- let () =
- (* Generate rdoc. *)
- let doc = replace_str longdesc "C<hivex_" "C<h." in
- let doc = pod2text ~width:60 name doc in
- let doc = String.concat "\n * " doc in
- let doc = trim doc in
-
- let call, args =
- match args with
- | AHive :: args -> "h." ^ name, args
- | args -> "Hivex::" ^ name, args in
- let args = filter_map (
- function
- | AUnusedFlags -> None
- | args -> Some (name_of_argt args)
- ) args in
- let args = String.concat ", " args in
-
- let ret =
- match ret with
- | RErr | RErrDispose -> "nil"
- | RHive -> "Hivex::Hivex"
- | RSize | RNode | RNodeNotFound -> "integer"
- | RNodeList -> "list"
- | RValue -> "integer"
- | RValueList -> "list"
- | RString -> "string"
- | RStringList -> "list"
- | RLenType -> "hash"
- | RLenValue -> "integer"
- | RLenTypeVal -> "hash"
- | RInt32 -> "integer"
- | RInt64 -> "integer" in
-
- pr "\
-/*
- * call-seq:
- * %s(%s) -> %s
- *
- * %s
- *
- * %s
- *
- * (For the C API documentation for this function, see
- * +hivex_%s+[http://libguestfs.org/hivex.3.html#hivex_%s]).
- */
-" call args ret shortdesc doc name name in
-
- (* Generate the function. *)
- pr "static VALUE\n";
- pr "ruby_hivex_%s (" name;
-
- let () =
- (* If the first argument is not AHive, then this is a module-level
- * function, and Ruby passes an implicit module argument which we
- * must ignore. Otherwise the first argument is the hive handle.
- *)
- let args =
- match args with
- | AHive :: args -> pr "VALUE hv"; args
- | args -> pr "VALUE modulev"; args in
- List.iter (
- function
- | AUnusedFlags -> ()
- | arg ->
- pr ", VALUE %sv" (name_of_argt arg)
- ) args;
- pr ")\n" in
-
- pr "{\n";
-
- List.iter (
- function
- | AHive ->
- pr " hive_h *h;\n";
- pr " Data_Get_Struct (hv, hive_h, h);\n";
- pr " if (!h)\n";
- pr " rb_raise (rb_eArgError, \"%%s: used handle after closing it\",\n";
- pr " \"%s\");\n" name;
- | ANode n ->
- pr " hive_node_h %s = NUM2ULL (%sv);\n" n n
- | AValue n ->
- pr " hive_value_h %s = NUM2ULL (%sv);\n" n n
- | AString n ->
- pr " const char *%s = StringValueCStr (%sv);\n" n n;
- | AStringNullable n ->
- pr " const char *%s =\n" n;
- pr " !NIL_P (%sv) ? StringValueCStr (%sv) : NULL;\n" n n
- | AOpenFlags ->
- pr " int flags = 0;\n";
- List.iter (
- fun (n, flag, _) ->
- pr " if (RTEST (rb_hash_lookup (flagsv, ID2SYM (rb_intern (\"%s\")))))\n"
- (String.lowercase flag);
- pr " flags += %d;\n" n
- ) open_flags
- | AUnusedFlags -> ()
- | ASetValues ->
- pr " size_t nr_values;\n";
- pr " hive_set_value *values;\n";
- pr " values = get_values (valuesv, &nr_values);\n"
- | ASetValue ->
- pr " hive_set_value val;\n";
- pr " get_value (valv, &val);\n"
- ) args;
- pr "\n";
-
- let error_code =
- match ret with
- | RErr -> pr " int r;\n"; "-1"
- | RErrDispose -> pr " int r;\n"; "-1"
- | RHive -> pr " hive_h *r;\n"; "NULL"
- | RSize -> pr " size_t r;\n"; "0"
- | RNode -> pr " hive_node_h r;\n"; "0"
- | RNodeNotFound ->
- pr " errno = 0;\n";
- pr " hive_node_h r;\n";
- "0 && errno != 0"
- | RNodeList -> pr " hive_node_h *r;\n"; "NULL"
- | RValue -> pr " hive_value_h r;\n"; "0"
- | RValueList -> pr " hive_value_h *r;\n"; "NULL"
- | RString -> pr " char *r;\n"; "NULL"
- | RStringList -> pr " char **r;\n"; "NULL"
- | RLenType ->
- pr " int r;\n";
- pr " size_t len;\n";
- pr " hive_type t;\n";
- "-1"
- | RLenValue ->
- pr " errno = 0;\n";
- pr " hive_value_h r;\n";
- pr " size_t len;\n";
- "0 && errno != 0"
- | RLenTypeVal ->
- pr " char *r;\n";
- pr " size_t len;\n";
- pr " hive_type t;\n";
- "NULL"
- | RInt32 ->
- pr " errno = 0;\n";
- pr " int32_t r;\n";
- "-1 && errno != 0"
- | RInt64 ->
- pr " errno = 0;\n";
- pr " int64_t r;\n";
- "-1 && errno != 0" in
- pr "\n";
-
- let c_params =
- List.map (function
- | ASetValues -> ["nr_values"; "values"]
- | ASetValue -> ["&val"]
- | AUnusedFlags -> ["0"]
- | arg -> [name_of_argt arg]) args in
- let c_params =
- match ret with
- | RLenType | RLenTypeVal -> c_params @ [["&t"; "&len"]]
- | RLenValue -> c_params @ [["&len"]]
- | _ -> c_params in
- let c_params = List.concat c_params in
-
- pr " r = hivex_%s (%s" name (List.hd c_params);
- List.iter (pr ", %s") (List.tl c_params);
- pr ");\n";
- pr "\n";
-
- (* Dispose of the hive handle (even if hivex_close returns error). *)
- (match ret with
- | RErrDispose ->
- pr " /* So we don't double-free in the finalizer. */\n";
- pr " DATA_PTR (hv) = NULL;\n";
- pr "\n";
- | _ -> ()
- );
-
- List.iter (
- function
- | AHive
- | ANode _
- | AValue _
- | AString _
- | AStringNullable _
- | AOpenFlags
- | AUnusedFlags -> ()
- | ASetValues ->
- pr " free (values);\n"
- | ASetValue -> ()
- ) args;
-
- (* Check for errors from C library. *)
- pr " if (r == %s)\n" error_code;
- pr " rb_raise (e_Error, \"%%s\", strerror (errno));\n";
- pr "\n";
-
- (match ret with
- | RErr | RErrDispose ->
- pr " return Qnil;\n"
- | RHive ->
- pr " return Data_Wrap_Struct (c_hivex, NULL, ruby_hivex_free, r);\n"
- | RSize
- | RNode
- | RValue
- | RInt64 ->
- pr " return ULL2NUM (r);\n"
- | RInt32 ->
- pr " return INT2NUM (r);\n"
- | RNodeNotFound ->
- pr " if (r)\n";
- pr " return ULL2NUM (r);\n";
- pr " else\n";
- pr " return Qnil;\n"
- | RNodeList
- | RValueList ->
- pr " size_t i, len = 0;\n";
- pr " for (i = 0; r[i] != 0; ++i) len++;\n";
- pr " VALUE rv = rb_ary_new2 (len);\n";
- pr " for (i = 0; r[i] != 0; ++i)\n";
- pr " rb_ary_push (rv, ULL2NUM (r[i]));\n";
- pr " free (r);\n";
- pr " return rv;\n"
- | RString ->
- pr " VALUE rv = rb_str_new2 (r);\n";
- pr " free (r);\n";
- pr " return rv;\n"
- | RStringList ->
- pr " size_t i, len = 0;\n";
- pr " for (i = 0; r[i] != NULL; ++i) len++;\n";
- pr " VALUE rv = rb_ary_new2 (len);\n";
- pr " for (i = 0; r[i] != NULL; ++i) {\n";
- pr " rb_ary_push (rv, rb_str_new2 (r[i]));\n";
- pr " free (r[i]);\n";
- pr " }\n";
- pr " free (r);\n";
- pr " return rv;\n"
- | RLenType ->
- pr " VALUE rv = rb_hash_new ();\n";
- pr " rb_hash_aset (rv, ID2SYM (rb_intern (\"len\")), INT2NUM (len));\n";
- pr " rb_hash_aset (rv, ID2SYM (rb_intern (\"type\")), INT2NUM (t));\n";
- pr " return rv;\n"
- | RLenValue ->
- pr " VALUE rv = rb_hash_new ();\n";
- pr " rb_hash_aset (rv, ID2SYM (rb_intern (\"len\")), INT2NUM (len));\n";
- pr " rb_hash_aset (rv, ID2SYM (rb_intern (\"off\")), ULL2NUM (r));\n";
- pr " return rv;\n"
- | RLenTypeVal ->
- pr " VALUE rv = rb_hash_new ();\n";
- pr " rb_hash_aset (rv, ID2SYM (rb_intern (\"len\")), INT2NUM (len));\n";
- pr " rb_hash_aset (rv, ID2SYM (rb_intern (\"type\")), INT2NUM (t));\n";
- pr " rb_hash_aset (rv, ID2SYM (rb_intern (\"value\")), rb_str_new (r, len));\n";
- pr " free (r);\n";
- pr " return rv;\n"
- );
-
- pr "}\n";
- pr "\n"
- ) functions;
-
- pr "\
-/* Initialize the module. */
-void Init__hivex ()
-{
- m_hivex = rb_define_module (\"Hivex\");
- c_hivex = rb_define_class_under (m_hivex, \"Hivex\", rb_cObject);
- e_Error = rb_define_class_under (m_hivex, \"Error\", rb_eStandardError);
-
- /* XXX How to pass arguments? */
-#if 0
-#ifdef HAVE_RB_DEFINE_ALLOC_FUNC
- rb_define_alloc_func (c_hivex, ruby_hivex_open);
-#endif
-#endif
-
-";
-
- (* Methods. *)
- List.iter (
- fun (name, (_, args), _, _) ->
- let args = List.filter (
- function
- | AUnusedFlags -> false
- | _ -> true
- ) args in
- let nr_args = List.length args in
- match args with
- | AHive :: _ ->
- pr " rb_define_method (c_hivex, \"%s\",\n" name;
- pr " ruby_hivex_%s, %d);\n" name (nr_args-1)
- | args -> (* class function *)
- pr " rb_define_module_function (m_hivex, \"%s\",\n" name;
- pr " ruby_hivex_%s, %d);\n" name nr_args
- ) functions;
-
- pr "}\n"
-
-let output_to filename k =
- let filename_new = filename ^ ".new" in
- chan := open_out filename_new;
- k ();
- close_out !chan;
- chan := Pervasives.stdout;
-
- (* Is the new file different from the current file? *)
- if Sys.file_exists filename && files_equal filename filename_new then
- unlink filename_new (* same, so skip it *)
- else (
- (* different, overwrite old one *)
- (try chmod filename 0o644 with Unix_error _ -> ());
- rename filename_new filename;
- chmod filename 0o444;
- printf "written %s\n%!" filename;
- )
-
-let perror msg = function
- | Unix_error (err, _, _) ->
- eprintf "%s: %s\n" msg (error_message err)
- | exn ->
- eprintf "%s: %s\n" msg (Printexc.to_string exn)
-
-(* Main program. *)
-let () =
- let lock_fd =
- try openfile "configure.ac" [O_RDWR] 0
- with
- | Unix_error (ENOENT, _, _) ->
- eprintf "\
-You are probably running this from the wrong directory.
-Run it from the top source directory using the command
- generator/generator.ml
-";
- exit 1
- | exn ->
- perror "open: configure.ac" exn;
- exit 1 in
-
- (* Acquire a lock so parallel builds won't try to run the generator
- * twice at the same time. Subsequent builds will wait for the first
- * one to finish. Note the lock is released implicitly when the
- * program exits.
- *)
- (try lockf lock_fd F_LOCK 1
- with exn ->
- perror "lock: configure.ac" exn;
- exit 1);
-
- check_functions ();
-
- output_to "lib/hivex.h" generate_c_header;
- output_to "lib/hivex.pod" generate_c_pod;
-
- output_to "lib/hivex.syms" generate_linker_script;
-
- output_to "ocaml/hivex.mli" generate_ocaml_interface;
- output_to "ocaml/hivex.ml" generate_ocaml_implementation;
- output_to "ocaml/hivex_c.c" generate_ocaml_c;
-
- output_to "perl/lib/Win/Hivex.pm" generate_perl_pm;
- output_to "perl/Hivex.xs" generate_perl_xs;
-
- output_to "python/hivex.py" generate_python_py;
- output_to "python/hivex-py.c" generate_python_c;
-
- output_to "ruby/ext/hivex/_hivex.c" generate_ruby_c;
-
- (* Always generate this file last, and unconditionally. It's used
- * by the Makefile to know when we must re-run the generator.
- *)
- let chan = open_out "generator/stamp-generator" in
- fprintf chan "1\n";
- close_out chan;
-
- printf "generated %d lines of code\n" !lines
diff --git a/trunk/hivex/hivex.pc.in b/trunk/hivex/hivex.pc.in
deleted file mode 100644
index c5f594a..0000000
--- a/trunk/hivex/hivex.pc.in
+++ /dev/null
@@ -1,11 +0,0 @@
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: hivex
-Version: @VERSION@
-Description: Read and write Windows Registry Hive files.
-Requires:
-Cflags:
-Libs: -lhivex @LIBS@
diff --git a/trunk/hivex/html/pod.css b/trunk/hivex/html/pod.css
deleted file mode 100644
index 9a0b4b5..0000000
--- a/trunk/hivex/html/pod.css
+++ /dev/null
@@ -1,24 +0,0 @@
-/* CSS to make pod2html files look a little bit better. */
-@import url("http://et.redhat.com/~rjones/css/standard.css");
-
-/* Put the index on the right hand side in a floating box. */
-div[name="index"] {
- float: right;
- width: 24em;
- background-color: white;
- margin-right: 2em;
-}
-
-/* Get rid of those horrible <hr>'s :-( */
-hr { display: none; }
-
-/* Demote <h1>'s. */
-h1 {
- font-size: 100%;
- border-bottom: none;
-}
-
-h2 {
- font-size: 120%;
- border-bottom: none;
-}
diff --git a/trunk/hivex/images/Makefile.am b/trunk/hivex/images/Makefile.am
deleted file mode 100644
index b0087f3..0000000
--- a/trunk/hivex/images/Makefile.am
+++ /dev/null
@@ -1,40 +0,0 @@
-# hivex
-# Copyright (C) 2009-2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# Old RHEL 5 autoconf doesn't have builddir.
-builddir ?= $(top_builddir)/images
-
-EXTRA_DIST = minimal rlenvalue_test_hive
-
-# 'large' is a large hive used for testing purposes. It is generated
-# by the mklarge C program, to avoid having to distribute this large
-# binary blob.
-noinst_PROGRAMS = mklarge
-mklarge_SOURCES = mklarge.c
-mklarge_CFLAGS = \
- -I$(srcdir)/../lib \
- $(WARN_CFLAGS) $(WERROR_CFLAGS)
-mklarge_LDADD = ../lib/libhivex.la
-
-noinst_DATA = large
-
-large: minimal mklarge
- cmp -s $(srcdir)/minimal $(builddir)/minimal || \
- cp $(srcdir)/minimal $(builddir)/minimal
- ./mklarge $(builddir)/minimal $(builddir)/large
-
-CLEANFILES = $(noinst_DATA)
diff --git a/trunk/hivex/images/README b/trunk/hivex/images/README
deleted file mode 100644
index 2131885..0000000
--- a/trunk/hivex/images/README
+++ /dev/null
@@ -1,13 +0,0 @@
-This directory contains test images for the hivex library.
-
-'minimal' is a valid registry containing a single root nk (with
-associated sk) which was created by chopping out everything possible
-from a Windows 2003 software hive and then doing lots of hand edits on
-the result. There is no "source" for it as such, it is just a
-hand-crafted binary blob.
-
-'large' is a procedurally generated, large hive. The program
-'mklarge.c' is used to make this during the build. It is used during
-tests.
-
-- Richard W.M. Jones 2010-02-24.
diff --git a/trunk/hivex/images/minimal b/trunk/hivex/images/minimal
deleted file mode 100755
index 3f4ee58..0000000
Binary files a/trunk/hivex/images/minimal and /dev/null differ
diff --git a/trunk/hivex/images/mklarge.c b/trunk/hivex/images/mklarge.c
deleted file mode 100644
index c818df8..0000000
--- a/trunk/hivex/images/mklarge.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/* mklarge - Make a large hive for testing purposes.
- * Copyright (C) 2010 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <config.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include <hivex.h>
-
-static int degrees[] = { 3, 1, 4, 1, 5, 9, 2 }; /* ~1000 nodes */
-static const int nr_degrees = sizeof degrees / sizeof degrees[0];
-static const char *strings[][10] = {
- { "The", "A", "Another" }, /* level 0 */
- { "giant" },
- { "mongoose", "goat", "zebra", "elephant" },
- { "was" },
- { "found in", "seen in", "spotted over", "sent to", "fired at" },
- { "Paris", "London", "Rome", "Oslo", "Madrid", "Nicosia", "Amsterdam",
- "Moscow", "Riga" },
- { "today", "yesterday" } /* level 6 */
-};
-static hive_set_value values[] = {
- /* char* casts are needed to work around a stupidity of C */
- { (char *) "A", hive_t_REG_SZ, 4, (char *) "a\0\0\0" },
- { (char *) "B", hive_t_REG_DWORD, 4, (char *) "\x78\x56\x34\x12" },
- { (char *) "C", hive_t_REG_EXPAND_SZ, 6, (char *) "c\0c\0\0\0" },
- { (char *) "D", hive_t_REG_SZ, 8, (char *) "d\0d\0d\0\0\0" },
- { (char *) "E", hive_t_REG_QWORD, 8, (char *) "\xf0\xde\xbc\x9a\x78\x56\x34\x12" },
- { (char *) "F", hive_t_REG_SZ, 4, (char *) "f\0\0\0" },
- { (char *) "G", hive_t_REG_EXPAND_SZ, 4, (char *) "g\0\0\0" }
-};
-
-static void
-iter (hive_h *h, int depth, int posn, hive_node_h parent, char *name)
-{
- if (depth < nr_degrees) {
- int degree = degrees[depth];
- int i, len;
- hive_node_h node;
-
- len = strlen (name);
- if (len > 0) name[len++] = ' ';
-
- for (i = 0; i < degree; ++i) {
- strcpy (&name[len], strings[depth][i]);
- node = hivex_node_add_child (h, parent, name);
- if (node == 0) {
- perror ("mklarge: hivex_node_add_child");
- exit (1);
- }
- iter (h, depth+1, i, node, name);
- }
-
- if (hivex_node_set_values (h, parent, depth, values, 0) == -1) {
- perror ("mklarge: hivex_node_set_values");
- exit (1);
- }
- }
-}
-
-int
-main (int argc, char *argv[])
-{
- hive_h *h;
- char name[4096] = { '\0' };
-
- h = hivex_open (argv[1], HIVEX_OPEN_WRITE);
- if (h == NULL) {
- perror (argv[1]);
- exit (1);
- }
-
- iter (h, 0, 0, hivex_root (h), name);
-
- if (hivex_commit (h, argv[2], 0) == -1) {
- perror (argv[2]);
- exit (1);
- }
-
- if (hivex_close (h) == -1) {
- perror ("mklarge: close");
- exit (1);
- }
-
- exit (0);
-}
diff --git a/trunk/hivex/images/mkrlenvalue_test_hive.py b/trunk/hivex/images/mkrlenvalue_test_hive.py
deleted file mode 100755
index 827667e..0000000
--- a/trunk/hivex/images/mkrlenvalue_test_hive.py
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/usr/bin/env python
-import os
-import hivex
-
-srcdir = os.environ.get("srcdir")
-if not srcdir:
- srcdir = "."
-
-h = hivex.Hivex ("%s/../images/minimal" % srcdir,
- write = True)
-assert h
-
-root = h.root ()
-assert root
-
-h.node_add_child (root, "ModerateValueParent")
-
-mvp = h.node_get_child (root, "ModerateValueParent")
-assert mvp
-
-moderate_value = "0123456789ABCDEF"
-
-values = [
- { "key": "3Bytes", "t": 3, "value": moderate_value[:3] },
- { "key": "16Bytes", "t": 3, "value": moderate_value },
- { "key": "30Bytes", "t": 3, "value": (moderate_value*2)[:30] },
- { "key": "31Bytes", "t": 3, "value": (moderate_value*2)[:31] },
- { "key": "32Bytes", "t": 3, "value": moderate_value*2 },
- { "key": "33Bytes", "t": 3, "value": (moderate_value*3)[:33] },
-]
-h.node_set_values (mvp, values)
-
-new_moderate_value = h.node_get_value (mvp, "16Bytes")
-
-assert h.value_value (new_moderate_value)[1] == moderate_value
-
-h.commit ("%s/../images/rlenvalue_test_hive" % srcdir)
diff --git a/trunk/hivex/images/rlenvalue_test_hive b/trunk/hivex/images/rlenvalue_test_hive
deleted file mode 100644
index 87cbec5..0000000
Binary files a/trunk/hivex/images/rlenvalue_test_hive and /dev/null differ
diff --git a/trunk/hivex/lib/Makefile.am b/trunk/hivex/lib/Makefile.am
deleted file mode 100644
index 8d7ff69..0000000
--- a/trunk/hivex/lib/Makefile.am
+++ /dev/null
@@ -1,84 +0,0 @@
-# hivex
-# Copyright (C) 2009-2011 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-SUBDIRS = tools
-
-EXTRA_DIST = \
- hivex.pod \
- hivex.syms
-
-lib_LTLIBRARIES = libhivex.la
-
-libhivex_la_SOURCES = \
- hivex.c \
- hivex.h \
- hivex-internal.h \
- byte_conversions.h \
- gettext.h \
- mmap.h \
- hivex.syms
-
-libhivex_la_LIBADD = ../gnulib/lib/libgnu.la $(LTLIBOBJS)
-libhivex_la_LDFLAGS = \
- -version-info 0:0:0 \
- $(VERSION_SCRIPT_FLAGS)$(srcdir)/hivex.syms \
- $(LTLIBICONV) \
- $(LTLIBINTL) \
- $(LTLIBTHREAD)
-libhivex_la_CFLAGS = $(WARN_CFLAGS) $(WERROR_CFLAGS)
-libhivex_la_CPPFLAGS = \
- -I$(top_srcdir)/gnulib/lib \
- -I$(top_builddir)/gnulib/lib \
- -I$(srcdir)
-
-include_HEADERS = hivex.h
-
-man_MANS = hivex.3
-
-hivex.3: hivex.pod
- $(POD2MAN) \
- --section 3 \
- -c "Windows Registry" \
- --name "hivex" \
- --release "$(PACKAGE_NAME)-$(PACKAGE_VERSION)" \
- $< > $@-t; mv $@-t $@
-
-noinst_DATA = \
- $(top_builddir)/html/hivex.3.html
-
-$(top_builddir)/html/hivex.3.html: hivex.pod
- mkdir -p $(top_builddir)/html
- pod2html \
- --css pod.css \
- --htmldir $(top_builddir)/html \
- --outfile $(top_builddir)/html/hivex.3.html \
- $<
-
-CLEANFILES = $(man_MANS)
-
-# Tests.
-
-check_PROGRAMS = test-just-header
-
-TESTS = test-just-header
-
-test_just_header_SOURCES = test-just-header.c
-test_just_header_CFLAGS = \
- -I$(top_srcdir)/lib -I$(top_builddir)/lib \
- $(WARN_CFLAGS) $(WERROR_CFLAGS)
-test_just_header_LDADD = \
- $(top_builddir)/lib/libhivex.la
diff --git a/trunk/hivex/lib/byte_conversions.h b/trunk/hivex/lib/byte_conversions.h
deleted file mode 100644
index 2e4cafe..0000000
--- a/trunk/hivex/lib/byte_conversions.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* Useful byte conversion macros, not available on all platforms.
- * Copyright (C) 2009-2010 Red Hat Inc.
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation;
- * version 2.1 of the License.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- */
-
-#ifndef hivex_byteorder_h
-#define hivex_byteorder_h
-
-#ifdef HAVE_ENDIAN_H
-#include <endian.h>
-#endif
-#include <byteswap.h>
-
-#if __BYTE_ORDER == __LITTLE_ENDIAN
-#ifndef be32toh
-#define be32toh(x) bswap_32 (x)
-#endif
-#ifndef htobe32
-#define htobe32(x) bswap_32 (x)
-#endif
-#ifndef be64toh
-#define be64toh(x) bswap_64 (x)
-#endif
-#ifndef htobe64
-#define htobe64(x) bswap_64 (x)
-#endif
-#ifndef le16toh
-#define le16toh(x) (x)
-#endif
-#ifndef htole16
-#define htole16(x) (x)
-#endif
-#ifndef le32toh
-#define le32toh(x) (x)
-#endif
-#ifndef htole32
-#define htole32(x) (x)
-#endif
-#ifndef le64toh
-#define le64toh(x) (x)
-#endif
-#ifndef htole64
-#define htole64(x) (x)
-#endif
-#else /* __BYTE_ORDER == __BIG_ENDIAN */
-#ifndef be32toh
-#define be32toh(x) (x)
-#endif
-#ifndef htobe32
-#define htobe32(x) (x)
-#endif
-#ifndef be64toh
-#define be64toh(x) (x)
-#endif
-#ifndef htobe64
-#define htobe64(x) (x)
-#endif
-#ifndef le16toh
-#define le16toh(x) bswap_16 (x)
-#endif
-#ifndef htole16
-#define htole16(x) bswap_16 (x)
-#endif
-#ifndef le32toh
-#define le32toh(x) bswap_32 (x)
-#endif
-#ifndef htole32
-#define htole32(x) bswap_32 (x)
-#endif
-#ifndef le64toh
-#define le64toh(x) bswap_64 (x)
-#endif
-#ifndef htole64
-#define htole64(x) bswap_64 (x)
-#endif
-#endif /* __BYTE_ORDER == __BIG_ENDIAN */
-
-#endif /* hivex_byteorder_h */
diff --git a/trunk/hivex/lib/gettext.h b/trunk/hivex/lib/gettext.h
deleted file mode 100644
index 93f32e5..0000000
--- a/trunk/hivex/lib/gettext.h
+++ /dev/null
@@ -1,271 +0,0 @@
-/* Convenience header for conditional use of GNU <libintl.h>.
- Copyright (C) 1995-1998, 2000-2002, 2004-2006 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published
- by the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Library General Public License for more details.
-
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
- USA. */
-
-#ifndef _LIBGETTEXT_H
-#define _LIBGETTEXT_H 1
-
-/* NLS can be disabled through the configure --disable-nls option. */
-#if ENABLE_NLS
-
-/* Get declarations of GNU message catalog functions. */
-# include <libintl.h>
-
-/* You can set the DEFAULT_TEXT_DOMAIN macro to specify the domain used by
- the gettext() and ngettext() macros. This is an alternative to calling
- textdomain(), and is useful for libraries. */
-# ifdef DEFAULT_TEXT_DOMAIN
-# undef gettext
-# define gettext(Msgid) \
- dgettext (DEFAULT_TEXT_DOMAIN, Msgid)
-# undef ngettext
-# define ngettext(Msgid1, Msgid2, N) \
- dngettext (DEFAULT_TEXT_DOMAIN, Msgid1, Msgid2, N)
-# endif
-
-#else
-
-/* Solaris /usr/include/locale.h includes /usr/include/libintl.h, which
- chokes if dcgettext is defined as a macro. So include it now, to make
- later inclusions of <locale.h> a NOP. We don't include <libintl.h>
- as well because people using "gettext.h" will not include <libintl.h>,
- and also including <libintl.h> would fail on SunOS 4, whereas <locale.h>
- is OK. */
-#if defined(__sun)
-# include <locale.h>
-#endif
-
-/* Many header files from the libstdc++ coming with g++ 3.3 or newer include
- <libintl.h>, which chokes if dcgettext is defined as a macro. So include
- it now, to make later inclusions of <libintl.h> a NOP. */
-#if defined(__cplusplus) && defined(__GNUG__) && (__GNUC__ >= 3)
-# include <cstdlib>
-# if (__GLIBC__ >= 2) || _GLIBCXX_HAVE_LIBINTL_H
-# include <libintl.h>
-# endif
-#endif
-
-/* Disabled NLS.
- The casts to 'const char *' serve the purpose of producing warnings
- for invalid uses of the value returned from these functions.
- On pre-ANSI systems without 'const', the config.h file is supposed to
- contain "#define const". */
-# define gettext(Msgid) ((const char *) (Msgid))
-# define dgettext(Domainname, Msgid) ((void) (Domainname), gettext (Msgid))
-# define dcgettext(Domainname, Msgid, Category) \
- ((void) (Category), dgettext (Domainname, Msgid))
-# define ngettext(Msgid1, Msgid2, N) \
- ((N) == 1 \
- ? ((void) (Msgid2), (const char *) (Msgid1)) \
- : ((void) (Msgid1), (const char *) (Msgid2)))
-# define dngettext(Domainname, Msgid1, Msgid2, N) \
- ((void) (Domainname), ngettext (Msgid1, Msgid2, N))
-# define dcngettext(Domainname, Msgid1, Msgid2, N, Category) \
- ((void) (Category), dngettext(Domainname, Msgid1, Msgid2, N))
-# define textdomain(Domainname) ((const char *) (Domainname))
-# define bindtextdomain(Domainname, Dirname) \
- ((void) (Domainname), (const char *) (Dirname))
-# define bind_textdomain_codeset(Domainname, Codeset) \
- ((void) (Domainname), (const char *) (Codeset))
-
-#endif
-
-/* A pseudo function call that serves as a marker for the automated
- extraction of messages, but does not call gettext(). The run-time
- translation is done at a different place in the code.
- The argument, String, should be a literal string. Concatenated strings
- and other string expressions won't work.
- The macro's expansion is not parenthesized, so that it is suitable as
- initializer for static 'char[]' or 'const char[]' variables. */
-#define gettext_noop(String) String
-
-/* The separator between msgctxt and msgid in a .mo file. */
-#define GETTEXT_CONTEXT_GLUE "\004"
-
-/* Pseudo function calls, taking a MSGCTXT and a MSGID instead of just a
- MSGID. MSGCTXT and MSGID must be string literals. MSGCTXT should be
- short and rarely need to change.
- The letter 'p' stands for 'particular' or 'special'. */
-#ifdef DEFAULT_TEXT_DOMAIN
-# define pgettext(Msgctxt, Msgid) \
- pgettext_aux (DEFAULT_TEXT_DOMAIN, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, LC_MESSAGES)
-#else
-# define pgettext(Msgctxt, Msgid) \
- pgettext_aux (NULL, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, LC_MESSAGES)
-#endif
-#define dpgettext(Domainname, Msgctxt, Msgid) \
- pgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, LC_MESSAGES)
-#define dcpgettext(Domainname, Msgctxt, Msgid, Category) \
- pgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, Category)
-#ifdef DEFAULT_TEXT_DOMAIN
-# define npgettext(Msgctxt, Msgid, MsgidPlural, N) \
- npgettext_aux (DEFAULT_TEXT_DOMAIN, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, LC_MESSAGES)
-#else
-# define npgettext(Msgctxt, Msgid, MsgidPlural, N) \
- npgettext_aux (NULL, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, LC_MESSAGES)
-#endif
-#define dnpgettext(Domainname, Msgctxt, Msgid, MsgidPlural, N) \
- npgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, LC_MESSAGES)
-#define dcnpgettext(Domainname, Msgctxt, Msgid, MsgidPlural, N, Category) \
- npgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, Category)
-
-#ifdef __GNUC__
-__inline
-#else
-#ifdef __cplusplus
-inline
-#endif
-#endif
-static const char *
-pgettext_aux (const char *domain,
- const char *msg_ctxt_id, const char *msgid,
- int category)
-{
- const char *translation = dcgettext (domain, msg_ctxt_id, category);
- if (translation == msg_ctxt_id)
- return msgid;
- else
- return translation;
-}
-
-#ifdef __GNUC__
-__inline
-#else
-#ifdef __cplusplus
-inline
-#endif
-#endif
-static const char *
-npgettext_aux (const char *domain,
- const char *msg_ctxt_id, const char *msgid,
- const char *msgid_plural, unsigned long int n,
- int category)
-{
- const char *translation =
- dcngettext (domain, msg_ctxt_id, msgid_plural, n, category);
- if (translation == msg_ctxt_id || translation == msgid_plural)
- return (n == 1 ? msgid : msgid_plural);
- else
- return translation;
-}
-
-/* The same thing extended for non-constant arguments. Here MSGCTXT and MSGID
- can be arbitrary expressions. But for string literals these macros are
- less efficient than those above. */
-
-#include <string.h>
-
-#define _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS \
- (((__GNUC__ >= 3 || __GNUG__ >= 2) && !__STRICT_ANSI__) \
- /* || __STDC_VERSION__ >= 199901L */ )
-
-#if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS
-#include <stdlib.h>
-#endif
-
-#define pgettext_expr(Msgctxt, Msgid) \
- dcpgettext_expr (NULL, Msgctxt, Msgid, LC_MESSAGES)
-#define dpgettext_expr(Domainname, Msgctxt, Msgid) \
- dcpgettext_expr (Domainname, Msgctxt, Msgid, LC_MESSAGES)
-
-#ifdef __GNUC__
-__inline
-#else
-#ifdef __cplusplus
-inline
-#endif
-#endif
-static const char *
-dcpgettext_expr (const char *domain,
- const char *msgctxt, const char *msgid,
- int category)
-{
- size_t msgctxt_len = strlen (msgctxt) + 1;
- size_t msgid_len = strlen (msgid) + 1;
- const char *translation;
-#if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS
- char msg_ctxt_id[msgctxt_len + msgid_len];
-#else
- char buf[1024];
- char *msg_ctxt_id =
- (msgctxt_len + msgid_len <= sizeof (buf)
- ? buf
- : (char *) malloc (msgctxt_len + msgid_len));
- if (msg_ctxt_id != NULL)
-#endif
- {
- memcpy (msg_ctxt_id, msgctxt, msgctxt_len - 1);
- msg_ctxt_id[msgctxt_len - 1] = '\004';
- memcpy (msg_ctxt_id + msgctxt_len, msgid, msgid_len);
- translation = dcgettext (domain, msg_ctxt_id, category);
-#if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS
- if (msg_ctxt_id != buf)
- free (msg_ctxt_id);
-#endif
- if (translation != msg_ctxt_id)
- return translation;
- }
- return msgid;
-}
-
-#define npgettext_expr(Msgctxt, Msgid, MsgidPlural, N) \
- dcnpgettext_expr (NULL, Msgctxt, Msgid, MsgidPlural, N, LC_MESSAGES)
-#define dnpgettext_expr(Domainname, Msgctxt, Msgid, MsgidPlural, N) \
- dcnpgettext_expr (Domainname, Msgctxt, Msgid, MsgidPlural, N, LC_MESSAGES)
-
-#ifdef __GNUC__
-__inline
-#else
-#ifdef __cplusplus
-inline
-#endif
-#endif
-static const char *
-dcnpgettext_expr (const char *domain,
- const char *msgctxt, const char *msgid,
- const char *msgid_plural, unsigned long int n,
- int category)
-{
- size_t msgctxt_len = strlen (msgctxt) + 1;
- size_t msgid_len = strlen (msgid) + 1;
- const char *translation;
-#if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS
- char msg_ctxt_id[msgctxt_len + msgid_len];
-#else
- char buf[1024];
- char *msg_ctxt_id =
- (msgctxt_len + msgid_len <= sizeof (buf)
- ? buf
- : (char *) malloc (msgctxt_len + msgid_len));
- if (msg_ctxt_id != NULL)
-#endif
- {
- memcpy (msg_ctxt_id, msgctxt, msgctxt_len - 1);
- msg_ctxt_id[msgctxt_len - 1] = '\004';
- memcpy (msg_ctxt_id + msgctxt_len, msgid, msgid_len);
- translation = dcngettext (domain, msg_ctxt_id, msgid_plural, n, category);
-#if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS
- if (msg_ctxt_id != buf)
- free (msg_ctxt_id);
-#endif
- if (!(translation == msg_ctxt_id || translation == msgid_plural))
- return translation;
- }
- return (n == 1 ? msgid : msgid_plural);
-}
-
-#endif /* _LIBGETTEXT_H */
diff --git a/trunk/hivex/lib/hivex-internal.h b/trunk/hivex/lib/hivex-internal.h
deleted file mode 100644
index b053850..0000000
--- a/trunk/hivex/lib/hivex-internal.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* hivex internal header
- * Copyright (C) 2009-2011 Red Hat Inc.
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation;
- * version 2.1 of the License only.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef HIVEX_INTERNAL_H_
-#define HIVEX_INTERNAL_H_
-
-#include <stddef.h>
-
-struct hive_h {
- char *filename;
- int fd;
- size_t size;
- int msglvl;
- int writable;
-
- /* Registry file, memory mapped if read-only, or malloc'd if writing. */
- union {
- void *addr;
- struct ntreg_header *hdr;
- };
-
- /* Use a bitmap to store which file offsets are valid (point to a
- * used block). We only need to store 1 bit per 32 bits of the file
- * (because blocks are 4-byte aligned). We found that the average
- * block size in a registry file is ~50 bytes. So roughly 1 in 12
- * bits in the bitmap will be set, making it likely a more efficient
- * structure than a hash table.
- */
- char *bitmap;
-#define BITMAP_SET(bitmap,off) (bitmap[(off)>>5] |= 1 << (((off)>>2)&7))
-#define BITMAP_CLR(bitmap,off) (bitmap[(off)>>5] &= ~ (1 << (((off)>>2)&7)))
-#define BITMAP_TST(bitmap,off) (bitmap[(off)>>5] & (1 << (((off)>>2)&7)))
-#define IS_VALID_BLOCK(h,off) \
- (((off) & 3) == 0 && \
- (off) >= 0x1000 && \
- (off) < (h)->size && \
- BITMAP_TST((h)->bitmap,(off)))
-
- /* Fields from the header, extracted from little-endianness hell. */
- size_t rootoffs; /* Root key offset (always an nk-block). */
- size_t endpages; /* Offset of end of pages. */
- int64_t last_modified; /* mtime of base block. */
-
- /* For writing. */
- size_t endblocks; /* Offset to next block allocation (0
- if not allocated anything yet). */
-
-#ifndef HAVE_MMAP
- /* Internal data for mmap replacement */
- void *p_winmap;
-#endif
-};
-
-#define STREQ(a,b) (strcmp((a),(b)) == 0)
-#define STRCASEEQ(a,b) (strcasecmp((a),(b)) == 0)
-#define STRNEQ(a,b) (strcmp((a),(b)) != 0)
-#define STRCASENEQ(a,b) (strcasecmp((a),(b)) != 0)
-#define STREQLEN(a,b,n) (strncmp((a),(b),(n)) == 0)
-#define STRCASEEQLEN(a,b,n) (strncasecmp((a),(b),(n)) == 0)
-#define STRNEQLEN(a,b,n) (strncmp((a),(b),(n)) != 0)
-#define STRCASENEQLEN(a,b,n) (strncasecmp((a),(b),(n)) != 0)
-#define STRPREFIX(a,b) (strncmp((a),(b),strlen((b))) == 0)
-
-#endif /* HIVEX_INTERNAL_H_ */
diff --git a/trunk/hivex/lib/hivex.c b/trunk/hivex/lib/hivex.c
deleted file mode 100644
index a2bd43b..0000000
--- a/trunk/hivex/lib/hivex.c
+++ /dev/null
@@ -1,2931 +0,0 @@
-/* hivex - Windows Registry "hive" extraction library.
- * Copyright (C) 2009-2011 Red Hat Inc.
- * Derived from code by Petter Nordahl-Hagen under a compatible license:
- * Copyright (c) 1997-2007 Petter Nordahl-Hagen.
- * Derived from code by Markus Stephany under a compatible license:
- * Copyright (c) 2000-2004, Markus Stephany.
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation;
- * version 2.1 of the License.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * See file LICENSE for the full license.
- */
-
-#include <config.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <stddef.h>
-#include <inttypes.h>
-#include <string.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <errno.h>
-#include <iconv.h>
-#include <sys/stat.h>
-#include <assert.h>
-
-#ifdef HAVE_MMAP
-#include <sys/mman.h>
-#else
-/* On systems without mmap (and munmap), use a replacement function. */
-#include "mmap.h"
-#endif
-
-#include "c-ctype.h"
-#include "full-read.h"
-#include "full-write.h"
-
-#include "hivex.h"
-#include "hivex-internal.h"
-#include "byte_conversions.h"
-
-/* These limits are in place to stop really stupid stuff and/or exploits. */
-#define HIVEX_MAX_SUBKEYS 15000
-#define HIVEX_MAX_VALUES 10000
-#define HIVEX_MAX_VALUE_LEN 1000000
-#define HIVEX_MAX_ALLOCATION 1000000
-
-static char *windows_utf16_to_utf8 (/* const */ char *input, size_t len);
-static size_t utf16_string_len_in_bytes_max (const char *str, size_t len);
-
-/* NB. All fields are little endian. */
-struct ntreg_header {
- char magic[4]; /* "regf" */
- uint32_t sequence1;
- uint32_t sequence2;
- int64_t last_modified;
- uint32_t major_ver; /* 1 */
- uint32_t minor_ver; /* 3 */
- uint32_t unknown5; /* 0 */
- uint32_t unknown6; /* 1 */
- uint32_t offset; /* offset of root key record - 4KB */
- uint32_t blocks; /* pointer AFTER last hbin in file - 4KB */
- uint32_t unknown7; /* 1 */
- /* 0x30 */
- char name[64]; /* original file name of hive */
- char unknown_guid1[16];
- char unknown_guid2[16];
- /* 0x90 */
- uint32_t unknown8;
- char unknown_guid3[16];
- uint32_t unknown9;
- /* 0xa8 */
- char unknown10[340];
- /* 0x1fc */
- uint32_t csum; /* checksum: xor of dwords 0-0x1fb. */
- /* 0x200 */
- char unknown11[3528];
- /* 0xfc8 */
- char unknown_guid4[16];
- char unknown_guid5[16];
- char unknown_guid6[16];
- uint32_t unknown12;
- uint32_t unknown13;
- /* 0x1000 */
-} __attribute__((__packed__));
-
-struct ntreg_hbin_page {
- char magic[4]; /* "hbin" */
- uint32_t offset_first; /* offset from 1st block */
- uint32_t page_size; /* size of this page (multiple of 4KB) */
- char unknown[20];
- /* Linked list of blocks follows here. */
-} __attribute__((__packed__));
-
-struct ntreg_hbin_block {
- int32_t seg_len; /* length of this block (-ve for used block) */
- char id[2]; /* the block type (eg. "nk" for nk record) */
- /* Block data follows here. */
-} __attribute__((__packed__));
-
-#define BLOCK_ID_EQ(h,offs,eqid) \
- (STREQLEN (((struct ntreg_hbin_block *)((h)->addr + (offs)))->id, (eqid), 2))
-
-static size_t
-block_len (hive_h *h, size_t blkoff, int *used)
-{
- struct ntreg_hbin_block *block;
- block = (struct ntreg_hbin_block *) ((char *) h->addr + blkoff);
-
- int32_t len = le32toh (block->seg_len);
- if (len < 0) {
- if (used) *used = 1;
- len = -len;
- } else {
- if (used) *used = 0;
- }
-
- return (size_t) len;
-}
-
-struct ntreg_nk_record {
- int32_t seg_len; /* length (always -ve because used) */
- char id[2]; /* "nk" */
- uint16_t flags;
- int64_t timestamp;
- uint32_t unknown1;
- uint32_t parent; /* offset of owner/parent */
- uint32_t nr_subkeys; /* number of subkeys */
- uint32_t nr_subkeys_volatile;
- uint32_t subkey_lf; /* lf record containing list of subkeys */
- uint32_t subkey_lf_volatile;
- uint32_t nr_values; /* number of values */
- uint32_t vallist; /* value-list record */
- uint32_t sk; /* offset of sk-record */
- uint32_t classname; /* offset of classname record */
- uint16_t max_subkey_name_len; /* maximum length of a subkey name in bytes
- if the subkey was reencoded as UTF-16LE */
- uint16_t unknown2;
- uint32_t unknown3;
- uint32_t max_vk_name_len; /* maximum length of any vk name in bytes
- if the name was reencoded as UTF-16LE */
- uint32_t max_vk_data_len; /* maximum length of any vk data in bytes */
- uint32_t unknown6;
- uint16_t name_len; /* length of name */
- uint16_t classname_len; /* length of classname */
- char name[1]; /* name follows here */
-} __attribute__((__packed__));
-
-struct ntreg_lf_record {
- int32_t seg_len;
- char id[2]; /* "lf"|"lh" */
- uint16_t nr_keys; /* number of keys in this record */
- struct {
- uint32_t offset; /* offset of nk-record for this subkey */
- char hash[4]; /* hash of subkey name */
- } keys[1];
-} __attribute__((__packed__));
-
-struct ntreg_ri_record {
- int32_t seg_len;
- char id[2]; /* "ri"|"li" */
- uint16_t nr_offsets; /* number of pointers to lf/lh/li records */
- uint32_t offset[1]; /* list of pointers to lf/lh/li records */
-} __attribute__((__packed__));
-
-/* This has no ID header. */
-struct ntreg_value_list {
- int32_t seg_len;
- uint32_t offset[1]; /* list of pointers to vk records */
-} __attribute__((__packed__));
-
-struct ntreg_vk_record {
- int32_t seg_len; /* length (always -ve because used) */
- char id[2]; /* "vk" */
- uint16_t name_len; /* length of name */
- /* length of the data:
- * If data_len is <= 4, then it's stored inline.
- * Top bit is set to indicate inline.
- */
- uint32_t data_len;
- uint32_t data_offset; /* pointer to the data (or data if inline) */
- uint32_t data_type; /* type of the data */
- uint16_t flags; /* bit 0 set => key name ASCII,
- bit 0 clr => key name UTF-16.
- Only seen ASCII here in the wild.
- NB: this is CLEAR for default key. */
- uint16_t unknown2;
- char name[1]; /* key name follows here */
-} __attribute__((__packed__));
-
-struct ntreg_sk_record {
- int32_t seg_len; /* length (always -ve because used) */
- char id[2]; /* "sk" */
- uint16_t unknown1;
- uint32_t sk_next; /* linked into a circular list */
- uint32_t sk_prev;
- uint32_t refcount; /* reference count */
- uint32_t sec_len; /* length of security info */
- char sec_desc[1]; /* security info follows */
-} __attribute__((__packed__));
-
-static uint32_t
-header_checksum (const hive_h *h)
-{
- uint32_t *daddr = (uint32_t *) h->addr;
- size_t i;
- uint32_t sum = 0;
-
- for (i = 0; i < 0x1fc / 4; ++i) {
- sum ^= le32toh (*daddr);
- daddr++;
- }
-
- return sum;
-}
-
-#define HIVEX_OPEN_MSGLVL_MASK (HIVEX_OPEN_VERBOSE|HIVEX_OPEN_DEBUG)
-
-hive_h *
-hivex_open (const char *filename, int flags)
-{
- hive_h *h = NULL;
-
- assert (sizeof (struct ntreg_header) == 0x1000);
- assert (offsetof (struct ntreg_header, csum) == 0x1fc);
-
- h = calloc (1, sizeof *h);
- if (h == NULL)
- goto error;
-
- h->msglvl = flags & HIVEX_OPEN_MSGLVL_MASK;
-
- const char *debug = getenv ("HIVEX_DEBUG");
- if (debug && STREQ (debug, "1"))
- h->msglvl = 2;
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_open: created handle %p\n", h);
-
- h->writable = !!(flags & HIVEX_OPEN_WRITE);
- h->filename = strdup (filename);
- if (h->filename == NULL)
- goto error;
-
-#ifdef O_CLOEXEC
- h->fd = open (filename, O_RDONLY | O_CLOEXEC);
-#else
- h->fd = open (filename, O_RDONLY);
-#endif
- if (h->fd == -1)
- goto error;
-#ifndef O_CLOEXEC
- fcntl (h->fd, F_SETFD, FD_CLOEXEC);
-#endif
-
- struct stat statbuf;
- if (fstat (h->fd, &statbuf) == -1)
- goto error;
-
- h->size = statbuf.st_size;
-
- if (!h->writable) {
- h->addr = mmap (NULL, h->size, PROT_READ, MAP_SHARED, h->fd, 0);
- if (h->addr == MAP_FAILED)
- goto error;
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_open: mapped file at %p\n", h->addr);
- } else {
- h->addr = malloc (h->size);
- if (h->addr == NULL)
- goto error;
-
- if (full_read (h->fd, h->addr, h->size) < h->size)
- goto error;
-
- /* We don't need the file descriptor along this path, since we
- * have read all the data.
- */
- if (close (h->fd) == -1)
- goto error;
- h->fd = -1;
- }
-
- /* Check header. */
- if (h->hdr->magic[0] != 'r' ||
- h->hdr->magic[1] != 'e' ||
- h->hdr->magic[2] != 'g' ||
- h->hdr->magic[3] != 'f') {
- fprintf (stderr, "hivex: %s: not a Windows NT Registry hive file\n",
- filename);
- errno = ENOTSUP;
- goto error;
- }
-
- /* Check major version. */
- uint32_t major_ver = le32toh (h->hdr->major_ver);
- if (major_ver != 1) {
- fprintf (stderr,
- "hivex: %s: hive file major version %" PRIu32 " (expected 1)\n",
- filename, major_ver);
- errno = ENOTSUP;
- goto error;
- }
-
- h->bitmap = calloc (1 + h->size / 32, 1);
- if (h->bitmap == NULL)
- goto error;
-
- /* Header checksum. */
- uint32_t sum = header_checksum (h);
- if (sum != le32toh (h->hdr->csum)) {
- fprintf (stderr, "hivex: %s: bad checksum in hive header\n", filename);
- errno = EINVAL;
- goto error;
- }
-
- /* Last modified time. */
- h->last_modified = le64toh ((int64_t) h->hdr->last_modified);
-
- if (h->msglvl >= 2) {
- char *name = windows_utf16_to_utf8 (h->hdr->name, 64);
-
- fprintf (stderr,
- "hivex_open: header fields:\n"
- " file version %" PRIu32 ".%" PRIu32 "\n"
- " sequence nos %" PRIu32 " %" PRIu32 "\n"
- " (sequences nos should match if hive was synched at shutdown)\n"
- " last modified %" PRIu64 "\n"
- " (Windows filetime, x 100 ns since 1601-01-01)\n"
- " original file name %s\n"
- " (only 32 chars are stored, name is probably truncated)\n"
- " root offset 0x%x + 0x1000\n"
- " end of last page 0x%x + 0x1000 (total file size 0x%zx)\n"
- " checksum 0x%x (calculated 0x%x)\n",
- major_ver, le32toh (h->hdr->minor_ver),
- le32toh (h->hdr->sequence1), le32toh (h->hdr->sequence2),
- h->last_modified,
- name ? name : "(conversion failed)",
- le32toh (h->hdr->offset),
- le32toh (h->hdr->blocks), h->size,
- le32toh (h->hdr->csum), sum);
- free (name);
- }
-
- h->rootoffs = le32toh (h->hdr->offset) + 0x1000;
- h->endpages = le32toh (h->hdr->blocks) + 0x1000;
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_open: root offset = 0x%zx\n", h->rootoffs);
-
- /* We'll set this flag when we see a block with the root offset (ie.
- * the root block).
- */
- int seen_root_block = 0, bad_root_block = 0;
-
- /* Collect some stats. */
- size_t pages = 0; /* Number of hbin pages read. */
- size_t smallest_page = SIZE_MAX, largest_page = 0;
- size_t blocks = 0; /* Total number of blocks found. */
- size_t smallest_block = SIZE_MAX, largest_block = 0, blocks_bytes = 0;
- size_t used_blocks = 0; /* Total number of used blocks found. */
- size_t used_size = 0; /* Total size (bytes) of used blocks. */
-
- /* Read the pages and blocks. The aim here is to be robust against
- * corrupt or malicious registries. So we make sure the loops
- * always make forward progress. We add the address of each block
- * we read to a hash table so pointers will only reference the start
- * of valid blocks.
- */
- size_t off;
- struct ntreg_hbin_page *page;
- for (off = 0x1000; off < h->size; off += le32toh (page->page_size)) {
- if (off >= h->endpages)
- break;
-
- page = (struct ntreg_hbin_page *) ((char *) h->addr + off);
- if (page->magic[0] != 'h' ||
- page->magic[1] != 'b' ||
- page->magic[2] != 'i' ||
- page->magic[3] != 'n') {
- fprintf (stderr, "hivex: %s: trailing garbage at end of file "
- "(at 0x%zx, after %zu pages)\n",
- filename, off, pages);
- errno = ENOTSUP;
- goto error;
- }
-
- size_t page_size = le32toh (page->page_size);
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_open: page at 0x%zx, size %zu\n", off, page_size);
- pages++;
- if (page_size < smallest_page) smallest_page = page_size;
- if (page_size > largest_page) largest_page = page_size;
-
- if (page_size <= sizeof (struct ntreg_hbin_page) ||
- (page_size & 0x0fff) != 0) {
- fprintf (stderr, "hivex: %s: page size %zu at 0x%zx, bad registry\n",
- filename, page_size, off);
- errno = ENOTSUP;
- goto error;
- }
-
- /* Read the blocks in this page. */
- size_t blkoff;
- struct ntreg_hbin_block *block;
- size_t seg_len;
- for (blkoff = off + 0x20;
- blkoff < off + page_size;
- blkoff += seg_len) {
- blocks++;
-
- int is_root = blkoff == h->rootoffs;
- if (is_root)
- seen_root_block = 1;
-
- block = (struct ntreg_hbin_block *) ((char *) h->addr + blkoff);
- int used;
- seg_len = block_len (h, blkoff, &used);
- if (seg_len <= 4 || (seg_len & 3) != 0) {
- fprintf (stderr, "hivex: %s: block size %" PRIu32 " at 0x%zx,"
- " bad registry\n",
- filename, le32toh (block->seg_len), blkoff);
- errno = ENOTSUP;
- goto error;
- }
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_open: %s block id %d,%d at 0x%zx size %zu%s\n",
- used ? "used" : "free", block->id[0], block->id[1], blkoff,
- seg_len, is_root ? " (root)" : "");
-
- blocks_bytes += seg_len;
- if (seg_len < smallest_block) smallest_block = seg_len;
- if (seg_len > largest_block) largest_block = seg_len;
-
- if (is_root && !used)
- bad_root_block = 1;
-
- if (used) {
- used_blocks++;
- used_size += seg_len;
-
- /* Root block must be an nk-block. */
- if (is_root && (block->id[0] != 'n' || block->id[1] != 'k'))
- bad_root_block = 1;
-
- /* Note this blkoff is a valid address. */
- BITMAP_SET (h->bitmap, blkoff);
- }
- }
- }
-
- if (!seen_root_block) {
- fprintf (stderr, "hivex: %s: no root block found\n", filename);
- errno = ENOTSUP;
- goto error;
- }
-
- if (bad_root_block) {
- fprintf (stderr, "hivex: %s: bad root block (free or not nk)\n", filename);
- errno = ENOTSUP;
- goto error;
- }
-
- if (h->msglvl >= 1)
- fprintf (stderr,
- "hivex_open: successfully read Windows Registry hive file:\n"
- " pages: %zu [sml: %zu, lge: %zu]\n"
- " blocks: %zu [sml: %zu, avg: %zu, lge: %zu]\n"
- " blocks used: %zu\n"
- " bytes used: %zu\n",
- pages, smallest_page, largest_page,
- blocks, smallest_block, blocks_bytes / blocks, largest_block,
- used_blocks, used_size);
-
- return h;
-
- error:;
- int err = errno;
- if (h) {
- free (h->bitmap);
- if (h->addr && h->size && h->addr != MAP_FAILED) {
- if (!h->writable)
- munmap (h->addr, h->size);
- else
- free (h->addr);
- }
- if (h->fd >= 0)
- close (h->fd);
- free (h->filename);
- free (h);
- }
- errno = err;
- return NULL;
-}
-
-int
-hivex_close (hive_h *h)
-{
- int r;
-
- if (h->msglvl >= 1)
- fprintf (stderr, "hivex_close\n");
-
- free (h->bitmap);
- if (!h->writable)
- munmap (h->addr, h->size);
- else
- free (h->addr);
- if (h->fd >= 0)
- r = close (h->fd);
- else
- r = 0;
- free (h->filename);
- free (h);
-
- return r;
-}
-
-/*----------------------------------------------------------------------
- * Reading.
- */
-
-hive_node_h
-hivex_root (hive_h *h)
-{
- hive_node_h ret = h->rootoffs;
- if (!IS_VALID_BLOCK (h, ret)) {
- errno = HIVEX_NO_KEY;
- return 0;
- }
- return ret;
-}
-
-size_t
-hivex_node_struct_length (hive_h *h, hive_node_h node)
-{
- if (!IS_VALID_BLOCK (h, node) || !BLOCK_ID_EQ (h, node, "nk")) {
- errno = EINVAL;
- return 0;
- }
-
- struct ntreg_nk_record *nk =
- (struct ntreg_nk_record *) ((char *) h->addr + node);
- size_t name_len = le16toh (nk->name_len);
- /* -1 to avoid double-counting the first name character */
- size_t ret = name_len + sizeof (struct ntreg_nk_record) - 1;
- int used;
- size_t seg_len = block_len (h, node, &used);
- if (ret > seg_len) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_struct_length: returning EFAULT because"
- " node name is too long (%zu, %zu)\n", name_len, seg_len);
- errno = EFAULT;
- return 0;
- }
- return ret;
-}
-
-char *
-hivex_node_name (hive_h *h, hive_node_h node)
-{
- if (!IS_VALID_BLOCK (h, node) || !BLOCK_ID_EQ (h, node, "nk")) {
- errno = EINVAL;
- return NULL;
- }
-
- struct ntreg_nk_record *nk =
- (struct ntreg_nk_record *) ((char *) h->addr + node);
-
- /* AFAIK the node name is always plain ASCII, so no conversion
- * to UTF-8 is necessary. However we do need to nul-terminate
- * the string.
- */
-
- /* nk->name_len is unsigned, 16 bit, so this is safe ... However
- * we have to make sure the length doesn't exceed the block length.
- */
- size_t len = le16toh (nk->name_len);
- size_t seg_len = block_len (h, node, NULL);
- if (sizeof (struct ntreg_nk_record) + len - 1 > seg_len) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_name: returning EFAULT because node name"
- " is too long (%zu, %zu)\n",
- len, seg_len);
- errno = EFAULT;
- return NULL;
- }
-
- char *ret = malloc (len + 1);
- if (ret == NULL)
- return NULL;
- memcpy (ret, nk->name, len);
- ret[len] = '\0';
- return ret;
-}
-
-static int64_t
-timestamp_check (hive_h *h, hive_node_h node, int64_t timestamp)
-{
- if (timestamp < 0) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex: timestamp_check: "
- "negative time reported at %zu: %" PRIi64 "\n",
- node, timestamp);
- errno = EINVAL;
- return -1;
- }
-
- return timestamp;
-}
-
-int64_t
-hivex_last_modified (hive_h *h)
-{
- return timestamp_check (h, 0, h->last_modified);
-}
-
-int64_t
-hivex_node_timestamp (hive_h *h, hive_node_h node)
-{
- int64_t ret;
-
- if (!IS_VALID_BLOCK (h, node) || !BLOCK_ID_EQ (h, node, "nk")) {
- errno = EINVAL;
- return -1;
- }
-
- struct ntreg_nk_record *nk =
- (struct ntreg_nk_record *) ((char *) h->addr + node);
-
- ret = le64toh (nk->timestamp);
- return timestamp_check (h, node, ret);
-}
-
-#if 0
-/* I think the documentation for the sk and classname fields in the nk
- * record is wrong, or else the offset field is in the wrong place.
- * Otherwise this makes no sense. Disabled this for now -- it's not
- * useful for reading the registry anyway.
- */
-
-hive_security_h
-hivex_node_security (hive_h *h, hive_node_h node)
-{
- if (!IS_VALID_BLOCK (h, node) || !BLOCK_ID_EQ (h, node, "nk")) {
- errno = EINVAL;
- return 0;
- }
-
- struct ntreg_nk_record *nk = (struct ntreg_nk_record *) (h->addr + node);
-
- hive_node_h ret = le32toh (nk->sk);
- ret += 0x1000;
- if (!IS_VALID_BLOCK (h, ret)) {
- errno = EFAULT;
- return 0;
- }
- return ret;
-}
-
-hive_classname_h
-hivex_node_classname (hive_h *h, hive_node_h node)
-{
- if (!IS_VALID_BLOCK (h, node) || !BLOCK_ID_EQ (h, node, "nk")) {
- errno = EINVAL;
- return 0;
- }
-
- struct ntreg_nk_record *nk = (struct ntreg_nk_record *) (h->addr + node);
-
- hive_node_h ret = le32toh (nk->classname);
- ret += 0x1000;
- if (!IS_VALID_BLOCK (h, ret)) {
- errno = EFAULT;
- return 0;
- }
- return ret;
-}
-#endif
-
-/* Structure for returning 0-terminated lists of offsets (nodes,
- * values, etc).
- */
-struct offset_list {
- size_t *offsets;
- size_t len;
- size_t alloc;
-};
-
-static void
-init_offset_list (struct offset_list *list)
-{
- list->len = 0;
- list->alloc = 0;
- list->offsets = NULL;
-}
-
-#define INIT_OFFSET_LIST(name) \
- struct offset_list name; \
- init_offset_list (&name)
-
-/* Preallocates the offset_list, but doesn't make the contents longer. */
-static int
-grow_offset_list (struct offset_list *list, size_t alloc)
-{
- assert (alloc >= list->len);
- size_t *p = realloc (list->offsets, alloc * sizeof (size_t));
- if (p == NULL)
- return -1;
- list->offsets = p;
- list->alloc = alloc;
- return 0;
-}
-
-static int
-add_to_offset_list (struct offset_list *list, size_t offset)
-{
- if (list->len >= list->alloc) {
- if (grow_offset_list (list, list->alloc ? list->alloc * 2 : 4) == -1)
- return -1;
- }
- list->offsets[list->len] = offset;
- list->len++;
- return 0;
-}
-
-static void
-free_offset_list (struct offset_list *list)
-{
- free (list->offsets);
-}
-
-static size_t *
-return_offset_list (struct offset_list *list)
-{
- if (add_to_offset_list (list, 0) == -1)
- return NULL;
- return list->offsets; /* caller frees */
-}
-
-/* Iterate over children, returning child nodes and intermediate blocks. */
-#define GET_CHILDREN_NO_CHECK_NK 1
-
-static int
-get_children (hive_h *h, hive_node_h node,
- hive_node_h **children_ret, size_t **blocks_ret,
- int flags)
-{
- if (!IS_VALID_BLOCK (h, node) || !BLOCK_ID_EQ (h, node, "nk")) {
- errno = EINVAL;
- return -1;
- }
-
- struct ntreg_nk_record *nk =
- (struct ntreg_nk_record *) ((char *) h->addr + node);
-
- size_t nr_subkeys_in_nk = le32toh (nk->nr_subkeys);
-
- INIT_OFFSET_LIST (children);
- INIT_OFFSET_LIST (blocks);
-
- /* Deal with the common "no subkeys" case quickly. */
- if (nr_subkeys_in_nk == 0)
- goto ok;
-
- /* Arbitrarily limit the number of subkeys we will ever deal with. */
- if (nr_subkeys_in_nk > HIVEX_MAX_SUBKEYS) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex: get_children: returning ERANGE because "
- "nr_subkeys_in_nk > HIVEX_MAX_SUBKEYS (%zu > %d)\n",
- nr_subkeys_in_nk, HIVEX_MAX_SUBKEYS);
- errno = ERANGE;
- goto error;
- }
-
- /* Preallocate space for the children. */
- if (grow_offset_list (&children, nr_subkeys_in_nk) == -1)
- goto error;
-
- /* The subkey_lf field can point either to an lf-record, which is
- * the common case, or if there are lots of subkeys, to an
- * ri-record.
- */
- size_t subkey_lf = le32toh (nk->subkey_lf);
- subkey_lf += 0x1000;
- if (!IS_VALID_BLOCK (h, subkey_lf)) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_children: returning EFAULT"
- " because subkey_lf is not a valid block (0x%zx)\n",
- subkey_lf);
- errno = EFAULT;
- goto error;
- }
-
- if (add_to_offset_list (&blocks, subkey_lf) == -1)
- goto error;
-
- struct ntreg_hbin_block *block =
- (struct ntreg_hbin_block *) ((char *) h->addr + subkey_lf);
-
- /* Points to lf-record? (Note, also "lh" but that is basically the
- * same as "lf" as far as we are concerned here).
- */
- if (block->id[0] == 'l' && (block->id[1] == 'f' || block->id[1] == 'h')) {
- struct ntreg_lf_record *lf = (struct ntreg_lf_record *) block;
-
- /* Check number of subkeys in the nk-record matches number of subkeys
- * in the lf-record.
- */
- size_t nr_subkeys_in_lf = le16toh (lf->nr_keys);
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_children: nr_subkeys_in_nk = %zu,"
- " nr_subkeys_in_lf = %zu\n",
- nr_subkeys_in_nk, nr_subkeys_in_lf);
-
- if (nr_subkeys_in_nk != nr_subkeys_in_lf) {
- errno = ENOTSUP;
- goto error;
- }
-
- size_t len = block_len (h, subkey_lf, NULL);
- if (8 + nr_subkeys_in_lf * 8 > len) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_children: returning EFAULT"
- " because too many subkeys (%zu, %zu)\n",
- nr_subkeys_in_lf, len);
- errno = EFAULT;
- goto error;
- }
-
- size_t i;
- for (i = 0; i < nr_subkeys_in_lf; ++i) {
- hive_node_h subkey = le32toh (lf->keys[i].offset);
- subkey += 0x1000;
- if (!(flags & GET_CHILDREN_NO_CHECK_NK)) {
- if (!IS_VALID_BLOCK (h, subkey)) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_children: returning EFAULT"
- " because subkey is not a valid block (0x%zx)\n",
- subkey);
- errno = EFAULT;
- goto error;
- }
- }
- if (add_to_offset_list (&children, subkey) == -1)
- goto error;
- }
- goto ok;
- }
- /* Points to ri-record? */
- else if (block->id[0] == 'r' && block->id[1] == 'i') {
- struct ntreg_ri_record *ri = (struct ntreg_ri_record *) block;
-
- size_t nr_offsets = le16toh (ri->nr_offsets);
-
- /* Count total number of children. */
- size_t i, count = 0;
- for (i = 0; i < nr_offsets; ++i) {
- hive_node_h offset = le32toh (ri->offset[i]);
- offset += 0x1000;
- if (!IS_VALID_BLOCK (h, offset)) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_children: returning EFAULT"
- " because ri-offset is not a valid block (0x%zx)\n",
- offset);
- errno = EFAULT;
- goto error;
- }
- if (!BLOCK_ID_EQ (h, offset, "lf") &&
- !BLOCK_ID_EQ (h, offset, "lh") &&
- !BLOCK_ID_EQ (h, offset, "li")) {
- if (h->msglvl >= 2)
- fprintf (stderr, "get_children: returning ENOTSUP because"
- " ri-record offset does not point to lf/lh/li (0x%zx)\n",
- offset);
- errno = ENOTSUP;
- goto error;
- }
-
- if (add_to_offset_list (&blocks, offset) == -1)
- goto error;
-
- struct ntreg_lf_record *lf =
- (struct ntreg_lf_record *) ((char *) h->addr + offset);
-
- count += le16toh (lf->nr_keys);
- }
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_children: nr_subkeys_in_nk = %zu,"
- " counted = %zu\n",
- nr_subkeys_in_nk, count);
-
- if (nr_subkeys_in_nk != count) {
- errno = ENOTSUP;
- goto error;
- }
-
- /* Copy list of children. Note nr_subkeys_in_nk is limited to
- * something reasonable above.
- */
- for (i = 0; i < nr_offsets; ++i) {
- hive_node_h offset = le32toh (ri->offset[i]);
- offset += 0x1000;
- if (!IS_VALID_BLOCK (h, offset)) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_children: returning EFAULT"
- " because ri-offset is not a valid block (0x%zx)\n",
- offset);
- errno = EFAULT;
- goto error;
- }
- if (BLOCK_ID_EQ (h, offset, "li")) {
- /* "ri" and "li" are basically the same */
- struct ntreg_ri_record *li =
- (struct ntreg_ri_record *) ((char *) h->addr + offset);
-
- size_t j;
- for (j = 0; j < le16toh (li->nr_offsets); ++j) {
- hive_node_h subkey = le32toh (li->offset[j]);
- subkey += 0x1000;
- if (!(flags & GET_CHILDREN_NO_CHECK_NK)) {
- if (!IS_VALID_BLOCK (h, subkey)) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_children: returning EFAULT because"
- " li indirect subkey is not a valid block (0x%zx)\n",
- subkey);
- errno = EFAULT;
- goto error;
- }
- }
- if (add_to_offset_list (&children, subkey) == -1)
- goto error;
- }
- } else { /* "lf" or "lh" block */
- struct ntreg_lf_record *lf =
- (struct ntreg_lf_record *) ((char *) h->addr + offset);
-
- size_t j;
- for (j = 0; j < le16toh (lf->nr_keys); ++j) {
- hive_node_h subkey = le32toh (lf->keys[j].offset);
- subkey += 0x1000;
- if (!(flags & GET_CHILDREN_NO_CHECK_NK)) {
- if (!IS_VALID_BLOCK (h, subkey)) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_children: returning EFAULT because"
- " lf/lh indirect subkey is not a valid block (0x%zx)\n",
- subkey);
- errno = EFAULT;
- goto error;
- }
- }
- if (add_to_offset_list (&children, subkey) == -1)
- goto error;
- }
- }
- }
- goto ok;
- }
- /* else not supported, set errno and fall through */
- if (h->msglvl >= 2)
- fprintf (stderr, "get_children: returning ENOTSUP"
- " because subkey block is not lf/lh/li/ri (0x%zx, %d, %d)\n",
- subkey_lf, block->id[0], block->id[1]);
- errno = ENOTSUP;
- error:
- free_offset_list (&children);
- free_offset_list (&blocks);
- return -1;
-
- ok:
- *children_ret = return_offset_list (&children);
- *blocks_ret = return_offset_list (&blocks);
- if (!*children_ret || !*blocks_ret)
- goto error;
- return 0;
-}
-
-hive_node_h *
-hivex_node_children (hive_h *h, hive_node_h node)
-{
- hive_node_h *children;
- size_t *blocks;
-
- if (get_children (h, node, &children, &blocks, 0) == -1)
- return NULL;
-
- free (blocks);
- return children;
-}
-
-/* Very inefficient, but at least having a separate API call
- * allows us to make it more efficient in future.
- */
-hive_node_h
-hivex_node_get_child (hive_h *h, hive_node_h node, const char *nname)
-{
- hive_node_h *children = NULL;
- char *name = NULL;
- hive_node_h ret = 0;
-
- children = hivex_node_children (h, node);
- if (!children) goto error;
-
- size_t i;
- for (i = 0; children[i] != 0; ++i) {
- name = hivex_node_name (h, children[i]);
- if (!name) goto error;
- if (STRCASEEQ (name, nname)) {
- ret = children[i];
- break;
- }
- free (name); name = NULL;
- }
-
- error:
- free (children);
- free (name);
- return ret;
-}
-
-hive_node_h
-hivex_node_parent (hive_h *h, hive_node_h node)
-{
- if (!IS_VALID_BLOCK (h, node) || !BLOCK_ID_EQ (h, node, "nk")) {
- errno = EINVAL;
- return 0;
- }
-
- struct ntreg_nk_record *nk =
- (struct ntreg_nk_record *) ((char *) h->addr + node);
-
- hive_node_h ret = le32toh (nk->parent);
- ret += 0x1000;
- if (!IS_VALID_BLOCK (h, ret)) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_parent: returning EFAULT"
- " because parent is not a valid block (0x%zx)\n",
- ret);
- errno = EFAULT;
- return 0;
- }
- return ret;
-}
-
-static int
-get_values (hive_h *h, hive_node_h node,
- hive_value_h **values_ret, size_t **blocks_ret)
-{
- if (!IS_VALID_BLOCK (h, node) || !BLOCK_ID_EQ (h, node, "nk")) {
- errno = EINVAL;
- return -1;
- }
-
- struct ntreg_nk_record *nk =
- (struct ntreg_nk_record *) ((char *) h->addr + node);
-
- size_t nr_values = le32toh (nk->nr_values);
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_values: nr_values = %zu\n", nr_values);
-
- INIT_OFFSET_LIST (values);
- INIT_OFFSET_LIST (blocks);
-
- /* Deal with the common "no values" case quickly. */
- if (nr_values == 0)
- goto ok;
-
- /* Arbitrarily limit the number of values we will ever deal with. */
- if (nr_values > HIVEX_MAX_VALUES) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex: get_values: returning ERANGE"
- " because nr_values > HIVEX_MAX_VALUES (%zu > %d)\n",
- nr_values, HIVEX_MAX_VALUES);
- errno = ERANGE;
- goto error;
- }
-
- /* Preallocate space for the values. */
- if (grow_offset_list (&values, nr_values) == -1)
- goto error;
-
- /* Get the value list and check it looks reasonable. */
- size_t vlist_offset = le32toh (nk->vallist);
- vlist_offset += 0x1000;
- if (!IS_VALID_BLOCK (h, vlist_offset)) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_values: returning EFAULT"
- " because value list is not a valid block (0x%zx)\n",
- vlist_offset);
- errno = EFAULT;
- goto error;
- }
-
- if (add_to_offset_list (&blocks, vlist_offset) == -1)
- goto error;
-
- struct ntreg_value_list *vlist =
- (struct ntreg_value_list *) ((char *) h->addr + vlist_offset);
-
- size_t len = block_len (h, vlist_offset, NULL);
- if (4 + nr_values * 4 > len) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_values: returning EFAULT"
- " because value list is too long (%zu, %zu)\n",
- nr_values, len);
- errno = EFAULT;
- goto error;
- }
-
- size_t i;
- for (i = 0; i < nr_values; ++i) {
- hive_node_h value = le32toh (vlist->offset[i]);
- value += 0x1000;
- if (!IS_VALID_BLOCK (h, value)) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_values: returning EFAULT"
- " because value is not a valid block (0x%zx)\n",
- value);
- errno = EFAULT;
- goto error;
- }
- if (add_to_offset_list (&values, value) == -1)
- goto error;
- }
-
- ok:
- *values_ret = return_offset_list (&values);
- *blocks_ret = return_offset_list (&blocks);
- if (!*values_ret || !*blocks_ret)
- goto error;
- return 0;
-
- error:
- free_offset_list (&values);
- free_offset_list (&blocks);
- return -1;
-}
-
-hive_value_h *
-hivex_node_values (hive_h *h, hive_node_h node)
-{
- hive_value_h *values;
- size_t *blocks;
-
- if (get_values (h, node, &values, &blocks) == -1)
- return NULL;
-
- free (blocks);
- return values;
-}
-
-/* Very inefficient, but at least having a separate API call
- * allows us to make it more efficient in future.
- */
-hive_value_h
-hivex_node_get_value (hive_h *h, hive_node_h node, const char *key)
-{
- hive_value_h *values = NULL;
- char *name = NULL;
- hive_value_h ret = 0;
-
- values = hivex_node_values (h, node);
- if (!values) goto error;
-
- size_t i;
- for (i = 0; values[i] != 0; ++i) {
- name = hivex_value_key (h, values[i]);
- if (!name) goto error;
- if (STRCASEEQ (name, key)) {
- ret = values[i];
- break;
- }
- free (name); name = NULL;
- }
-
- error:
- free (values);
- free (name);
- return ret;
-}
-
-size_t
-hivex_value_struct_length (hive_h *h, hive_value_h value)
-{
- size_t key_len;
-
- errno = 0;
- key_len = hivex_value_key_len (h, value);
- if (key_len == 0 && errno != 0)
- return 0;
-
- /* -1 to avoid double-counting the first name character */
- return key_len + sizeof (struct ntreg_vk_record) - 1;
-}
-
-size_t
-hivex_value_key_len (hive_h *h, hive_value_h value)
-{
- if (!IS_VALID_BLOCK (h, value) || !BLOCK_ID_EQ (h, value, "vk")) {
- errno = EINVAL;
- return 0;
- }
-
- struct ntreg_vk_record *vk =
- (struct ntreg_vk_record *) ((char *) h->addr + value);
-
- /* vk->name_len is unsigned, 16 bit, so this is safe ... However
- * we have to make sure the length doesn't exceed the block length.
- */
- size_t ret = le16toh (vk->name_len);
- size_t seg_len = block_len (h, value, NULL);
- if (sizeof (struct ntreg_vk_record) + ret - 1 > seg_len) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_value_key_len: returning EFAULT"
- " because key length is too long (%zu, %zu)\n",
- ret, seg_len);
- errno = EFAULT;
- return 0;
- }
- return ret;
-}
-
-char *
-hivex_value_key (hive_h *h, hive_value_h value)
-{
- if (!IS_VALID_BLOCK (h, value) || !BLOCK_ID_EQ (h, value, "vk")) {
- errno = EINVAL;
- return 0;
- }
-
- struct ntreg_vk_record *vk =
- (struct ntreg_vk_record *) ((char *) h->addr + value);
-
- /* AFAIK the key is always plain ASCII, so no conversion to UTF-8 is
- * necessary. However we do need to nul-terminate the string.
- */
- errno = 0;
- size_t len = hivex_value_key_len (h, value);
- if (len == 0 && errno != 0)
- return NULL;
-
- char *ret = malloc (len + 1);
- if (ret == NULL)
- return NULL;
- memcpy (ret, vk->name, len);
- ret[len] = '\0';
- return ret;
-}
-
-int
-hivex_value_type (hive_h *h, hive_value_h value, hive_type *t, size_t *len)
-{
- if (!IS_VALID_BLOCK (h, value) || !BLOCK_ID_EQ (h, value, "vk")) {
- errno = EINVAL;
- return -1;
- }
-
- struct ntreg_vk_record *vk =
- (struct ntreg_vk_record *) ((char *) h->addr + value);
-
- if (t)
- *t = le32toh (vk->data_type);
-
- if (len) {
- *len = le32toh (vk->data_len);
- *len &= 0x7fffffff; /* top bit indicates if data is stored inline */
- }
-
- return 0;
-}
-
-hive_value_h
-hivex_value_data_cell_offset (hive_h *h, hive_value_h value, size_t *len)
-{
- if (!IS_VALID_BLOCK (h, value) || !BLOCK_ID_EQ (h, value, "vk")) {
- errno = EINVAL;
- return 0;
- }
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_value_data_cell_offset: value=0x%zx\n", value);
- struct ntreg_vk_record *vk =
- (struct ntreg_vk_record *) ((char *) h->addr + value);
-
- size_t data_len;
- int is_inline;
-
- data_len = le32toh (vk->data_len);
- is_inline = !!(data_len & 0x80000000);
- data_len &= 0x7fffffff;
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_value_data_cell_offset: is_inline=%d\n", is_inline);
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_value_data_cell_offset: data_len=%zx\n", data_len);
-
- if (is_inline && data_len > 4) {
- errno = ENOTSUP;
- return 0;
- }
-
- if (is_inline) {
- /* There is no other location for the value data. */
- if (len)
- *len = 0;
- return 0;
- } else {
- if (len)
- *len = data_len + 4; /* Include 4 header length bytes */
- }
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_value_data_cell_offset: Proceeding with indirect data.\n");
-
- size_t data_offset = le32toh (vk->data_offset);
- data_offset += 0x1000; /* Add 0x1000 because everything's off by 4KiB */
- if (!IS_VALID_BLOCK (h, data_offset)) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_value_data_cell_offset: returning EFAULT because data "
- "offset is not a valid block (0x%zx)\n",
- data_offset);
- errno = EFAULT;
- return 0;
- }
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_value_data_cell_offset: data_offset=%zx\n", data_offset);
-
- return data_offset;
-}
-
-char *
-hivex_value_value (hive_h *h, hive_value_h value,
- hive_type *t_rtn, size_t *len_rtn)
-{
- if (!IS_VALID_BLOCK (h, value) || !BLOCK_ID_EQ (h, value, "vk")) {
- errno = EINVAL;
- return NULL;
- }
-
- struct ntreg_vk_record *vk =
- (struct ntreg_vk_record *) ((char *) h->addr + value);
-
- hive_type t;
- size_t len;
- int is_inline;
-
- t = le32toh (vk->data_type);
-
- len = le32toh (vk->data_len);
- is_inline = !!(len & 0x80000000);
- len &= 0x7fffffff;
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_value_value: value=0x%zx, t=%d, len=%zu, inline=%d\n",
- value, t, len, is_inline);
-
- if (t_rtn)
- *t_rtn = t;
- if (len_rtn)
- *len_rtn = len;
-
- if (is_inline && len > 4) {
- errno = ENOTSUP;
- return NULL;
- }
-
- /* Arbitrarily limit the length that we will read. */
- if (len > HIVEX_MAX_VALUE_LEN) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_value_value: returning ERANGE because data "
- "length > HIVEX_MAX_VALUE_LEN (%zu > %d)\n",
- len, HIVEX_MAX_SUBKEYS);
- errno = ERANGE;
- return NULL;
- }
-
- char *ret = malloc (len);
- if (ret == NULL)
- return NULL;
-
- if (is_inline) {
- memcpy (ret, (char *) &vk->data_offset, len);
- return ret;
- }
-
- size_t data_offset = le32toh (vk->data_offset);
- data_offset += 0x1000;
- if (!IS_VALID_BLOCK (h, data_offset)) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_value_value: returning EFAULT because data "
- "offset is not a valid block (0x%zx)\n",
- data_offset);
- errno = EFAULT;
- free (ret);
- return NULL;
- }
-
- /* Check that the declared size isn't larger than the block its in.
- *
- * XXX Some apparently valid registries are seen to have this,
- * so turn this into a warning and substitute the smaller length
- * instead.
- */
- size_t blen = block_len (h, data_offset, NULL);
- if (len > blen - 4 /* subtract 4 for block header */) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_value_value: warning: declared data length "
- "is longer than the block it is in "
- "(data 0x%zx, data len %zu, block len %zu)\n",
- data_offset, len, blen);
- len = blen - 4;
-
- /* Return the smaller length to the caller too. */
- if (len_rtn)
- *len_rtn = len;
- }
-
- char *data = (char *) h->addr + data_offset + 4;
- memcpy (ret, data, len);
- return ret;
-}
-
-static char *
-windows_utf16_to_utf8 (/* const */ char *input, size_t len)
-{
- iconv_t ic = iconv_open ("UTF-8", "UTF-16");
- if (ic == (iconv_t) -1)
- return NULL;
-
- /* iconv(3) has an insane interface ... */
-
- /* Mostly UTF-8 will be smaller, so this is a good initial guess. */
- size_t outalloc = len;
-
- again:;
- size_t inlen = len;
- size_t outlen = outalloc;
- char *out = malloc (outlen + 1);
- if (out == NULL) {
- int err = errno;
- iconv_close (ic);
- errno = err;
- return NULL;
- }
- char *inp = input;
- char *outp = out;
-
- size_t r = iconv (ic, &inp, &inlen, &outp, &outlen);
- if (r == (size_t) -1) {
- if (errno == E2BIG) {
- int err = errno;
- size_t prev = outalloc;
- /* Try again with a larger output buffer. */
- free (out);
- outalloc *= 2;
- if (outalloc < prev) {
- iconv_close (ic);
- errno = err;
- return NULL;
- }
- goto again;
- }
- else {
- /* Else some conversion failure, eg. EILSEQ, EINVAL. */
- int err = errno;
- iconv_close (ic);
- free (out);
- errno = err;
- return NULL;
- }
- }
-
- *outp = '\0';
- iconv_close (ic);
-
- return out;
-}
-
-char *
-hivex_value_string (hive_h *h, hive_value_h value)
-{
- hive_type t;
- size_t len;
- char *data = hivex_value_value (h, value, &t, &len);
-
- if (data == NULL)
- return NULL;
-
- if (t != hive_t_string && t != hive_t_expand_string && t != hive_t_link) {
- free (data);
- errno = EINVAL;
- return NULL;
- }
-
- /* Deal with the case where Windows has allocated a large buffer
- * full of random junk, and only the first few bytes of the buffer
- * contain a genuine UTF-16 string.
- *
- * In this case, iconv would try to process the junk bytes as UTF-16
- * and inevitably find an illegal sequence (EILSEQ). Instead, stop
- * after we find the first \0\0.
- *
- * (Found by Hilko Bengen in a fresh Windows XP SOFTWARE hive).
- */
- size_t slen = utf16_string_len_in_bytes_max (data, len);
- if (slen < len)
- len = slen;
-
- char *ret = windows_utf16_to_utf8 (data, len);
- free (data);
- if (ret == NULL)
- return NULL;
-
- return ret;
-}
-
-static void
-free_strings (char **argv)
-{
- if (argv) {
- size_t i;
-
- for (i = 0; argv[i] != NULL; ++i)
- free (argv[i]);
- free (argv);
- }
-}
-
-/* Get the length of a UTF-16 format string. Handle the string as
- * pairs of bytes, looking for the first \0\0 pair. Only read up to
- * 'len' maximum bytes.
- */
-static size_t
-utf16_string_len_in_bytes_max (const char *str, size_t len)
-{
- size_t ret = 0;
-
- while (len >= 2 && (str[0] || str[1])) {
- str += 2;
- ret += 2;
- len -= 2;
- }
-
- return ret;
-}
-
-/* http://blogs.msdn.com/oldnewthing/archive/2009/10/08/9904646.aspx */
-char **
-hivex_value_multiple_strings (hive_h *h, hive_value_h value)
-{
- hive_type t;
- size_t len;
- char *data = hivex_value_value (h, value, &t, &len);
-
- if (data == NULL)
- return NULL;
-
- if (t != hive_t_multiple_strings) {
- free (data);
- errno = EINVAL;
- return NULL;
- }
-
- size_t nr_strings = 0;
- char **ret = malloc ((1 + nr_strings) * sizeof (char *));
- if (ret == NULL) {
- free (data);
- return NULL;
- }
- ret[0] = NULL;
-
- char *p = data;
- size_t plen;
-
- while (p < data + len &&
- (plen = utf16_string_len_in_bytes_max (p, data + len - p)) > 0) {
- nr_strings++;
- char **ret2 = realloc (ret, (1 + nr_strings) * sizeof (char *));
- if (ret2 == NULL) {
- free_strings (ret);
- free (data);
- return NULL;
- }
- ret = ret2;
-
- ret[nr_strings-1] = windows_utf16_to_utf8 (p, plen);
- ret[nr_strings] = NULL;
- if (ret[nr_strings-1] == NULL) {
- free_strings (ret);
- free (data);
- return NULL;
- }
-
- p += plen + 2 /* skip over UTF-16 \0\0 at the end of this string */;
- }
-
- free (data);
- return ret;
-}
-
-int32_t
-hivex_value_dword (hive_h *h, hive_value_h value)
-{
- hive_type t;
- size_t len;
- void *data = hivex_value_value (h, value, &t, &len);
-
- if (data == NULL)
- return -1;
-
- if ((t != hive_t_dword && t != hive_t_dword_be) || len != 4) {
- free (data);
- errno = EINVAL;
- return -1;
- }
-
- int32_t ret = * (int32_t *) data;
- free (data);
- if (t == hive_t_dword) /* little endian */
- ret = le32toh (ret);
- else
- ret = be32toh (ret);
-
- return ret;
-}
-
-int64_t
-hivex_value_qword (hive_h *h, hive_value_h value)
-{
- hive_type t;
- size_t len;
- void *data = hivex_value_value (h, value, &t, &len);
-
- if (data == NULL)
- return -1;
-
- if (t != hive_t_qword || len != 8) {
- free (data);
- errno = EINVAL;
- return -1;
- }
-
- int64_t ret = * (int64_t *) data;
- free (data);
- ret = le64toh (ret); /* always little endian */
-
- return ret;
-}
-
-/*----------------------------------------------------------------------
- * Visiting.
- */
-
-int
-hivex_visit (hive_h *h, const struct hivex_visitor *visitor, size_t len,
- void *opaque, int flags)
-{
- return hivex_visit_node (h, hivex_root (h), visitor, len, opaque, flags);
-}
-
-static int hivex__visit_node (hive_h *h, hive_node_h node,
- const struct hivex_visitor *vtor,
- char *unvisited, void *opaque, int flags);
-
-int
-hivex_visit_node (hive_h *h, hive_node_h node,
- const struct hivex_visitor *visitor, size_t len, void *opaque,
- int flags)
-{
- struct hivex_visitor vtor;
- memset (&vtor, 0, sizeof vtor);
-
- /* Note that len might be larger *or smaller* than the expected size. */
- size_t copysize = len <= sizeof vtor ? len : sizeof vtor;
- memcpy (&vtor, visitor, copysize);
-
- /* This bitmap records unvisited nodes, so we don't loop if the
- * registry contains cycles.
- */
- char *unvisited = malloc (1 + h->size / 32);
- if (unvisited == NULL)
- return -1;
- memcpy (unvisited, h->bitmap, 1 + h->size / 32);
-
- int r = hivex__visit_node (h, node, &vtor, unvisited, opaque, flags);
- free (unvisited);
- return r;
-}
-
-static int
-hivex__visit_node (hive_h *h, hive_node_h node,
- const struct hivex_visitor *vtor, char *unvisited,
- void *opaque, int flags)
-{
- int skip_bad = flags & HIVEX_VISIT_SKIP_BAD;
- char *name = NULL;
- hive_value_h *values = NULL;
- hive_node_h *children = NULL;
- char *key = NULL;
- char *str = NULL;
- char **strs = NULL;
- int i;
-
- /* Return -1 on all callback errors. However on internal errors,
- * check if skip_bad is set and suppress those errors if so.
- */
- int ret = -1;
-
- if (!BITMAP_TST (unvisited, node)) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex__visit_node: contains cycle:"
- " visited node 0x%zx already\n",
- node);
-
- errno = ELOOP;
- return skip_bad ? 0 : -1;
- }
- BITMAP_CLR (unvisited, node);
-
- name = hivex_node_name (h, node);
- if (!name) return skip_bad ? 0 : -1;
- if (vtor->node_start && vtor->node_start (h, opaque, node, name) == -1)
- goto error;
-
- values = hivex_node_values (h, node);
- if (!values) {
- ret = skip_bad ? 0 : -1;
- goto error;
- }
-
- for (i = 0; values[i] != 0; ++i) {
- hive_type t;
- size_t len;
-
- if (hivex_value_type (h, values[i], &t, &len) == -1) {
- ret = skip_bad ? 0 : -1;
- goto error;
- }
-
- key = hivex_value_key (h, values[i]);
- if (key == NULL) {
- ret = skip_bad ? 0 : -1;
- goto error;
- }
-
- if (vtor->value_any) {
- str = hivex_value_value (h, values[i], &t, &len);
- if (str == NULL) {
- ret = skip_bad ? 0 : -1;
- goto error;
- }
- if (vtor->value_any (h, opaque, node, values[i], t, len, key, str) == -1)
- goto error;
- free (str); str = NULL;
- }
- else {
- switch (t) {
- case hive_t_none:
- str = hivex_value_value (h, values[i], &t, &len);
- if (str == NULL) {
- ret = skip_bad ? 0 : -1;
- goto error;
- }
- if (t != hive_t_none) {
- ret = skip_bad ? 0 : -1;
- goto error;
- }
- if (vtor->value_none &&
- vtor->value_none (h, opaque, node, values[i], t, len, key, str) == -1)
- goto error;
- free (str); str = NULL;
- break;
-
- case hive_t_string:
- case hive_t_expand_string:
- case hive_t_link:
- str = hivex_value_string (h, values[i]);
- if (str == NULL) {
- if (errno != EILSEQ && errno != EINVAL) {
- ret = skip_bad ? 0 : -1;
- goto error;
- }
- if (vtor->value_string_invalid_utf16) {
- str = hivex_value_value (h, values[i], &t, &len);
- if (vtor->value_string_invalid_utf16 (h, opaque, node, values[i],
- t, len, key, str) == -1)
- goto error;
- free (str); str = NULL;
- }
- break;
- }
- if (vtor->value_string &&
- vtor->value_string (h, opaque, node, values[i],
- t, len, key, str) == -1)
- goto error;
- free (str); str = NULL;
- break;
-
- case hive_t_dword:
- case hive_t_dword_be: {
- int32_t i32 = hivex_value_dword (h, values[i]);
- if (vtor->value_dword &&
- vtor->value_dword (h, opaque, node, values[i],
- t, len, key, i32) == -1)
- goto error;
- break;
- }
-
- case hive_t_qword: {
- int64_t i64 = hivex_value_qword (h, values[i]);
- if (vtor->value_qword &&
- vtor->value_qword (h, opaque, node, values[i],
- t, len, key, i64) == -1)
- goto error;
- break;
- }
-
- case hive_t_binary:
- str = hivex_value_value (h, values[i], &t, &len);
- if (str == NULL) {
- ret = skip_bad ? 0 : -1;
- goto error;
- }
- if (t != hive_t_binary) {
- ret = skip_bad ? 0 : -1;
- goto error;
- }
- if (vtor->value_binary &&
- vtor->value_binary (h, opaque, node, values[i],
- t, len, key, str) == -1)
- goto error;
- free (str); str = NULL;
- break;
-
- case hive_t_multiple_strings:
- strs = hivex_value_multiple_strings (h, values[i]);
- if (strs == NULL) {
- if (errno != EILSEQ && errno != EINVAL) {
- ret = skip_bad ? 0 : -1;
- goto error;
- }
- if (vtor->value_string_invalid_utf16) {
- str = hivex_value_value (h, values[i], &t, &len);
- if (vtor->value_string_invalid_utf16 (h, opaque, node, values[i],
- t, len, key, str) == -1)
- goto error;
- free (str); str = NULL;
- }
- break;
- }
- if (vtor->value_multiple_strings &&
- vtor->value_multiple_strings (h, opaque, node, values[i],
- t, len, key, strs) == -1)
- goto error;
- free_strings (strs); strs = NULL;
- break;
-
- case hive_t_resource_list:
- case hive_t_full_resource_description:
- case hive_t_resource_requirements_list:
- default:
- str = hivex_value_value (h, values[i], &t, &len);
- if (str == NULL) {
- ret = skip_bad ? 0 : -1;
- goto error;
- }
- if (vtor->value_other &&
- vtor->value_other (h, opaque, node, values[i],
- t, len, key, str) == -1)
- goto error;
- free (str); str = NULL;
- break;
- }
- }
-
- free (key); key = NULL;
- }
-
- children = hivex_node_children (h, node);
- if (children == NULL) {
- ret = skip_bad ? 0 : -1;
- goto error;
- }
-
- for (i = 0; children[i] != 0; ++i) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex__visit_node: %s: visiting subkey %d (0x%zx)\n",
- name, i, children[i]);
-
- if (hivex__visit_node (h, children[i], vtor, unvisited, opaque, flags) == -1)
- goto error;
- }
-
- if (vtor->node_end && vtor->node_end (h, opaque, node, name) == -1)
- goto error;
-
- ret = 0;
-
- error:
- free (name);
- free (values);
- free (children);
- free (key);
- free (str);
- free_strings (strs);
- return ret;
-}
-
-/*----------------------------------------------------------------------
- * Writing.
- */
-
-/* Allocate an hbin (page), extending the malloc'd space if necessary,
- * and updating the hive handle fields (but NOT the hive disk header
- * -- the hive disk header is updated when we commit). This function
- * also extends the bitmap if necessary.
- *
- * 'allocation_hint' is the size of the block allocation we would like
- * to make. Normally registry blocks are very small (avg 50 bytes)
- * and are contained in standard-sized pages (4KB), but the registry
- * can support blocks which are larger than a standard page, in which
- * case it creates a page of 8KB, 12KB etc.
- *
- * Returns:
- * > 0 : offset of first usable byte of new page (after page header)
- * 0 : error (errno set)
- */
-static size_t
-allocate_page (hive_h *h, size_t allocation_hint)
-{
- /* In almost all cases this will be 1. */
- size_t nr_4k_pages =
- 1 + (allocation_hint + sizeof (struct ntreg_hbin_page) - 1) / 4096;
- assert (nr_4k_pages >= 1);
-
- /* 'extend' is the number of bytes to extend the file by. Note that
- * hives found in the wild often contain slack between 'endpages'
- * and the actual end of the file, so we don't always need to make
- * the file larger.
- */
- ssize_t extend = h->endpages + nr_4k_pages * 4096 - h->size;
-
- if (h->msglvl >= 2) {
- fprintf (stderr, "allocate_page: current endpages = 0x%zx,"
- " current size = 0x%zx\n",
- h->endpages, h->size);
- fprintf (stderr, "allocate_page: extending file by %zd bytes"
- " (<= 0 if no extension)\n",
- extend);
- }
-
- if (extend > 0) {
- size_t oldsize = h->size;
- size_t newsize = h->size + extend;
- char *newaddr = realloc (h->addr, newsize);
- if (newaddr == NULL)
- return 0;
-
- size_t oldbitmapsize = 1 + oldsize / 32;
- size_t newbitmapsize = 1 + newsize / 32;
- char *newbitmap = realloc (h->bitmap, newbitmapsize);
- if (newbitmap == NULL) {
- free (newaddr);
- return 0;
- }
-
- h->addr = newaddr;
- h->size = newsize;
- h->bitmap = newbitmap;
-
- memset ((char *) h->addr + oldsize, 0, newsize - oldsize);
- memset (h->bitmap + oldbitmapsize, 0, newbitmapsize - oldbitmapsize);
- }
-
- size_t offset = h->endpages;
- h->endpages += nr_4k_pages * 4096;
-
- if (h->msglvl >= 2)
- fprintf (stderr, "allocate_page: new endpages = 0x%zx, new size = 0x%zx\n",
- h->endpages, h->size);
-
- /* Write the hbin header. */
- struct ntreg_hbin_page *page =
- (struct ntreg_hbin_page *) ((char *) h->addr + offset);
- page->magic[0] = 'h';
- page->magic[1] = 'b';
- page->magic[2] = 'i';
- page->magic[3] = 'n';
- page->offset_first = htole32 (offset - 0x1000);
- page->page_size = htole32 (nr_4k_pages * 4096);
- memset (page->unknown, 0, sizeof (page->unknown));
-
- if (h->msglvl >= 2)
- fprintf (stderr, "allocate_page: new page at 0x%zx\n", offset);
-
- /* Offset of first usable byte after the header. */
- return offset + sizeof (struct ntreg_hbin_page);
-}
-
-/* Allocate a single block, first allocating an hbin (page) at the end
- * of the current file if necessary. NB. To keep the implementation
- * simple and more likely to be correct, we do not reuse existing free
- * blocks.
- *
- * seg_len is the size of the block (this INCLUDES the block header).
- * The header of the block is initialized to -seg_len (negative to
- * indicate used). id[2] is the block ID (type), eg. "nk" for nk-
- * record. The block bitmap is updated to show this block as valid.
- * The rest of the contents of the block will be zero.
- *
- * **NB** Because allocate_block may reallocate the memory, all
- * pointers into the memory become potentially invalid. I really
- * love writing in C, can't you tell?
- *
- * Returns:
- * > 0 : offset of new block
- * 0 : error (errno set)
- */
-static size_t
-allocate_block (hive_h *h, size_t seg_len, const char id[2])
-{
- if (!h->writable) {
- errno = EROFS;
- return 0;
- }
-
- if (seg_len < 4) {
- /* The caller probably forgot to include the header. Note that
- * value lists have no ID field, so seg_len == 4 would be possible
- * for them, albeit unusual.
- */
- if (h->msglvl >= 2)
- fprintf (stderr, "allocate_block: refusing too small allocation (%zu),"
- " returning ERANGE\n", seg_len);
- errno = ERANGE;
- return 0;
- }
-
- /* Refuse really large allocations. */
- if (seg_len > HIVEX_MAX_ALLOCATION) {
- if (h->msglvl >= 2)
- fprintf (stderr, "allocate_block: refusing large allocation (%zu),"
- " returning ERANGE\n", seg_len);
- errno = ERANGE;
- return 0;
- }
-
- /* Round up allocation to multiple of 8 bytes. All blocks must be
- * on an 8 byte boundary.
- */
- seg_len = (seg_len + 7) & ~7;
-
- /* Allocate a new page if necessary. */
- if (h->endblocks == 0 || h->endblocks + seg_len > h->endpages) {
- size_t newendblocks = allocate_page (h, seg_len);
- if (newendblocks == 0)
- return 0;
- h->endblocks = newendblocks;
- }
-
- size_t offset = h->endblocks;
-
- if (h->msglvl >= 2)
- fprintf (stderr, "allocate_block: new block at 0x%zx, size %zu\n",
- offset, seg_len);
-
- struct ntreg_hbin_block *blockhdr =
- (struct ntreg_hbin_block *) ((char *) h->addr + offset);
-
- memset (blockhdr, 0, seg_len);
-
- blockhdr->seg_len = htole32 (- (int32_t) seg_len);
- if (id[0] && id[1] && seg_len >= sizeof (struct ntreg_hbin_block)) {
- blockhdr->id[0] = id[0];
- blockhdr->id[1] = id[1];
- }
-
- BITMAP_SET (h->bitmap, offset);
-
- h->endblocks += seg_len;
-
- /* If there is space after the last block in the last page, then we
- * have to put a dummy free block header here to mark the rest of
- * the page as free.
- */
- ssize_t rem = h->endpages - h->endblocks;
- if (rem > 0) {
- if (h->msglvl >= 2)
- fprintf (stderr, "allocate_block: marking remainder of page free"
- " starting at 0x%zx, size %zd\n", h->endblocks, rem);
-
- assert (rem >= 4);
-
- blockhdr = (struct ntreg_hbin_block *) ((char *) h->addr + h->endblocks);
- blockhdr->seg_len = htole32 ((int32_t) rem);
- }
-
- return offset;
-}
-
-/* 'offset' must point to a valid, used block. This function marks
- * the block unused (by updating the seg_len field) and invalidates
- * the bitmap. It does NOT do this recursively, so to avoid creating
- * unreachable used blocks, callers may have to recurse over the hive
- * structures. Also callers must ensure there are no references to
- * this block from other parts of the hive.
- */
-static void
-mark_block_unused (hive_h *h, size_t offset)
-{
- assert (h->writable);
- assert (IS_VALID_BLOCK (h, offset));
-
- if (h->msglvl >= 2)
- fprintf (stderr, "mark_block_unused: marking 0x%zx unused\n", offset);
-
- struct ntreg_hbin_block *blockhdr =
- (struct ntreg_hbin_block *) ((char *) h->addr + offset);
-
- size_t seg_len = block_len (h, offset, NULL);
- blockhdr->seg_len = htole32 (seg_len);
-
- BITMAP_CLR (h->bitmap, offset);
-}
-
-/* Delete all existing values at this node. */
-static int
-delete_values (hive_h *h, hive_node_h node)
-{
- assert (h->writable);
-
- hive_value_h *values;
- size_t *blocks;
- if (get_values (h, node, &values, &blocks) == -1)
- return -1;
-
- size_t i;
- for (i = 0; blocks[i] != 0; ++i)
- mark_block_unused (h, blocks[i]);
-
- free (blocks);
-
- for (i = 0; values[i] != 0; ++i) {
- struct ntreg_vk_record *vk =
- (struct ntreg_vk_record *) ((char *) h->addr + values[i]);
-
- size_t len;
- int is_inline;
- len = le32toh (vk->data_len);
- is_inline = !!(len & 0x80000000); /* top bit indicates is inline */
- len &= 0x7fffffff;
-
- if (!is_inline) { /* non-inline, so remove data block */
- size_t data_offset = le32toh (vk->data_offset);
- data_offset += 0x1000;
- mark_block_unused (h, data_offset);
- }
-
- /* remove vk record */
- mark_block_unused (h, values[i]);
- }
-
- free (values);
-
- struct ntreg_nk_record *nk =
- (struct ntreg_nk_record *) ((char *) h->addr + node);
- nk->nr_values = htole32 (0);
- nk->vallist = htole32 (0xffffffff);
-
- return 0;
-}
-
-int
-hivex_commit (hive_h *h, const char *filename, int flags)
-{
- if (flags != 0) {
- errno = EINVAL;
- return -1;
- }
-
- if (!h->writable) {
- errno = EROFS;
- return -1;
- }
-
- filename = filename ? : h->filename;
- int fd = open (filename, O_WRONLY|O_CREAT|O_TRUNC|O_NOCTTY, 0666);
- if (fd == -1)
- return -1;
-
- /* Update the header fields. */
- uint32_t sequence = le32toh (h->hdr->sequence1);
- sequence++;
- h->hdr->sequence1 = htole32 (sequence);
- h->hdr->sequence2 = htole32 (sequence);
- /* XXX Ought to update h->hdr->last_modified. */
- h->hdr->blocks = htole32 (h->endpages - 0x1000);
-
- /* Recompute header checksum. */
- uint32_t sum = header_checksum (h);
- h->hdr->csum = htole32 (sum);
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_commit: new header checksum: 0x%x\n", sum);
-
- if (full_write (fd, h->addr, h->size) != h->size) {
- int err = errno;
- close (fd);
- errno = err;
- return -1;
- }
-
- if (close (fd) == -1)
- return -1;
-
- return 0;
-}
-
-/* Calculate the hash for a lf or lh record offset.
- */
-static void
-calc_hash (const char *type, const char *name, void *ret)
-{
- size_t len = strlen (name);
-
- if (STRPREFIX (type, "lf"))
- /* Old-style, not used in current registries. */
- memcpy (ret, name, len < 4 ? len : 4);
- else {
- /* New-style for lh-records. */
- size_t i, c;
- uint32_t h = 0;
- for (i = 0; i < len; ++i) {
- c = c_toupper (name[i]);
- h *= 37;
- h += c;
- }
- *((uint32_t *) ret) = htole32 (h);
- }
-}
-
-/* Create a completely new lh-record containing just the single node. */
-static size_t
-new_lh_record (hive_h *h, const char *name, hive_node_h node)
-{
- static const char id[2] = { 'l', 'h' };
- size_t seg_len = sizeof (struct ntreg_lf_record);
- size_t offset = allocate_block (h, seg_len, id);
- if (offset == 0)
- return 0;
-
- struct ntreg_lf_record *lh =
- (struct ntreg_lf_record *) ((char *) h->addr + offset);
- lh->nr_keys = htole16 (1);
- lh->keys[0].offset = htole32 (node - 0x1000);
- calc_hash ("lh", name, lh->keys[0].hash);
-
- return offset;
-}
-
-/* Insert node into existing lf/lh-record at position.
- * This allocates a new record and marks the old one as unused.
- */
-static size_t
-insert_lf_record (hive_h *h, size_t old_offs, size_t posn,
- const char *name, hive_node_h node)
-{
- assert (IS_VALID_BLOCK (h, old_offs));
-
- /* Work around C stupidity.
- * http://www.redhat.com/archives/libguestfs/2010-February/msg00056.html
- */
- int test = BLOCK_ID_EQ (h, old_offs, "lf") || BLOCK_ID_EQ (h, old_offs, "lh");
- assert (test);
-
- struct ntreg_lf_record *old_lf =
- (struct ntreg_lf_record *) ((char *) h->addr + old_offs);
- size_t nr_keys = le16toh (old_lf->nr_keys);
-
- nr_keys++; /* in new record ... */
-
- size_t seg_len = sizeof (struct ntreg_lf_record) + (nr_keys-1) * 8;
-
- /* Copy the old_lf->id in case it moves during allocate_block. */
- char id[2];
- memcpy (id, old_lf->id, sizeof id);
-
- size_t new_offs = allocate_block (h, seg_len, id);
- if (new_offs == 0)
- return 0;
-
- /* old_lf could have been invalidated by allocate_block. */
- old_lf = (struct ntreg_lf_record *) ((char *) h->addr + old_offs);
-
- struct ntreg_lf_record *new_lf =
- (struct ntreg_lf_record *) ((char *) h->addr + new_offs);
- new_lf->nr_keys = htole16 (nr_keys);
-
- /* Copy the keys until we reach posn, insert the new key there, then
- * copy the remaining keys.
- */
- size_t i;
- for (i = 0; i < posn; ++i)
- new_lf->keys[i] = old_lf->keys[i];
-
- new_lf->keys[i].offset = htole32 (node - 0x1000);
- calc_hash (new_lf->id, name, new_lf->keys[i].hash);
-
- for (i = posn+1; i < nr_keys; ++i)
- new_lf->keys[i] = old_lf->keys[i-1];
-
- /* Old block is unused, return new block. */
- mark_block_unused (h, old_offs);
- return new_offs;
-}
-
-/* Compare name with name in nk-record. */
-static int
-compare_name_with_nk_name (hive_h *h, const char *name, hive_node_h nk_offs)
-{
- assert (IS_VALID_BLOCK (h, nk_offs));
- assert (BLOCK_ID_EQ (h, nk_offs, "nk"));
-
- /* Name in nk is not necessarily nul-terminated. */
- char *nname = hivex_node_name (h, nk_offs);
-
- /* Unfortunately we don't have a way to return errors here. */
- if (!nname) {
- perror ("compare_name_with_nk_name");
- return 0;
- }
-
- int r = strcasecmp (name, nname);
- free (nname);
-
- return r;
-}
-
-hive_node_h
-hivex_node_add_child (hive_h *h, hive_node_h parent, const char *name)
-{
- if (!h->writable) {
- errno = EROFS;
- return 0;
- }
-
- if (!IS_VALID_BLOCK (h, parent) || !BLOCK_ID_EQ (h, parent, "nk")) {
- errno = EINVAL;
- return 0;
- }
-
- if (name == NULL || strlen (name) == 0) {
- errno = EINVAL;
- return 0;
- }
-
- if (hivex_node_get_child (h, parent, name) != 0) {
- errno = EEXIST;
- return 0;
- }
-
- /* Create the new nk-record. */
- static const char nk_id[2] = { 'n', 'k' };
- size_t seg_len = sizeof (struct ntreg_nk_record) + strlen (name);
- hive_node_h node = allocate_block (h, seg_len, nk_id);
- if (node == 0)
- return 0;
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_add_child: allocated new nk-record"
- " for child at 0x%zx\n", node);
-
- struct ntreg_nk_record *nk =
- (struct ntreg_nk_record *) ((char *) h->addr + node);
- nk->flags = htole16 (0x0020); /* key is ASCII. */
- nk->parent = htole32 (parent - 0x1000);
- nk->subkey_lf = htole32 (0xffffffff);
- nk->subkey_lf_volatile = htole32 (0xffffffff);
- nk->vallist = htole32 (0xffffffff);
- nk->classname = htole32 (0xffffffff);
- nk->name_len = htole16 (strlen (name));
- strcpy (nk->name, name);
-
- /* Inherit parent sk. */
- struct ntreg_nk_record *parent_nk =
- (struct ntreg_nk_record *) ((char *) h->addr + parent);
- size_t parent_sk_offset = le32toh (parent_nk->sk);
- parent_sk_offset += 0x1000;
- if (!IS_VALID_BLOCK (h, parent_sk_offset) ||
- !BLOCK_ID_EQ (h, parent_sk_offset, "sk")) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_add_child: returning EFAULT"
- " because parent sk is not a valid block (%zu)\n",
- parent_sk_offset);
- errno = EFAULT;
- return 0;
- }
- struct ntreg_sk_record *sk =
- (struct ntreg_sk_record *) ((char *) h->addr + parent_sk_offset);
- sk->refcount = htole32 (le32toh (sk->refcount) + 1);
- nk->sk = htole32 (parent_sk_offset - 0x1000);
-
- /* Inherit parent timestamp. */
- nk->timestamp = parent_nk->timestamp;
-
- /* What I found out the hard way (not documented anywhere): the
- * subkeys in lh-records must be kept sorted. If you just add a
- * subkey in a non-sorted position (eg. just add it at the end) then
- * Windows won't see the subkey _and_ Windows will corrupt the hive
- * itself when it modifies or saves it.
- *
- * So use get_children() to get a list of intermediate
- * lf/lh-records. get_children() returns these in reading order
- * (which is sorted), so we look for the lf/lh-records in sequence
- * until we find the key name just after the one we are inserting,
- * and we insert the subkey just before it.
- *
- * The only other case is the no-subkeys case, where we have to
- * create a brand new lh-record.
- */
- hive_node_h *unused;
- size_t *blocks;
-
- if (get_children (h, parent, &unused, &blocks, 0) == -1)
- return 0;
- free (unused);
-
- size_t i, j;
- size_t nr_subkeys_in_parent_nk = le32toh (parent_nk->nr_subkeys);
- if (nr_subkeys_in_parent_nk == 0) { /* No subkeys case. */
- /* Free up any existing intermediate blocks. */
- for (i = 0; blocks[i] != 0; ++i)
- mark_block_unused (h, blocks[i]);
- size_t lh_offs = new_lh_record (h, name, node);
- if (lh_offs == 0) {
- free (blocks);
- return 0;
- }
-
- /* Recalculate pointers that could have been invalidated by
- * previous call to allocate_block (via new_lh_record).
- */
- nk = (struct ntreg_nk_record *) ((char *) h->addr + node);
- parent_nk = (struct ntreg_nk_record *) ((char *) h->addr + parent);
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_add_child: no keys, allocated new"
- " lh-record at 0x%zx\n", lh_offs);
-
- parent_nk->subkey_lf = htole32 (lh_offs - 0x1000);
- }
- else { /* Insert subkeys case. */
- size_t old_offs = 0, new_offs = 0;
- struct ntreg_lf_record *old_lf = NULL;
-
- /* Find lf/lh key name just after the one we are inserting. */
- for (i = 0; blocks[i] != 0; ++i) {
- if (BLOCK_ID_EQ (h, blocks[i], "lf") ||
- BLOCK_ID_EQ (h, blocks[i], "lh")) {
- old_offs = blocks[i];
- old_lf = (struct ntreg_lf_record *) ((char *) h->addr + old_offs);
- for (j = 0; j < le16toh (old_lf->nr_keys); ++j) {
- hive_node_h nk_offs = le32toh (old_lf->keys[j].offset);
- nk_offs += 0x1000;
- if (compare_name_with_nk_name (h, name, nk_offs) < 0)
- goto insert_it;
- }
- }
- }
-
- /* Insert it at the end.
- * old_offs points to the last lf record, set j.
- */
- assert (old_offs != 0); /* should never happen if nr_subkeys > 0 */
- j = le16toh (old_lf->nr_keys);
-
- /* Insert it. */
- insert_it:
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_add_child: insert key in existing"
- " lh-record at 0x%zx, posn %zu\n", old_offs, j);
-
- new_offs = insert_lf_record (h, old_offs, j, name, node);
- if (new_offs == 0) {
- free (blocks);
- return 0;
- }
-
- /* Recalculate pointers that could have been invalidated by
- * previous call to allocate_block (via insert_lf_record).
- */
- nk = (struct ntreg_nk_record *) ((char *) h->addr + node);
- parent_nk = (struct ntreg_nk_record *) ((char *) h->addr + parent);
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_add_child: new lh-record at 0x%zx\n",
- new_offs);
-
- /* If the lf/lh-record was directly referenced by the parent nk,
- * then update the parent nk.
- */
- if (le32toh (parent_nk->subkey_lf) + 0x1000 == old_offs)
- parent_nk->subkey_lf = htole32 (new_offs - 0x1000);
- /* Else we have to look for the intermediate ri-record and update
- * that in-place.
- */
- else {
- for (i = 0; blocks[i] != 0; ++i) {
- if (BLOCK_ID_EQ (h, blocks[i], "ri")) {
- struct ntreg_ri_record *ri =
- (struct ntreg_ri_record *) ((char *) h->addr + blocks[i]);
- for (j = 0; j < le16toh (ri->nr_offsets); ++j)
- if (le32toh (ri->offset[j] + 0x1000) == old_offs) {
- ri->offset[j] = htole32 (new_offs - 0x1000);
- goto found_it;
- }
- }
- }
-
- /* Not found .. This is an internal error. */
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_add_child: returning ENOTSUP"
- " because could not find ri->lf link\n");
- errno = ENOTSUP;
- free (blocks);
- return 0;
-
- found_it:
- ;
- }
- }
-
- free (blocks);
-
- /* Update nr_subkeys in parent nk. */
- nr_subkeys_in_parent_nk++;
- parent_nk->nr_subkeys = htole32 (nr_subkeys_in_parent_nk);
-
- /* Update max_subkey_name_len in parent nk. */
- uint16_t max = le16toh (parent_nk->max_subkey_name_len);
- if (max < strlen (name) * 2) /* *2 because "recoded" in UTF16-LE. */
- parent_nk->max_subkey_name_len = htole16 (strlen (name) * 2);
-
- return node;
-}
-
-/* Decrement the refcount of an sk-record, and if it reaches zero,
- * unlink it from the chain and delete it.
- */
-static int
-delete_sk (hive_h *h, size_t sk_offset)
-{
- if (!IS_VALID_BLOCK (h, sk_offset) || !BLOCK_ID_EQ (h, sk_offset, "sk")) {
- if (h->msglvl >= 2)
- fprintf (stderr, "delete_sk: not an sk record: 0x%zx\n", sk_offset);
- errno = EFAULT;
- return -1;
- }
-
- struct ntreg_sk_record *sk =
- (struct ntreg_sk_record *) ((char *) h->addr + sk_offset);
-
- if (sk->refcount == 0) {
- if (h->msglvl >= 2)
- fprintf (stderr, "delete_sk: sk record already has refcount 0: 0x%zx\n",
- sk_offset);
- errno = EINVAL;
- return -1;
- }
-
- sk->refcount--;
-
- if (sk->refcount == 0) {
- size_t sk_prev_offset = sk->sk_prev;
- sk_prev_offset += 0x1000;
-
- size_t sk_next_offset = sk->sk_next;
- sk_next_offset += 0x1000;
-
- /* Update sk_prev/sk_next SKs, unless they both point back to this
- * cell in which case we are deleting the last SK.
- */
- if (sk_prev_offset != sk_offset && sk_next_offset != sk_offset) {
- struct ntreg_sk_record *sk_prev =
- (struct ntreg_sk_record *) ((char *) h->addr + sk_prev_offset);
- struct ntreg_sk_record *sk_next =
- (struct ntreg_sk_record *) ((char *) h->addr + sk_next_offset);
-
- sk_prev->sk_next = htole32 (sk_next_offset - 0x1000);
- sk_next->sk_prev = htole32 (sk_prev_offset - 0x1000);
- }
-
- /* Refcount is zero so really delete this block. */
- mark_block_unused (h, sk_offset);
- }
-
- return 0;
-}
-
-/* Callback from hivex_node_delete_child which is called to delete a
- * node AFTER its subnodes have been visited. The subnodes have been
- * deleted but we still have to delete any lf/lh/li/ri records and the
- * value list block and values, followed by deleting the node itself.
- */
-static int
-delete_node (hive_h *h, void *opaque, hive_node_h node, const char *name)
-{
- /* Get the intermediate blocks. The subkeys have already been
- * deleted by this point, so tell get_children() not to check for
- * validity of the nk-records.
- */
- hive_node_h *unused;
- size_t *blocks;
- if (get_children (h, node, &unused, &blocks, GET_CHILDREN_NO_CHECK_NK) == -1)
- return -1;
- free (unused);
-
- /* We don't care what's in these intermediate blocks, so we can just
- * delete them unconditionally.
- */
- size_t i;
- for (i = 0; blocks[i] != 0; ++i)
- mark_block_unused (h, blocks[i]);
-
- free (blocks);
-
- /* Delete the values in the node. */
- if (delete_values (h, node) == -1)
- return -1;
-
- struct ntreg_nk_record *nk =
- (struct ntreg_nk_record *) ((char *) h->addr + node);
-
- /* If the NK references an SK, delete it. */
- size_t sk_offs = le32toh (nk->sk);
- if (sk_offs != 0xffffffff) {
- sk_offs += 0x1000;
- if (delete_sk (h, sk_offs) == -1)
- return -1;
- nk->sk = htole32 (0xffffffff);
- }
-
- /* If the NK references a classname, delete it. */
- size_t cl_offs = le32toh (nk->classname);
- if (cl_offs != 0xffffffff) {
- cl_offs += 0x1000;
- mark_block_unused (h, cl_offs);
- nk->classname = htole32 (0xffffffff);
- }
-
- /* Delete the node itself. */
- mark_block_unused (h, node);
-
- return 0;
-}
-
-int
-hivex_node_delete_child (hive_h *h, hive_node_h node)
-{
- if (!h->writable) {
- errno = EROFS;
- return -1;
- }
-
- if (!IS_VALID_BLOCK (h, node) || !BLOCK_ID_EQ (h, node, "nk")) {
- errno = EINVAL;
- return -1;
- }
-
- if (node == hivex_root (h)) {
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_delete_child: cannot delete root node\n");
- errno = EINVAL;
- return -1;
- }
-
- hive_node_h parent = hivex_node_parent (h, node);
- if (parent == 0)
- return -1;
-
- /* Delete node and all its children and values recursively. */
- static const struct hivex_visitor visitor = { .node_end = delete_node };
- if (hivex_visit_node (h, node, &visitor, sizeof visitor, NULL, 0) == -1)
- return -1;
-
- /* Delete the link from parent to child. We need to find the lf/lh
- * record which contains the offset and remove the offset from that
- * record, then decrement the element count in that record, and
- * decrement the overall number of subkeys stored in the parent
- * node.
- */
- hive_node_h *unused;
- size_t *blocks;
- if (get_children (h, parent, &unused, &blocks, GET_CHILDREN_NO_CHECK_NK)== -1)
- return -1;
- free (unused);
-
- size_t i, j;
- for (i = 0; blocks[i] != 0; ++i) {
- struct ntreg_hbin_block *block =
- (struct ntreg_hbin_block *) ((char *) h->addr + blocks[i]);
-
- if (block->id[0] == 'l' && (block->id[1] == 'f' || block->id[1] == 'h')) {
- struct ntreg_lf_record *lf = (struct ntreg_lf_record *) block;
-
- size_t nr_subkeys_in_lf = le16toh (lf->nr_keys);
-
- for (j = 0; j < nr_subkeys_in_lf; ++j)
- if (le32toh (lf->keys[j].offset) + 0x1000 == node) {
- for (; j < nr_subkeys_in_lf - 1; ++j)
- memcpy (&lf->keys[j], &lf->keys[j+1], sizeof (lf->keys[j]));
- lf->nr_keys = htole16 (nr_subkeys_in_lf - 1);
- goto found;
- }
- }
- }
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_delete_child: could not find parent"
- " to child link\n");
- errno = ENOTSUP;
- return -1;
-
- found:;
- struct ntreg_nk_record *nk =
- (struct ntreg_nk_record *) ((char *) h->addr + parent);
- size_t nr_subkeys_in_nk = le32toh (nk->nr_subkeys);
- nk->nr_subkeys = htole32 (nr_subkeys_in_nk - 1);
-
- if (h->msglvl >= 2)
- fprintf (stderr, "hivex_node_delete_child: updating nr_subkeys"
- " in parent 0x%zx to %zu\n", parent, nr_subkeys_in_nk);
-
- return 0;
-}
-
-int
-hivex_node_set_values (hive_h *h, hive_node_h node,
- size_t nr_values, const hive_set_value *values,
- int flags)
-{
- if (!h->writable) {
- errno = EROFS;
- return -1;
- }
-
- if (!IS_VALID_BLOCK (h, node) || !BLOCK_ID_EQ (h, node, "nk")) {
- errno = EINVAL;
- return -1;
- }
-
- /* Delete all existing values. */
- if (delete_values (h, node) == -1)
- return -1;
-
- if (nr_values == 0)
- return 0;
-
- /* Allocate value list node. Value lists have no id field. */
- static const char nul_id[2] = { 0, 0 };
- size_t seg_len =
- sizeof (struct ntreg_value_list) + (nr_values - 1) * sizeof (uint32_t);
- size_t vallist_offs = allocate_block (h, seg_len, nul_id);
- if (vallist_offs == 0)
- return -1;
-
- struct ntreg_nk_record *nk =
- (struct ntreg_nk_record *) ((char *) h->addr + node);
- nk->nr_values = htole32 (nr_values);
- nk->vallist = htole32 (vallist_offs - 0x1000);
-
- struct ntreg_value_list *vallist =
- (struct ntreg_value_list *) ((char *) h->addr + vallist_offs);
-
- size_t i;
- for (i = 0; i < nr_values; ++i) {
- /* Allocate vk record to store this (key, value) pair. */
- static const char vk_id[2] = { 'v', 'k' };
- seg_len = sizeof (struct ntreg_vk_record) + strlen (values[i].key);
- size_t vk_offs = allocate_block (h, seg_len, vk_id);
- if (vk_offs == 0)
- return -1;
-
- /* Recalculate pointers that could have been invalidated by
- * previous call to allocate_block.
- */
- nk = (struct ntreg_nk_record *) ((char *) h->addr + node);
- vallist = (struct ntreg_value_list *) ((char *) h->addr + vallist_offs);
-
- vallist->offset[i] = htole32 (vk_offs - 0x1000);
-
- struct ntreg_vk_record *vk =
- (struct ntreg_vk_record *) ((char *) h->addr + vk_offs);
- size_t name_len = strlen (values[i].key);
- vk->name_len = htole16 (name_len);
- strcpy (vk->name, values[i].key);
- vk->data_type = htole32 (values[i].t);
- uint32_t len = values[i].len;
- if (len <= 4) /* store it inline => set MSB flag */
- len |= 0x80000000;
- vk->data_len = htole32 (len);
- vk->flags = name_len == 0 ? 0 : 1;
-
- if (values[i].len <= 4) /* store it inline */
- memcpy (&vk->data_offset, values[i].value, values[i].len);
- else {
- size_t offs = allocate_block (h, values[i].len + 4, nul_id);
- if (offs == 0)
- return -1;
-
- /* Recalculate pointers that could have been invalidated by
- * previous call to allocate_block.
- */
- nk = (struct ntreg_nk_record *) ((char *) h->addr + node);
- vallist = (struct ntreg_value_list *) ((char *) h->addr + vallist_offs);
- vk = (struct ntreg_vk_record *) ((char *) h->addr + vk_offs);
-
- memcpy ((char *) h->addr + offs + 4, values[i].value, values[i].len);
- vk->data_offset = htole32 (offs - 0x1000);
- }
-
- if (name_len * 2 > le32toh (nk->max_vk_name_len))
- /* * 2 for UTF16-LE "reencoding" */
- nk->max_vk_name_len = htole32 (name_len * 2);
- if (values[i].len > le32toh (nk->max_vk_data_len))
- nk->max_vk_data_len = htole32 (values[i].len);
- }
-
- return 0;
-}
-
-int
-hivex_node_set_value (hive_h *h, hive_node_h node,
- const hive_set_value *val, int flags)
-{
- int retval = -1;
- hive_value_h *prev_values;
- hive_set_value *new_values;
- size_t nr_values;
- size_t i;
- ssize_t idx_of_val;
-
- prev_values = hivex_node_values (h, node);
- if (prev_values == NULL)
- return -1;
-
- /* Count number of existing values in this node. */
- nr_values = 0;
- for (i = 0; prev_values[i] != 0; i++)
- nr_values++;
-
- /* Allocate a new hive_set_value list, with space for all existing
- * values, plus 1 (for the new key if we're not replacing an
- * existing key).
- */
- new_values = calloc (nr_values + 1, sizeof (hive_set_value));
- if (new_values == NULL)
- goto out1;
-
- /* Copy the old values to the new values. If we find the key along
- * the way, note its index in 'idx_of_val'.
- */
- idx_of_val = -1;
- for (i = 0; prev_values[i] != 0; i++) {
- size_t len;
- hive_type t;
- char *valkey, *valval;
-
- valval = hivex_value_value (h, prev_values[i], &t, &len);
- if (valval == NULL) goto out2;
-
- new_values[i].value = valval;
- new_values[i].t = t;
- new_values[i].len = len;
-
- valkey = hivex_value_key (h, prev_values[i]);
- if (valkey == NULL) goto out2;
-
- new_values[i].key = valkey;
-
- if (STRCASEEQ (valkey, val->key))
- idx_of_val = i;
- }
-
- if (idx_of_val > -1) {
- free (new_values[idx_of_val].key);
- free (new_values[idx_of_val].value);
- } else { /* insert it at the end */
- idx_of_val = nr_values;
- nr_values++;
- }
-
- new_values[idx_of_val].key = strdup (val->key);
- new_values[idx_of_val].value = malloc (val->len);
- new_values[idx_of_val].len = val->len;
- new_values[idx_of_val].t = val->t;
-
- if (new_values[idx_of_val].key == NULL ||
- new_values[idx_of_val].value == NULL)
- goto out2;
- memcpy (new_values[idx_of_val].value, val->value, val->len);
-
- retval = hivex_node_set_values (h, node, nr_values, new_values, 0);
-
- out2:
- for (i = 0; i < nr_values; ++i) {
- free (new_values[i].key);
- free (new_values[i].value);
- }
- free (new_values);
-
- out1:
- free (prev_values);
-
- return retval;
-}
diff --git a/trunk/hivex/lib/mmap.c b/trunk/hivex/lib/mmap.c
deleted file mode 100644
index c68ec32..0000000
--- a/trunk/hivex/lib/mmap.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* mmap replacement for mingw.
- *
- * Copyright (C) 2011 by Daniel Gillen <gillen (dot) dan (at) pinguin (dot) lu>
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation;
- * version 2.1 of the License.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- */
-
-#include "hivex.h"
-#include "hivex-internal.h"
-#include "mmap.h"
-
-#include <windows.h>
-#include <io.h>
-
-void *
-hivex__rpl_mmap (hive_h *h,
- void *p_addr, size_t len, int prot, int flags, int fd, off_t offset)
-{
- void *p_map;
-
- // Check parameters for unsupported values
- if (p_addr != NULL)
- return MAP_FAILED;
- if (prot != PROT_READ)
- return MAP_FAILED;
- if (flags != MAP_SHARED)
- return MAP_FAILED;
-
- // Create file mapping
- h->p_winmap = CreateFileMapping ((HANDLE)_get_osfhandle(fd),
- NULL, PAGE_READONLY, 0, 0, NULL);
- if (h->p_winmap == NULL)
- return MAP_FAILED;
-
- // Create map view
- p_map = MapViewOfFile (h->p_winmap, FILE_MAP_READ, 0, 0, len);
- if (p_map == NULL) {
- CloseHandle (h->p_winmap);
- return MAP_FAILED;
- }
-
- return p_map;
-}
-
-int
-hivex__rpl_munmap (hive_h *h, void *p_addr, size_t len)
-{
- if (p_addr == NULL || h->p_winmap == NULL)
- return -1;
-
- // Close map view
- if (UnmapViewOfFile (p_addr) == 0)
- return -1;
-
- // Close file mapping
- if (CloseHandle (h->p_winmap) == 0)
- return -1;
-
- h->p_winmap = NULL;
- return 0;
-}
diff --git a/trunk/hivex/lib/mmap.h b/trunk/hivex/lib/mmap.h
deleted file mode 100644
index 0a693f3..0000000
--- a/trunk/hivex/lib/mmap.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* mmap replacement for mingw.
- *
- * Copyright (C) 2011 by Daniel Gillen <gillen (dot) dan (at) pinguin (dot) lu>
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation;
- * version 2.1 of the License.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- */
-
-#ifndef HIVEX_MMAP_H_
-#define HIVEX_MMAP_H_
-
-#include <stdlib.h>
-#include <sys/types.h>
-
-#include "hivex.h"
-#include "hivex-internal.h"
-
-/* Hack to pass the hive handle to the replacement mmap and munmap
- * functions. XXX
- */
-#define mmap(a,b,c,d,e,f) hivex__rpl_mmap(h,(a),(b),(c),(d),(e),(f))
-#define munmap(a,b) hivex__rpl_munmap(h,(a),(b))
-
-// Supported map protections.
-#define PROT_READ 0x1 /* Page can be read. */
-
-// Supported sharing types (must choose one and only one of these).
-#define MAP_SHARED 0x01 /* Share changes. */
-
-// Value that is returned when mapping failed
-#define MAP_FAILED NULL
-
-/*
- * hivex replacement mmap
- *
- * Parameters:
- * h : Hive handle
- * void *p_addr : Preferred starting address for the mapping. Unsupported
- * and must be NULL.
- * size_t len : Mapping length (From offset to offset+len-1).
- * int prot : Flags that control what kind of access is permitted.
- * Must be PROT_READ.
- * int flags : Flags that control the nature of the map. Must be
- * MAP_SHARED.
- * int fd : File descriptor of file to be mapped.
- * off_t offset : Mapping offset.
- *
- * Returns:
- * Map address on success or MAP_FAILED on error.
- */
-extern void *hivex__rpl_mmap (hive_h *h, void *p_addr, size_t len, int prot, int flags, int fd, off_t offset);
-
-/*
- * hivex replacement munmap
- *
- * Parameters:
- * h : Hive handle
- * void *p_addr : Startaddress of mapping created with mmap
- * size_t len : Lenght of mapping to be unmapped. Unsupported. The whole
- * mapping will always be unmapped.
- *
- * Returns:
- * 0 on success or -1 on error.
- */
-extern int hivex__rpl_munmap (hive_h *h, void *p_addr, size_t len);
-
-#endif /* HIVEX_MMAP_H_ */
diff --git a/trunk/hivex/lib/test-just-header.c b/trunk/hivex/lib/test-just-header.c
deleted file mode 100644
index 5b8129f..0000000
--- a/trunk/hivex/lib/test-just-header.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* hivex
- * Copyright (C) 2010-2011 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/* Check that just including the header and nothing else works, ie.
- * that there are no implicit dependencies in the header file.
- */
-
-#include "hivex.h"
-
-int
-main (int argc, char *argv[])
-{
- hive_h *h = hivex_open ("../images/minimal", 0);
- return h == h ? 0 : 1;
-}
diff --git a/trunk/hivex/lib/tools/Makefile.am b/trunk/hivex/lib/tools/Makefile.am
deleted file mode 100644
index bd8e986..0000000
--- a/trunk/hivex/lib/tools/Makefile.am
+++ /dev/null
@@ -1,56 +0,0 @@
-# libguestfs
-# Copyright (C) 2009 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# OCaml Windows Registry visualizer. This was used while reverse
-# engineering the hive format, and is not normally compiled. If you
-# do with to compile it, you'll need ocaml-bitstring-devel and
-# ocaml-extlib-devel. Also you'll need a collection of hive files
-# from Windows machines to experiment with.
-#
-# We use '-w y' (disable unused variable warnings) because these
-# warnings aren't very reliable with heavily preprocessed code like
-# that produced by bitstring.
-
-EXTRA_DIST = \
- visualizer.ml \
- visualizer_utils.ml \
- visualizer_NT_time.ml \
- clearheaderfields.ml \
- fillemptyhbins.ml \
- truncatefile.ml \
- counter.mli \
- counter.ml
-
-visualizer.opt: counter.mli counter.ml visualizer_utils.ml visualizer_NT_time.ml visualizer.ml
- ocamlfind ocamlopt -w y \
- -package bitstring,bitstring.syntax,extlib \
- -syntax camlp4 -linkpkg $^ -o $@
-
-fillemptyhbins.opt: fillemptyhbins.ml
- ocamlfind ocamlopt -w y \
- -package bitstring,bitstring.syntax,extlib \
- -syntax camlp4 -linkpkg $^ -o $@
-
-clearheaderfields.opt: visualizer_utils.ml clearheaderfields.ml
- ocamlfind ocamlopt -w y \
- -package bitstring,bitstring.syntax,extlib \
- -syntax camlp4 -linkpkg $^ -o $@
-
-truncatefile.opt: visualizer_utils.ml truncatefile.ml
- ocamlfind ocamlopt -w y \
- -package bitstring,bitstring.syntax,extlib \
- -syntax camlp4 -linkpkg $^ -o $@
diff --git a/trunk/hivex/lib/tools/clearheaderfields.ml b/trunk/hivex/lib/tools/clearheaderfields.ml
deleted file mode 100644
index d055553..0000000
--- a/trunk/hivex/lib/tools/clearheaderfields.ml
+++ /dev/null
@@ -1,112 +0,0 @@
-(* Windows Registry reverse-engineering tool.
- * Copyright (C) 2010 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *)
-
-open Bitstring
-open ExtString
-open Printf
-open Visualizer_utils
-
-let () =
- if Array.length Sys.argv <> 2 then (
- eprintf "Error: missing argument.
-Usage: %s hivefile
-" Sys.executable_name;
- exit 1
- )
-
-let filename = Sys.argv.(1)
-
-(* Load the file. *)
-let bits = bitstring_of_file filename
-
-(* Split into header + data at the 4KB boundary. *)
-let header, data = takebits (4096 * 8) bits, dropbits (4096 * 8) bits
-
-(* Read the header fields. *)
-let seq, last_modified, major, minor, unknown1, unknown2,
- root_key, end_pages, unknown3, fname =
- bitmatch header with
- | { "regf" : 4*8 : string;
- seq1 : 4*8 : littleendian;
- seq2 : 4*8 : littleendian;
- last_modified : 64 : bitstring;
- major : 4*8 : littleendian;
- minor : 4*8 : littleendian;
- unknown1 : 4*8 : littleendian;
- unknown2 : 4*8 : littleendian;
- root_key : 4*8 : littleendian;
- end_pages : 4*8 : littleendian;
- unknown3 : 4*8 : littleendian;
- fname : 64*8 : string;
- unknownguid1 : 16*8 : bitstring;
- unknownguid2 : 16*8 : bitstring;
- unknown4 : 4*8 : littleendian;
- unknownguid3 : 16*8 : bitstring;
- unknown5 : 4*8 : string;
- unknown6 : 340*8 : bitstring;
- csum : 4*8
- : littleendian, save_offset_to (crc_offset),
- check (assert (crc_offset = 0x1fc * 8); true);
- unknown7 : (0x1000-0x200)*8 : bitstring } ->
- seq1, last_modified, major, minor, unknown1, unknown2,
- root_key, end_pages, unknown3, fname
- | {_} -> assert false
-
-(* Create a new header, but with unknown fields cleared. Do it in
- * two parts, first creating everything up to the checksum, then
- * calculating the checksum and appending checksum and the final
- * field.
- *)
-let header =
- let zeroguid = zeroes_bitstring (16*8) in
- let before_csum =
- BITSTRING {
- "regf" : 4*8 : string;
- seq : 4*8 : littleendian;
- seq : 4*8 : littleendian;
- last_modified : 64 : bitstring;
- major : 4*8 : littleendian;
- minor : 4*8 : littleendian;
- unknown1 : 4*8 : littleendian;
- unknown2 : 4*8 : littleendian;
- root_key : 4*8 : littleendian;
- end_pages : 4*8 : littleendian;
- unknown3 : 4*8 : littleendian;
- fname : 64*8 : string;
- zeroguid : 16*8 : bitstring;
- zeroguid : 16*8 : bitstring;
- 0_l : 4*8 : littleendian;
- zeroguid : 16*8 : bitstring;
- 0_l : 4*8 : littleendian;
- zeroes_bitstring (340*8) : 340*8 : bitstring
- } in
- assert (bitstring_length before_csum = 0x1fc * 8);
- let csum = bitstring_fold_left_int32_le Int32.logxor 0_l before_csum in
- let csum_and_after =
- BITSTRING {
- csum : 4*8 : littleendian;
- zeroes_bitstring ((0x1000-0x200)*8) : (0x1000-0x200)*8 : bitstring
- } in
- let new_header = concat [before_csum; csum_and_after] in
- assert (bitstring_length header = bitstring_length new_header);
- new_header
-
-(* Write it. *)
-let () =
- let file = concat [header; data] in
- bitstring_to_file file filename
diff --git a/trunk/hivex/lib/tools/counter.ml b/trunk/hivex/lib/tools/counter.ml
deleted file mode 100644
index 2e44c65..0000000
--- a/trunk/hivex/lib/tools/counter.ml
+++ /dev/null
@@ -1,86 +0,0 @@
-(* Basic counting module.
-
- Copyright (C) 2006 Merjis Ltd.
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2 of the License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with this library; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-*)
-
-type 'a t = ('a, int ref) Hashtbl.t
-
-let create () =
- Hashtbl.create 13
-
-let get_ref counter thing =
- try
- Hashtbl.find counter thing
- with
- Not_found ->
- let r = ref 0 in
- Hashtbl.add counter thing r;
- r
-
-let incr counter thing =
- let r = get_ref counter thing in
- incr r
-
-let decr counter thing =
- let r = get_ref counter thing in
- decr r
-
-let add counter thing n =
- let r = get_ref counter thing in
- r := !r + n
-
-let sub counter thing n =
- let r = get_ref counter thing in
- r := !r - n
-
-let set counter thing n =
- let r = get_ref counter thing in
- r := n
-
-(* Don't use get_ref, to avoid unnecessarily creating 'ref 0's. *)
-let get counter thing =
- try
- !(Hashtbl.find counter thing)
- with
- Not_found -> 0
-
-(* This is a common pair of operations, worth optimising. *)
-let incr_get counter thing =
- let r = get_ref counter thing in
- Pervasives.incr r;
- !r
-
-let zero = Hashtbl.remove
-
-let read counter =
- let counts =
- Hashtbl.fold (
- fun thing r xs ->
- let r = !r in
- if r <> 0 then (r, thing) :: xs
- else xs
- ) counter [] in
- List.sort (fun (a, _) (b, _) -> compare (b : int) (a : int)) counts
-
-let length = Hashtbl.length
-
-let total counter =
- let total = ref 0 in
- Hashtbl.iter (fun _ r -> total := !total + !r) counter;
- !total
-
-let clear = Hashtbl.clear
diff --git a/trunk/hivex/lib/tools/counter.mli b/trunk/hivex/lib/tools/counter.mli
deleted file mode 100644
index 87610b5..0000000
--- a/trunk/hivex/lib/tools/counter.mli
+++ /dev/null
@@ -1,69 +0,0 @@
-(** Basic counting module.
-
- Copyright (C) 2006 Merjis Ltd.
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2 of the License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with this library; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-*)
-
-type 'a t
-(** Count items of type ['a]. *)
-
-val create : unit -> 'a t
-(** Create a new counter. *)
-
-val incr : 'a t -> 'a -> unit
-(** [incr counter thing] adds one to the count of [thing]s in [counter]. *)
-
-val decr : 'a t -> 'a -> unit
-(** [decr counter thing] subtracts one to the count of [thing]s in [counter]. *)
-
-val add : 'a t -> 'a -> int -> unit
-(** [add counter thing n] adds [n] to the count of [thing]s in [counter]. *)
-
-val sub : 'a t -> 'a -> int -> unit
-(** [sub counter thing n] subtracts [n] to the count of [thing]s in [counter]. *)
-
-val set : 'a t -> 'a -> int -> unit
-(** [set counter thing n] sets the count of [thing]s to [n]. *)
-
-val get : 'a t -> 'a -> int
-(** [get counter thing] returns the count of [thing]s. (Returns 0 for
- * [thing]s which have not been added.
- *)
-
-val incr_get : 'a t -> 'a -> int
-(** Faster form of {!Counter.incr} followed by {!Counter.get}. *)
-
-val zero : 'a t -> 'a -> unit
-(** [zero counter thing] sets the count of [thing]s to 0.
- * See also {!Counter.clear}.
- *)
-
-val read : 'a t -> (int * 'a) list
-(** [read counter] reads the frequency of each thing. They are sorted
- * with the thing appearing most frequently first. Only things occurring
- * non-zero times are returned.
- *)
-
-val length : 'a t -> int
-(** Return the number of distinct things. See also {!Counter.total} *)
-
-val total : 'a t -> int
-(** Return the number of things counted (the total number of counts).
- * See also {!Counter.length}
- *)
-
-val clear : 'a t -> unit
-(** [clear counter] zeroes all counts. *)
diff --git a/trunk/hivex/lib/tools/fillemptyhbins.ml b/trunk/hivex/lib/tools/fillemptyhbins.ml
deleted file mode 100644
index 14eae96..0000000
--- a/trunk/hivex/lib/tools/fillemptyhbins.ml
+++ /dev/null
@@ -1,74 +0,0 @@
-(* Windows Registry reverse-engineering tool.
- * Copyright (C) 2010 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *)
-
-open Bitstring
-open ExtString
-open Printf
-
-let () =
- if Array.length Sys.argv <> 3 then (
- eprintf "Error: missing argument.
-Usage: %s hivefile startoffset
-" Sys.executable_name;
- exit 1
- )
-
-let filename = Sys.argv.(1)
-let offset = int_of_string Sys.argv.(2)
-
-(* Load the file. *)
-let bits = bitstring_of_file filename
-
-(* Split into header + data at the 4KB boundary. *)
-let header, data = takebits (4096 * 8) bits, dropbits (4096 * 8) bits
-
-(* Overwrite everything after @offset, so ... *)
-let nrpages = (bitstring_length data / 8 - offset) / 4096
-let data = takebits (offset * 8) data
-
-(* Create the empty pages. They're not all the same because each
- * page contains its own page_offset.
- *)
-let pages =
- let noblock =
- let seg_len = 4096 - 32 in
- let zeroes = zeroes_bitstring ((seg_len - 4) * 8) in
- BITSTRING {
- Int32.of_int seg_len : 4*8 : littleendian;
- zeroes : (seg_len - 4) * 8 : bitstring
- } in
- let zeroes = zeroes_bitstring (20*8) in
- let rec loop page_offset i =
- if i < nrpages then (
- let page =
- BITSTRING {
- "hbin" : 4*8 : string;
- Int32.of_int page_offset : 4*8 : littleendian;
- 4096_l : 4*8 : littleendian; (* page length *)
- zeroes : 20*8 : bitstring;
- noblock : (4096 - 32) * 8 : bitstring
- } in
- page :: loop (page_offset + 4096) (i+1)
- ) else []
- in
- loop offset 0
-
-(* Write it. *)
-let () =
- let file = concat (header :: data :: pages) in
- bitstring_to_file file filename
diff --git a/trunk/hivex/lib/tools/truncatefile.ml b/trunk/hivex/lib/tools/truncatefile.ml
deleted file mode 100644
index b519f7a..0000000
--- a/trunk/hivex/lib/tools/truncatefile.ml
+++ /dev/null
@@ -1,112 +0,0 @@
-(* Windows Registry reverse-engineering tool.
- * Copyright (C) 2010 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *)
-
-open Bitstring
-open ExtString
-open Printf
-open Visualizer_utils
-
-let () =
- if Array.length Sys.argv <> 3 then (
- eprintf "Error: missing argument.
-Usage: %s hivefile endpages
-" Sys.executable_name;
- exit 1
- )
-
-let filename = Sys.argv.(1)
-let new_end_pages = int_of_string Sys.argv.(2)
-
-(* Load the file. *)
-let bits = bitstring_of_file filename
-
-(* Split into header + data at the 4KB boundary. *)
-let header, data = takebits (4096 * 8) bits, dropbits (4096 * 8) bits
-
-(* Truncate the file data. *)
-let data = takebits (new_end_pages * 8) data
-
-(* Read the header fields. *)
-let seq, last_modified, major, minor, unknown1, unknown2,
- root_key, end_pages, unknown3, fname =
- bitmatch header with
- | { "regf" : 4*8 : string;
- seq1 : 4*8 : littleendian;
- seq2 : 4*8 : littleendian;
- last_modified : 64 : bitstring;
- major : 4*8 : littleendian;
- minor : 4*8 : littleendian;
- unknown1 : 4*8 : littleendian;
- unknown2 : 4*8 : littleendian;
- root_key : 4*8 : littleendian;
- end_pages : 4*8 : littleendian;
- unknown3 : 4*8 : littleendian;
- fname : 64*8 : string;
- unknownguid1 : 16*8 : bitstring;
- unknownguid2 : 16*8 : bitstring;
- unknown4 : 4*8 : littleendian;
- unknownguid3 : 16*8 : bitstring;
- unknown5 : 4*8 : string;
- unknown6 : 340*8 : bitstring;
- csum : 4*8
- : littleendian, save_offset_to (crc_offset),
- check (assert (crc_offset = 0x1fc * 8); true);
- unknown7 : (0x1000-0x200)*8 : bitstring } ->
- seq1, last_modified, major, minor, unknown1, unknown2,
- root_key, end_pages, unknown3, fname
- | {_} -> assert false
-
-(* Create a new header, with endpages updated. *)
-let header =
- let zeroguid = zeroes_bitstring (16*8) in
- let before_csum =
- BITSTRING {
- "regf" : 4*8 : string;
- seq : 4*8 : littleendian;
- seq : 4*8 : littleendian;
- last_modified : 64 : bitstring;
- major : 4*8 : littleendian;
- minor : 4*8 : littleendian;
- unknown1 : 4*8 : littleendian;
- unknown2 : 4*8 : littleendian;
- root_key : 4*8 : littleendian;
- Int32.of_int new_end_pages : 4*8 : littleendian;
- unknown3 : 4*8 : littleendian;
- fname : 64*8 : string;
- zeroguid : 16*8 : bitstring;
- zeroguid : 16*8 : bitstring;
- 0_l : 4*8 : littleendian;
- zeroguid : 16*8 : bitstring;
- 0_l : 4*8 : littleendian;
- zeroes_bitstring (340*8) : 340*8 : bitstring
- } in
- assert (bitstring_length before_csum = 0x1fc * 8);
- let csum = bitstring_fold_left_int32_le Int32.logxor 0_l before_csum in
- let csum_and_after =
- BITSTRING {
- csum : 4*8 : littleendian;
- zeroes_bitstring ((0x1000-0x200)*8) : (0x1000-0x200)*8 : bitstring
- } in
- let new_header = concat [before_csum; csum_and_after] in
- assert (bitstring_length header = bitstring_length new_header);
- new_header
-
-(* Write it. *)
-let () =
- let file = concat [header; data] in
- bitstring_to_file file filename
diff --git a/trunk/hivex/lib/tools/visualizer.ml b/trunk/hivex/lib/tools/visualizer.ml
deleted file mode 100644
index cc71748..0000000
--- a/trunk/hivex/lib/tools/visualizer.ml
+++ /dev/null
@@ -1,984 +0,0 @@
-(* Windows Registry reverse-engineering tool.
- * Copyright (C) 2010 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * For existing information on the registry format, please refer
- * to the following documents. Note they are both incomplete
- * and inaccurate in some respects.
- *
- * http://www.sentinelchicken.com/data/TheWindowsNTRegistryFileFormat.pdf
- * http://pogostick.net/~pnh/ntpasswd/WinReg.txt
- *)
-
-open Bitstring
-open ExtString
-open Printf
-open Visualizer_utils
-open Visualizer_NT_time
-
-let () =
- if Array.length Sys.argv <> 2 then (
- eprintf "Error: missing argument.
-Usage: %s hivefile > out
-where
- 'hivefile' is the input hive file from a Windows machine
- 'out' is an output file where we will write all the keys,
- values etc for extended debugging purposes.
-Errors, inconsistencies and unexpected fields in the hive file
-are written to stderr.
-" Sys.executable_name;
- exit 1
- )
-
-let filename = Sys.argv.(1)
-let basename = Filename.basename filename
-
-(* Load the file. *)
-let bits = bitstring_of_file filename
-
-(* Split into header + data at the 4KB boundary. *)
-let header, data = takebits (4096 * 8) bits, dropbits (4096 * 8) bits
-
-(* Define a persistent pattern which matches the header fields. By
- * using persistent patterns, we can reuse them later in the
- * program.
- *)
-let bitmatch header_fields =
- { "regf" : 4*8 : string;
- seq1 : 4*8 : littleendian;
- seq2 : 4*8 : littleendian;
- last_modified : 64
- : littleendian, bind (nt_to_time_t last_modified);
- major : 4*8 : littleendian;
- minor : 4*8 : littleendian;
-
- (* "Type". Contains 0. *)
- unknown1 : 4*8 : littleendian;
-
- (* "Format". Contains 1. *)
- unknown2 : 4*8 : littleendian;
-
- root_key : 4*8
- : littleendian, bind (get_offset root_key);
- end_pages : 4*8
- : littleendian, bind (get_offset end_pages);
-
- (* "Cluster". Contains 1. *)
- unknown3 : 4*8 : littleendian;
-
- filename : 64*8 : string;
-
- (* All three GUIDs here confirmed in Windows 7 registries. In
- * Windows <= 2003 these GUID fields seem to contain junk.
- *
- * If you write zeroes to the GUID fields, load and unload in Win7
- * REGEDIT, then Windows 7 writes some random GUIDs.
- *
- * Also (on Win7) unknownguid1 == unknownguid2. unknownguid3 is
- * different.
- *)
- unknownguid1 : 16*8 : bitstring;
- unknownguid2 : 16*8 : bitstring;
-
- (* Wrote zero to unknown4, loaded and unloaded it in Win7 REGEDIT,
- * and it still contained zero. In existing registries it seems to
- * contain random junk.
- *)
- unknown4 : 4*8 : littleendian;
- unknownguid3 : 16*8 : bitstring;
-
- (* If you write zero to unknown5, load and unload it in REGEDIT,
- * Windows 7 puts the string "rmtm" here. Existing registries also
- * seen containing this string. However on older Windows it can
- * be all zeroes.
- *)
- unknown5 : 4*8 : string;
-
- (* This seems to contain junk from other parts of the registry. I
- * wrote zeroes here, loaded and unloaded it in Win7 REGEDIT, and
- * it still contained zeroes.
- *)
- unknown6 : 340*8 : bitstring;
- csum : 4*8
- : littleendian, save_offset_to (crc_offset),
- check (assert (crc_offset = 0x1fc * 8); true);
- unknown7 : (0x1000-0x200)*8 : bitstring }
-
-let fprintf_header chan bits =
- bitmatch bits with
- | { :header_fields } ->
- fprintf chan
- "HD %6ld %6ld %s %ld.%ld %08lx %08lx %s %s %08lx %s %s %s %08lx %s %s %s %08lx %s\n"
- seq1 seq2 (print_time last_modified) major minor
- unknown1 unknown2
- (print_offset root_key) (print_offset end_pages)
- unknown3 (print_utf16 filename)
- (print_guid unknownguid1) (print_guid unknownguid2)
- unknown4 (print_guid unknownguid3) unknown5
- (print_bitstring unknown6)
- csum (print_bitstring unknown7)
-
-(* Parse the header and check it. *)
-let root_key, end_pages =
- bitmatch header with
- | { :header_fields } ->
- fprintf_header stdout header;
-
- if major <> 1_l then
- eprintf "HD hive file major <> 1 (major.minor = %ld.%ld)\n"
- major minor;
- if seq1 <> seq2 then
- eprintf "HD hive file sequence numbers should match (%ld <> %ld)\n"
- seq1 seq2;
- if unknown1 <> 0_l then
- eprintf "HD unknown1 field <> 0 (%08lx)\n" unknown1;
- if unknown2 <> 1_l then
- eprintf "HD unknown2 field <> 1 (%08lx)\n" unknown2;
- if unknown3 <> 1_l then
- eprintf "HD unknown3 field <> 1 (%08lx)\n" unknown3;
- if not (equals unknownguid1 unknownguid2) then
- eprintf "HD unknownguid1 <> unknownguid2 (%s, %s)\n"
- (print_guid unknownguid1) (print_guid unknownguid2);
- (* We think this is junk.
- if unknown4 <> 0_l then
- eprintf "HD unknown4 field <> 0 (%08lx)\n" unknown4;
- *)
- if unknown5 <> "rmtm" && unknown5 <> "\000\000\000\000" then
- eprintf "HD unknown5 field <> \"rmtm\" & <> zeroes (%s)\n" unknown5;
- (* We think this is junk.
- if not (is_zero_bitstring unknown6) then
- eprintf "HD unknown6 area is not zero (%s)\n"
- (print_bitstring unknown6);
- *)
- if not (is_zero_bitstring unknown7) then
- eprintf "HD unknown7 area is not zero (%s)\n"
- (print_bitstring unknown7);
-
- root_key, end_pages
- | {_} ->
- failwithf "%s: this doesn't look like a registry hive file\n" basename
-
-(* Define persistent patterns to match page and block fields. *)
-let bitmatch page_fields =
- { "hbin" : 4*8 : string;
- page_offset : 4*8
- : littleendian, bind (get_offset page_offset);
- page_size : 4*8
- : littleendian, check (Int32.rem page_size 4096_l = 0_l),
- bind (Int32.to_int page_size);
-
- (* In the first hbin in the file these fields contain something.
- * In subsequent hbins these fields are all zero.
- *
- * From existing hives (first hbin only):
- *
- * unknown1 unknown2 unknown5
- * 00 00 00 00 00 00 00 00 9C 77 3B 02 6A 7D CA 01 00 00 00 00
- * 00 00 00 00 00 00 00 00 50 3A 15 07 B5 9B CA 01 00 00 00 00
- * 00 00 00 00 00 00 00 00 57 86 90 D4 9A 58 CA 01 00 00 00 00
- * 00 00 00 00 00 00 00 00 52 3F 90 9D CF 7C CA 01 00 00 00 00
- * 00 00 00 00 00 00 00 00 E8 86 C1 17 BD 06 CA 01 00 00 00 00
- * 00 00 00 00 00 00 00 00 4A 77 CE 7A CF 7C CA 01 00 00 00 00
- * 00 00 00 00 00 00 00 00 E4 EA 23 FF 69 7D CA 01 00 00 00 00
- * 00 00 00 00 00 00 00 00 50 13 BA 8D A2 9A CA 01 00 00 00 00
- * 00 00 00 00 00 00 00 00 0E 07 93 13 BD 06 CA 01 00 00 00 00
- * 00 00 00 00 00 00 00 00 9D 55 D0 B3 99 58 CA 01 00 00 00 00
- * 00 00 00 00 00 00 00 00 46 AC FF 8B CF 7C CA 01 00 00 00 00
- * 00 00 00 00 00 00 00 00 80 29 2D 02 6A 7D CA 01 00 00 00 00
- * 00 00 00 00 00 00 00 00 90 8D 36 07 B5 9B CA 01 00 00 00 00
- * 00 00 00 00 00 00 00 00 5C 9B 8B B8 6A 06 CA 01 00 00 00 00
- * 00 00 00 00 00 00 00 00 85 9F BB 99 9A 58 CA 01 00 00 00 00
- * 00 00 00 00 00 00 00 00 BE 3D 21 02 6A 7D CA 01 00 00 00 00
- * 00 00 00 00 00 00 00 00 70 53 09 07 B5 9B CA 01 00 00 00 00
- * 00 00 00 00 00 00 00 00 5B 62 42 B6 9A 58 CA 01 00 00 00 00
- * 01 00 00 00 00 00 00 00 B2 46 9B 9E CF 7C CA 01 00 00 00 00
- * 01 00 00 00 00 00 00 00 CA 88 EE 1A BD 06 CA 01 00 00 00 00
- *
- * From the above we worked out that fields 3 and 4 are an NT
- * timestamp, which seems to be "last modified" (when REGEDIT
- * unloads a hive it updates this timestamp even if nothing
- * has been changed).
- *)
- unknown1 : 4*8 : littleendian; (* usually zero, occasionally 1 *)
- unknown2 : 4*8 : littleendian; (* always zero? *)
- last_modified : 64
- : littleendian,
- bind (if page_offset = 0 then nt_to_time_t last_modified
- else (
- assert (last_modified = 0_L);
- 0.
- )
- );
- (* The "B.D." document said this field contains the page size, but
- * this is not true. This misinformation has been copied to the
- * sentinelchicken documentation too.
- *)
- unknown5 : 4*8 : littleendian; (* always zero? *)
-
- (* Now the blocks in this page follow. *)
- blocks : (page_size - 32) * 8 : bitstring;
-
- rest : -1 : bitstring }
-
-let fprintf_page chan bits =
- bitmatch bits with
- | { :page_fields } ->
- fprintf chan "HB %s %08x %08lx %08lx %s %08lx\n"
- (print_offset page_offset)
- page_size unknown1 unknown2
- (if page_offset = 0 then print_time last_modified
- else string_of_float last_modified) unknown5
-
-let bitmatch block_fields =
- { seg_len : 4*8
- : littleendian, bind (Int32.to_int seg_len);
- block_data : (abs seg_len - 4) * 8 : bitstring;
- rest : -1 : bitstring }
-
-let fprintf_block chan block_offset bits =
- bitmatch bits with
- | { :block_fields } ->
- fprintf chan "BL %s %s %d\n"
- (print_offset block_offset)
- (if seg_len < 0 then "used" else "free")
- (if seg_len < 0 then -seg_len else seg_len)
-
-(* Iterate over the pages and blocks. In the process we will examine
- * each page (hbin) header. Also we will build block_list which is a
- * list of (block offset, length, used flag, data).
- *)
-let block_list = ref []
-let () =
- let rec loop_over_pages data data_offset =
- if data_offset < end_pages then (
- bitmatch data with
- | { rest : -1 : bitstring } when bitstring_length rest = 0 -> ()
-
- | { :page_fields } ->
- fprintf_page stdout data;
-
- assert (page_offset = data_offset);
-
- if data_offset = 0 then ( (* first hbin only *)
- if unknown1 <> 0_l then
- eprintf "HB %s unknown1 field <> 0 (%08lx)\n"
- (print_offset page_offset) unknown1;
- if unknown2 <> 0_l then
- eprintf "HB %s unknown2 field <> 0 (%08lx)\n"
- (print_offset page_offset) unknown2;
- if unknown5 <> 0_l then
- eprintf "HB %s unknown5 field <> 0 (%08lx)\n"
- (print_offset page_offset) unknown5
- ) else ( (* subsequent hbins *)
- if unknown1 <> 0_l || unknown2 <> 0_l || unknown5 <> 0_l then
- eprintf "HB %s unknown fields <> 0 (%08lx %08lx %08lx)\n"
- (print_offset page_offset)
- unknown1 unknown2 unknown5;
- if last_modified <> 0. then
- eprintf "HB %s last_modified <> 0. (%g)\n"
- (print_offset page_offset) last_modified
- );
-
- (* Loop over the blocks in this page. *)
- loop_over_blocks blocks (data_offset + 32);
-
- (* Loop over rest of the pages. *)
- loop_over_pages rest (data_offset + page_size)
-
- | {_} ->
- failwithf "%s: invalid hbin at offset %s\n"
- basename (print_offset data_offset)
- ) else (
- (* Reached the end of the official hbins in this file, BUT the
- * file can be larger than this and might contain stuff. What
- * does it contain after the hbins? We think just junk, but
- * we're not sure.
- *)
- if not (is_zero_bitstring data) then (
- eprintf "Junk in file after end of pages:\n";
- let rec loop data data_offset =
- bitmatch data with
- | { rest : -1 : bitstring } when bitstring_length rest = 0 -> ()
- | { :page_fields } ->
- eprintf "\tjunk hbin %s 0x%08x\n"
- (print_offset data_offset) page_size;
- loop rest (data_offset + page_size);
- | { _ } ->
- eprintf "\tother junk %s %s\n"
- (print_offset data_offset) (print_bitstring data)
- in
- loop data data_offset
- )
- )
- and loop_over_blocks blocks block_offset =
- bitmatch blocks with
- | { rest : -1 : bitstring } when bitstring_length rest = 0 -> ()
-
- | { :block_fields } ->
- assert (block_offset mod 8 = 0);
-
- fprintf_block stdout block_offset blocks;
-
- let used, seg_len =
- if seg_len < 0 then true, -seg_len else false, seg_len in
-
- let block = block_offset, (seg_len, used, block_data) in
- block_list := block :: !block_list;
-
- (* Loop over the rest of the blocks in this page. *)
- loop_over_blocks rest (block_offset + seg_len)
-
- | {_} ->
- failwithf "%s: invalid block near offset %s\n"
- basename (print_offset block_offset)
- in
- loop_over_pages data 0
-
-(* Turn the block_list into a map so we can quickly look up a block
- * from its offset.
- *)
-let block_list = !block_list
-let block_map =
- List.fold_left (
- fun map (block_offset, block) -> IntMap.add block_offset block map
- ) IntMap.empty block_list
-let lookup fn offset =
- try
- let (_, used, _) as block = IntMap.find offset block_map in
- if not used then
- failwithf "%s: %s: lookup: free block %s referenced from hive tree"
- basename fn (print_offset offset);
- block
- with Not_found ->
- failwithf "%s: %s: lookup: unknown block %s referenced from hive tree"
- basename fn (print_offset offset)
-
-(* Use this to mark blocks that we've visited. If the hive contains
- * no unreferenced blocks, then by the end this should just contain
- * free blocks.
- *)
-let mark_visited, is_not_visited, unvisited_blocks =
- let v = ref block_map in
- let mark_visited offset = v := IntMap.remove offset !v
- and is_not_visited offset = IntMap.mem offset !v
- and unvisited_blocks () = !v in
- mark_visited, is_not_visited, unvisited_blocks
-
-(* Define persistent patterns to match nk-records, vk-records and
- * sk-records, which are the record types that we especially want to
- * analyze later. Other blocks types (eg. value lists, lf-records)
- * have no "spare space" so everything is known about them and we don't
- * store these.
- *)
-let bitmatch nk_fields =
- { "nk" : 2*8 : string;
- (* Flags stored in the file as a little endian word, hence the
- * unusual ordering:
- *)
- virtmirrored : 1;
- predefinedhandle : 1; keynameascii : 1; symlinkkey : 1;
- cannotbedeleted : 1; isroot : 1; ismountpoint : 1; isvolatile : 1;
- unknownflag8000 : 1; unknownflag4000 : 1;
- unknownflag2000 : 1; unknownflag1000 : 1;
- unknownflag0800 : 1; unknownflag0400 : 1;
- virtualstore : 1; virttarget : 1;
- timestamp : 64 : littleendian, bind (nt_to_time_t timestamp);
- unknown1 : 4*8 : littleendian;
- parent : 4*8 : littleendian, bind (get_offset parent);
- nr_subkeys : 4*8 : littleendian, bind (Int32.to_int nr_subkeys);
- nr_subkeys_vol : 4*8;
- subkeys : 4*8 : littleendian, bind (get_offset subkeys);
- subkeys_vol : 4*8;
- nr_values : 4*8 : littleendian, bind (Int32.to_int nr_values);
- vallist : 4*8 : littleendian, bind (get_offset vallist);
- sk : 4*8 : littleendian, bind (get_offset sk);
- classname : 4*8 : littleendian, bind (get_offset classname);
- (* sentinelchicken.com says this is a single 32 bit field
- * containing maximum number of bytes in a subkey name, however
- * that does not seem to be correct. We think it is several
- * fields, the first being the maximum number of bytes in the
- * UTF16-LE encoded version of the subkey names, (since subkey
- * names are usually ASCII, that would be max length of names * 2).
- * This is a historical maximum, so it can be greater than the
- * current maximum name field.
- *
- * The remaining fields are often non-zero, but the purpose is
- * unknown.
- *
- * In the hives we examined the other fields had values as
- * follows:
- * userflags: 0, 2, 0xa, 0xe
- * virtcontrolflags: 0, 1
- * debug: always 0
- *)
- max_subkey_name_len : 2*8 : littleendian;
- unknown2_userflags : 4;
- unknown2_virtcontrolflags : 4;
- unknown2_debug : 8;
-
- (* sentinelchicken.com says: maximum subkey CLASSNAME length,
- * however that does not seem to be correct. In hives I looked
- * at, it has value 0, 0xc, 0x10, 0x18, 0x1a, 0x28.
- *)
- unknown3 : 4*8 : littleendian;
- (* sentinelchicken.com says: maximum number of bytes in a value
- * name, however that does not seem to be correct. We think it is
- * the maximum number of bytes in the UTF16-LE encoded version of
- * the value names (since value names are usually ASCII, that would
- * be max length of names * 2). This is a historical maximum, so
- * it can be greater than the current maximum name field.
- *)
- max_vk_name_len : 4*8 : littleendian, bind (Int32.to_int max_vk_name_len);
- (* sentinelchicken.com says: maximum value data size, and this
- * agrees with my observations. It is the largest data size (not
- * seg_len, but vk.data_len) for any value in this key. We think
- * that this field is a historical max, so eg if a maximally sized
- * value is deleted then this field is not reduced. Certainly
- * max_vk_data_len >= the measured maximum in all the hives that we
- * have observed.
- *)
- max_vk_data_len : 4*8 : littleendian, bind (Int32.to_int max_vk_data_len);
- unknown6 : 4*8 : littleendian;
- name_len : 2*8 : littleendian;
- classname_len : 2*8 : littleendian;
- name : name_len * 8 : string }
-
-let fprintf_nk chan nk =
- let (_, _, bits) = lookup "fprintf_nk" nk in
- bitmatch bits with
- | { :nk_fields } ->
- fprintf chan
- "NK %s %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s %s %08lx %s %d %ld %s %08lx %d %s %s %s %d %x %x %x %08lx %d %d %08lx %d %d %s\n"
- (print_offset nk)
- (if unknownflag8000 then "8" else ".")
- (if unknownflag4000 then "4" else ".")
- (if unknownflag2000 then "2" else ".")
- (if unknownflag1000 then "1" else ".")
- (if unknownflag0800 then "8" else ".")
- (if unknownflag0400 then "4" else ".")
- (if virtualstore then "s" else ".")
- (if virttarget then "t" else ".")
- (if virtmirrored then "m" else ".")
- (if predefinedhandle then "P" else ".")
- (if keynameascii then "A" else ".")
- (if symlinkkey then "S" else ".")
- (if cannotbedeleted then "N" else ".")
- (if isroot then "R" else ".")
- (if ismountpoint then "M" else ".")
- (if isvolatile then "V" else ".")
- (print_time timestamp)
- unknown1 (print_offset parent) nr_subkeys nr_subkeys_vol
- (print_offset subkeys) subkeys_vol
- nr_values (print_offset vallist)
- (print_offset sk) (print_offset classname)
- max_subkey_name_len
- unknown2_userflags unknown2_virtcontrolflags unknown2_debug
- unknown3 max_vk_name_len max_vk_data_len unknown6
- name_len classname_len name
-
-type data_t = Inline of bitstring | Offset of int
-let bitmatch vk_fields =
- { "vk" : 2*8 : string;
- name_len : 2*8 : littleendian;
- (* Top bit set means that the data is stored inline. In that case
- * the data length must be <= 4. The length can also be 0 (or
- * 0x80000000) if the data type is NONE.
- *)
- data_len : 4*8
- : littleendian, bind (
- let is_inline = Int32.logand data_len 0x8000_0000_l = 0x8000_0000_l in
- let data_len = Int32.to_int (Int32.logand data_len 0x7fff_ffff_l) in
- if is_inline then assert (data_len <= 4) else assert (data_len > 4);
- is_inline, data_len
- );
- (* The data itself depends on the type field.
- *
- * For REG_SZ type, the data always seems to be NUL-terminated, which
- * means because these strings are often UTF-16LE, that the string will
- * end with \0\0 bytes. The termination bytes are included in data_len.
- *
- * For REG_MULTI_SZ, see
- * http://blogs.msdn.com/oldnewthing/archive/2009/10/08/9904646.aspx
- *)
- data : 4*8
- : bitstring, bind (
- let is_inline, data_len = data_len in
- if is_inline then
- Inline (takebits (data_len*8) data)
- else (
- let offset =
- bitmatch data with { offset : 4*8 : littleendian } -> offset in
- let offset = get_offset offset in
- Offset offset
- )
- );
- t : 4*8 : littleendian, bind (Int32.to_int t);
- (* Flags, stored as a little-endian word: *)
- unknown1 : 7;
- nameisascii : 1; (* Clear for default [zero-length] name, always set
- * otherwise in registries that we found. Perhaps this
- * is really "nameisdefault" flag?
- *)
- unknown2 : 8;
- (* Unknown field, usually contains something. *)
- unknown3 : 2*8 : littleendian;
- name : name_len * 8 : string }
-
-let fprintf_vk chan vk =
- let (_, _, bits) = lookup "fprintf_vk" vk in
- bitmatch bits with
- | { :vk_fields } ->
- let real_data =
- match data with
- | Inline data -> data
- | Offset offset ->
- let (_, _, bits) = lookup "fprintf_vk (data)" offset in
- bits in
- let is_inline, data_len = data_len in
- fprintf chan "VK %s %s %s %d %s%s %s %08x %s %08x %08x\n"
- (print_offset vk)
- name (if is_inline then "inline" else "-") data_len
- (match data with
- | Inline _ -> ""
- | Offset offset -> "["^print_offset offset^"]")
- (print_bitstring real_data)
- (print_vk_type t)
- unknown1 (if nameisascii then "A" else "L")
- unknown2 unknown3
-
-let bitmatch sk_fields =
- { "sk" : 2*8 : string;
- unknown1 : 2*8 : littleendian;
- sk_next : 4*8 : littleendian, bind (get_offset sk_next);
- sk_prev : 4*8 : littleendian, bind (get_offset sk_prev);
- refcount : 4*8 : littleendian, bind (Int32.to_int refcount);
- sec_len : 4*8 : littleendian, bind (Int32.to_int sec_len);
- sec_desc : sec_len * 8 : bitstring }
-
-let fprintf_sk chan sk =
- let (_, _, bits) = lookup "fprintf_sk" sk in
- bitmatch bits with
- | { :sk_fields } ->
- fprintf chan "SK %s %04x %s %s %d %d\n"
- (print_offset sk) unknown1
- (print_offset sk_next) (print_offset sk_prev)
- refcount sec_len
- (* print_bitstring sec_desc -- suppress this *)
-
-(* Store lists of records we encounter (lists of offsets). *)
-let nk_records = ref []
-and vk_records = ref []
-and sk_records = ref []
-
-(* Functions to visit each block, starting at the root. Each block
- * that we visit is printed.
- *)
-let rec visit_nk ?(nk_is_root = false) nk =
- let (_, _, bits) = lookup "visit_nk" nk in
- mark_visited nk;
- (bitmatch bits with
- | { :nk_fields } ->
- fprintf_nk stdout nk;
-
- nk_records := nk :: !nk_records;
-
- (* Check the isroot flag is only set on the root node. *)
- assert (isroot = nk_is_root);
-
- if unknownflag8000 then
- eprintf "NK %s unknownflag8000 is set\n" (print_offset nk);
- if unknownflag4000 then
- eprintf "NK %s unknownflag4000 is set\n" (print_offset nk);
- if unknownflag2000 then
- eprintf "NK %s unknownflag2000 is set\n" (print_offset nk);
- if unknownflag1000 then
- eprintf "NK %s unknownflag1000 is set\n" (print_offset nk);
- if unknownflag0800 then
- eprintf "NK %s unknownflag0800 is set\n" (print_offset nk);
- if unknownflag0400 then
- eprintf "NK %s unknownflag0400 is set\n" (print_offset nk);
- if unknown1 <> 0_l then
- eprintf "NK %s unknown1 <> 0 (%08lx)\n" (print_offset nk) unknown1;
- if unknown2_userflags <> 0 then
- eprintf "NK %s unknown2_userflags <> 0 (%x)\n"
- (print_offset nk) unknown2_userflags;
- if unknown2_virtcontrolflags <> 0 then
- eprintf "NK %s unknown2_virtcontrolflags <> 0 (%x)\n"
- (print_offset nk) unknown2_virtcontrolflags;
- if unknown2_debug <> 0 then
- eprintf "NK %s unknown2_debug <> 0 (%x)\n"
- (print_offset nk) unknown2_debug;
- if unknown3 <> 0_l then
- eprintf "NK %s unknown3 <> 0 (%08lx)\n" (print_offset nk) unknown3;
- if unknown6 <> 0_l then
- eprintf "NK %s unknown6 <> 0 (%08lx)\n" (print_offset nk) unknown6;
-
- (* -- common, assume it's not an error
- if classname = -1 then
- eprintf "NK %s has no classname\n" (print_offset nk);
- if classname_len = 0 then
- eprintf "NK %s has zero-length classname\n" (print_offset nk);
- *)
- if sk = -1 then
- eprintf "NK %s has no sk-record\n" (print_offset nk);
- if name_len = 0 then
- eprintf "NK %s has zero-length name\n" (print_offset nk);
-
- (* Visit the values first at this node. *)
- let max_data_len, max_name_len =
- if vallist <> -1 then
- visit_vallist nr_values vallist
- else
- 0, 0 in
-
- if max_vk_data_len < max_data_len then
- eprintf "NK %s nk.max_vk_data_len (%d) < actual max data_len (%d)\n"
- (print_offset nk) max_vk_data_len max_data_len;
-
- if max_vk_name_len < max_name_len * 2 then
- eprintf "NK %s nk.max_vk_name_len (%d) < actual max name_len * 2 (%d)\n"
- (print_offset nk) max_vk_name_len (max_name_len * 2);
-
- (* Visit the subkeys of this node. *)
- if subkeys <> -1 then (
- let counted, max_name_len, _ = visit_subkeys subkeys in
-
- if counted <> nr_subkeys then
- failwithf "%s: incorrect count of subkeys (%d, counted %d) in subkey list at %s\n"
- basename nr_subkeys counted (print_offset subkeys);
-
- if max_subkey_name_len < max_name_len * 2 then
- eprintf "NK %s nk.max_subkey_name_len (%d) < actual max name_len * 2 (%d)\n"
- (print_offset nk) max_subkey_name_len (max_name_len * 2);
- );
-
- (* Visit the sk-record and classname. *)
- if sk <> -1 then
- visit_sk sk;
- if classname <> -1 then
- visit_classname classname classname_len;
-
- | {_} ->
- failwithf "%s: invalid nk block at offset %s\n"
- basename (print_offset nk)
- )
-
-and visit_vallist nr_values vallist =
- let (seg_len, _, bits) = lookup "visit_vallist" vallist in
- mark_visited vallist;
- printf "VL %s %d %d\n" (print_offset vallist) nr_values seg_len;
- visit_values_in_vallist nr_values vallist bits
-
-and visit_values_in_vallist nr_values vallist bits =
- if nr_values > 0 then (
- bitmatch bits with
- | { rest : -1 : bitstring } when bitstring_length rest = 0 ->
- assert (nr_values = 0);
- 0, 0
-
- | { value : 4*8 : littleendian, bind (get_offset value);
- rest : -1 : bitstring } ->
- let data_len, name_len = visit_vk value in
- let max_data_len, max_name_len =
- visit_values_in_vallist (nr_values-1) vallist rest in
- max max_data_len data_len, max max_name_len name_len
-
- | {_} ->
- failwithf "%s: invalid offset in value list at %s\n"
- basename (print_offset vallist)
- ) else 0, 0
-
-and visit_vk vk =
- let (_, _, bits) = lookup "visit_vk" vk in
- mark_visited vk;
-
- (bitmatch bits with
- | { :vk_fields } ->
- fprintf_vk stdout vk;
-
- let is_inline, data_len = data_len in
-
- if unknown1 <> 0 then
- eprintf "VK %s unknown1 flags set (%02x)\n"
- (print_offset vk) unknown1;
- if unknown2 <> 0 then
- eprintf "VK %s unknown2 flags set (%02x)\n"
- (print_offset vk) unknown2;
- if unknown3 <> 0 then
- eprintf "VK %s unknown3 flags set (%04x)\n"
- (print_offset vk) unknown3;
-
- (* Note this is common for default [ie. zero-length] key names. *)
- if not nameisascii && name_len > 0 then
- eprintf "VK %s has non-ASCII name flag set (name is %s)\n"
- (print_offset vk) (print_binary_string name);
-
- vk_records := vk :: !vk_records;
- (match data with
- | Inline data -> ()
- | Offset offset ->
- let _ = lookup "visit_vk (data)" offset in
- mark_visited offset
- );
-
- data_len, name_len
-
- | {_} ->
- failwithf "%s: invalid vk block at offset %s\n"
- basename (print_offset vk)
- )
-
-(* Visits subkeys, recursing through intermediate lf/lh/ri structures,
- * and returns the number of subkeys actually seen.
- *)
-and visit_subkeys subkeys =
- let (_, _, bits) = lookup "visit_subkeys" subkeys in
- mark_visited subkeys;
- (bitmatch bits with
- | { "lf" : 2*8 : string;
- len : 2*8 : littleendian; (* number of subkeys of this node *)
- rest : len*8*8 : bitstring } ->
- printf "LF %s %d\n" (print_offset subkeys) len;
- visit_subkeys_in_lf_list false subkeys len rest
-
- | { "lh" : 2*8 : string;
- len : 2*8 : littleendian; (* number of subkeys of this node *)
- rest : len*8*8 : bitstring } ->
- printf "LF %s %d\n" (print_offset subkeys) len;
- visit_subkeys_in_lf_list true subkeys len rest
-
- | { "ri" : 2*8 : string;
- len : 2*8 : littleendian;
- rest : len*4*8 : bitstring } ->
- printf "RI %s %d\n" (print_offset subkeys) len;
- visit_subkeys_in_ri_list subkeys len rest
-
- (* In theory you can have an li-record here, but we've never
- * seen one.
- *)
-
- | { "nk" : 2*8 : string } ->
- visit_nk subkeys;
- let name, name_len = name_of_nk subkeys in
- 1, name_len, name
-
- | {_} ->
- failwithf "%s: invalid subkey node found at %s\n"
- basename (print_offset subkeys)
- )
-
-and visit_subkeys_in_lf_list newstyle_hash subkeys_top len bits =
- if len > 0 then (
- bitmatch bits with
- | { rest : -1 : bitstring } when bitstring_length rest = 0 ->
- assert (len = 0);
- 0, 0, ""
-
- | { offset : 4*8 : littleendian, bind (get_offset offset);
- hash : 4*8 : bitstring;
- rest : -1 : bitstring } ->
- let c1, name_len1, name = visit_subkeys offset in
-
- check_hash offset newstyle_hash hash name;
-
- let c2, name_len2, _ =
- visit_subkeys_in_lf_list newstyle_hash subkeys_top (len-1) rest in
- c1 + c2, max name_len1 name_len2, ""
-
- | {_} ->
- failwithf "%s: invalid subkey in lf/lh list at %s\n"
- basename (print_offset subkeys_top)
- ) else 0, 0, ""
-
-and visit_subkeys_in_ri_list subkeys_top len bits =
- if len > 0 then (
- bitmatch bits with
- | { rest : -1 : bitstring } when bitstring_length rest = 0 ->
- assert (len = 0);
- 0, 0, ""
-
- | { offset : 4*8 : littleendian, bind (get_offset offset);
- rest : -1 : bitstring } ->
- let c1, name_len1, _ = visit_subkeys offset in
- let c2, name_len2, _ =
- visit_subkeys_in_ri_list subkeys_top (len-1) rest in
- c1 + c2, max name_len1 name_len2, ""
-
- | {_} ->
- failwithf "%s: invalid subkey in ri list at %s\n"
- basename (print_offset subkeys_top)
- ) else 0, 0, ""
-
-and check_hash offset newstyle_hash hash name =
- if not newstyle_hash then (
- (* Old-style lf record hash the first four bytes of the name
- * as the has.
- *)
- let len = String.length name in
- let name_bits =
- if len >= 4 then
- bitstring_of_string (String.sub name 0 4)
- else (
- let zeroes = zeroes_bitstring ((4-len)*8) in
- concat [bitstring_of_string name; zeroes]
- ) in
- if not (equals hash name_bits) then
- eprintf "LF incorrect hash for name %s, expected %s, actual %s\n"
- name (print_bitstring name_bits) (print_bitstring hash)
- ) else (
- (* New-style lh record has a proper hash. *)
- let actual = bitmatch hash with { hash : 4*8 : littleendian } -> hash in
- let h = ref 0_l in
- String.iter (
- fun c ->
- h := Int32.mul !h 37_l;
- h := Int32.add !h (Int32.of_int (Char.code (Char.uppercase c)))
- ) name;
- if actual <> !h then
- eprintf "LH incorrect hash for name %s, expected 0x%08lx, actual 0x%08lx\n"
- name !h actual
- )
-
-and name_of_nk nk =
- let (_, _, bits) = lookup "name_of_nk" nk in
- bitmatch bits with
- | { :nk_fields } -> name, name_len
-
-and visit_sk sk =
- let (_, _, bits) = lookup "visit_sk" sk in
- if is_not_visited sk then (
- mark_visited sk;
- (bitmatch bits with
- | { :sk_fields } ->
- fprintf_sk stdout sk;
-
- if unknown1 <> 0 then
- eprintf "SK %s unknown1 <> 0 (%04x)\n" (print_offset sk) unknown1;
-
- sk_records := sk :: !sk_records
-
- | {_} ->
- failwithf "%s: invalid sk-record at %s\n"
- basename (print_offset sk)
- )
- )
-
-and visit_classname classname classname_len =
- let (seg_len, _, bits) = lookup "visit_classname" classname in
- mark_visited classname;
- assert (seg_len >= classname_len);
- printf "CL %s %s\n" (print_offset classname) (print_bitstring bits)
-
-let () =
- visit_nk ~nk_is_root:true root_key
-
-(* These are immutable now. *)
-let nk_records = !nk_records
-let vk_records = !vk_records
-let sk_records = !sk_records
-
-(* So we can rapidly tell what is an nk/vk/sk offset. *)
-let nk_set =
- List.fold_left (fun set offs -> IntSet.add offs set) IntSet.empty nk_records
-let vk_set =
- List.fold_left (fun set offs -> IntSet.add offs set) IntSet.empty vk_records
-let sk_set =
- List.fold_left (fun set offs -> IntSet.add offs set) IntSet.empty sk_records
-
-(* Now after visiting all the blocks, are there any used blocks which
- * are unvisited? If there are any then that would indicate either (a)
- * that the hive contains unreferenced blocks, or (b) that there are
- * referenced blocks that we did not visit because we don't have a full
- * understanding of the hive format.
- *
- * Windows 7 registries often contain a few of these -- not clear
- * how serious they are, but don't fail here.
- *)
-let () =
- let unvisited = unvisited_blocks () in
- IntMap.iter (
- fun offset block ->
- match block with
- | (_, false, _) -> () (* ignore unused blocks *)
- | (seg_len, true, _) ->
- eprintf "used block %s (length %d) is not referenced\n"
- (print_offset offset) seg_len
- ) unvisited
-
-(* Check the SKs are:
- * (a) linked into a single circular list through the sk_prev/sk_next
- * pointers
- * (b) refcounts are correct
- *)
-let () =
- if List.length sk_records > 0 then (
- let sk0 = List.hd sk_records in (* start at any arbitrary sk *)
- (* This loop follows the chain of sk pointers until we arrive
- * back at the original, checking prev/next are consistent.
- *)
- let rec loop visited prevsk sk =
- if sk <> sk0 then (
- if not (IntSet.mem sk sk_set) then
- eprintf "SK %s not an sk-record (faulty sk_next somewhere)\n"
- (print_offset sk)
- else (
- let _, _, bits = lookup "loop sk circular list" sk in
- bitmatch bits with
- | { :sk_fields } ->
- if sk_prev <> prevsk then
- eprintf "SK %s sk_prev != previous sk (%s, %s)\n"
- (print_offset sk)
- (print_offset sk_prev) (print_offset prevsk);
- if IntSet.mem sk visited then
- eprintf "SK %s already visited (bad circular list)\n"
- (print_offset sk);
- let visited = IntSet.add sk visited in
- loop visited sk sk_next
- )
- )
- in
- let _, _, bits = lookup "start sk circular list" sk0 in
- (bitmatch bits with
- | { :sk_fields } ->
- loop IntSet.empty sk_prev sk0
- );
-
- (* For every nk-record, if it references an sk-record count that,
- * then check this matches the refcounts in the sk-records
- * themselves.
- *)
- let refcounts = Counter.create () in
- List.iter (
- fun nk ->
- let _, _, bits = lookup "sk refcounter (nk)" nk in
- (bitmatch bits with
- | { :nk_fields } ->
- Counter.incr refcounts sk
- )
- ) nk_records;
-
- List.iter (
- fun sk ->
- let _, _, bits = lookup "sk refcounter (sk)" sk in
- (bitmatch bits with
- | { :sk_fields } ->
- let actual = Counter.get refcounts sk in
- if actual <> refcount then
- eprintf "SK %s incorrect refcount (actual %d, in file %d)\n"
- (print_offset sk) actual refcount
- )
- ) sk_records
- )
diff --git a/trunk/hivex/lib/tools/visualizer_NT_time.ml b/trunk/hivex/lib/tools/visualizer_NT_time.ml
deleted file mode 100644
index a752112..0000000
--- a/trunk/hivex/lib/tools/visualizer_NT_time.ml
+++ /dev/null
@@ -1,30 +0,0 @@
-(* Windows Registry reverse-engineering tool.
- * Copyright (C) 2010 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * For existing information on the registry format, please refer
- * to the following documents. Note they are both incomplete
- * and inaccurate in some respects.
- *)
-
-(* Convert an NT file timestamp to time_t. See:
- * http://blogs.msdn.com/oldnewthing/archive/2003/09/05/54806.aspx
- * http://support.microsoft.com/kb/167296
- *)
-let nt_to_time_t t =
- let t = Int64.sub t 116444736000000000L in
- let t = Int64.div t 10000000L in
- Int64.to_float t
diff --git a/trunk/hivex/lib/tools/visualizer_utils.ml b/trunk/hivex/lib/tools/visualizer_utils.ml
deleted file mode 100644
index 2f0d6b7..0000000
--- a/trunk/hivex/lib/tools/visualizer_utils.ml
+++ /dev/null
@@ -1,163 +0,0 @@
-(* Windows Registry reverse-engineering tool.
- * Copyright (C) 2010 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * For existing information on the registry format, please refer
- * to the following documents. Note they are both incomplete
- * and inaccurate in some respects.
- *)
-
-open ExtString
-open Printf
-
-let failwithf fs = ksprintf failwith fs
-
-(* Useful function to convert unknown bitstring fragments into
- * printable strings.
- *)
-let rec print_bitstring bits =
- let str = Bitstring.string_of_bitstring bits in
- print_binary_string str
-and print_binary_string str =
- let rec printable = function
- | '\x00' -> "\\0" | '\x01' -> "\\1" | '\x02' -> "\\2" | '\x03' -> "\\3"
- | '\x04' -> "\\4" | '\x05' -> "\\5" | '\x06' -> "\\6" | '\x07' -> "\\7"
- | ('\x08'..'\x31' as c)
- | ('\x7f'..'\xff' as c) -> sprintf "\\x%02x" (Char.code c)
- | ('\x32'..'\x7e' as c) -> String.make 1 c
- and repeat str = function
- | n when n <= 0 -> ""
- | n -> str ^ repeat str (n-1)
- in
- let chars = String.explode str in
- let rec loop acc = function
- | [] -> List.rev acc
- | x :: xs ->
- let rec loop2 i = function
- | y :: ys when x = y -> loop2 (i+1) ys
- | ys -> i, ys
- in
- let count, ys = loop2 1 xs in
- let acc = (count, x) :: acc in
- loop acc ys
- in
- let frags = loop [] chars in
- let frags =
- List.map (function
- | (nr, x) when nr <= 4 -> repeat (printable x) nr
- | (nr, x) -> sprintf "%s<%d times>" (printable x) nr
- ) frags in
- "\"" ^ String.concat "" frags ^ "\""
-
-(* Convert an offset from the file to an offset. The only special
- * thing is that 0xffffffff in the file is used as a kind of "NULL
- * pointer". We map these null values to -1.
- *)
-let get_offset = function
- | 0xffffffff_l -> -1
- | i -> Int32.to_int i
-
-(* Print an offset. *)
-let print_offset = function
- | -1 -> "NULL"
- | i -> sprintf "@%08x" i
-
-(* Print time. *)
-let print_time t =
- let tm = Unix.gmtime t in
- sprintf "%04d-%02d-%02d %02d:%02d:%02d"
- (tm.Unix.tm_year + 1900) (tm.Unix.tm_mon + 1) tm.Unix.tm_mday
- tm.Unix.tm_hour tm.Unix.tm_min tm.Unix.tm_sec
-
-(* Print UTF16LE. *)
-let print_utf16 str =
- let n = String.length str in
- if n land 1 <> 0 then
- print_binary_string str
- else (
- let rec loop i =
- if i < n-1 then (
- let c1 = Char.code (str.[i]) in
- let c2 = Char.code (str.[i+1]) in
- if c1 <> 0 || c2 <> 0 then (
- (* Well, this doesn't print non-7bit-ASCII ... *)
- let c =
- if c2 = 0 then String.make 1 (Char.chr c1)
- else sprintf "\\u%04d" (c2 * 256 + c1) in
- c :: loop (i+2)
- ) else []
- ) else []
- in
- let frags = loop 0 in
- "L\"" ^ String.concat "" frags ^ "\""
- )
-
-(* A map of int -> anything. *)
-module IntMap = Map.Make (struct type t = int let compare = compare end)
-
-(* A set of ints. *)
-module IntSet = Set.Make (struct type t = int let compare = compare end)
-
-(* Print registry vk-record type field. *)
-let print_vk_type = function
- | 0 -> "NONE"
- | 1 -> "SZ"
- | 2 -> "EXPAND_SZ"
- | 3 -> "BINARY"
- | 4 -> "DWORD"
- | 5 -> "DWORD_BIG_ENDIAN"
- | 6 -> "LINK"
- | 7 -> "MULTI_SZ"
- | 8 -> "RESOURCE_LiST"
- | 9 -> "FULL_RESOURCE_DESCRIPTOR"
- | 10 -> "RESOURCE_REQUIREMENTS_LIST"
- | 11 -> "QWORD"
- | i -> sprintf "UNKNOWN_VK_TYPE_%d" i
-
-(* XXX We should write a more efficient version of this and
- * push it into the bitstring library.
- *)
-let is_zero_bitstring bits =
- let len = Bitstring.bitstring_length bits in
- let zeroes = Bitstring.zeroes_bitstring len in
- 0 = Bitstring.compare bits zeroes
-
-let is_zero_guid = is_zero_bitstring
-
-(* http://msdn.microsoft.com/en-us/library/aa373931(VS.85).aspx
- * Endianness of GUIDs is not clear from the MSDN documentation,
- * so this is just a guess.
- *)
-let print_guid bits =
- bitmatch bits with
- | { data1 : 4*8 : littleendian;
- data2 : 2*8 : littleendian;
- data3 : 2*8 : littleendian;
- data4_1 : 2*8 : littleendian;
- data4_2 : 6*8 : littleendian } ->
- sprintf "%08lX-%04X-%04X-%04X-%012LX" data1 data2 data3 data4_1 data4_2
- | { _ } ->
- assert false
-
-(* Fold over little-endian 32-bit integers in a bitstring. *)
-let rec bitstring_fold_left_int32_le f a bits =
- bitmatch bits with
- | { i : 4*8 : littleendian;
- rest : -1 : bitstring } ->
- bitstring_fold_left_int32_le f (f a i) rest
- | { rest : -1 : bitstring } when Bitstring.bitstring_length rest = 0 -> a
- | { _ } ->
- invalid_arg "bitstring_fold_left_int32_le: length not a multiple of 32 bits"
diff --git a/trunk/hivex/m4/ocaml.m4 b/trunk/hivex/m4/ocaml.m4
deleted file mode 100644
index fddd6a0..0000000
--- a/trunk/hivex/m4/ocaml.m4
+++ /dev/null
@@ -1,217 +0,0 @@
-dnl autoconf macros for OCaml
-dnl
-dnl Copyright © 2009 Richard W.M. Jones
-dnl Copyright © 2009 Stefano Zacchiroli
-dnl Copyright © 2000-2005 Olivier Andrieu
-dnl Copyright © 2000-2005 Jean-Christophe Filliâtre
-dnl Copyright © 2000-2005 Georges Mariano
-dnl
-dnl For documentation, please read the ocaml.m4 man page.
-
-AC_DEFUN([AC_PROG_OCAML],
-[dnl
- # checking for ocamlc
- AC_CHECK_TOOL([OCAMLC],[ocamlc],[no])
-
- if test "$OCAMLC" != "no"; then
- OCAMLVERSION=`$OCAMLC -v | sed -n -e 's|.*version* *\(.*\)$|\1|p'`
- AC_MSG_RESULT([OCaml version is $OCAMLVERSION])
- OCAMLLIB=`$OCAMLC -where 2>/dev/null || $OCAMLC -v|tail -1|cut -d ' ' -f 4`
- AC_MSG_RESULT([OCaml library path is $OCAMLLIB])
-
- AC_SUBST([OCAMLVERSION])
- AC_SUBST([OCAMLLIB])
-
- # checking for ocamlopt
- AC_CHECK_TOOL([OCAMLOPT],[ocamlopt],[no])
- OCAMLBEST=byte
- if test "$OCAMLOPT" = "no"; then
- AC_MSG_WARN([Cannot find ocamlopt; bytecode compilation only.])
- else
- TMPVERSION=`$OCAMLOPT -v | sed -n -e 's|.*version* *\(.*\)$|\1|p' `
- if test "$TMPVERSION" != "$OCAMLVERSION" ; then
- AC_MSG_RESULT([versions differs from ocamlc; ocamlopt discarded.])
- OCAMLOPT=no
- else
- OCAMLBEST=opt
- fi
- fi
-
- AC_SUBST([OCAMLBEST])
-
- # checking for ocamlc.opt
- AC_CHECK_TOOL([OCAMLCDOTOPT],[ocamlc.opt],[no])
- if test "$OCAMLCDOTOPT" != "no"; then
- TMPVERSION=`$OCAMLCDOTOPT -v | sed -n -e 's|.*version* *\(.*\)$|\1|p' `
- if test "$TMPVERSION" != "$OCAMLVERSION" ; then
- AC_MSG_RESULT([versions differs from ocamlc; ocamlc.opt discarded.])
- else
- OCAMLC=$OCAMLCDOTOPT
- fi
- fi
-
- # checking for ocamlopt.opt
- if test "$OCAMLOPT" != "no" ; then
- AC_CHECK_TOOL([OCAMLOPTDOTOPT],[ocamlopt.opt],[no])
- if test "$OCAMLOPTDOTOPT" != "no"; then
- TMPVERSION=`$OCAMLOPTDOTOPT -v | sed -n -e 's|.*version* *\(.*\)$|\1|p' `
- if test "$TMPVERSION" != "$OCAMLVERSION" ; then
- AC_MSG_RESULT([version differs from ocamlc; ocamlopt.opt discarded.])
- else
- OCAMLOPT=$OCAMLOPTDOTOPT
- fi
- fi
- fi
-
- AC_SUBST([OCAMLOPT])
- fi
-
- AC_SUBST([OCAMLC])
-
- # checking for ocamldep
- AC_CHECK_TOOL([OCAMLDEP],[ocamldep],[no])
-
- # checking for ocamlmktop
- AC_CHECK_TOOL([OCAMLMKTOP],[ocamlmktop],[no])
-
- # checking for ocamlmklib
- AC_CHECK_TOOL([OCAMLMKLIB],[ocamlmklib],[no])
-
- # checking for ocamldoc
- AC_CHECK_TOOL([OCAMLDOC],[ocamldoc],[no])
-
- # checking for ocamlbuild
- AC_CHECK_TOOL([OCAMLBUILD],[ocamlbuild],[no])
-])
-
-
-AC_DEFUN([AC_PROG_OCAMLLEX],
-[dnl
- # checking for ocamllex
- AC_CHECK_TOOL([OCAMLLEX],[ocamllex],[no])
- if test "$OCAMLLEX" != "no"; then
- AC_CHECK_TOOL([OCAMLLEXDOTOPT],[ocamllex.opt],[no])
- if test "$OCAMLLEXDOTOPT" != "no"; then
- OCAMLLEX=$OCAMLLEXDOTOPT
- fi
- fi
- AC_SUBST([OCAMLLEX])
-])
-
-AC_DEFUN([AC_PROG_OCAMLYACC],
-[dnl
- AC_CHECK_TOOL([OCAMLYACC],[ocamlyacc],[no])
- AC_SUBST([OCAMLYACC])
-])
-
-
-AC_DEFUN([AC_PROG_CAMLP4],
-[dnl
- AC_REQUIRE([AC_PROG_OCAML])dnl
-
- # checking for camlp4
- AC_CHECK_TOOL([CAMLP4],[camlp4],[no])
- if test "$CAMLP4" != "no"; then
- TMPVERSION=`$CAMLP4 -v 2>&1| sed -n -e 's|.*version *\(.*\)$|\1|p'`
- if test "$TMPVERSION" != "$OCAMLVERSION" ; then
- AC_MSG_RESULT([versions differs from ocamlc])
- CAMLP4=no
- fi
- fi
- AC_SUBST([CAMLP4])
-
- # checking for companion tools
- AC_CHECK_TOOL([CAMLP4BOOT],[camlp4boot],[no])
- AC_CHECK_TOOL([CAMLP4O],[camlp4o],[no])
- AC_CHECK_TOOL([CAMLP4OF],[camlp4of],[no])
- AC_CHECK_TOOL([CAMLP4OOF],[camlp4oof],[no])
- AC_CHECK_TOOL([CAMLP4ORF],[camlp4orf],[no])
- AC_CHECK_TOOL([CAMLP4PROF],[camlp4prof],[no])
- AC_CHECK_TOOL([CAMLP4R],[camlp4r],[no])
- AC_CHECK_TOOL([CAMLP4RF],[camlp4rf],[no])
- AC_SUBST([CAMLP4BOOT])
- AC_SUBST([CAMLP4O])
- AC_SUBST([CAMLP4OF])
- AC_SUBST([CAMLP4OOF])
- AC_SUBST([CAMLP4ORF])
- AC_SUBST([CAMLP4PROF])
- AC_SUBST([CAMLP4R])
- AC_SUBST([CAMLP4RF])
-])
-
-
-AC_DEFUN([AC_PROG_FINDLIB],
-[dnl
- AC_REQUIRE([AC_PROG_OCAML])dnl
-
- # checking for ocamlfind
- AC_CHECK_TOOL([OCAMLFIND],[ocamlfind],[no])
- AC_SUBST([OCAMLFIND])
-])
-
-
-dnl Thanks to Jim Meyering for working this next bit out for us.
-dnl XXX We should define AS_TR_SH if it's not defined already
-dnl (eg. for old autoconf).
-AC_DEFUN([AC_CHECK_OCAML_PKG],
-[dnl
- AC_REQUIRE([AC_PROG_FINDLIB])dnl
-
- AC_MSG_CHECKING([for OCaml findlib package $1])
-
- unset found
- unset pkg
- found=no
- for pkg in $1 $2 ; do
- if $OCAMLFIND query $pkg >/dev/null 2>/dev/null; then
- AC_MSG_RESULT([found])
- AS_TR_SH([OCAML_PKG_$1])=$pkg
- found=yes
- break
- fi
- done
- if test "$found" = "no" ; then
- AC_MSG_RESULT([not found])
- AS_TR_SH([OCAML_PKG_$1])=no
- fi
-
- AC_SUBST(AS_TR_SH([OCAML_PKG_$1]))
-])
-
-
-AC_DEFUN([AC_CHECK_OCAML_MODULE],
-[dnl
- AC_MSG_CHECKING([for OCaml module $2])
-
- cat > conftest.ml <<EOF
-open $3
-EOF
- unset found
- for $1 in $$1 $4 ; do
- if $OCAMLC -c -I "$$1" conftest.ml >&5 2>&5 ; then
- found=yes
- break
- fi
- done
-
- if test "$found" ; then
- AC_MSG_RESULT([$$1])
- else
- AC_MSG_RESULT([not found])
- $1=no
- fi
- AC_SUBST([$1])
-])
-
-
-dnl XXX Cross-compiling
-AC_DEFUN([AC_CHECK_OCAML_WORD_SIZE],
-[dnl
- AC_MSG_CHECKING([for OCaml compiler word size])
- cat > conftest.ml <<EOF
- print_endline (string_of_int Sys.word_size)
- EOF
- OCAML_WORD_SIZE=`ocaml conftest.ml`
- AC_MSG_RESULT([$OCAML_WORD_SIZE])
- AC_SUBST([OCAML_WORD_SIZE])
-])
diff --git a/trunk/hivex/ocaml/.depend b/trunk/hivex/ocaml/.depend
deleted file mode 100644
index 64a531f..0000000
--- a/trunk/hivex/ocaml/.depend
+++ /dev/null
@@ -1,3 +0,0 @@
-hivex.cmi:
-hivex.cmo: hivex.cmi
-hivex.cmx: hivex.cmi
diff --git a/trunk/hivex/ocaml/META.in b/trunk/hivex/ocaml/META.in
deleted file mode 100644
index 45b0a92..0000000
--- a/trunk/hivex/ocaml/META.in
+++ /dev/null
@@ -1,6 +0,0 @@
-name="hivex"
-version="@PACKAGE_VERSION@"
-description="Windows Registry hive file bindings for OCaml"
-requires="unix"
-archive(byte)="mlhivex.cma"
-archive(native)="mlhivex.cmxa"
diff --git a/trunk/hivex/ocaml/Makefile.am b/trunk/hivex/ocaml/Makefile.am
deleted file mode 100644
index 7e179b5..0000000
--- a/trunk/hivex/ocaml/Makefile.am
+++ /dev/null
@@ -1,117 +0,0 @@
-# hivex OCaml bindings
-# Copyright (C) 2009-2010, 2012 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-EXTRA_DIST = \
- .depend META.in \
- hivex.mli hivex.ml \
- hivex_c.c \
- t/*.ml
-
-CLEANFILES = *.cmi *.cmo *.cmx *.cma *.cmxa *.o *.a *.so
-CLEANFILES += t/*.cmi t/*.cmo t/*.cmx t/*.o t/*.a t/*.so
-
-AM_CPPFLAGS = \
- -I$(top_builddir) -I$(OCAMLLIB) -I$(top_srcdir)/ocaml \
- -I$(top_srcdir)/lib \
- $(WARN_CFLAGS) $(WERROR_CFLAGS)
-
-if HAVE_OCAML
-
-noinst_DATA = mlhivex.cma META
-
-if HAVE_OCAMLOPT
-noinst_DATA += mlhivex.cmxa
-endif
-
-OBJS = hivex_c.o hivex.cmo
-XOBJS = $(OBJS:.cmo=.cmx)
-
-mlhivex.cma: $(OBJS)
- $(OCAMLMKLIB) -o mlhivex $^ -L$(top_builddir)/lib/.libs -lhivex
-
-mlhivex.cmxa: $(XOBJS)
- $(OCAMLMKLIB) -o mlhivex $^ -L$(top_builddir)/lib/.libs -lhivex
-
-hivex_c.o: hivex_c.c
- $(CC) $(AM_CPPFLAGS) $(CFLAGS) -fPIC -Wall -c $<
-
-TESTS_ENVIRONMENT = \
- LD_LIBRARY_PATH=$(top_builddir)/lib/.libs:$(top_builddir)/ocaml \
- $(VG)
-
-TESTS = \
- t/hivex_005_load \
- t/hivex_010_open \
- t/hivex_020_root \
- t/hivex_100_errors \
- t/hivex_110_gc_handle \
- t/hivex_120_rlenvalue \
- t/hivex_200_write \
- t/hivex_300_fold
-noinst_DATA += $(TESTS)
-
-# https://www.redhat.com/archives/libguestfs/2011-May/thread.html#00015
-t/%: t/%.cmo mlhivex.cma
- $(LIBTOOL) --mode=execute -dlopen $(top_builddir)/lib/libhivex.la \
- $(OCAMLFIND) ocamlc -dllpath $(abs_builddir) -package unix \
- -linkpkg mlhivex.cma $< -o $@
-
-.mli.cmi:
- $(OCAMLFIND) ocamlc -package unix -c $< -o $@
-.ml.cmo:
- mkdir -p `dirname $@`
- $(OCAMLFIND) ocamlc -package unix -c $< -o $@
-.ml.cmx:
- $(OCAMLFIND) ocamlopt -package unix -c $< -o $@
-
-depend: .depend
-
-.depend: $(wildcard *.mli) $(wildcard *.ml)
- rm -f $@ $@-t
- $(OCAMLFIND) ocamldep $^ | \
- $(SED) 's/ *$$//' | \
- $(SED) -e :a -e '/ *\\$$/N; s/ *\\\n */ /; ta' | \
- $(SED) -e 's, :,:,g' | \
- $(SED) -e 's,$(abs_srcdir)/,$(builddir)/,g' | \
- sort > $@-t
- mv $@-t $@
-
-include .depend
-
-SUFFIXES = .cmo .cmi .cmx .ml .mli .mll .mly
-
-# Do the installation by hand, because we want to run ocamlfind.
-install_files = META *.so *.a *.cma *.cmi $(srcdir)/*.mli
-
-if HAVE_OCAMLOPT
-install_files += *.cmx *.cmxa
-endif
-
-install-data-hook:
- mkdir -p $(DESTDIR)$(OCAMLLIB)/stublibs
- $(OCAMLFIND) install \
- -ldconf ignore -destdir $(DESTDIR)$(OCAMLLIB) \
- $(PACKAGE_NAME) \
- $(install_files)
-
-CLEANFILES += $(noinst_DATA)
-
-endif
-
-# Tell version 3.79 and up of GNU make to not build goals in this
-# directory in parallel. (See RHBZ#502309).
-.NOTPARALLEL:
diff --git a/trunk/hivex/ocaml/t/hivex_005_load.ml b/trunk/hivex/ocaml/t/hivex_005_load.ml
deleted file mode 100644
index 704dc0b..0000000
--- a/trunk/hivex/ocaml/t/hivex_005_load.ml
+++ /dev/null
@@ -1,20 +0,0 @@
-(* hivex OCaml bindings
- * Copyright (C) 2009-2010 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *)
-
-(* Just links with the library, doesn't run anything. *)
-let _ = Hivex.open_file
diff --git a/trunk/hivex/ocaml/t/hivex_010_open.ml b/trunk/hivex/ocaml/t/hivex_010_open.ml
deleted file mode 100644
index 5a74a7b..0000000
--- a/trunk/hivex/ocaml/t/hivex_010_open.ml
+++ /dev/null
@@ -1,33 +0,0 @@
-(* hivex OCaml bindings
- * Copyright (C) 2009-2010 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *)
-
-(* Test that we can open, read in and close a hive file. *)
-
-open Unix
-open Printf
-let (//) = Filename.concat
-let srcdir = try Sys.getenv "srcdir" with Not_found -> "."
-
-let () =
- let h = Hivex.open_file (srcdir // "../images/minimal") [] in
- Hivex.close h;
-
- (* Gc.compact is a good way to ensure we don't have
- * heap corruption or double-freeing.
- *)
- Gc.compact ()
diff --git a/trunk/hivex/ocaml/t/hivex_020_root.ml b/trunk/hivex/ocaml/t/hivex_020_root.ml
deleted file mode 100644
index d11c991..0000000
--- a/trunk/hivex/ocaml/t/hivex_020_root.ml
+++ /dev/null
@@ -1,34 +0,0 @@
-(* hivex OCaml bindings
- * Copyright (C) 2009-2010 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *)
-
-(* Test that the root of the minimal hive exists. *)
-
-open Unix
-open Printf
-let (//) = Filename.concat
-let srcdir = try Sys.getenv "srcdir" with Not_found -> "."
-
-let () =
- let h = Hivex.open_file (srcdir // "../images/minimal") [] in
- ignore (Hivex.root h);
- Hivex.close h;
-
- (* Gc.compact is a good way to ensure we don't have
- * heap corruption or double-freeing.
- *)
- Gc.compact ()
diff --git a/trunk/hivex/ocaml/t/hivex_100_errors.ml b/trunk/hivex/ocaml/t/hivex_100_errors.ml
deleted file mode 100644
index 0577632..0000000
--- a/trunk/hivex/ocaml/t/hivex_100_errors.ml
+++ /dev/null
@@ -1,69 +0,0 @@
-(* hivex OCaml bindings
- * Copyright (C) 2009-2010 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *)
-
-(* Test different types of error handling used by the API. *)
-
-open Unix
-open Printf
-let (//) = Filename.concat
-let srcdir = try Sys.getenv "srcdir" with Not_found -> "."
-
-let () =
- printf "01 non-existent file\n%!";
- (try
- ignore (Hivex.open_file "no_such_file" []);
- failwith "no exception thrown when opening a non-existent file"
- with
- | Hivex.Error ("open", ENOENT, _) -> () (* ok *)
- (* let any other exception escape and stop the test *)
- );
-
- printf "02 closed handle\n%!";
- let h = Hivex.open_file (srcdir // "../images/minimal") [] in
- Hivex.close h;
- (try
- ignore (Hivex.root h)
- with
- | Hivex.Handle_closed "root" -> () (* ok *)
- (* let any other exception escape and stop the test *)
- );
-
- printf "03 write to read-only file\n%!";
- let h = Hivex.open_file (srcdir // "../images/minimal") [] in
- (try
- ignore (Hivex.node_add_child h (Hivex.root h) "Foo")
- with
- | Hivex.Error ("node_add_child", EROFS, _) -> () (* ok *)
- (* let any other exception escape and stop the test *)
- );
- Hivex.close h;
-
- printf "04 node_get_child node not found\n%!";
- let h = Hivex.open_file (srcdir // "../images/minimal") [] in
- (try
- ignore (Hivex.node_get_child h (Hivex.root h) "NoSuchNode")
- with
- | Not_found -> () (* ok *)
- (* let any other exception escape and stop the test *)
- );
- Hivex.close h;
-
- (* Gc.compact is a good way to ensure we don't have
- * heap corruption or double-freeing.
- *)
- Gc.compact ()
diff --git a/trunk/hivex/ocaml/t/hivex_110_gc_handle.ml b/trunk/hivex/ocaml/t/hivex_110_gc_handle.ml
deleted file mode 100644
index 0820a89..0000000
--- a/trunk/hivex/ocaml/t/hivex_110_gc_handle.ml
+++ /dev/null
@@ -1,32 +0,0 @@
-(* hivex OCaml bindings
- * Copyright (C) 2009-2010 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *)
-
-(* Test that the handle is GC'd (closed) when unreachable.
- *
- * XXX Actually we cannot really test that, but at least make
- * sure there is no error.
- *)
-
-open Unix
-open Printf
-let (//) = Filename.concat
-let srcdir = try Sys.getenv "srcdir" with Not_found -> "."
-
-let () =
- ignore (Hivex.open_file (srcdir // "../images/minimal") []);
- Gc.compact ()
diff --git a/trunk/hivex/ocaml/t/hivex_120_rlenvalue.ml b/trunk/hivex/ocaml/t/hivex_120_rlenvalue.ml
deleted file mode 100644
index 827dc46..0000000
--- a/trunk/hivex/ocaml/t/hivex_120_rlenvalue.ml
+++ /dev/null
@@ -1,44 +0,0 @@
-(* hivex OCaml bindings
- * Copyright (C) 2009-2010, 2012 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *)
-
-(* Demonstrate value_data_cell_offset by looking at the value data at
- * "\$$$PROTO.HIV\ModerateValueParent\33Bytes", verified to be at file
- * offset 8680 (0x21e8) of the hive rlenvalue_test_hive. The returned
- * length and offset for this value cell should be 37 bytes, position
- * 8712.
- *)
-
-open Unix
-open Printf
-let (//) = Filename.concat
-let srcdir = try Sys.getenv "srcdir" with Not_found -> "."
-
-let () =
- let h = Hivex.open_file (srcdir // "../images/rlenvalue_test_hive") [] in
- let root = Hivex.root h in
- let moderate_value_node = Hivex.node_get_child h root "ModerateValueParent" in
- let moderate_value_value = Hivex.node_get_value h moderate_value_node "33Bytes" in
- let (data_len, data_off) = Hivex.value_data_cell_offset h moderate_value_value in
- assert ( (data_off == (Obj.magic 8712:Hivex.value)) && (data_len == 37) );
-
- Hivex.close h;
-
- (* Gc.compact is a good way to ensure we don't have
- * heap corruption or double-freeing.
- *)
- Gc.compact ()
diff --git a/trunk/hivex/ocaml/t/hivex_200_write.ml b/trunk/hivex/ocaml/t/hivex_200_write.ml
deleted file mode 100644
index f70deee..0000000
--- a/trunk/hivex/ocaml/t/hivex_200_write.ml
+++ /dev/null
@@ -1,75 +0,0 @@
-(* hivex OCaml bindings
- * Copyright (C) 2009-2010 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *)
-
-(* Test some significant write operations. Take the minimal hive
- * and algorithmically construct a large, deep hive.
- *)
-
-open Unix
-open Printf
-let (//) = Filename.concat
-let srcdir = try Sys.getenv "srcdir" with Not_found -> "."
-
-let () =
- let h = Hivex.open_file (srcdir // "../images/minimal") [Hivex.OPEN_WRITE] in
-
- let degrees = [| 3; 1; 4; 1; 5; 9; 2 |] (* ~1000 nodes *) in
- let numbers = [| "Zero"; "One"; "Two"; "Three"; "Four";
- "Five"; "Six"; "Seven"; "Eight"; "Nine" |] in
- let animals = [| "Horse"; "Ant"; "Mouse"; "Rabbit"; "Cat";
- "Giraffe"; "Kangaroo"; "Tiger"; "Zebra"; "Elephant" |] in
-
- let rec iter depth posn parent =
- if depth < Array.length degrees then (
- let degree = degrees.(depth) in
- for i = 0 to degree-1 do
- let node_name = numbers.(depth) ^ " " ^ animals.(i) in
- let node = Hivex.node_add_child h parent node_name in
- iter (depth+1) i node
- done;
- let values = Array.init (10-posn) (
- fun i ->
- { Hivex.key = animals.(i);
- t = Hivex.REG_SZ;
- value = utf16le_of_ascii numbers.(i) }
- ) in
- Hivex.node_set_values h parent values
- )
-
- (* Make a nul-terminated UTF16-LE string from an ASCII string. *)
- and utf16le_of_ascii str =
- let len = String.length str in
- let len' = len * 2 + 2 in
- let str' = String.create len' in
- for i = 0 to len-1 do
- str'.[i*2] <- str.[i];
- str'.[i*2+1] <- '\000'
- done;
- str'.[len'-2] <- '\000';
- str'.[len'-1] <- '\000';
- str'
- in
- iter 0 0 (Hivex.root h);
-
- (* Discard the changes. *)
- Hivex.close h;
-
- (* Gc.compact is a good way to ensure we don't have
- * heap corruption or double-freeing.
- *)
- Gc.compact ()
diff --git a/trunk/hivex/ocaml/t/hivex_300_fold.ml b/trunk/hivex/ocaml/t/hivex_300_fold.ml
deleted file mode 100644
index c8de6e8..0000000
--- a/trunk/hivex/ocaml/t/hivex_300_fold.ml
+++ /dev/null
@@ -1,52 +0,0 @@
-(* hivex OCaml bindings
- * Copyright (C) 2009-2010 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *)
-
-(* Fold over the large hive. *)
-
-open Unix
-open Printf
-let (//) = Filename.concat
-
-(* This is a generic function to fold over hives.
- * fn : 'a -> node -> 'a is called for each node
- * fv : 'a -> node -> value array -> 'a is called for the values at each node
- *)
-let hive_fold h fn fv a root =
- let rec fold a node =
- let a = fn a node in
- let a = fv a node (Hivex.node_values h node) in
- Array.fold_left fold a (Hivex.node_children h node)
- in
- fold a root
-
-let () =
- let h = Hivex.open_file ("../images/large") [] in
-
- (* Count the number of nodes and values in the hive. *)
- let count_node (nodes, values) _ = (nodes+1, values) in
- let count_values (nodes, values) _ vs = (nodes, values + Array.length vs) in
- let root = Hivex.root h in
- let (nodes, values) = hive_fold h count_node count_values (0, 0) root in
- printf "large test hive contains %d nodes and %d values\n%!" nodes values;
-
- Hivex.close h;
-
- (* Gc.compact is a good way to ensure we don't have
- * heap corruption or double-freeing.
- *)
- Gc.compact ()
diff --git a/trunk/hivex/perl/Makefile.PL.in b/trunk/hivex/perl/Makefile.PL.in
deleted file mode 100644
index 77b4a0e..0000000
--- a/trunk/hivex/perl/Makefile.PL.in
+++ /dev/null
@@ -1,31 +0,0 @@
-# hivex Perl bindings
-# Copyright (C) 2009-2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-use Config;
-use ExtUtils::MakeMaker;
-
-WriteMakefile (
- FIRST_MAKEFILE => 'Makefile-pl',
-
- NAME => 'Win::Hivex',
- VERSION => '@PACKAGE_VERSION@',
-
- LIBS => '-L@top_builddir@/lib/.libs -lhivex',
- INC => '-I@top_builddir@/lib -I@top_srcdir@/lib',
- TYPEMAPS => [ '@srcdir@/typemap' ],
- CCFLAGS => $Config{ccflags} . ' @CFLAGS@',
- );
diff --git a/trunk/hivex/perl/Makefile.am b/trunk/hivex/perl/Makefile.am
deleted file mode 100644
index 22dd98c..0000000
--- a/trunk/hivex/perl/Makefile.am
+++ /dev/null
@@ -1,66 +0,0 @@
-# hivex Perl bindings
-# Copyright (C) 2009-2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# Old RHEL 5 autoconf doesn't have builddir or abs_srcdir.
-builddir ?= $(top_builddir)/perl
-abs_srcdir ?= $(shell unset CDPATH; cd $(srcdir) && pwd)
-
-EXTRA_DIST = \
- Makefile.PL.in \
- run-perl-tests \
- lib/Win/Hivex.pm \
- lib/Win/Hivex/Regedit.pm \
- Hivex.xs \
- t/*.t \
- typemap
-
-if HAVE_PERL
-
-# Interfacing automake and ExtUtils::MakeMaker known to be
-# a nightmare, news at 11.
-
-# hivex source dependencies
-.PHONY: src_deps
-src_deps: $(top_builddir)/lib/libhivex.la
-
-TESTS = run-perl-tests
-
-$(TESTS): src_deps all
-
-TESTS_ENVIRONMENT = \
- LD_LIBRARY_PATH=$(top_builddir)/lib/.libs
-
-INSTALLDIRS = site
-
-all: Makefile-pl src_deps
- $(MAKE) -f Makefile-pl
-
-Makefile-pl: Makefile.PL
- -[ $(srcdir) != $(builddir) ] && cp -rsu $(abs_srcdir)/. $(builddir)/.
- perl Makefile.PL INSTALLDIRS=$(INSTALLDIRS) PREFIX=$(prefix)
-
-# No! Otherwise it is deleted before the clean-local rule runs.
-#CLEANFILES = Makefile-pl
-
-clean-local:
- -$(MAKE) -f Makefile-pl clean
- rm -f Makefile-pl Makefile-pl.old
-
-install-data-hook:
- $(MAKE) -f Makefile-pl DESTDIR=$(DESTDIR) install
-
-endif
diff --git a/trunk/hivex/perl/lib/Win/Hivex/Regedit.pm b/trunk/hivex/perl/lib/Win/Hivex/Regedit.pm
deleted file mode 100644
index 8914f9e..0000000
--- a/trunk/hivex/perl/lib/Win/Hivex/Regedit.pm
+++ /dev/null
@@ -1,687 +0,0 @@
-# Win::Hivex::Regedit
-# Copyright (C) 2009-2011 Red Hat Inc.
-# Derived from code by Petter Nordahl-Hagen under a compatible license:
-# Copyright (c) 1997-2007 Petter Nordahl-Hagen.
-# Derived from code by Markus Stephany under a compatible license:
-# Copyright (c)2000-2004, Markus Stephany.
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-=pod
-
-=head1 NAME
-
-Win::Hivex::Regedit - Helper for reading and writing regedit format files
-
-=head1 SYNOPSIS
-
- use Win::Hivex;
- use Win::Hivex::Regedit qw(reg_import reg_export);
-
- $h = Win::Hivex->open ('SOFTWARE', write => 1);
-
- open FILE, "updates.reg";
- reg_import (\*FILE, $h);
- $h->commit (undef);
-
- reg_export ($h, "\\Microsoft\\Windows NT\\CurrentVersion", \*OUTFILE,
- prefix => "HKEY_LOCAL_MACHINE\\SOFTWARE");
-
-=head1 DESCRIPTION
-
-Win::Hivex::Regedit is a helper library for reading and writing the
-Windows regedit (or C<.REG>) file format. This is the textual format
-that is commonly used on Windows for distributing groups of Windows
-Registry changes, and this format is read and written by the
-proprietary C<reg.exe> and C<regedit.exe> programs supplied with
-Windows. It is I<not> the same as the binary "hive" format which the
-hivex library itself can read and write. Note that the regedit format
-is not well-specified, and hence deviations can occur between what the
-Windows program can read/write and what we can read/write. (Please
-file bugs for any deviations found).
-
-Win::Hivex::Regedit is the low-level Perl library. There is also a
-command line tool for combining hive files and reg files
-(L<hivexregedit(1)>). If you have a Windows virtual machine that you need
-to merge regedit-format changes into, use the high-level
-L<virt-win-reg(1)> tool (part of libguestfs tools).
-
-=head2 FUNCTIONS
-
-=cut
-
-package Win::Hivex::Regedit;
-
-use strict;
-use warnings;
-
-use Carp qw(croak confess);
-use Encode qw(encode decode);
-
-require Exporter;
-
-use vars qw(@EXPORT_OK @ISA);
-
-@ISA = qw(Exporter);
-@EXPORT_OK = qw(reg_import reg_export);
-
-=head2 reg_import
-
- reg_import ($fh, ($h|$map), [encoding => "UTF-16LE"]);
-
-This function imports the registry keys from file handle C<$fh> either
-into the hive C<$h> or via a map function.
-
-The hive handle C<$h> must have been opened for writing, ie.
-using the C<write =E<gt> 1> flag to C<Win::Hivex-E<gt>open>.
-
-In the binary hive file, the first part of the key name (eg.
-C<HKEY_LOCAL_MACHINE\SOFTWARE>) is not stored. You just have to know
-(somehow) that this maps to the C<SOFTWARE> hive. Therefore if you
-are given a file containing a mixture of keys that have to be added to
-different hives, you have to have a way to map these to the hive
-handles. This is outside the scope of the hivex library, but if the
-second argument is a CODEREF (ie. reference to a function) then this
-C<$map> function is called on each key name:
-
- map ($keyname)
- ==> ($h, $keyname)
-
-As shown, the function should return a pair, hive handle, and the true
-key name (with the prefix stripped off). For example:
-
- sub map {
- if ($_[0] =~ /^HKEY_LOCAL_MACHINE\\SOFTWARE(.*)/i) {
- return ($software_h, $1);
- } else ...
- }
-
-C<encoding> is the encoding used by default for strings. If not
-specified, this defaults to C<"UTF-16LE">, however we highly advise
-you to specify it. See L</ENCODING STRINGS> below.
-
-As with the regedit program, we merge the new registry keys with
-existing ones, and new node values with old ones. You can use the
-C<-> (minus) character to delete individual keys and values. This is
-explained in detail in the Wikipedia page on the Windows Registry.
-
-Remember you need to call C<$h-E<gt>commit (undef)> on the hivex
-handle before any changes are written to the hive file. See
-L<hivex(3)/WRITING TO HIVE FILES>.
-
-=cut
-
-sub reg_import
-{
- local $_;
- my $fh = shift;
- my $hmap = shift;
- my %params = @_;
-
- my $encoding = $params{encoding} || "utf-16le";
-
- my $state = "outer";
- my $newnode;
- my @newvalues;
- my @delvalues;
- my $lineno = 0;
-
- while (<$fh>) {
- # Join continuation lines. This is recipe 8.1 from the Perl
- # Cookbook. Note we allow spaces after the final \ because
- # this is fairly common in pasted regedit files.
- $lineno++;
- chomp;
- if (s/\\\s*$//) {
- $_ .= <$fh>;
- redo unless eof ($fh);
- }
-
- #print STDERR "reg_import: parsing <<<$_>>>\n";
-
- if ($state eq "outer") {
- # Ignore blank lines, headers.
- next if /^\s*$/;
-
- # .* is needed before Windows Registry Editor Version.. in
- # order to eat a possible Unicode BOM which regedit writes
- # there.
- next if /^.*Windows Registry Editor Version.*/;
- next if /^REGEDIT/;
-
- # Ignore comments.
- next if /^\s*;/;
-
- # Expect to see [...] or [-...]
- # to merge or delete a node respectively.
- if (/^\[-(.*)\]\s*$/) {
- _delete_node ($hmap, \%params, $1);
- $state = "outer";
- } elsif (/^\[(.*)\]\s*$/) {
- $state = "inner";
- $newnode = $1;
- @newvalues = ();
- @delvalues = ();
- } else {
- croak (_unexpected ($_, $lineno));
- }
- } elsif ($state eq "inner") {
- if (/^(".*)=-\s*$/) { # delete value
- my $key = _parse_quoted_string ($_);
- croak (_parse_error ($_, $lineno)) unless defined $key;
- push @delvalues, $key;
- } elsif (/^@=-\s*$/) { # delete default key
- push @delvalues, "";
- } elsif (/^".*"=/) { # ordinary value
- my $value = _parse_key_value ($_, $encoding);
- croak (_parse_error ($_, $lineno)) unless defined $value;
- push @newvalues, $value;
- } elsif (/^@=(.*)/) { # default key
- my $value = _parse_value ("", $1, $encoding);
- croak (_parse_error ($_, $lineno)) unless defined $value;
- push @newvalues, $value;
- } elsif (/^\s*$/) { # blank line after values
- _merge_node ($hmap, \%params, $newnode, \@newvalues, \@delvalues);
- $state = "outer";
- } else {
- croak (_unexpected ($_, $lineno));
- }
- }
- } # while
-
- # Still got a node left over to merge?
- if ($state eq "inner") {
- _merge_node ($hmap, \%params, $newnode, \@newvalues, \@delvalues);
- }
-}
-
-sub _parse_key_value
-{
- local $_ = shift;
- my $encoding = shift;
- my $key;
- ($key, $_) = _parse_quoted_string ($_);
- return undef unless defined $key;
- return undef unless substr ($_, 0, 1) eq "=";
- return _parse_value ($key, substr ($_, 1), $encoding);
-}
-
-# Parse a double-quoted string, returning the string. \ is used to
-# escape double-quotes and other backslash characters.
-#
-# If called in array context and if there is anything after the quoted
-# string, it is returned as the second element of the array.
-#
-# Returns undef if there was a parse error.
-sub _parse_quoted_string
-{
- local $_ = shift;
-
- # No initial quote character.
- return undef if substr ($_, 0, 1) ne "\"";
-
- my $i;
- my $out = "";
- for ($i = 1; $i < length; ++$i) {
- my $c = substr ($_, $i, 1);
- if ($c eq "\"") {
- last
- } elsif ($c eq "\\") {
- $i++;
- $c = substr ($_, $i, 1);
- $out .= $c;
- } else {
- $out .= $c;
- }
- }
-
- # No final quote character.
- return undef if $i == length;
-
- $_ = substr ($_, $i+1);
- if (wantarray) {
- return ($out, $_);
- } else {
- return $out;
- }
-}
-
-# Parse the value, optionally prefixed by a type.
-
-sub _parse_value
-{
- local $_;
- my $key = shift;
- $_ = shift;
- my $encoding = shift; # default encoding for strings
-
- my $type;
- my $data;
-
- if (m/^dword:([[:xdigit:]]{8})$/) { # DWORD
- $type = 4;
- $data = _dword_le (hex ($1));
- } elsif (m/^hex:(.*)$/) { # hex digits
- $type = 3;
- $data = _data_from_hex_digits ($1);
- return undef unless defined $data;
- } elsif (m/^hex\(([[:xdigit:]]+)\):(.*)$/) { # hex digits
- $type = hex ($1);
- $data = _data_from_hex_digits ($2);
- return undef unless defined $data;
- } elsif (m/^str:(".*")$/) { # only in Wine fake-registries, I think
- $type = 1;
- $data = _parse_quoted_string ($1);
- return undef unless defined $data;
- $data .= "\0"; # Value strings are implicitly ASCIIZ.
- $data = encode ($encoding, $data);
- } elsif (m/^str\(([[:xdigit:]]+)\):(".*")$/) {
- $type = hex ($1);
- $data = _parse_quoted_string ($2);
- return undef unless defined $data;
- $data .= "\0"; # Value strings are implicitly ASCIIZ.
- $data = encode ($encoding, $data);
- } elsif (m/^(".*")$/) {
- $type = 1;
- $data = _parse_quoted_string ($1);
- return undef unless defined $data;
- $data .= "\0"; # Value strings are implicitly ASCIIZ.
- $data = encode ($encoding, $data);
- } else {
- return undef;
- }
-
- my %h = ( key => $key, t => $type, value => $data );
- return \%h;
-}
-
-sub _dword_le
-{
- pack ("V", $_[0]);
-}
-
-sub _data_from_hex_digits
-{
- local $_ = shift;
- s/[,[:space:]]//g;
- pack ("H*", $_)
-}
-
-sub _merge_node
-{
- local $_;
- my $hmap = shift;
- my $params = shift;
- my $path = shift;
- my $newvalues = shift;
- my $delvalues = shift;
-
- my $h;
- ($h, $path) = _map_handle ($hmap, $path);
-
- my $node = _node_lookup ($h, $path);
- if (!defined $node) { # Need to create this node.
- my $name = $path;
- $name = $1 if $path =~ /([^\\]+)$/;
- my $parentpath = $path;
- $parentpath =~ s/[^\\]+$//;
- my $parent = _node_lookup ($h, $parentpath);
- if (!defined $parent) {
- confess "reg_import: cannot create $path since parent $parentpath does not exist"
- }
- $node = $h->node_add_child ($parent, $name);
- }
-
- # Get the current set of values at this node.
- my @values = $h->node_values ($node);
-
- # Delete values in @delvalues original and values that are going
- # to be replaced.
- my @delvalues = @$delvalues;
- foreach (@$newvalues) {
- push @delvalues, $_->{key};
- }
- @values = grep { ! _imember ($h->value_key ($_), @delvalues) } @values;
-
- # Get the actual values from the hive.
- @values = map {
- my $key = $h->value_key ($_);
- my ($type, $data) = $h->value_value ($_);
- my %h = ( key => $key, t => $type, value => $data );
- $_ = \%h;
- } @values;
-
- # Add the new values.
- push @values, @$newvalues;
-
- $h->node_set_values ($node, \@values);
-}
-
-sub _delete_node
-{
- local $_;
- my $hmap = shift;
- my $params = shift;
- my $path = shift;
-
- my $h;
- ($h, $path) = _map_handle ($hmap, $path);
-
- my $node = _node_lookup ($h, $path);
- # Not an error to delete a non-existant node.
- return unless defined $node;
-
- # However you cannot delete the root node.
- confess "reg_import: the root node of a hive cannot be deleted"
- if $node == $h->root ();
-
- $h->node_delete_child ($node);
-}
-
-# Call the map function, if necessary.
-sub _map_handle
-{
- local $_; # called function may use this
- my $hmap = shift;
- my $path = shift;
- my $h = $hmap;
-
- if (ref ($hmap) eq "CODE") {
- ($h, $path) = &$hmap ($path);
- }
- return ($h, $path);
-}
-
-sub _imember
-{
- local $_;
- my $item = shift;
-
- foreach (@_) {
- return 1 if lc ($_) eq lc ($item);
- }
- return 0;
-}
-
-sub _unexpected
-{
- local $_ = shift;
- my $lineno = shift;
-
- "reg_import: parse error: unexpected text found at line $lineno near\n$_"
-}
-
-sub _parse_error
-{
- local $_ = shift;
- my $lineno = shift;
-
- "reg_import: parse error: at line $lineno near\n$_"
-}
-
-=head2 reg_export
-
- reg_export ($h, $key, $fh,
- [prefix => $prefix],
- [unsafe_printable_strings => 1]);
-
-This function exports the registry keys starting at the root
-C<$key> and recursively downwards into the file handle C<$fh>.
-
-C<$key> is a case-insensitive path of the node to start from, relative
-to the root of the hive. It is an error if this path does not exist.
-Path elements should be separated by backslash characters.
-
-C<$prefix> is prefixed to each key name. The usual use for this is to
-make key names appear as they would on Windows. For example the key
-C<\Foo> in the SOFTWARE Registry, with $prefix
-C<HKEY_LOCAL_MACHINE\SOFTWARE>, would be written as:
-
- [HKEY_LOCAL_MACHINE\SOFTWARE\Foo]
- "Key 1"=...
- "Key 2"=...
-
-If C<unsafe_printable_strings> is not given or is false, then the
-output is written as pure 7 bit ASCII, with line endings which are the
-default for the local host. Strings are always encoded as hex bytes.
-This is safe because it preserves the original content and encoding of
-strings. See L</ENCODING STRINGS> below.
-
-If C<unsafe_printable_strings> is true, then strings are assumed to be
-UTF-16LE and are converted to UTF-8 for output. The final zero
-codepoint in the string is removed if there is one. This is unsafe
-because it does not preserve the fidelity of the strings in the
-Registry and because the content type of strings is not always
-UTF-16LE. However it is useful if you just want to display strings
-for quick hacking and debugging.
-
-You may need to convert the file's encoding using L<iconv(1)> and line
-endings using L<unix2dos(1)> if sending to a Windows user.
-
-Nodes and keys are sorted alphabetically in the output.
-
-This function does I<not> print a header. The real regedit program
-will print a header like:
-
- Windows Registry Editor Version 5.00
-
-followed by a blank line. (Other headers are possible, see the
-Wikipedia page on the Windows Registry). If you want a header, you
-need to write it out yourself.
-
-=cut
-
-sub reg_export
-{
- my $h = shift;
- my $key = shift;
-
- my $node = _node_lookup ($h, $key);
- croak "$key: path not found in this hive" unless $node;
-
- reg_export_node ($h, $node, @_);
-}
-
-=head2 reg_export_node
-
- reg_export_node ($h, $node, $fh, ...);
-
-This is exactly the same as L</reg_export> except that instead
-of specifying the path to a key as a string, you pass a hivex
-library C<$node> handle.
-
-=cut
-
-sub reg_export_node
-{
- local $_;
- my $h = shift;
- my $node = shift;
- my $fh = shift;
- my %params = @_;
-
- confess "reg_export_node: \$node parameter was undef" unless defined $node;
-
- # Get the canonical path of this node.
- my $path = _node_canonical_path ($h, $node);
-
- # Print the path.
- print $fh "[";
- my $prefix = $params{prefix};
- if (defined $prefix) {
- chop $prefix if substr ($prefix, -1, 1) eq "\\";
- print $fh $prefix;
- }
- print $fh $path;
- print $fh "]\n";
-
- my $unsafe_printable_strings = $params{unsafe_printable_strings};
-
- # Get the values.
- my @values = $h->node_values ($node);
-
- foreach (@values) {
- use bytes;
-
- my $key = $h->value_key ($_);
- my ($type, $data) = $h->value_value ($_);
- $_ = { key => $key, type => $type, data => $data }
- }
-
- @values = sort { $a->{key} cmp $b->{key} } @values;
-
- # Print the values.
- foreach (@values) {
- my $key = $_->{key};
- my $type = $_->{type};
- my $data = $_->{data};
-
- if ($key eq "") {
- print $fh '@=' # default key
- } else {
- print $fh '"', _escape_quotes ($key), '"='
- }
-
- if ($type eq 4 && length ($data) == 4) { # only handle dword specially
- my $dword = unpack ("V", $data);
- printf $fh "dword:%08x\n", $dword
- } elsif ($unsafe_printable_strings && ($type eq 1 || $type eq 2)) {
- # Guess that the encoding is UTF-16LE. Convert it to UTF-8
- # for printing.
- $data = decode ("utf16le", $data);
- $data =~ s/\x{0}$//; # remove final zero codepoint
- $data =~ s/"/\\"/g; # XXX more quoting needed?
- printf $fh "str(%x):\"%s\"\n", $type, $data;
- } else {
- # Encode everything else as hex, see encoding section below.
- printf $fh "hex(%x):", $type;
- my $hex = join (",", map { sprintf "%02x", ord } split (//, $data));
- print $fh "$hex\n"
- }
- }
- print $fh "\n";
-
- my @children = $h->node_children ($node);
- @children = sort { $h->node_name ($a) cmp $h->node_name ($b) } @children;
- reg_export_node ($h, $_, $fh, @_) foreach @children;
-}
-
-# Escape " and \ when printing keys.
-sub _escape_quotes
-{
- local $_ = shift;
- s/\\/\\\\/g;
- s/"/\\"/g;
- $_;
-}
-
-# Look up a node in the registry starting from the path.
-# Return undef if it doesn't exist.
-
-sub _node_lookup
-{
- local $_;
- my $h = shift;
- my $path = shift;
-
- my @path = split /\\/, $path;
- shift @path if @path > 0 && $path[0] eq "";
-
- my $node = $h->root ();
- foreach (@path) {
- $node = $h->node_get_child ($node, $_);
- return undef unless defined $node;
- }
-
- return $node;
-}
-
-# Return the canonical path of node in the hive.
-
-sub _node_canonical_path
-{
- local $_;
- my $h = shift;
- my $node = shift;
-
- return "\\" if $node == $h->root ();
- $_ = $h->node_name ($node);
- my $parent = $h->node_parent ($node);
- my $path = _node_canonical_path ($h, $parent);
- if ($path eq "\\") {
- return "$path$_"
- } else {
- return "$path\\$_"
- }
-}
-
-=head1 ENCODING STRINGS
-
-The situation with encoding strings in the Registry on Windows is very
-confused. There are two main encodings that you would find in the
-binary (hive) file, 7 bit ASCII and UTF-16LE. (Other encodings are
-possible, it's also possible to have arbitrary binary data incorrectly
-marked with a string type).
-
-The hive file itself doesn't contain any indication of string
-encoding. Windows probably guesses the encoding.
-
-We think that regedit probably either guesses which encoding to use
-based on the file encoding, or else has different defaults for
-different versions of Windows. Neither choice is appropriate for a
-tool used in a real operating system.
-
-When using L</reg_import>, you should specify the default encoding for
-strings using the C<encoding> parameter. If not specified, it
-defaults to UTF-16LE.
-
-The file itself that is imported should be in the local encoding for
-files (usually UTF-8 on modern Linux systems). This means if you
-receive a regedit file from a Windows system, you may sometimes have
-to reencode it:
-
- iconv -f utf-16le -t utf-8 < input.reg | dos2unix > output.reg
-
-When writing regedit files (L</reg_export>) we bypass this madness
-completely. I<All> strings (even pure ASCII) are written as hex bytes
-so there is no doubt about how they should be encoded when they are
-read back in.
-
-=cut
-
-1;
-
-=head1 COPYRIGHT
-
-Copyright (C) 2010-2011 Red Hat Inc.
-
-=head1 LICENSE
-
-Please see the file COPYING.LIB for the full license.
-
-=head1 SEE ALSO
-
-L<Win::Hivex(3)>,
-L<hivexregedit(1)>,
-L<virt-win-reg(1)>,
-L<iconv(1)>,
-L<dos2unix(1)>,
-L<unix2dos(1)>,
-L<hivex(3)>,
-L<hivexsh(1)>,
-L<http://libguestfs.org>,
-L<Sys::Guestfs(3)>.
-
-=cut
diff --git a/trunk/hivex/perl/run-perl-tests b/trunk/hivex/perl/run-perl-tests
deleted file mode 100755
index 770df94..0000000
--- a/trunk/hivex/perl/run-perl-tests
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh -
-# hivex Perl bindings
-# Copyright (C) 2009-2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-set -e
-
-make -f Makefile-pl test "$@"
diff --git a/trunk/hivex/perl/t/005-pod.t b/trunk/hivex/perl/t/005-pod.t
deleted file mode 100644
index 8fef583..0000000
--- a/trunk/hivex/perl/t/005-pod.t
+++ /dev/null
@@ -1,24 +0,0 @@
-# hivex Perl bindings -*- perl -*-
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-use Test::More;
-use strict;
-use warnings;
-
-eval "use Test::Pod 1.00";
-plan skip_all => "Test::Pod 1.00 required for testing POD" if $@;
-all_pod_files_ok ();
diff --git a/trunk/hivex/perl/t/006-pod-coverage.t b/trunk/hivex/perl/t/006-pod-coverage.t
deleted file mode 100644
index bcfb6d8..0000000
--- a/trunk/hivex/perl/t/006-pod-coverage.t
+++ /dev/null
@@ -1,24 +0,0 @@
-# hivex Perl bindings -*- perl -*-
-# Copyright (C) 2009 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-use Test::More;
-use strict;
-use warnings;
-
-eval "use Test::Pod::Coverage 1.00";
-plan skip_all => "Test::Pod::Coverage 1.00 required for testing POD" if $@;
-all_pod_coverage_ok ();
diff --git a/trunk/hivex/perl/t/010-load.t b/trunk/hivex/perl/t/010-load.t
deleted file mode 100644
index 9abcdc8..0000000
--- a/trunk/hivex/perl/t/010-load.t
+++ /dev/null
@@ -1,24 +0,0 @@
-# hivex Perl bindings -*- perl -*-
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-use strict;
-use warnings;
-use Test::More tests => 1;
-
-BEGIN {
- use_ok ("Win::Hivex");
-}
diff --git a/trunk/hivex/perl/t/020-open.t b/trunk/hivex/perl/t/020-open.t
deleted file mode 100644
index b3c58f0..0000000
--- a/trunk/hivex/perl/t/020-open.t
+++ /dev/null
@@ -1,27 +0,0 @@
-# hivex Perl bindings -*- perl -*-
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-use strict;
-use warnings;
-use Test::More tests => 1;
-
-use Win::Hivex;
-
-my $srcdir = $ENV{srcdir} || ".";
-
-my $h = Win::Hivex->open ("$srcdir/../images/minimal");
-ok ($h);
diff --git a/trunk/hivex/perl/t/021-close.t b/trunk/hivex/perl/t/021-close.t
deleted file mode 100644
index f6388fc..0000000
--- a/trunk/hivex/perl/t/021-close.t
+++ /dev/null
@@ -1,31 +0,0 @@
-# hivex Perl bindings -*- perl -*-
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-use strict;
-use warnings;
-use Test::More tests => 2;
-
-use Win::Hivex;
-
-my $srcdir = $ENV{srcdir} || ".";
-
-# Put it in a block so the handle gets destroyed as well.
-{
- my $h = Win::Hivex->open ("$srcdir/../images/minimal");
- ok ($h);
-}
-ok (1);
diff --git a/trunk/hivex/perl/t/120-rlenvalue.t b/trunk/hivex/perl/t/120-rlenvalue.t
deleted file mode 100644
index 70e9060..0000000
--- a/trunk/hivex/perl/t/120-rlenvalue.t
+++ /dev/null
@@ -1,46 +0,0 @@
-# hivex Perl bindings -*- perl -*-
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# Demonstrate value_data_cell_offset by looking at the value data at
-# "\$$$PROTO.HIV\ModerateValueParent\33Bytes", verified to be at file
-# offset 8680 (0x21e8) of the hive rlenvalue_test_hive. The returned
-# length and offset for this value cell should be 37 bytes, position
-# 8712.
-
-use strict;
-use warnings;
-use Test::More tests => 5;
-
-use Win::Hivex;
-
-my $srcdir = $ENV{srcdir} || ".";
-
-my $h = Win::Hivex->open ("$srcdir/../images/rlenvalue_test_hive");
-ok ($h);
-
-my $root = $h->root ();
-ok ($root);
-
-my $moderate_value_node = $h->node_get_child ($root, "ModerateValueParent");
-
-my $moderate_value_value = $h->node_get_value ($moderate_value_node, "33Bytes");
-
-my ($off, $len) = $h->value_data_cell_offset ($moderate_value_value);
-ok ($off == 37);
-ok ($len == 8712);
-
-ok (1);
diff --git a/trunk/hivex/perl/t/200-write.t b/trunk/hivex/perl/t/200-write.t
deleted file mode 100644
index e7fd570..0000000
--- a/trunk/hivex/perl/t/200-write.t
+++ /dev/null
@@ -1,49 +0,0 @@
-# hivex Perl bindings -*- perl -*-
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-use strict;
-use warnings;
-use Test::More tests => 6;
-
-use Win::Hivex;
-
-my $srcdir = $ENV{srcdir} || ".";
-
-my $h = Win::Hivex->open ("$srcdir/../images/minimal", write => 1);
-ok ($h);
-
-my $root = $h->root ();
-ok ($root);
-
-$h->node_add_child ($root, "A");
-ok (1);
-
-$h->node_add_child ($root, "B");
-ok (1);
-
-my $b = $h->node_get_child ($root, "B");
-ok ($b);
-
-my $values = [
- { key => "Key1", t => 3, value => "ABC" },
- { key => "Key2", t => 3, value => "DEF" }
- ];
-$h->node_set_values ($b, $values);
-ok (1);
-
-# don't commit because that would overwrite the original file
-# $h->commit ();
diff --git a/trunk/hivex/perl/t/210-setvalue.t b/trunk/hivex/perl/t/210-setvalue.t
deleted file mode 100644
index 8e24121..0000000
--- a/trunk/hivex/perl/t/210-setvalue.t
+++ /dev/null
@@ -1,65 +0,0 @@
-# hivex Perl bindings -*- perl -*-
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-use strict;
-use warnings;
-use Test::More tests => 11;
-
-use Win::Hivex;
-
-my $srcdir = $ENV{srcdir} || ".";
-
-my $h = Win::Hivex->open ("$srcdir/../images/minimal", write => 1);
-ok ($h);
-
-my $root = $h->root ();
-ok ($root);
-
-$h->node_add_child ($root, "B");
-ok (1);
-
-my $b = $h->node_get_child ($root, "B");
-ok ($b);
-
-my $values = [
- { key => "Key1", t => 3, value => "ABC" },
- { key => "Key2", t => 3, value => "DEF" }
- ];
-$h->node_set_values ($b, $values);
-ok (1);
-
-my $value1 = { key => "Key3", t => 3, value => "GHI" };
-$h->node_set_value ($b, $value1);
-ok (1);
-
-my $value2 = { key => "Key1", t => 3, value => "JKL" };
-$h->node_set_value ($b, $value2);
-ok (1);
-
-my ($val, $t, $data);
-$val = $h->node_get_value ($b, "Key1");
-($t, $data) = $h->value_value ($val);
-ok ($t == 3);
-ok ($data eq "JKL");
-
-$val = $h->node_get_value ($b, "Key3");
-($t, $data) = $h->value_value ($val);
-ok ($t == 3);
-ok ($data eq "GHI");
-
-# don't commit because that would overwrite the original file
-# $h->commit ();
diff --git a/trunk/hivex/perl/t/510-regedit-load.t b/trunk/hivex/perl/t/510-regedit-load.t
deleted file mode 100644
index feebe42..0000000
--- a/trunk/hivex/perl/t/510-regedit-load.t
+++ /dev/null
@@ -1,24 +0,0 @@
-# Win::Hivex::Regedit tests -*- perl -*-
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-use strict;
-use warnings;
-use Test::More tests => 1;
-
-BEGIN {
- use_ok ("Win::Hivex::Regedit");
-}
diff --git a/trunk/hivex/perl/t/550-regedit-export.t b/trunk/hivex/perl/t/550-regedit-export.t
deleted file mode 100644
index 2099157..0000000
--- a/trunk/hivex/perl/t/550-regedit-export.t
+++ /dev/null
@@ -1,102 +0,0 @@
-# Win::Hivex::Regedit test -*- perl -*-
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-use strict;
-use warnings;
-
-use Encode qw(from_to);
-use IO::Scalar;
-
-use Test::More tests => 8;
-
-use Win::Hivex;
-use Win::Hivex::Regedit qw(reg_export);
-
-my $srcdir = $ENV{srcdir} || ".";
-
-my $h = Win::Hivex->open ("$srcdir/../images/minimal", write => 1);
-ok ($h);
-
-my $root = $h->root ();
-ok ($root);
-
-$h->node_add_child ($root, "B");
-ok (1);
-
-$h->node_add_child ($root, "A");
-ok (1);
-
-my $b = $h->node_get_child ($root, "B");
-ok ($b);
-
-# Encode a string as UTF16-LE.
-sub utf16le
-{
- my $s = shift;
- from_to ($s, "ascii", "utf-16le");
- $s;
-}
-
-# Convert a 32 bit integer to a little endian 4 byte data field.
-sub dwordle
-{
- pack ("V", $_[0]);
-}
-
-my @values = (
- # Values are entered in a random order here, but they should be
- # sorted on export.
- { key => "Key2", t => 2, value => utf16le ("DEF") },
- { key => "", t => 1, value => "Default" },
- { key => "Key3", t => 4, value => dwordle (0xff876543) },
- { key => "Key1", t => 1, value => "ABC" },
- );
-$h->node_set_values ($b, \@values);
-ok (1);
-
-my $fh = new IO::Scalar;
-reg_export ($h, "\\", $fh, prefix => "HKEY_LOCAL_MACHINE\\SOFTWARE\\");
-
-my $expected = '[HKEY_LOCAL_MACHINE\\SOFTWARE\\]
-
-[HKEY_LOCAL_MACHINE\\SOFTWARE\\A]
-
-[HKEY_LOCAL_MACHINE\\SOFTWARE\\B]
-@=hex(1):44,65,66,61,75,6c,74
-"Key1"=hex(1):41,42,43
-"Key2"=hex(2):44,00,45,00,46,00
-"Key3"=dword:ff876543
-
-';
-
-ok (${$fh->sref} eq $expected);
-
-$fh = new IO::Scalar;
-reg_export ($h, "\\B", $fh);
-
-$expected = '[\\B]
-@=hex(1):44,65,66,61,75,6c,74
-"Key1"=hex(1):41,42,43
-"Key2"=hex(2):44,00,45,00,46,00
-"Key3"=dword:ff876543
-
-';
-
-ok (${$fh->sref} eq $expected);
-
-# don't commit because that would overwrite the original file
-# $h->commit ();
diff --git a/trunk/hivex/perl/t/560-regedit-import.t b/trunk/hivex/perl/t/560-regedit-import.t
deleted file mode 100644
index effb024..0000000
--- a/trunk/hivex/perl/t/560-regedit-import.t
+++ /dev/null
@@ -1,161 +0,0 @@
-# Win::Hivex::Regedit test -*- perl -*-
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-use strict;
-use warnings;
-
-use IO::Scalar;
-
-use Test::More tests => 16;
-
-use Win::Hivex;
-use Win::Hivex::Regedit qw(reg_import reg_export);
-
-my $srcdir = $ENV{srcdir} || ".";
-
-my $h = Win::Hivex->open ("$srcdir/../images/minimal", write => 1);
-ok ($h);
-
-my ($data, $expected);
-
-# Note that we don't clear the hive between tests, so results of
-# next test depend on the previous test.
-
-$data = '
-[\A]
-
-[\B]
-
-[\C]
-"Key1"=hex(2):48,00,65,00,6c,00,6c,00,6f,00
-"Key2"=str(2):"Hello"
-"Key3"=hex:48,00,65,00,6c,00,6c,00,6f,00,\
- 48,00,65,00,6c,00,6c,00,6f,00
-"Key4"=dword:ff123456';
-$expected = '[\]
-
-[\A]
-
-[\B]
-
-[\C]
-"Key1"=hex(2):48,00,65,00,6c,00,6c,00,6f,00
-"Key2"=hex(2):48,00,65,00,6c,00,6c,00,6f,00,00,00
-"Key3"=hex(3):48,00,65,00,6c,00,6c,00,6f,00,48,00,65,00,6c,00,6c,00,6f,00
-"Key4"=dword:ff123456
-
-';
-
-run_test ($data, $expected);
-
-$data = '
-[\A]
-@="Hello"
-
-[-\B]
-';
-$expected = '[\]
-
-[\A]
-@=hex(1):48,00,65,00,6c,00,6c,00,6f,00,00,00
-
-[\C]
-"Key1"=hex(2):48,00,65,00,6c,00,6c,00,6f,00
-"Key2"=hex(2):48,00,65,00,6c,00,6c,00,6f,00,00,00
-"Key3"=hex(3):48,00,65,00,6c,00,6c,00,6f,00,48,00,65,00,6c,00,6c,00,6f,00
-"Key4"=dword:ff123456
-
-';
-
-run_test ($data, $expected);
-
-$data = '
-[\A]
-@=-
-
-[-\C]
-
-[\A\B]
-';
-$expected = '[\]
-
-[\A]
-
-[\A\B]
-
-';
-
-run_test ($data, $expected);
-
-# In the next test, the value of ValueContainingEscapes in the
-# imported data is \\W\\, which will become \W\ in the final hive.
-# However Perl has complex and inconsistent rules on quoting
-# backslashes. See:
-# http://en.wikibooks.org/wiki/Perl_Programming/Strings#Single_Quoted_Strings
-$data = '
-[\A]
-"NotExistant"=-
-
-[\A\B]
-"Key\"Containing\"Quotes"=hex(0):
-"ValueContainingEscapes"="\\\\W\\\\"
-';
-$expected = '[\]
-
-[\A]
-
-[\A\B]
-"Key\"Containing\"Quotes"=hex(0):
-"ValueContainingEscapes"=hex(1):5c,00,57,00,5c,00,00,00
-
-';
-
-run_test ($data, $expected);
-
-$data = '
-[\A\B]
-"Key\"Containing\"Quotes"=-
-"ValueContainingEscapes"=-
-
-[-\A]
-';
-$expected = '[\]
-
-';
-
-run_test ($data, $expected);
-
-#----------------------------------------------------------------------
-
-sub run_test {
- my $data = shift;
- my $expected = shift;
-
- my $fh = new IO::Scalar \$data;
- reg_import ($fh, $h);
- ok (1);
-
- $fh = new IO::Scalar;
- reg_export ($h, "\\", $fh);
- ok (1);
-
- my $actual = ${$fh->sref};
- warn "\n\n----- ACTUAL -----\n$actual\n----- EXPECTED -----\n$expected\n\n"
- if $actual ne $expected;
-
- ok ($actual eq $expected)
-}
diff --git a/trunk/hivex/perl/t/570-regedit-import2.t b/trunk/hivex/perl/t/570-regedit-import2.t
deleted file mode 100644
index a952fb0..0000000
--- a/trunk/hivex/perl/t/570-regedit-import2.t
+++ /dev/null
@@ -1,82 +0,0 @@
-# Win::Hivex::Regedit test -*- perl -*-
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-use strict;
-use warnings;
-
-use Encode qw(from_to);
-use IO::Scalar;
-
-use Test::More tests => 6;
-
-use Win::Hivex;
-use Win::Hivex::Regedit qw(reg_import reg_export);
-
-my $srcdir = $ENV{srcdir} || ".";
-
-my $h = Win::Hivex->open ("$srcdir/../images/minimal", write => 1);
-ok ($h);
-
-my $data;
-
-# Note: These tests are supposed to fail.
-
-# Need a blank line between sections.
-$data = '
-[A]
-[B]';
-run_test ($data);
-
-# Invalid header.
-$data = '
-[A]B';
-run_test ($data);
-
-# Must create intermediate nodes first.
-$data = '
-[A\B\C\D]';
-run_test ($data);
-
-# Invalid quoting.
-$data = '
-[A]
-"Quote"it"="Hello"';
-run_test ($data);
-
-$data = '
-[A]
-"Quote it\"="Hello"';
-run_test ($data);
-
-# Invalid hex -- fails, 'pack' processes it anyway.
-#$data = '
-#[A]
-#"Key"=hex(1):xy';
-#run_test ($data);
-
-#----------------------------------------------------------------------
-
-sub run_test {
- my $data = shift;
-
- eval {
- my $fh = new IO::Scalar \$data;
- reg_import ($h, $fh);
- };
- #warn "$@\n";
- ok ($@);
-}
diff --git a/trunk/hivex/perl/typemap b/trunk/hivex/perl/typemap
deleted file mode 100644
index c29c02d..0000000
--- a/trunk/hivex/perl/typemap
+++ /dev/null
@@ -1,18 +0,0 @@
-TYPEMAP
-char * T_PV
-const char * T_PV
-hive_h * O_OBJECT_hive_h
-int64_t T_IV
-
-INPUT
-O_OBJECT_hive_h
- if (sv_isobject ($arg) && SvTYPE (SvRV ($arg)) == SVt_PVMG)
- $var = ($type) SvIV ((SV *) SvRV ($arg));
- else {
- warn (\"${Package}::$func_name(): $var is not a blessed SV reference\");
- XSRETURN_UNDEF;
- }
-
-OUTPUT
-O_OBJECT_hive_h
- sv_setref_pv ($arg, "Win::Hivex", (void *) $var);
diff --git a/trunk/hivex/po/POTFILES.in b/trunk/hivex/po/POTFILES.in
deleted file mode 100644
index 3e02786..0000000
--- a/trunk/hivex/po/POTFILES.in
+++ /dev/null
@@ -1,2 +0,0 @@
-sh/hivexsh.c
-xml/hivexml.c
diff --git a/trunk/hivex/po/es.po b/trunk/hivex/po/es.po
deleted file mode 100644
index 7092ecd..0000000
--- a/trunk/hivex/po/es.po
+++ /dev/null
@@ -1,178 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hivex\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-10-11 12:43+0100\n"
-"PO-Revision-Date: 2011-03-22 15:29+0000\n"
-"Last-Translator: rjones <rjones@redhat.com>\n"
-"Language-Team: Spanish (Castilian) <trans-es@lists.fedoraproject.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
-
-#: sh/hivexsh.c:156
-#, c-format
-msgid ""
-"\n"
-"Welcome to hivexsh, the hivex interactive shell for examining\n"
-"Windows Registry binary hive files.\n"
-"\n"
-"Type: 'help' for help summary\n"
-" 'quit' to quit the shell\n"
-"\n"
-msgstr ""
-"\n"
-"Bienvenido a hivexsh, el entorno interactivo de hivex para examinar\n"
-"archivos binarios hive de registro Windows.\n"
-"\n"
-"Ingrese: 'help' para obtener ayuda\n"
-" 'quit' para abandonar este entorno\n"
-"\n"
-
-#: sh/hivexsh.c:270
-#, c-format
-msgid "hivexsh: error getting parent of node %zu\n"
-msgstr "hivexsh: error al intentar obtener padre del nodo %zu\n"
-
-#: sh/hivexsh.c:280
-#, c-format
-msgid "hivexsh: error getting node name of node %zx\n"
-msgstr "hivexsh: error al intentar obtener el nombre-nodo del nodo %zu\n"
-
-#: sh/hivexsh.c:419
-#, c-format
-msgid "hivexsh: you must load a hive file first using 'load hivefile'\n"
-msgstr "hivexsh: debe caragr un archivo hive utilizando 'load hivefile'\n"
-
-#: sh/hivexsh.c:440
-#, c-format
-msgid "hivexsh: unknown command '%s', use 'help' for help summary\n"
-msgstr "hivexsh: comando '%s' desconocido, utilice 'help' para obtener ayuda\n"
-
-#: sh/hivexsh.c:450
-#, c-format
-msgid "hivexsh: load: no hive file name given to load\n"
-msgstr ""
-"hivexsh: cargar: no se ha indicado un nombre de archivo hive para cargar\n"
-
-#: sh/hivexsh.c:466
-#, c-format
-msgid ""
-"hivexsh: failed to open hive file: %s: %m\n"
-"\n"
-"If you think this file is a valid Windows binary hive file (_not_\n"
-"a regedit *.reg file) then please run this command again using the\n"
-"hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-"which fails into a bug report at https://bugzilla.redhat.com/\n"
-"\n"
-msgstr ""
-"hivexsh: falló al intentar abrir el archivo hive: %s: %m\n"
-"\n"
-"Si considera que este archivo es un archivo hive binario de windows válido\n"
-"(_no_ un archivo regedit *.reg), entonces por favor ejecute el siguiente "
-"comando\n"
-"nuevamente, utilizando la opción hivexsh '-d', y adjunte la salida completa "
-"_y_\n"
-"el archivo hive que ha fallado, en un reporte de error en https://bugzilla."
-"redhat.com/\n"
-"\n"
-
-#: sh/hivexsh.c:499 sh/hivexsh.c:608 sh/hivexsh.c:1074
-#, c-format
-msgid "hivexsh: '%s' command should not be given arguments\n"
-msgstr "hivexsh: el comando '%s' no debería necesitar argumentos\n"
-
-#: sh/hivexsh.c:541
-#, c-format
-msgid ""
-"%s: %s: \\ characters in path are doubled - are you escaping the path "
-"parameter correctly?\n"
-msgstr ""
-"%s: %s: \\ los caracteres en la ruta se encuentran duplicados - ¿está "
-"escapando el parámetro correctamente?\n"
-
-#: sh/hivexsh.c:579
-#, c-format
-msgid "hivexsh: cd: subkey '%s' not found\n"
-msgstr "hivexsh: cd: no se encuentra la subllave '%s'\n"
-
-#: sh/hivexsh.c:597
-#, c-format
-msgid ""
-"Navigate through the hive's keys using the 'cd' command, as if it\n"
-"contained a filesystem, and use 'ls' to list the subkeys of the\n"
-"current key. Full documentation is in the hivexsh(1) manual page.\n"
-msgstr ""
-"Desplácese a través de las llaves hive utilizando el comando 'cd',\n"
-"como si fuera un sistema de archivos, y utilice 'ls' para listar las\n"
-"subllaves de la llave actual. Puede encontrar documentación completa\n"
-"en la página man de hivexsh(1).\n"
-
-#: sh/hivexsh.c:672
-#, c-format
-msgid "%s: %s: key not found\n"
-msgstr "%s: %s: no se ha encontrado la llave\n"
-
-#: sh/hivexsh.c:848 sh/hivexsh.c:952 sh/hivexsh.c:978 sh/hivexsh.c:1007
-#, c-format
-msgid "%s: %s: invalid integer parameter (%s returned %d)\n"
-msgstr "%s: %s: parámetro entero no válido (%s devolvió %d)\n"
-
-#: sh/hivexsh.c:853 sh/hivexsh.c:958 sh/hivexsh.c:984 sh/hivexsh.c:1013
-#, c-format
-msgid "%s: %s: integer out of range\n"
-msgstr "%s: %s: el entero se encuentra fuera del rango\n"
-
-#: sh/hivexsh.c:875 sh/hivexsh.c:893
-#, c-format
-msgid "hivexsh: setval: unexpected end of input\n"
-msgstr "hivexsh: setval: final inesperado de la salida\n"
-
-#: sh/hivexsh.c:914 sh/hivexsh.c:933
-#, c-format
-msgid ""
-"hivexsh: string(utf16le): only 7 bit ASCII strings are supported for input\n"
-msgstr ""
-"hivexsh: string(utf16le): para la entrada, solo existe soporte para cadenas "
-"ASCII de 7 bit\n"
-
-#: sh/hivexsh.c:1044
-#, c-format
-msgid "hivexsh: setval: trailing garbage after hex string\n"
-msgstr "hivexsh: setval: rastreando basura luego de la cadena hex\n"
-
-#: sh/hivexsh.c:1051
-#, c-format
-msgid ""
-"hivexsh: setval: cannot parse value string, please refer to the man page "
-"hivexsh(1) for help: %s\n"
-msgstr ""
-"hivexsh: setval: no es posible analizar el valor de la cadena, por favor "
-"consulte la página man de hivexsh(1) para obtener ayuda: %s\n"
-
-#: sh/hivexsh.c:1080
-#, c-format
-msgid "hivexsh: del: the root node cannot be deleted\n"
-msgstr "hivexsh: del: el nodo raíz no puede ser eliminado\n"
-
-#: xml/hivexml.c:80
-#, c-format
-msgid "%s: failed to write XML document\n"
-msgstr "%s: falló al escribir documento XML\n"
-
-#: xml/hivexml.c:113
-#, c-format
-msgid "hivexml: missing name of input file\n"
-msgstr "hivexml: no se encuentra el nombre del archivo de entrada\n"
-
-#: xml/hivexml.c:132
-#, c-format
-msgid "xmlNewTextWriterFilename: failed to create XML writer\n"
-msgstr "xmlNewTextWriterFilename: falló al crear escritor XML\n"
diff --git a/trunk/hivex/po/fr.po b/trunk/hivex/po/fr.po
deleted file mode 100644
index c43f692..0000000
--- a/trunk/hivex/po/fr.po
+++ /dev/null
@@ -1,187 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hivex\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-10-11 12:43+0100\n"
-"PO-Revision-Date: 2011-03-27 20:53+0000\n"
-"Last-Translator: bozzo <b.barnier@gmail.com>\n"
-"Language-Team: French <trans-fr@lists.fedoraproject.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
-
-#: sh/hivexsh.c:156
-#, c-format
-msgid ""
-"\n"
-"Welcome to hivexsh, the hivex interactive shell for examining\n"
-"Windows Registry binary hive files.\n"
-"\n"
-"Type: 'help' for help summary\n"
-" 'quit' to quit the shell\n"
-"\n"
-msgstr ""
-"\n"
-"Bienvenue dans hivexsh, l'interpréteur de commandes interactif hivex pour "
-"examiner\n"
-"les fichiers « hive » du registre Windows.\n"
-"\n"
-"Tapez: « help » pour un résumé de l'aide\n"
-" « quit » pour quitter l'interpréteur de commandes\n"
-"\n"
-
-#: sh/hivexsh.c:270
-#, c-format
-msgid "hivexsh: error getting parent of node %zu\n"
-msgstr "hivexsh : erreur en récupérant le parent du nœud %zu\n"
-
-#: sh/hivexsh.c:280
-#, c-format
-msgid "hivexsh: error getting node name of node %zx\n"
-msgstr "hivexsh : erreur en récupérant le nom du nœud %zx\n"
-
-#: sh/hivexsh.c:419
-#, c-format
-msgid "hivexsh: you must load a hive file first using 'load hivefile'\n"
-msgstr ""
-"hivexsh : vous devez charger un fichier hive en utilisant « load hivefile »\n"
-
-#: sh/hivexsh.c:440
-#, c-format
-msgid "hivexsh: unknown command '%s', use 'help' for help summary\n"
-msgstr ""
-"hivexsh : commande « %s » inconnue, utilisez « help » pour obtenir un résumé "
-"de l'aide\n"
-
-#: sh/hivexsh.c:450
-#, c-format
-msgid "hivexsh: load: no hive file name given to load\n"
-msgstr ""
-"hivexsh : load : aucun nom de fichier hive donné à la fonction « load »\n"
-
-#: sh/hivexsh.c:466
-#, c-format
-msgid ""
-"hivexsh: failed to open hive file: %s: %m\n"
-"\n"
-"If you think this file is a valid Windows binary hive file (_not_\n"
-"a regedit *.reg file) then please run this command again using the\n"
-"hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-"which fails into a bug report at https://bugzilla.redhat.com/\n"
-"\n"
-msgstr ""
-"hivexsh : échec de l'ouverture du fichier hive : %s : %m\n"
-"\n"
-"Si vous pensez que ce fichier est un fichier binaire hive de Windows valide "
-"(_pas_\n"
-"un fichier regedit *.reg) alors veuillez lancer à nouveau cette commande, "
-"avec\n"
-"l'option hivexsh « -d », et joindre le résultat complet _avec_ le fichier "
-"hive\n"
-"qui échoue dans un rapport d'anomalie à l'adresse https://bugzilla.redhat."
-"com/\n"
-"\n"
-
-#: sh/hivexsh.c:499 sh/hivexsh.c:608 sh/hivexsh.c:1074
-#, c-format
-msgid "hivexsh: '%s' command should not be given arguments\n"
-msgstr "hivexsh : la commande « %s » ne doit pas avoir d'arguments\n"
-
-#: sh/hivexsh.c:541
-#, c-format
-msgid ""
-"%s: %s: \\ characters in path are doubled - are you escaping the path "
-"parameter correctly?\n"
-msgstr ""
-"%s : %s : les caractères « \\ » sont doublés dans le chemin, échappez-vous "
-"correctement le chemin en paramètre ?\n"
-
-#: sh/hivexsh.c:579
-#, c-format
-msgid "hivexsh: cd: subkey '%s' not found\n"
-msgstr "hivexsh : cd : la sous-clé « %s » est introuvable\n"
-
-#: sh/hivexsh.c:597
-#, c-format
-msgid ""
-"Navigate through the hive's keys using the 'cd' command, as if it\n"
-"contained a filesystem, and use 'ls' to list the subkeys of the\n"
-"current key. Full documentation is in the hivexsh(1) manual page.\n"
-msgstr ""
-"Naviguez dans les clés de hive à l'aide de la commande « cd », comme si il\n"
-"contenait un système de fichiers, et utilisez « ls » pour lister les sous-"
-"clés de la\n"
-"clé courrante. Toute la documentation est disponible dans la page de manuel "
-"de hivexsh(1).\n"
-
-#: sh/hivexsh.c:672
-#, c-format
-msgid "%s: %s: key not found\n"
-msgstr "%s : %s : clé introuvable\n"
-
-#: sh/hivexsh.c:848 sh/hivexsh.c:952 sh/hivexsh.c:978 sh/hivexsh.c:1007
-#, c-format
-msgid "%s: %s: invalid integer parameter (%s returned %d)\n"
-msgstr "%s : %s : paramètre entier invalide (%s a retourné %d)\n"
-
-#: sh/hivexsh.c:853 sh/hivexsh.c:958 sh/hivexsh.c:984 sh/hivexsh.c:1013
-#, c-format
-msgid "%s: %s: integer out of range\n"
-msgstr "%s : %s : entier hors limites\n"
-
-#: sh/hivexsh.c:875 sh/hivexsh.c:893
-#, c-format
-msgid "hivexsh: setval: unexpected end of input\n"
-msgstr "hivexsh : setval : fin inattendue de l'entrée\n"
-
-#: sh/hivexsh.c:914 sh/hivexsh.c:933
-#, c-format
-msgid ""
-"hivexsh: string(utf16le): only 7 bit ASCII strings are supported for input\n"
-msgstr ""
-"hivexsh : string(utf16le) : seules les chaines ASCII 7 bits sont supportées "
-"pour l'entrée\n"
-
-#: sh/hivexsh.c:1044
-#, c-format
-msgid "hivexsh: setval: trailing garbage after hex string\n"
-msgstr ""
-"hivexsh : setval : effacement du tampon après lecture de la chaîne "
-"hexadécimale\n"
-
-#: sh/hivexsh.c:1051
-#, c-format
-msgid ""
-"hivexsh: setval: cannot parse value string, please refer to the man page "
-"hivexsh(1) for help: %s\n"
-msgstr ""
-"hivexsh : setval : impossible d'analyser la valeur de la chaîne, veuillez "
-"vous référer à la page de manuel de hivexsh(1) pour obtenir de l'aide : %s\n"
-
-#: sh/hivexsh.c:1080
-#, c-format
-msgid "hivexsh: del: the root node cannot be deleted\n"
-msgstr "hivexsh : del : le nœud racine ne peut pas être supprimé\n"
-
-#: xml/hivexml.c:80
-#, c-format
-msgid "%s: failed to write XML document\n"
-msgstr "%s : échec de l'écriture du document XML\n"
-
-#: xml/hivexml.c:113
-#, c-format
-msgid "hivexml: missing name of input file\n"
-msgstr "hivexml : nom du fichier en entrée manquant\n"
-
-#: xml/hivexml.c:132
-#, c-format
-msgid "xmlNewTextWriterFilename: failed to create XML writer\n"
-msgstr ""
-"xmlNewTextWriterFilename : échec de la création du tampon d'écriture XML\n"
diff --git a/trunk/hivex/po/gu.po b/trunk/hivex/po/gu.po
deleted file mode 100644
index 826a676..0000000
--- a/trunk/hivex/po/gu.po
+++ /dev/null
@@ -1,165 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hivex\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-10-11 12:43+0100\n"
-"PO-Revision-Date: 2011-03-22 15:29+0000\n"
-"Last-Translator: sweta <swkothar@redhat.com>\n"
-"Language-Team: Gujarati <trans-gu@lists.fedoraproject.org>\n"
-"Language: gu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
-
-#: sh/hivexsh.c:156
-#, c-format
-msgid ""
-"\n"
-"Welcome to hivexsh, the hivex interactive shell for examining\n"
-"Windows Registry binary hive files.\n"
-"\n"
-"Type: 'help' for help summary\n"
-" 'quit' to quit the shell\n"
-"\n"
-msgstr ""
-"\n"
-"hivexsh માં તમારુ સ્વાગત છે, Windows રજીસ્ટરી બાઇનરી hive ફાઇલોનું નિરીક્ષણ કરવા માટે "
-"hivex ઇન્ટરૅક્ટિવ શેલ.\n"
-"\n"
-"લખો: મદદ સાર માટે 'help'\n"
-" શેલમાંથી બહાર નીકળવા માટે 'quit'\n"
-"\n"
-
-#: sh/hivexsh.c:270
-#, c-format
-msgid "hivexsh: error getting parent of node %zu\n"
-msgstr "hivexsh: મુખ્ય નોડ %zu ને મેળવી રહ્યા હોય ત્યારે ભૂલ\n"
-
-#: sh/hivexsh.c:280
-#, c-format
-msgid "hivexsh: error getting node name of node %zx\n"
-msgstr "hivexsh: નોડ %zx નાં નોડ નામને મેળવી રહ્યા હોય ત્યારે ભૂલ\n"
-
-#: sh/hivexsh.c:419
-#, c-format
-msgid "hivexsh: you must load a hive file first using 'load hivefile'\n"
-msgstr "hivexsh: તમારે 'load hivefile' ની મદદથી પહેલાં hive ફાઇલને લાવવુ જોઇએ\n"
-
-#: sh/hivexsh.c:440
-#, c-format
-msgid "hivexsh: unknown command '%s', use 'help' for help summary\n"
-msgstr "hivexsh: અજ્ઞાત આદેશ '%s', મદદ સારાંશ માટે 'help' વાપરો\n"
-
-#: sh/hivexsh.c:450
-#, c-format
-msgid "hivexsh: load: no hive file name given to load\n"
-msgstr "hivexsh: લોડ: લોડ કરવા માટે hive ફાઇલ નામ આપેલ નથી\n"
-
-#: sh/hivexsh.c:466
-#, c-format
-msgid ""
-"hivexsh: failed to open hive file: %s: %m\n"
-"\n"
-"If you think this file is a valid Windows binary hive file (_not_\n"
-"a regedit *.reg file) then please run this command again using the\n"
-"hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-"which fails into a bug report at https://bugzilla.redhat.com/\n"
-"\n"
-msgstr ""
-"hivexsh: hive ફાઇલને ખોલતી વખતે નિષ્ફળતા: %s: %m\n"
-"\n"
-"જો તમે એવુ વિચારો કે આ ફાઇલ યોગ્ય Windows બાઇનરી hive ફાઇલ છે (_not_\n"
-"a regedit *.reg ફાઇલ) પછી મહેરબાની કરીને hivexsh વિકલ્પ '-d' મદદથી ફરીથી આ આદેશને "
-"ચલાવો અને સંપૂર્ણ આઉટપુટ અને hive ફાઇલને જોડો\n"
-"કે જે https://bugzilla.redhat.com પર ભૂલને અહેવાલ કરવામાં નિષ્ફળ જાય છે/\n"
-"\n"
-
-#: sh/hivexsh.c:499 sh/hivexsh.c:608 sh/hivexsh.c:1074
-#, c-format
-msgid "hivexsh: '%s' command should not be given arguments\n"
-msgstr "hivexsh: '%s' આદેશે દલીલોને આપવી જોઇએ નહિં\n"
-
-#: sh/hivexsh.c:541
-#, c-format
-msgid ""
-"%s: %s: \\ characters in path are doubled - are you escaping the path "
-"parameter correctly?\n"
-msgstr ""
-"%s: %s: \\ પાથમાં અક્ષરો બેગણાં છે - શું તમે યોગ્ય પાથ પરિમાણ માંથી છૂટા થવા માંગો છો?\n"
-
-#: sh/hivexsh.c:579
-#, c-format
-msgid "hivexsh: cd: subkey '%s' not found\n"
-msgstr "hivexsh: cd: સબકી '%s' મળી નથી\n"
-
-#: sh/hivexsh.c:597
-#, c-format
-msgid ""
-"Navigate through the hive's keys using the 'cd' command, as if it\n"
-"contained a filesystem, and use 'ls' to list the subkeys of the\n"
-"current key. Full documentation is in the hivexsh(1) manual page.\n"
-msgstr ""
-
-#: sh/hivexsh.c:672
-#, c-format
-msgid "%s: %s: key not found\n"
-msgstr "%s: %s: કી મળી નથી\n"
-
-#: sh/hivexsh.c:848 sh/hivexsh.c:952 sh/hivexsh.c:978 sh/hivexsh.c:1007
-#, c-format
-msgid "%s: %s: invalid integer parameter (%s returned %d)\n"
-msgstr "%s: %s: અયોગ્ય ઇંટિજર પરિમાણ (%s એ %d ને પાછુ લાવેલ છે)\n"
-
-#: sh/hivexsh.c:853 sh/hivexsh.c:958 sh/hivexsh.c:984 sh/hivexsh.c:1013
-#, c-format
-msgid "%s: %s: integer out of range\n"
-msgstr "%s: %s: સીમાની બહાર ઇંટિજર\n"
-
-#: sh/hivexsh.c:875 sh/hivexsh.c:893
-#, c-format
-msgid "hivexsh: setval: unexpected end of input\n"
-msgstr "hivexsh: setval: ઇનપુટનો અનિચ્છનીય અંત\n"
-
-#: sh/hivexsh.c:914 sh/hivexsh.c:933
-#, c-format
-msgid ""
-"hivexsh: string(utf16le): only 7 bit ASCII strings are supported for input\n"
-msgstr "hivexsh: string(utf16le): ફક્ત 7 bit ASCII શબ્દમાળા ઇનપુટ માટે આધારભૂત છે\n"
-
-#: sh/hivexsh.c:1044
-#, c-format
-msgid "hivexsh: setval: trailing garbage after hex string\n"
-msgstr ""
-
-#: sh/hivexsh.c:1051
-#, c-format
-msgid ""
-"hivexsh: setval: cannot parse value string, please refer to the man page "
-"hivexsh(1) for help: %s\n"
-msgstr ""
-
-#: sh/hivexsh.c:1080
-#, c-format
-msgid "hivexsh: del: the root node cannot be deleted\n"
-msgstr "hivexsh: del: રુટ નોડને કાઢી શકાતુ નથી\n"
-
-#: xml/hivexml.c:80
-#, c-format
-msgid "%s: failed to write XML document\n"
-msgstr "%s: XML દસ્તાવેજને લખતી વખતે નિષ્ફળતા\n"
-
-#: xml/hivexml.c:113
-#, c-format
-msgid "hivexml: missing name of input file\n"
-msgstr "hivexml: ઇનપુટ ફાઇલનું ગુમ થયેલ નામ\n"
-
-#: xml/hivexml.c:132
-#, c-format
-msgid "xmlNewTextWriterFilename: failed to create XML writer\n"
-msgstr "xmlNewTextWriterFilename: XML લેખકને બનાવવાનું નિષ્ફળ\n"
diff --git a/trunk/hivex/po/hi.po b/trunk/hivex/po/hi.po
deleted file mode 100644
index e9b438f..0000000
--- a/trunk/hivex/po/hi.po
+++ /dev/null
@@ -1,175 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hivex\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-10-11 12:43+0100\n"
-"PO-Revision-Date: 2011-03-22 15:29+0000\n"
-"Last-Translator: rjones <rjones@redhat.com>\n"
-"Language-Team: Hindi <indlinux-hindi@lists.sourceforge.net>\n"
-"Language: hi\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
-
-#: sh/hivexsh.c:156
-#, c-format
-msgid ""
-"\n"
-"Welcome to hivexsh, the hivex interactive shell for examining\n"
-"Windows Registry binary hive files.\n"
-"\n"
-"Type: 'help' for help summary\n"
-" 'quit' to quit the shell\n"
-"\n"
-msgstr ""
-"\n"
-"Welcome to hivexsh, the hivex interactive shell for examining\n"
-"Windows Registry binary hive files.\n"
-"\n"
-"Type: 'help' for help summary\n"
-" 'quit' to quit the shell\n"
-"\n"
-
-#: sh/hivexsh.c:270
-#, c-format
-msgid "hivexsh: error getting parent of node %zu\n"
-msgstr "hivexsh: नोड %zu के जनक को पाने में त्रुटि\n"
-
-#: sh/hivexsh.c:280
-#, c-format
-msgid "hivexsh: error getting node name of node %zx\n"
-msgstr "hivexsh: नोड %zx के नोड नाम को पाने में त्रुटि\n"
-
-#: sh/hivexsh.c:419
-#, c-format
-msgid "hivexsh: you must load a hive file first using 'load hivefile'\n"
-msgstr ""
-"hivexsh: आपको जरूर एक पहले हाइव फाइल को 'load hivefile' के प्रयोग के पहले लोड करना "
-"चाहिए\n"
-
-#: sh/hivexsh.c:440
-#, c-format
-msgid "hivexsh: unknown command '%s', use 'help' for help summary\n"
-msgstr "hivexsh: अज्ञात कमांड '%s', 'help' को मदद सारांश के लिए उपयोग करें\n"
-
-#: sh/hivexsh.c:450
-#, c-format
-msgid "hivexsh: load: no hive file name given to load\n"
-msgstr "hivexsh: load: किसी हाइव फाइल नाम लोड करने के लिए है\n"
-
-#: sh/hivexsh.c:466
-#, c-format
-msgid ""
-"hivexsh: failed to open hive file: %s: %m\n"
-"\n"
-"If you think this file is a valid Windows binary hive file (_not_\n"
-"a regedit *.reg file) then please run this command again using the\n"
-"hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-"which fails into a bug report at https://bugzilla.redhat.com/\n"
-"\n"
-msgstr ""
-"hivexsh: failed to open hive file: %s: %m\n"
-"\n"
-"If you think this file is a valid Windows binary hive file (_not_\n"
-"a regedit *.reg file) then please run this command again using the\n"
-"hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-"which fails into a bug report at https://bugzilla.redhat.com/\n"
-"\n"
-
-#: sh/hivexsh.c:499 sh/hivexsh.c:608 sh/hivexsh.c:1074
-#, c-format
-msgid "hivexsh: '%s' command should not be given arguments\n"
-msgstr "hivexsh: '%s' कमांड को दिए तर्क में नहीं देना चाहिए\n"
-
-#: sh/hivexsh.c:541
-#, c-format
-msgid ""
-"%s: %s: \\ characters in path are doubled - are you escaping the path "
-"parameter correctly?\n"
-msgstr ""
-"%s: %s: \\ characters in path are doubled - are you escaping the path "
-"parameter correctly?\n"
-
-#: sh/hivexsh.c:579
-#, c-format
-msgid "hivexsh: cd: subkey '%s' not found\n"
-msgstr "hivexsh: cd: subkey '%s' not found\n"
-
-#: sh/hivexsh.c:597
-#, c-format
-msgid ""
-"Navigate through the hive's keys using the 'cd' command, as if it\n"
-"contained a filesystem, and use 'ls' to list the subkeys of the\n"
-"current key. Full documentation is in the hivexsh(1) manual page.\n"
-msgstr ""
-"हाइव कुंजी से होकर संचरित करें 'cd' कमांड के उपयोग से, जैसे कि\n"
-"यह एक फाइलसिस्टम समाहित करता है, और 'ls' का उपयोग मौजूदा कुंजी के\n"
-"उपकुंजी की सूती के लिए करें. hivexsh(1) मैनुअल पेज में पूर्ण दस्तावेजीकरण है.\n"
-
-#: sh/hivexsh.c:672
-#, c-format
-msgid "%s: %s: key not found\n"
-msgstr "%s: %s: कुंजी नहीं मिला\n"
-
-#: sh/hivexsh.c:848 sh/hivexsh.c:952 sh/hivexsh.c:978 sh/hivexsh.c:1007
-#, c-format
-msgid "%s: %s: invalid integer parameter (%s returned %d)\n"
-msgstr "%s: %s: अवैध पूर्णांक पैरामीटर (%s ने %d लौटाया)\n"
-
-#: sh/hivexsh.c:853 sh/hivexsh.c:958 sh/hivexsh.c:984 sh/hivexsh.c:1013
-#, c-format
-msgid "%s: %s: integer out of range\n"
-msgstr "%s: %s: परिसर के बाहर पूर्णांक\n"
-
-#: sh/hivexsh.c:875 sh/hivexsh.c:893
-#, c-format
-msgid "hivexsh: setval: unexpected end of input\n"
-msgstr "hivexsh: setval: इनपुट का अप्रत्याशित अंत\n"
-
-#: sh/hivexsh.c:914 sh/hivexsh.c:933
-#, c-format
-msgid ""
-"hivexsh: string(utf16le): only 7 bit ASCII strings are supported for input\n"
-msgstr ""
-"hivexsh: string(utf16le): केवल 7 bit ASCII स्ट्रिंग को इनपुट के लिए समर्थन दिया गया "
-"है\n"
-
-#: sh/hivexsh.c:1044
-#, c-format
-msgid "hivexsh: setval: trailing garbage after hex string\n"
-msgstr "hivexsh: setval: हेक्स स्ट्रिंग के बाद पीछा करता कचड़ा\n"
-
-#: sh/hivexsh.c:1051
-#, c-format
-msgid ""
-"hivexsh: setval: cannot parse value string, please refer to the man page "
-"hivexsh(1) for help: %s\n"
-msgstr ""
-"hivexsh: setval: मान स्ट्रिंग को विश्लेषित नहीं कर सका, कृपयाhivexsh(1) का मदद के "
-"लिए संदर्भ लें: %s\n"
-
-#: sh/hivexsh.c:1080
-#, c-format
-msgid "hivexsh: del: the root node cannot be deleted\n"
-msgstr "hivexsh: del: रूट नोड को मिटाया नहीं जा सकता है\n"
-
-#: xml/hivexml.c:80
-#, c-format
-msgid "%s: failed to write XML document\n"
-msgstr "%s: XML दस्तावेजीकरण लिखने में विफल\n"
-
-#: xml/hivexml.c:113
-#, c-format
-msgid "hivexml: missing name of input file\n"
-msgstr "hivexml: इनपुट फाइल का अनुपस्थित नाम\n"
-
-#: xml/hivexml.c:132
-#, c-format
-msgid "xmlNewTextWriterFilename: failed to create XML writer\n"
-msgstr "xmlNewTextWriterFilename: XML राइटर बनाने में विफल\n"
diff --git a/trunk/hivex/po/hivex.pot b/trunk/hivex/po/hivex.pot
deleted file mode 100644
index 9f68a0d..0000000
--- a/trunk/hivex/po/hivex.pot
+++ /dev/null
@@ -1,150 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: hivex 1.3.7\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-10-11 12:43+0100\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: sh/hivexsh.c:156
-#, c-format
-msgid ""
-"\n"
-"Welcome to hivexsh, the hivex interactive shell for examining\n"
-"Windows Registry binary hive files.\n"
-"\n"
-"Type: 'help' for help summary\n"
-" 'quit' to quit the shell\n"
-"\n"
-msgstr ""
-
-#: sh/hivexsh.c:270
-#, c-format
-msgid "hivexsh: error getting parent of node %zu\n"
-msgstr ""
-
-#: sh/hivexsh.c:280
-#, c-format
-msgid "hivexsh: error getting node name of node %zx\n"
-msgstr ""
-
-#: sh/hivexsh.c:419
-#, c-format
-msgid "hivexsh: you must load a hive file first using 'load hivefile'\n"
-msgstr ""
-
-#: sh/hivexsh.c:440
-#, c-format
-msgid "hivexsh: unknown command '%s', use 'help' for help summary\n"
-msgstr ""
-
-#: sh/hivexsh.c:450
-#, c-format
-msgid "hivexsh: load: no hive file name given to load\n"
-msgstr ""
-
-#: sh/hivexsh.c:466
-#, c-format
-msgid ""
-"hivexsh: failed to open hive file: %s: %m\n"
-"\n"
-"If you think this file is a valid Windows binary hive file (_not_\n"
-"a regedit *.reg file) then please run this command again using the\n"
-"hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-"which fails into a bug report at https://bugzilla.redhat.com/\n"
-"\n"
-msgstr ""
-
-#: sh/hivexsh.c:499 sh/hivexsh.c:608 sh/hivexsh.c:1074
-#, c-format
-msgid "hivexsh: '%s' command should not be given arguments\n"
-msgstr ""
-
-#: sh/hivexsh.c:541
-#, c-format
-msgid ""
-"%s: %s: \\ characters in path are doubled - are you escaping the path "
-"parameter correctly?\n"
-msgstr ""
-
-#: sh/hivexsh.c:579
-#, c-format
-msgid "hivexsh: cd: subkey '%s' not found\n"
-msgstr ""
-
-#: sh/hivexsh.c:597
-#, c-format
-msgid ""
-"Navigate through the hive's keys using the 'cd' command, as if it\n"
-"contained a filesystem, and use 'ls' to list the subkeys of the\n"
-"current key. Full documentation is in the hivexsh(1) manual page.\n"
-msgstr ""
-
-#: sh/hivexsh.c:672
-#, c-format
-msgid "%s: %s: key not found\n"
-msgstr ""
-
-#: sh/hivexsh.c:848 sh/hivexsh.c:952 sh/hivexsh.c:978 sh/hivexsh.c:1007
-#, c-format
-msgid "%s: %s: invalid integer parameter (%s returned %d)\n"
-msgstr ""
-
-#: sh/hivexsh.c:853 sh/hivexsh.c:958 sh/hivexsh.c:984 sh/hivexsh.c:1013
-#, c-format
-msgid "%s: %s: integer out of range\n"
-msgstr ""
-
-#: sh/hivexsh.c:875 sh/hivexsh.c:893
-#, c-format
-msgid "hivexsh: setval: unexpected end of input\n"
-msgstr ""
-
-#: sh/hivexsh.c:914 sh/hivexsh.c:933
-#, c-format
-msgid ""
-"hivexsh: string(utf16le): only 7 bit ASCII strings are supported for input\n"
-msgstr ""
-
-#: sh/hivexsh.c:1044
-#, c-format
-msgid "hivexsh: setval: trailing garbage after hex string\n"
-msgstr ""
-
-#: sh/hivexsh.c:1051
-#, c-format
-msgid ""
-"hivexsh: setval: cannot parse value string, please refer to the man page "
-"hivexsh(1) for help: %s\n"
-msgstr ""
-
-#: sh/hivexsh.c:1080
-#, c-format
-msgid "hivexsh: del: the root node cannot be deleted\n"
-msgstr ""
-
-#: xml/hivexml.c:80
-#, c-format
-msgid "%s: failed to write XML document\n"
-msgstr ""
-
-#: xml/hivexml.c:113
-#, c-format
-msgid "hivexml: missing name of input file\n"
-msgstr ""
-
-#: xml/hivexml.c:132
-#, c-format
-msgid "xmlNewTextWriterFilename: failed to create XML writer\n"
-msgstr ""
diff --git a/trunk/hivex/po/kn.po b/trunk/hivex/po/kn.po
deleted file mode 100644
index a4d81ff..0000000
--- a/trunk/hivex/po/kn.po
+++ /dev/null
@@ -1,177 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hivex\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-10-11 12:43+0100\n"
-"PO-Revision-Date: 2011-03-22 15:29+0000\n"
-"Last-Translator: rjones <rjones@redhat.com>\n"
-"Language-Team: Kannada <None>\n"
-"Language: kn\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0\n"
-
-#: sh/hivexsh.c:156
-#, c-format
-msgid ""
-"\n"
-"Welcome to hivexsh, the hivex interactive shell for examining\n"
-"Windows Registry binary hive files.\n"
-"\n"
-"Type: 'help' for help summary\n"
-" 'quit' to quit the shell\n"
-"\n"
-msgstr ""
-"\n"
-"hivexsh ಗೆ ಸ್ವಾಗತ, hivex ಎನ್ನುವುದು Windows ರಿಜಿಸ್ಟ್ರಿ ಬೈನರಿ ಕಡತಗಳನ್ನು "
-"ಪರಿಶೀಲಿಸುವ \n"
-"ಒಂದು ಸಂವಾದಾತ್ಮಕವಾದ ಶೆಲ್ ಆಗಿದೆ.\n"
-"\n"
-"ಹೀಗೆ ನಮೂದಿಸಿ: ನೆರವಿನ ಸಾರಾಂಶಕ್ಕಾಗಿ 'help' ಎಂದು \n"
-" ನಿರ್ಗಮಿಸಲು 'quit ಎಂದು'\n"
-"\n"
-
-#: sh/hivexsh.c:270
-#, c-format
-msgid "hivexsh: error getting parent of node %zu\n"
-msgstr "hivexsh: %zu ನ ಮೂಲ ನೋಡ್ ಅನ್ನು ಪಡೆದುಕೊಳ್ಳುವಲ್ಲಿ ದೋಷ\n"
-
-#: sh/hivexsh.c:280
-#, c-format
-msgid "hivexsh: error getting node name of node %zx\n"
-msgstr "hivexsh: %zu ನ ಮೂಲ ನೋಡ್ ಹೆಸರನ್ನು ಪಡೆದುಕೊಳ್ಳುವಲ್ಲಿ ದೋಷ\n"
-
-#: sh/hivexsh.c:419
-#, c-format
-msgid "hivexsh: you must load a hive file first using 'load hivefile'\n"
-msgstr ""
-"hivexsh: ನೀವು ಮೊದಲಿಗೆ 'load hivefile' ಅನ್ನು ಬಳಸಿಕೊಂಡು ಒಂದು ಹೈವ್ ಕಡತವನ್ನು ಲೋಡ್ "
-"ಮಾಡಬೇಕು\n"
-
-#: sh/hivexsh.c:440
-#, c-format
-msgid "hivexsh: unknown command '%s', use 'help' for help summary\n"
-msgstr "hivexsh: ಗೊತ್ತಿಲ್ಲದ ಆಜ್ಞೆ '%s', ನೆರವಿನ ಸಾರಾಂಶಕ್ಕಾಗಿ 'help' ಅನ್ನು ಬಳಸಿ\n"
-
-#: sh/hivexsh.c:450
-#, c-format
-msgid "hivexsh: load: no hive file name given to load\n"
-msgstr "hivexsh: load: ಲೋಡ್ ಮಾಡಲು ಯಾವುದೆ ಹೈವ್ ಕಡತದ ಹೆಸರನ್ನು ನೀಡಲಾಗಿಲ್ಲ\n"
-
-#: sh/hivexsh.c:466
-#, c-format
-msgid ""
-"hivexsh: failed to open hive file: %s: %m\n"
-"\n"
-"If you think this file is a valid Windows binary hive file (_not_\n"
-"a regedit *.reg file) then please run this command again using the\n"
-"hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-"which fails into a bug report at https://bugzilla.redhat.com/\n"
-"\n"
-msgstr ""
-"hivexsh: ಹೈವ್ ಕಡತವನ್ನು ತೆರೆಯಲಾಗಿಲ್ಲ: %s: %m\n"
-"\n"
-"ಇದು ಒಂದು Windows ಬೈನರಿ ಹೈವ್ ಕಡತವಾಗಿದೆ ಎಂದು ನೀವು ಭಾವಿಸಿದಲ್ಲಿ (ಒಂದು \n"
-"regedit *.reg _ಕಡತವಾಗಿಲ್ಲದೆ_ ಇದ್ದಲ್ಲಿ) hivexsh ಆಯ್ಕೆ '-d' ಅನ್ನು ಬಳಸಿಕೊಂಡು \n"
-"ಈ ಆಜ್ಞೆಯನ್ನು ಪುನಃ ಚಲಾಯಿಸಿ ಹಾಗು https://bugzilla.redhat.com/ ನಲ್ಲಿ ಒಂದು ದೋಷವನ್ನು\n"
-"ವರದಿ ಮಾಡಿ ಮತ್ತು ಸಂಪೂರ್ಣ ಔಟ್‌ಪುಟ್ ಅನ್ನು _ಹಾಗು_ ವಿಫಲಗೊಂಡಂತಹ ಹೈವ್ ಕಡತವನ್ನು ಅದಕ್ಕೆ "
-"ಲಗತ್ತಿಸಿ\n"
-"\n"
-
-#: sh/hivexsh.c:499 sh/hivexsh.c:608 sh/hivexsh.c:1074
-#, c-format
-msgid "hivexsh: '%s' command should not be given arguments\n"
-msgstr "hivexsh: '%s' ಎಂಬ ಆಜ್ಞೆಯೊಂದಿಗೆ ಆರ್ಗುಮೆಂಟ್‌ಗಳನ್ನು ಒದಗಿಸುವಂತಿಲ್ಲ\n"
-
-#: sh/hivexsh.c:541
-#, c-format
-msgid ""
-"%s: %s: \\ characters in path are doubled - are you escaping the path "
-"parameter correctly?\n"
-msgstr ""
-"%s: %s: \\ ಮಾರ್ಗದಲ್ಲಿರುವ ಅಕ್ಷರಗಳನ್ನು ಎರಡು ಬಾರಿ ನಮೂದಿಸಲಾಗಿದೆ - ನೀವು ಮಾರ್ಗದ "
-"ನಿಯತಾಂಕಗಳನ್ನು ಸರಿಯಾಗಿ ತಪ್ಪಿಸುತ್ತಿದ್ದೀರೆ?\n"
-
-#: sh/hivexsh.c:579
-#, c-format
-msgid "hivexsh: cd: subkey '%s' not found\n"
-msgstr "hivexsh: cd: ಉಪಕೀಲಿ '%s' ಕಂಡುಬಂದಿಲ್ಲ\n"
-
-#: sh/hivexsh.c:597
-#, c-format
-msgid ""
-"Navigate through the hive's keys using the 'cd' command, as if it\n"
-"contained a filesystem, and use 'ls' to list the subkeys of the\n"
-"current key. Full documentation is in the hivexsh(1) manual page.\n"
-msgstr ""
-"'cd' ಆಜ್ಞೆಯನ್ನು ಬಳಸಿಕೊಂಡು ಹೈವ್‌ನ ಕೀಲಿಗಳು ಒಂದು ಕಡತವ್ಯವಸ್ಥೆಯಲ್ಲಿರುವಂತೆ\n"
-"ವೀಕ್ಷಿಸಿ ಪ್ರಸಕ್ತ ಕೀಲಿಯ ಉಪಕೀಲಿಗಳ ಪಟ್ಟಿಯನ್ನು ನೋಡಲು 'ls' ಅನ್ನು ಬಳಸಿ.\n"
-"ಸಂಪೂರ್ಣ ದಸ್ತಾವೇಜು hivexsh(1) ಮಾರ್ಗದರ್ಶಿ ಪುಟದಲ್ಲಿದೆ.\n"
-
-#: sh/hivexsh.c:672
-#, c-format
-msgid "%s: %s: key not found\n"
-msgstr "%s: %s: ಕೀಲಿಯು ಕಂಡುಬಂದಿಲ್ಲ\n"
-
-#: sh/hivexsh.c:848 sh/hivexsh.c:952 sh/hivexsh.c:978 sh/hivexsh.c:1007
-#, c-format
-msgid "%s: %s: invalid integer parameter (%s returned %d)\n"
-msgstr "%s: %s: ಅಮಾನ್ಯವಾದ ಪೂರ್ಣ ನಿಯತಾಂಕ (%s ಮರಳಿಸಲಾಗಿದೆ %d)\n"
-
-#: sh/hivexsh.c:853 sh/hivexsh.c:958 sh/hivexsh.c:984 sh/hivexsh.c:1013
-#, c-format
-msgid "%s: %s: integer out of range\n"
-msgstr "%s: %s: ಪೂರ್ಣಾಂಕವು ವ್ಯಾಪ್ತಿಯ ಹೊರಗಿದೆ\n"
-
-#: sh/hivexsh.c:875 sh/hivexsh.c:893
-#, c-format
-msgid "hivexsh: setval: unexpected end of input\n"
-msgstr "hivexsh: setval: ಇನ್‌ಪುಟ್‌ಗೆ ಅನಿರೀಕ್ಷಿತವಾದ ಅಂತ್ಯ\n"
-
-#: sh/hivexsh.c:914 sh/hivexsh.c:933
-#, c-format
-msgid ""
-"hivexsh: string(utf16le): only 7 bit ASCII strings are supported for input\n"
-msgstr ""
-"hivexsh: string(utf16le): ಇನ್‌ಪುಟ್‌ನಲ್ಲಿ ಕೇವಲ 7 ಬಿಟ್‌ ASCII ವಾಕ್ಯಗಳನ್ನು ಮಾತ್ರ "
-"ಬೆಂಬಲಿಸಲಾಗುತ್ತದೆ\n"
-
-#: sh/hivexsh.c:1044
-#, c-format
-msgid "hivexsh: setval: trailing garbage after hex string\n"
-msgstr "hivexsh: setval: ಹೆಕ್ಸ್ ವಾಕ್ಯದ ನಂತರ ಹಿಂಬಾಲಿಸುವ ಗಾರ್ಬೇಜ್\n"
-
-#: sh/hivexsh.c:1051
-#, c-format
-msgid ""
-"hivexsh: setval: cannot parse value string, please refer to the man page "
-"hivexsh(1) for help: %s\n"
-msgstr ""
-"hivexsh: setval: ಮೌಲ್ಯದ ವಾಕ್ಯವನ್ನು ಪಾರ್ಸ್ ಮಾಡಲು ಸಾಧ್ಯವಾಗಿಲ್ಲ, ದಯವಿಟ್ಟು ನೆರವಿಗಾಗಿ "
-"hivexsh(1) ಅನ್ನು ನೋಡಿ: %s\n"
-
-#: sh/hivexsh.c:1080
-#, c-format
-msgid "hivexsh: del: the root node cannot be deleted\n"
-msgstr "hivexsh: del: ಮೂಲ ನೋಡ್ ಅನ್ನು ಅಳಿಸಲು ಸಾಧ್ಯವಿಲ್ಲ\n"
-
-#: xml/hivexml.c:80
-#, c-format
-msgid "%s: failed to write XML document\n"
-msgstr "%s: XML ದಸ್ತಾವೇಜನ್ನು ಬರೆಯುವಲ್ಲಿ ವಿಫಲಗೊಂಡಿದೆ\n"
-
-#: xml/hivexml.c:113
-#, c-format
-msgid "hivexml: missing name of input file\n"
-msgstr "hivexml: ಇನ್‌ಪುಟ್ ಕಡತದ ಹೆಸರು ಕಾಣಿಸುತ್ತಿಲ್ಲ\n"
-
-#: xml/hivexml.c:132
-#, c-format
-msgid "xmlNewTextWriterFilename: failed to create XML writer\n"
-msgstr "xmlNewTextWriterFilename: XML ಬರಹಗಾರನನ್ನು ರಚಿಸಲು ವಿಫಲಗೊಂಡಿದೆ\n"
diff --git a/trunk/hivex/po/ml.po b/trunk/hivex/po/ml.po
deleted file mode 100644
index 09a14f8..0000000
--- a/trunk/hivex/po/ml.po
+++ /dev/null
@@ -1,150 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hivex\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-10-11 12:43+0100\n"
-"PO-Revision-Date: 2011-03-22 15:29+0000\n"
-"Last-Translator: rjones <rjones@redhat.com>\n"
-"Language-Team: Malayalam <discuss@lists.smc.org.in>\n"
-"Language: ml\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
-
-#: sh/hivexsh.c:156
-#, c-format
-msgid ""
-"\n"
-"Welcome to hivexsh, the hivex interactive shell for examining\n"
-"Windows Registry binary hive files.\n"
-"\n"
-"Type: 'help' for help summary\n"
-" 'quit' to quit the shell\n"
-"\n"
-msgstr ""
-
-#: sh/hivexsh.c:270
-#, c-format
-msgid "hivexsh: error getting parent of node %zu\n"
-msgstr ""
-
-#: sh/hivexsh.c:280
-#, c-format
-msgid "hivexsh: error getting node name of node %zx\n"
-msgstr ""
-
-#: sh/hivexsh.c:419
-#, c-format
-msgid "hivexsh: you must load a hive file first using 'load hivefile'\n"
-msgstr ""
-
-#: sh/hivexsh.c:440
-#, c-format
-msgid "hivexsh: unknown command '%s', use 'help' for help summary\n"
-msgstr ""
-
-#: sh/hivexsh.c:450
-#, c-format
-msgid "hivexsh: load: no hive file name given to load\n"
-msgstr ""
-
-#: sh/hivexsh.c:466
-#, c-format
-msgid ""
-"hivexsh: failed to open hive file: %s: %m\n"
-"\n"
-"If you think this file is a valid Windows binary hive file (_not_\n"
-"a regedit *.reg file) then please run this command again using the\n"
-"hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-"which fails into a bug report at https://bugzilla.redhat.com/\n"
-"\n"
-msgstr ""
-
-#: sh/hivexsh.c:499 sh/hivexsh.c:608 sh/hivexsh.c:1074
-#, c-format
-msgid "hivexsh: '%s' command should not be given arguments\n"
-msgstr ""
-
-#: sh/hivexsh.c:541
-#, c-format
-msgid ""
-"%s: %s: \\ characters in path are doubled - are you escaping the path "
-"parameter correctly?\n"
-msgstr ""
-
-#: sh/hivexsh.c:579
-#, c-format
-msgid "hivexsh: cd: subkey '%s' not found\n"
-msgstr ""
-
-#: sh/hivexsh.c:597
-#, c-format
-msgid ""
-"Navigate through the hive's keys using the 'cd' command, as if it\n"
-"contained a filesystem, and use 'ls' to list the subkeys of the\n"
-"current key. Full documentation is in the hivexsh(1) manual page.\n"
-msgstr ""
-
-#: sh/hivexsh.c:672
-#, c-format
-msgid "%s: %s: key not found\n"
-msgstr ""
-
-#: sh/hivexsh.c:848 sh/hivexsh.c:952 sh/hivexsh.c:978 sh/hivexsh.c:1007
-#, c-format
-msgid "%s: %s: invalid integer parameter (%s returned %d)\n"
-msgstr "%s: %s: അസാധുവായ ഇന്റിജര്‍ പരാമീറ്റര്‍ (%s %d തിരികെ നല്‍കിയിരിക്കുന്നു)\n"
-
-#: sh/hivexsh.c:853 sh/hivexsh.c:958 sh/hivexsh.c:984 sh/hivexsh.c:1013
-#, c-format
-msgid "%s: %s: integer out of range\n"
-msgstr "%s: %s: ഇന്റിജര്‍ പരിധികഴിഞ്ഞിരിക്കുന്നു\n"
-
-#: sh/hivexsh.c:875 sh/hivexsh.c:893
-#, c-format
-msgid "hivexsh: setval: unexpected end of input\n"
-msgstr ""
-
-#: sh/hivexsh.c:914 sh/hivexsh.c:933
-#, c-format
-msgid ""
-"hivexsh: string(utf16le): only 7 bit ASCII strings are supported for input\n"
-msgstr ""
-
-#: sh/hivexsh.c:1044
-#, c-format
-msgid "hivexsh: setval: trailing garbage after hex string\n"
-msgstr ""
-
-#: sh/hivexsh.c:1051
-#, c-format
-msgid ""
-"hivexsh: setval: cannot parse value string, please refer to the man page "
-"hivexsh(1) for help: %s\n"
-msgstr ""
-
-#: sh/hivexsh.c:1080
-#, c-format
-msgid "hivexsh: del: the root node cannot be deleted\n"
-msgstr ""
-
-#: xml/hivexml.c:80
-#, c-format
-msgid "%s: failed to write XML document\n"
-msgstr ""
-
-#: xml/hivexml.c:113
-#, c-format
-msgid "hivexml: missing name of input file\n"
-msgstr ""
-
-#: xml/hivexml.c:132
-#, c-format
-msgid "xmlNewTextWriterFilename: failed to create XML writer\n"
-msgstr ""
diff --git a/trunk/hivex/po/mr.po b/trunk/hivex/po/mr.po
deleted file mode 100644
index a4d2ac0..0000000
--- a/trunk/hivex/po/mr.po
+++ /dev/null
@@ -1,174 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hivex\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-10-11 12:43+0100\n"
-"PO-Revision-Date: 2011-03-22 15:29+0000\n"
-"Last-Translator: sandeeps <sshedmak@redhat.com>\n"
-"Language-Team: Marathi <None>\n"
-"Language: mr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
-
-#: sh/hivexsh.c:156
-#, c-format
-msgid ""
-"\n"
-"Welcome to hivexsh, the hivex interactive shell for examining\n"
-"Windows Registry binary hive files.\n"
-"\n"
-"Type: 'help' for help summary\n"
-" 'quit' to quit the shell\n"
-"\n"
-msgstr ""
-"\n"
-"hivexsh येथे आपले स्वागत, hivex हे \n"
-"Windows Registry बाइनरी hive फाइल्सचे विश्लेषण करण्यासाठी परस्पर संवाद शेल आहे.\n"
-"\n"
-"टाइप: मदत सारांशकरीता 'help' टाइप करा \n"
-" शेल पासून बाहेर पडण्यासाठी 'quit'\n"
-"\n"
-
-#: sh/hivexsh.c:270
-#, c-format
-msgid "hivexsh: error getting parent of node %zu\n"
-msgstr "hivexsh: नोड %zu चे पॅरेंट प्राप्त करतेवेळी त्रुटी आढळली\n"
-
-#: sh/hivexsh.c:280
-#, c-format
-msgid "hivexsh: error getting node name of node %zx\n"
-msgstr "hivexsh: नोड %zx चे नोड नाव प्राप्त करतेवेळी त्रुटी आढळली\n"
-
-#: sh/hivexsh.c:419
-#, c-format
-msgid "hivexsh: you must load a hive file first using 'load hivefile'\n"
-msgstr ""
-"hivexsh: 'load hivefile' चा वापर करून तुम्ही hive फाइल प्रथम लोड करायला हवे\n"
-
-#: sh/hivexsh.c:440
-#, c-format
-msgid "hivexsh: unknown command '%s', use 'help' for help summary\n"
-msgstr "hivexsh: अपरिचीत आदेश '%s', मदत सारांशकरीता 'help' चा वापर करा\n"
-
-#: sh/hivexsh.c:450
-#, c-format
-msgid "hivexsh: load: no hive file name given to load\n"
-msgstr "hivexsh: load: लोडकरीता hive फाइल नाव दिले नाही\n"
-
-#: sh/hivexsh.c:466
-#, c-format
-msgid ""
-"hivexsh: failed to open hive file: %s: %m\n"
-"\n"
-"If you think this file is a valid Windows binary hive file (_not_\n"
-"a regedit *.reg file) then please run this command again using the\n"
-"hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-"which fails into a bug report at https://bugzilla.redhat.com/\n"
-"\n"
-msgstr ""
-"hivexsh: hive फाइल उघडण्यास अपयशी: %s: %m\n"
-"\n"
-"ही फाइल वैध Windows बाइनरी hive पाइल (_not_\n"
-"a regedit *.reg file) असल्यास कृपया \n"
-"hivexsh पर्याय '-d' चा वापर करून हे आदेश पुनः चालवा व संपूर्ण आऊटपुट _and_ अपयशी hive "
-"फाइल\n"
-" https://bugzilla.redhat.com/ येथील बग अहवालात जोडा\n"
-"\n"
-
-#: sh/hivexsh.c:499 sh/hivexsh.c:608 sh/hivexsh.c:1074
-#, c-format
-msgid "hivexsh: '%s' command should not be given arguments\n"
-msgstr "hivexsh: '%s' आदेश यांस घटके देऊ नका\n"
-
-#: sh/hivexsh.c:541
-#, c-format
-msgid ""
-"%s: %s: \\ characters in path are doubled - are you escaping the path "
-"parameter correctly?\n"
-msgstr ""
-"%s: %s: \\ मार्गातील अक्षरे दुप्पट केले आहेत - तुम्ही मार्ग संबंधीत घटक योग्यप्रकारे एस्केप "
-"करत आहात?\n"
-
-#: sh/hivexsh.c:579
-#, c-format
-msgid "hivexsh: cd: subkey '%s' not found\n"
-msgstr "hivexsh: cd: सबकि '%s' आढळली नाही\n"
-
-#: sh/hivexsh.c:597
-#, c-format
-msgid ""
-"Navigate through the hive's keys using the 'cd' command, as if it\n"
-"contained a filesystem, and use 'ls' to list the subkeys of the\n"
-"current key. Full documentation is in the hivexsh(1) manual page.\n"
-msgstr ""
-"'cd' आदेशचा वापर करून हाइव्हच्या किज अंतर्गत, फाइलप्रणाली प्रमाणेच, संचारन करा, \n"
-"व सध्याच्या कि मधील सबकिजच्या सूची करीता 'ls'\n"
-"याचा वापर करा. संपूर्ण दस्तऐवजीकरण hivexsh(1) मॅन्यूअल पृष्ठात आहे.\n"
-
-#: sh/hivexsh.c:672
-#, c-format
-msgid "%s: %s: key not found\n"
-msgstr "%s: %s: कि आढळली नाही\n"
-
-#: sh/hivexsh.c:848 sh/hivexsh.c:952 sh/hivexsh.c:978 sh/hivexsh.c:1007
-#, c-format
-msgid "%s: %s: invalid integer parameter (%s returned %d)\n"
-msgstr "%s: %s: अवैध इंटीजर घटक (%s ने %d पाठवले)\n"
-
-#: sh/hivexsh.c:853 sh/hivexsh.c:958 sh/hivexsh.c:984 sh/hivexsh.c:1013
-#, c-format
-msgid "%s: %s: integer out of range\n"
-msgstr "%s: %s: इंटीजर व्याप्तीच्या बाहेर आहे\n"
-
-#: sh/hivexsh.c:875 sh/hivexsh.c:893
-#, c-format
-msgid "hivexsh: setval: unexpected end of input\n"
-msgstr "hivexsh: setval: इंपुटची अनेपक्षीत समाप्ति\n"
-
-#: sh/hivexsh.c:914 sh/hivexsh.c:933
-#, c-format
-msgid ""
-"hivexsh: string(utf16le): only 7 bit ASCII strings are supported for input\n"
-msgstr ""
-"hivexsh: string(utf16le): फक्त 7 बिट ASCII अक्षरमाळा इंपुटकरीता समर्थीत आहे\n"
-
-#: sh/hivexsh.c:1044
-#, c-format
-msgid "hivexsh: setval: trailing garbage after hex string\n"
-msgstr "hivexsh: setval: hex स्ट्रिंग नंतर ट्रेलिंग गार्बेज\n"
-
-#: sh/hivexsh.c:1051
-#, c-format
-msgid ""
-"hivexsh: setval: cannot parse value string, please refer to the man page "
-"hivexsh(1) for help: %s\n"
-msgstr ""
-"hivexsh: setval: वॅल्यू स्ट्रिंग वाचणे अशक्य, कृपया मदतीसाठी man page hivexsh(1) पहा: "
-"%s\n"
-
-#: sh/hivexsh.c:1080
-#, c-format
-msgid "hivexsh: del: the root node cannot be deleted\n"
-msgstr "hivexsh: del: रूट नोड नष्ट करणे शक्य आहे\n"
-
-#: xml/hivexml.c:80
-#, c-format
-msgid "%s: failed to write XML document\n"
-msgstr "%s: XML दस्तऐवज लिहण्यास अपयशी\n"
-
-#: xml/hivexml.c:113
-#, c-format
-msgid "hivexml: missing name of input file\n"
-msgstr "hivexml: इंपुट फाइलचे नाव आढळले नाही\n"
-
-#: xml/hivexml.c:132
-#, c-format
-msgid "xmlNewTextWriterFilename: failed to create XML writer\n"
-msgstr "xmlNewTextWriterFilename: XML राईटर निर्माण करण्यास अपयशी\n"
diff --git a/trunk/hivex/po/nl.po b/trunk/hivex/po/nl.po
deleted file mode 100644
index 794e188..0000000
--- a/trunk/hivex/po/nl.po
+++ /dev/null
@@ -1,175 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hivex\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-10-11 12:43+0100\n"
-"PO-Revision-Date: 2011-03-22 15:29+0000\n"
-"Last-Translator: rjones <rjones@redhat.com>\n"
-"Language-Team: Dutch <>\n"
-"Language: nl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
-
-#: sh/hivexsh.c:156
-#, c-format
-msgid ""
-"\n"
-"Welcome to hivexsh, the hivex interactive shell for examining\n"
-"Windows Registry binary hive files.\n"
-"\n"
-"Type: 'help' for help summary\n"
-" 'quit' to quit the shell\n"
-"\n"
-msgstr ""
-"\n"
-"Welkom bij hivexsh, de hivex interactieve shell voor het bekijken van\n"
-"Windows Registry binaire hive bestanden.\n"
-"\n"
-"Type: 'help' voor een hulp samenvatting\n"
-" 'quit' om de shell te verlaten\n"
-"\n"
-
-#: sh/hivexsh.c:270
-#, c-format
-msgid "hivexsh: error getting parent of node %zu\n"
-msgstr "hivexsh: fout bij het verkrijgen van ouder van node %zu\n"
-
-#: sh/hivexsh.c:280
-#, c-format
-msgid "hivexsh: error getting node name of node %zx\n"
-msgstr "hivexsh: fout bij het verkrijgen van naam van node %zu\n"
-
-#: sh/hivexsh.c:419
-#, c-format
-msgid "hivexsh: you must load a hive file first using 'load hivefile'\n"
-msgstr "hivexsh: je moet eerst een hive bestand laden met 'load hivefile'\n"
-
-#: sh/hivexsh.c:440
-#, c-format
-msgid "hivexsh: unknown command '%s', use 'help' for help summary\n"
-msgstr ""
-"hivexsh: onbekend commando '%s', gebruik 'help' voor een hulp samenvatting\n"
-
-#: sh/hivexsh.c:450
-#, c-format
-msgid "hivexsh: load: no hive file name given to load\n"
-msgstr "hivexsh: load: er werd geen bestandsnaam opgegeven om te laden\n"
-
-#: sh/hivexsh.c:466
-#, c-format
-msgid ""
-"hivexsh: failed to open hive file: %s: %m\n"
-"\n"
-"If you think this file is a valid Windows binary hive file (_not_\n"
-"a regedit *.reg file) then please run this command again using the\n"
-"hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-"which fails into a bug report at https://bugzilla.redhat.com/\n"
-"\n"
-msgstr ""
-"hivexsh: openen van hive bestand %s mislukte: %m\n"
-"\n"
-"Als je denkt dat dit een geldig Windows binair hive bestand is (_niet_\n"
-"een regedit *.reg bestand) draai dan dit commando opnieuw met de\n"
-"hivexsh optie '-d' en voeg de complete output _en_ het hive bestand\n"
-"dat faalt toe aan een bug rapport op https://bugzilla.redhat.com/\n"
-"\n"
-
-#: sh/hivexsh.c:499 sh/hivexsh.c:608 sh/hivexsh.c:1074
-#, c-format
-msgid "hivexsh: '%s' command should not be given arguments\n"
-msgstr "hivexsh: '%s' commando moet geen argumenten krijgen\n"
-
-#: sh/hivexsh.c:541
-#, c-format
-msgid ""
-"%s: %s: \\ characters in path are doubled - are you escaping the path "
-"parameter correctly?\n"
-msgstr ""
-"%s: %s: \\ karakters in pad zijn verdubbeld - weet je zeker dat de pad "
-"parameter correct met escape voorzien is?\n"
-
-#: sh/hivexsh.c:579
-#, c-format
-msgid "hivexsh: cd: subkey '%s' not found\n"
-msgstr "hivexsh: cd: sub-sleutel '%s' niet gevonden\n"
-
-#: sh/hivexsh.c:597
-#, c-format
-msgid ""
-"Navigate through the hive's keys using the 'cd' command, as if it\n"
-"contained a filesystem, and use 'ls' to list the subkeys of the\n"
-"current key. Full documentation is in the hivexsh(1) manual page.\n"
-msgstr ""
-"Navigeer door de sleutels van hive met het 'cd' commando, alsof het\n"
-"een bestandssysteem bevat, en gebruik 'ls' om de sub-sleutels van de "
-"huidige\n"
-"sleutel te tonen. Volledige documentatie is in de hivexsh(1) manual pagina.\n"
-
-#: sh/hivexsh.c:672
-#, c-format
-msgid "%s: %s: key not found\n"
-msgstr "%s: %s: sleitel niet gevonden\n"
-
-#: sh/hivexsh.c:848 sh/hivexsh.c:952 sh/hivexsh.c:978 sh/hivexsh.c:1007
-#, c-format
-msgid "%s: %s: invalid integer parameter (%s returned %d)\n"
-msgstr "%s: %s: ongeldige integer parameter (%s gaf %d terug)\n"
-
-#: sh/hivexsh.c:853 sh/hivexsh.c:958 sh/hivexsh.c:984 sh/hivexsh.c:1013
-#, c-format
-msgid "%s: %s: integer out of range\n"
-msgstr "%s: %s: integer ligt buiten de reeks\n"
-
-#: sh/hivexsh.c:875 sh/hivexsh.c:893
-#, c-format
-msgid "hivexsh: setval: unexpected end of input\n"
-msgstr "hivexsh: setval: onverwacht einde van input\n"
-
-#: sh/hivexsh.c:914 sh/hivexsh.c:933
-#, c-format
-msgid ""
-"hivexsh: string(utf16le): only 7 bit ASCII strings are supported for input\n"
-msgstr ""
-"hivexsh: string(utf16le): als input worden slechts 7 bits ASCII tekenreeksen "
-"ondersteund\n"
-
-#: sh/hivexsh.c:1044
-#, c-format
-msgid "hivexsh: setval: trailing garbage after hex string\n"
-msgstr "hivexsh: setval: onnodige input na de hex tekenreeks\n"
-
-#: sh/hivexsh.c:1051
-#, c-format
-msgid ""
-"hivexsh: setval: cannot parse value string, please refer to the man page "
-"hivexsh(1) for help: %s\n"
-msgstr ""
-"hivexsh: setval: kan waarde van tekenreeks niet ontleden, refereer naar de "
-"manual pagina hivexsh(1) voor hulp: %s\n"
-
-#: sh/hivexsh.c:1080
-#, c-format
-msgid "hivexsh: del: the root node cannot be deleted\n"
-msgstr "hivexsh: del: de root node kan niet verwijderd worden\n"
-
-#: xml/hivexml.c:80
-#, c-format
-msgid "%s: failed to write XML document\n"
-msgstr "%s: het schrijven van XML document mislukte\n"
-
-#: xml/hivexml.c:113
-#, c-format
-msgid "hivexml: missing name of input file\n"
-msgstr "hivexml: naam van input bestand ontbreekt\n"
-
-#: xml/hivexml.c:132
-#, c-format
-msgid "xmlNewTextWriterFilename: failed to create XML writer\n"
-msgstr "xmlNewTextWriterFilename: aanmaken van XML schrijver mislukte\n"
diff --git a/trunk/hivex/po/or.po b/trunk/hivex/po/or.po
deleted file mode 100644
index 7c5f8ef..0000000
--- a/trunk/hivex/po/or.po
+++ /dev/null
@@ -1,150 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hivex\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-10-11 12:43+0100\n"
-"PO-Revision-Date: 2011-03-22 15:29+0000\n"
-"Last-Translator: rjones <rjones@redhat.com>\n"
-"Language-Team: Oriya <None>\n"
-"Language: or\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1)\n"
-
-#: sh/hivexsh.c:156
-#, c-format
-msgid ""
-"\n"
-"Welcome to hivexsh, the hivex interactive shell for examining\n"
-"Windows Registry binary hive files.\n"
-"\n"
-"Type: 'help' for help summary\n"
-" 'quit' to quit the shell\n"
-"\n"
-msgstr ""
-
-#: sh/hivexsh.c:270
-#, c-format
-msgid "hivexsh: error getting parent of node %zu\n"
-msgstr ""
-
-#: sh/hivexsh.c:280
-#, c-format
-msgid "hivexsh: error getting node name of node %zx\n"
-msgstr ""
-
-#: sh/hivexsh.c:419
-#, c-format
-msgid "hivexsh: you must load a hive file first using 'load hivefile'\n"
-msgstr ""
-
-#: sh/hivexsh.c:440
-#, c-format
-msgid "hivexsh: unknown command '%s', use 'help' for help summary\n"
-msgstr ""
-
-#: sh/hivexsh.c:450
-#, c-format
-msgid "hivexsh: load: no hive file name given to load\n"
-msgstr ""
-
-#: sh/hivexsh.c:466
-#, c-format
-msgid ""
-"hivexsh: failed to open hive file: %s: %m\n"
-"\n"
-"If you think this file is a valid Windows binary hive file (_not_\n"
-"a regedit *.reg file) then please run this command again using the\n"
-"hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-"which fails into a bug report at https://bugzilla.redhat.com/\n"
-"\n"
-msgstr ""
-
-#: sh/hivexsh.c:499 sh/hivexsh.c:608 sh/hivexsh.c:1074
-#, c-format
-msgid "hivexsh: '%s' command should not be given arguments\n"
-msgstr ""
-
-#: sh/hivexsh.c:541
-#, c-format
-msgid ""
-"%s: %s: \\ characters in path are doubled - are you escaping the path "
-"parameter correctly?\n"
-msgstr ""
-
-#: sh/hivexsh.c:579
-#, c-format
-msgid "hivexsh: cd: subkey '%s' not found\n"
-msgstr ""
-
-#: sh/hivexsh.c:597
-#, c-format
-msgid ""
-"Navigate through the hive's keys using the 'cd' command, as if it\n"
-"contained a filesystem, and use 'ls' to list the subkeys of the\n"
-"current key. Full documentation is in the hivexsh(1) manual page.\n"
-msgstr ""
-
-#: sh/hivexsh.c:672
-#, c-format
-msgid "%s: %s: key not found\n"
-msgstr ""
-
-#: sh/hivexsh.c:848 sh/hivexsh.c:952 sh/hivexsh.c:978 sh/hivexsh.c:1007
-#, c-format
-msgid "%s: %s: invalid integer parameter (%s returned %d)\n"
-msgstr "%s: %s: ଅବୈଧ ଗଣନ ସଂଖ୍ୟା ପ୍ରାଚଳ (%s ଫେରାଇଥାଏ %d)\n"
-
-#: sh/hivexsh.c:853 sh/hivexsh.c:958 sh/hivexsh.c:984 sh/hivexsh.c:1013
-#, c-format
-msgid "%s: %s: integer out of range\n"
-msgstr "%s: %s: ଗଣନସଂଖ୍ୟାଟି ପରିସର ବାହାରେ\n"
-
-#: sh/hivexsh.c:875 sh/hivexsh.c:893
-#, c-format
-msgid "hivexsh: setval: unexpected end of input\n"
-msgstr ""
-
-#: sh/hivexsh.c:914 sh/hivexsh.c:933
-#, c-format
-msgid ""
-"hivexsh: string(utf16le): only 7 bit ASCII strings are supported for input\n"
-msgstr ""
-
-#: sh/hivexsh.c:1044
-#, c-format
-msgid "hivexsh: setval: trailing garbage after hex string\n"
-msgstr ""
-
-#: sh/hivexsh.c:1051
-#, c-format
-msgid ""
-"hivexsh: setval: cannot parse value string, please refer to the man page "
-"hivexsh(1) for help: %s\n"
-msgstr ""
-
-#: sh/hivexsh.c:1080
-#, c-format
-msgid "hivexsh: del: the root node cannot be deleted\n"
-msgstr ""
-
-#: xml/hivexml.c:80
-#, c-format
-msgid "%s: failed to write XML document\n"
-msgstr ""
-
-#: xml/hivexml.c:113
-#, c-format
-msgid "hivexml: missing name of input file\n"
-msgstr ""
-
-#: xml/hivexml.c:132
-#, c-format
-msgid "xmlNewTextWriterFilename: failed to create XML writer\n"
-msgstr ""
diff --git a/trunk/hivex/po/pl.po b/trunk/hivex/po/pl.po
deleted file mode 100644
index b2bf5a1..0000000
--- a/trunk/hivex/po/pl.po
+++ /dev/null
@@ -1,177 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hivex\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-10-11 12:43+0100\n"
-"PO-Revision-Date: 2011-03-22 15:29+0000\n"
-"Last-Translator: rjones <rjones@redhat.com>\n"
-"Language-Team: Polish <None>\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2)\n"
-
-#: sh/hivexsh.c:156
-#, c-format
-msgid ""
-"\n"
-"Welcome to hivexsh, the hivex interactive shell for examining\n"
-"Windows Registry binary hive files.\n"
-"\n"
-"Type: 'help' for help summary\n"
-" 'quit' to quit the shell\n"
-"\n"
-msgstr ""
-"\n"
-"Witaj w hivexsh, interaktywnej powłoce hivex do sprawdzania\n"
-"binarnych plików typu \"hive\" Rejestru systemu Windows.\n"
-"\n"
-"Proszę podać: \"help\", aby uzyskać podsumowanie pomocy\n"
-" \"quit\", aby zakończyć powłokę\n"
-"\n"
-
-#: sh/hivexsh.c:270
-#, c-format
-msgid "hivexsh: error getting parent of node %zu\n"
-msgstr "hivexsh: błąd podczas uzyskiwania nadrzędnego węzła %zu\n"
-
-#: sh/hivexsh.c:280
-#, c-format
-msgid "hivexsh: error getting node name of node %zx\n"
-msgstr "hivexsh: błąd podczas uzyskiwania nazwy węzła %zx\n"
-
-#: sh/hivexsh.c:419
-#, c-format
-msgid "hivexsh: you must load a hive file first using 'load hivefile'\n"
-msgstr ""
-"hivexsh: należy najpierw wczytać plik \"hive\" używając \"load plik_hive\"\n"
-
-#: sh/hivexsh.c:440
-#, c-format
-msgid "hivexsh: unknown command '%s', use 'help' for help summary\n"
-msgstr ""
-"hivexsh: nieznane polecenie \"%s\", należy użyć \"help\", aby uzyskać "
-"podsumowanie pomocy\n"
-
-#: sh/hivexsh.c:450
-#, c-format
-msgid "hivexsh: load: no hive file name given to load\n"
-msgstr "hivexsh: load: nie podano nazwy pliku \"hive\" do wczytania\n"
-
-#: sh/hivexsh.c:466
-#, c-format
-msgid ""
-"hivexsh: failed to open hive file: %s: %m\n"
-"\n"
-"If you think this file is a valid Windows binary hive file (_not_\n"
-"a regedit *.reg file) then please run this command again using the\n"
-"hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-"which fails into a bug report at https://bugzilla.redhat.com/\n"
-"\n"
-msgstr ""
-"hivexsh: otwarcie pliku \"hive\" nie powiodło się: %s: %m\n"
-"\n"
-"Jeśli ten plik jest binarnym plikiem \"hive\" systemu Windows (a _nie_\n"
-"plikiem *.reg programu regedit), proszę wykonać te polecenie ponownie,\n"
-"używając opcji \"-d\" programu hivexsh i dołączyć pełne wyjście _oraz_ ten\n"
-"plik \"hive\" do zgłoszenia błędu na https://bugzilla.redhat.com/\n"
-"\n"
-
-#: sh/hivexsh.c:499 sh/hivexsh.c:608 sh/hivexsh.c:1074
-#, c-format
-msgid "hivexsh: '%s' command should not be given arguments\n"
-msgstr "hivexsh: polecenie \"%s\" nie przyjmuje parametrów\n"
-
-#: sh/hivexsh.c:541
-#, c-format
-msgid ""
-"%s: %s: \\ characters in path are doubled - are you escaping the path "
-"parameter correctly?\n"
-msgstr ""
-"%s: %s: znaki \\ w ścieżce są podwójne - czy parametr ścieżki jest poprawnie "
-"poprzedzony znakiem modyfikacji?\n"
-
-#: sh/hivexsh.c:579
-#, c-format
-msgid "hivexsh: cd: subkey '%s' not found\n"
-msgstr "hivexsh: cd: nie odnaleziono podklucza \"%s\"\n"
-
-#: sh/hivexsh.c:597
-#, c-format
-msgid ""
-"Navigate through the hive's keys using the 'cd' command, as if it\n"
-"contained a filesystem, and use 'ls' to list the subkeys of the\n"
-"current key. Full documentation is in the hivexsh(1) manual page.\n"
-msgstr ""
-"Należy nawigować między kluczami \"hive\" używając polecenia \"cd\", jakby\n"
-"zawierały system plików oraz \"ls\" do wyświetlania podkluczy bieżącego\n"
-"klucza. Pełna dokumentacja znajduje się na stronie podręcznika hivexsh(1).\n"
-
-#: sh/hivexsh.c:672
-#, c-format
-msgid "%s: %s: key not found\n"
-msgstr "%s: %s: nie odnaleziono klucza\n"
-
-#: sh/hivexsh.c:848 sh/hivexsh.c:952 sh/hivexsh.c:978 sh/hivexsh.c:1007
-#, c-format
-msgid "%s: %s: invalid integer parameter (%s returned %d)\n"
-msgstr "%s: %s: nieprawidłowy parametr liczby całkowitej (%s zwróciło %d)\n"
-
-#: sh/hivexsh.c:853 sh/hivexsh.c:958 sh/hivexsh.c:984 sh/hivexsh.c:1013
-#, c-format
-msgid "%s: %s: integer out of range\n"
-msgstr "%s: %s: liczba całkowita spoza zakresu\n"
-
-#: sh/hivexsh.c:875 sh/hivexsh.c:893
-#, c-format
-msgid "hivexsh: setval: unexpected end of input\n"
-msgstr "hivexsh: setval: nieoczekiwany koniec wejścia\n"
-
-#: sh/hivexsh.c:914 sh/hivexsh.c:933
-#, c-format
-msgid ""
-"hivexsh: string(utf16le): only 7 bit ASCII strings are supported for input\n"
-msgstr ""
-"hivexsh: string(utf16le): tylko 7 bitowe ciągi ASCII są obsługiwane dla "
-"wejścia\n"
-
-#: sh/hivexsh.c:1044
-#, c-format
-msgid "hivexsh: setval: trailing garbage after hex string\n"
-msgstr "hivexsh: setval: uszkodzone wartości po ciągu ósemkowym\n"
-
-#: sh/hivexsh.c:1051
-#, c-format
-msgid ""
-"hivexsh: setval: cannot parse value string, please refer to the man page "
-"hivexsh(1) for help: %s\n"
-msgstr ""
-"hivexsh: setval: nie można przetworzyć ciągu wartości. Proszę zobaczyć "
-"stronę podręcznika hivexsh(1), aby uzyskać pomoc: %s\n"
-
-#: sh/hivexsh.c:1080
-#, c-format
-msgid "hivexsh: del: the root node cannot be deleted\n"
-msgstr "hivexsh: del: główny węzeł nie może zostać usunięty\n"
-
-#: xml/hivexml.c:80
-#, c-format
-msgid "%s: failed to write XML document\n"
-msgstr "%s: zapisanie dokumentu XML nie powiodło się\n"
-
-#: xml/hivexml.c:113
-#, c-format
-msgid "hivexml: missing name of input file\n"
-msgstr "hivexml: brak nazwy pliku wejściowego\n"
-
-#: xml/hivexml.c:132
-#, c-format
-msgid "xmlNewTextWriterFilename: failed to create XML writer\n"
-msgstr "xmlNewTextWriterFilename: utworzenie zapisu XML nie powiodło się\n"
diff --git a/trunk/hivex/po/pt_BR.po b/trunk/hivex/po/pt_BR.po
deleted file mode 100644
index fa74238..0000000
--- a/trunk/hivex/po/pt_BR.po
+++ /dev/null
@@ -1,179 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hivex\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-10-11 12:43+0100\n"
-"PO-Revision-Date: 2011-03-23 17:07+0000\n"
-"Last-Translator: Taylon <taylon@taylon.eti.br>\n"
-"Language-Team: Portuguese (Brazilian) <trans-pt_br@lists.fedoraproject.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1)\n"
-
-#: sh/hivexsh.c:156
-#, c-format
-msgid ""
-"\n"
-"Welcome to hivexsh, the hivex interactive shell for examining\n"
-"Windows Registry binary hive files.\n"
-"\n"
-"Type: 'help' for help summary\n"
-" 'quit' to quit the shell\n"
-"\n"
-msgstr ""
-"\n"
-"Bem-vindo ao hivexsh, o shell interativo hivex usado para examinar\n"
-"arquivos hive de registros binários do Windows.\n"
-"\n"
-"Digite: 'help' para o sumário de ajuda\n"
-" 'quit' para sair do shell\n"
-"\n"
-
-#: sh/hivexsh.c:270
-#, c-format
-msgid "hivexsh: error getting parent of node %zu\n"
-msgstr "hivexsh: erro ao obter a herança do nó %zu\n"
-
-#: sh/hivexsh.c:280
-#, c-format
-msgid "hivexsh: error getting node name of node %zx\n"
-msgstr "hivexsh: erro ao obter o nome do nó %zx\n"
-
-#: sh/hivexsh.c:419
-#, c-format
-msgid "hivexsh: you must load a hive file first using 'load hivefile'\n"
-msgstr ""
-"hivexsh: você deve carregar um arquivo hive antes de usar 'load hivefile'\n"
-
-#: sh/hivexsh.c:440
-#, c-format
-msgid "hivexsh: unknown command '%s', use 'help' for help summary\n"
-msgstr ""
-"hivexsh: comando desconhecido '%s', use 'help' para ver o sumário de ajuda\n"
-
-#: sh/hivexsh.c:450
-#, c-format
-msgid "hivexsh: load: no hive file name given to load\n"
-msgstr ""
-"hivexsh: carregar: não foi dado nenhum nome de arquivo hive para ser "
-"carregado\n"
-
-#: sh/hivexsh.c:466
-#, c-format
-msgid ""
-"hivexsh: failed to open hive file: %s: %m\n"
-"\n"
-"If you think this file is a valid Windows binary hive file (_not_\n"
-"a regedit *.reg file) then please run this command again using the\n"
-"hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-"which fails into a bug report at https://bugzilla.redhat.com/\n"
-"\n"
-msgstr ""
-"hivexsh: falha ao abrir o arquivo hive: %s: %m\n"
-"\n"
-"Se você acha que esse é um arquivo hive válido (e _não_\n"
-"um arquivo do regedit *.reg) então por favor, execute esse comando novamente "
-"usando a\n"
-"opção '-d' do hivexsh e anexe a saída completa _e_ o arquivo hive\n"
-"que causou o erro em um relato de bug em https://bugzilla.redhat.com/\n"
-"\n"
-
-#: sh/hivexsh.c:499 sh/hivexsh.c:608 sh/hivexsh.c:1074
-#, c-format
-msgid "hivexsh: '%s' command should not be given arguments\n"
-msgstr "hivexsh: argumentos não devem ser dados ao comando '%s'\n"
-
-#: sh/hivexsh.c:541
-#, c-format
-msgid ""
-"%s: %s: \\ characters in path are doubled - are you escaping the path "
-"parameter correctly?\n"
-msgstr ""
-"%s: %s: os caracteres \\ no caminho estão duplicados - você está escapando o "
-"parâmetro do caminho corretamente?\n"
-
-#: sh/hivexsh.c:579
-#, c-format
-msgid "hivexsh: cd: subkey '%s' not found\n"
-msgstr "hivexsh: cd: subchave '%s' não encontrada\n"
-
-#: sh/hivexsh.c:597
-#, c-format
-msgid ""
-"Navigate through the hive's keys using the 'cd' command, as if it\n"
-"contained a filesystem, and use 'ls' to list the subkeys of the\n"
-"current key. Full documentation is in the hivexsh(1) manual page.\n"
-msgstr ""
-"Navegar pelas chaves do arquivo hive usando o comando 'cd' como se ele\n"
-"estivesse em um sistema de arquivos, e usar 'ls' para listar as subchaves "
-"da\n"
-"chave atual. A documentação completa está na página de manual hivexsh(1).\n"
-
-#: sh/hivexsh.c:672
-#, c-format
-msgid "%s: %s: key not found\n"
-msgstr "%s: %s: chave não encontrada\n"
-
-#: sh/hivexsh.c:848 sh/hivexsh.c:952 sh/hivexsh.c:978 sh/hivexsh.c:1007
-#, c-format
-msgid "%s: %s: invalid integer parameter (%s returned %d)\n"
-msgstr "%s: %s: parâmetro inteiro inválido (%s retornou %d)\n"
-
-#: sh/hivexsh.c:853 sh/hivexsh.c:958 sh/hivexsh.c:984 sh/hivexsh.c:1013
-#, c-format
-msgid "%s: %s: integer out of range\n"
-msgstr "%s: %s: inteiro fora do limite\n"
-
-#: sh/hivexsh.c:875 sh/hivexsh.c:893
-#, c-format
-msgid "hivexsh: setval: unexpected end of input\n"
-msgstr "hivexsh: setval: fim da entrada inesperado\n"
-
-#: sh/hivexsh.c:914 sh/hivexsh.c:933
-#, c-format
-msgid ""
-"hivexsh: string(utf16le): only 7 bit ASCII strings are supported for input\n"
-msgstr ""
-"hivexsh: string(utf16le): na entrada, apenas strings ASCII 7 bit são "
-"suportadas\n"
-
-#: sh/hivexsh.c:1044
-#, c-format
-msgid "hivexsh: setval: trailing garbage after hex string\n"
-msgstr ""
-
-#: sh/hivexsh.c:1051
-#, c-format
-msgid ""
-"hivexsh: setval: cannot parse value string, please refer to the man page "
-"hivexsh(1) for help: %s\n"
-msgstr ""
-"hivexsh: setval: não foi possível analisar o valor da string, por favor, "
-"consulte a página de manual hivexsh(1) para obter ajuda: %s\n"
-
-#: sh/hivexsh.c:1080
-#, c-format
-msgid "hivexsh: del: the root node cannot be deleted\n"
-msgstr "hivexsh: del: o nó raiz não pode ser deletado\n"
-
-#: xml/hivexml.c:80
-#, c-format
-msgid "%s: failed to write XML document\n"
-msgstr "%s: falha ao escrever o documento XML\n"
-
-#: xml/hivexml.c:113
-#, c-format
-msgid "hivexml: missing name of input file\n"
-msgstr "hivexml: faltando o nome do arquivo de entrada\n"
-
-#: xml/hivexml.c:132
-#, c-format
-msgid "xmlNewTextWriterFilename: failed to create XML writer\n"
-msgstr "xmlNewTextWriterFilename: falha ao criar o escritor de XML\n"
diff --git a/trunk/hivex/po/ru.po b/trunk/hivex/po/ru.po
deleted file mode 100644
index 49f3412..0000000
--- a/trunk/hivex/po/ru.po
+++ /dev/null
@@ -1,178 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hivex\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-10-11 12:43+0100\n"
-"PO-Revision-Date: 2011-03-22 15:29+0000\n"
-"Last-Translator: rjones <rjones@redhat.com>\n"
-"Language-Team: Russian <trans-ru@lists.fedoraproject.org>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2)\n"
-
-#: sh/hivexsh.c:156
-#, c-format
-msgid ""
-"\n"
-"Welcome to hivexsh, the hivex interactive shell for examining\n"
-"Windows Registry binary hive files.\n"
-"\n"
-"Type: 'help' for help summary\n"
-" 'quit' to quit the shell\n"
-"\n"
-msgstr ""
-"\n"
-"Добро пожаловать в hivexsh &mdash; интерактивную оболочку для\n"
-"анализа двоичных файлов куста реестра Windows.\n"
-"\n"
-"Введите «help» для получения помощи, \n"
-" «quit» для выхода из оболочки\n"
-"\n"
-
-#: sh/hivexsh.c:270
-#, c-format
-msgid "hivexsh: error getting parent of node %zu\n"
-msgstr "hivexsh: ошибка получения родительского узла для %zu\n"
-
-#: sh/hivexsh.c:280
-#, c-format
-msgid "hivexsh: error getting node name of node %zx\n"
-msgstr "hivexsh: ошибка получения имени узла для %zx\n"
-
-#: sh/hivexsh.c:419
-#, c-format
-msgid "hivexsh: you must load a hive file first using 'load hivefile'\n"
-msgstr ""
-"hivexsh: сначала необходимо загрузить файл с помощью команды «load "
-"hivefile»\n"
-
-#: sh/hivexsh.c:440
-#, c-format
-msgid "hivexsh: unknown command '%s', use 'help' for help summary\n"
-msgstr ""
-"hivexsh: неизвестная команда «%s». Выполните «help» для получения помощи\n"
-
-#: sh/hivexsh.c:450
-#, c-format
-msgid "hivexsh: load: no hive file name given to load\n"
-msgstr "hivexsh: load: не задан файл для загрузки\n"
-
-#: sh/hivexsh.c:466
-#, c-format
-msgid ""
-"hivexsh: failed to open hive file: %s: %m\n"
-"\n"
-"If you think this file is a valid Windows binary hive file (_not_\n"
-"a regedit *.reg file) then please run this command again using the\n"
-"hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-"which fails into a bug report at https://bugzilla.redhat.com/\n"
-"\n"
-msgstr ""
-"hivexsh: не удалось открыть файл %s: %m\n"
-"\n"
-"Если вы уверены, что этот файл является двоичным файлом куста Windows\n"
-"(НЕ файл *.reg), повторно выполните команду с опцией «-d»\n"
-"и включите её вывод и сам файл куста в отчёт Bugzilla:\n"
-"https://bugzilla.redhat.com/\n"
-"\n"
-
-#: sh/hivexsh.c:499 sh/hivexsh.c:608 sh/hivexsh.c:1074
-#, c-format
-msgid "hivexsh: '%s' command should not be given arguments\n"
-msgstr "hivexsh: не передавайте аргументы команде «%s»\n"
-
-#: sh/hivexsh.c:541
-#, c-format
-msgid ""
-"%s: %s: \\ characters in path are doubled - are you escaping the path "
-"parameter correctly?\n"
-msgstr ""
-"%s: %s: \\ символы в пути повторяются. Проверьте правильность управляющей "
-"последовательности.\n"
-
-#: sh/hivexsh.c:579
-#, c-format
-msgid "hivexsh: cd: subkey '%s' not found\n"
-msgstr "hivexsh: cd: подраздел «%s» не найден\n"
-
-#: sh/hivexsh.c:597
-#, c-format
-msgid ""
-"Navigate through the hive's keys using the 'cd' command, as if it\n"
-"contained a filesystem, and use 'ls' to list the subkeys of the\n"
-"current key. Full documentation is in the hivexsh(1) manual page.\n"
-msgstr ""
-"Переход между разделами куста осуществляется с помощью команды «cd»,\n"
-"аналогично навигации в файловой системе.\n"
-"«ls» позволяет просмотреть список подразделов.\n"
-"Подробную информацию можно найти на странице помощи hivexsh(1).\n"
-
-#: sh/hivexsh.c:672
-#, c-format
-msgid "%s: %s: key not found\n"
-msgstr "%s: %s: раздел не найден\n"
-
-#: sh/hivexsh.c:848 sh/hivexsh.c:952 sh/hivexsh.c:978 sh/hivexsh.c:1007
-#, c-format
-msgid "%s: %s: invalid integer parameter (%s returned %d)\n"
-msgstr "%s: %s: недопустимое целое значение параметра (%s вернул %d)\n"
-
-#: sh/hivexsh.c:853 sh/hivexsh.c:958 sh/hivexsh.c:984 sh/hivexsh.c:1013
-#, c-format
-msgid "%s: %s: integer out of range\n"
-msgstr "%s: %s: целое значение выходит за пределы диапазона\n"
-
-#: sh/hivexsh.c:875 sh/hivexsh.c:893
-#, c-format
-msgid "hivexsh: setval: unexpected end of input\n"
-msgstr "hivexsh: setval: непредвиденный конец ввода\n"
-
-#: sh/hivexsh.c:914 sh/hivexsh.c:933
-#, c-format
-msgid ""
-"hivexsh: string(utf16le): only 7 bit ASCII strings are supported for input\n"
-msgstr ""
-"hivexsh: string(utf16le): при вводе поддерживаются только 7-битные строки "
-"ASCII\n"
-
-#: sh/hivexsh.c:1044
-#, c-format
-msgid "hivexsh: setval: trailing garbage after hex string\n"
-msgstr "hivexsh: setval: мусор в конце шестнадцатеричной строки\n"
-
-#: sh/hivexsh.c:1051
-#, c-format
-msgid ""
-"hivexsh: setval: cannot parse value string, please refer to the man page "
-"hivexsh(1) for help: %s\n"
-msgstr ""
-"hivexsh: setval: не удалось разобрать значение. Обратитесь к странице помощи "
-"hivexsh(1): %s\n"
-
-#: sh/hivexsh.c:1080
-#, c-format
-msgid "hivexsh: del: the root node cannot be deleted\n"
-msgstr "hivexsh: del: невозможно удалить корневой элемент\n"
-
-#: xml/hivexml.c:80
-#, c-format
-msgid "%s: failed to write XML document\n"
-msgstr "%s: не удалось записать XML\n"
-
-#: xml/hivexml.c:113
-#, c-format
-msgid "hivexml: missing name of input file\n"
-msgstr "hivexml: отсутствует имя входного файла\n"
-
-#: xml/hivexml.c:132
-#, c-format
-msgid "xmlNewTextWriterFilename: failed to create XML writer\n"
-msgstr "xmlNewTextWriterFilename: не удалось создать модуль записи XML\n"
diff --git a/trunk/hivex/po/uk.po b/trunk/hivex/po/uk.po
deleted file mode 100644
index 6231947..0000000
--- a/trunk/hivex/po/uk.po
+++ /dev/null
@@ -1,180 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hivex\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-10-11 12:43+0100\n"
-"PO-Revision-Date: 2011-03-22 15:29+0000\n"
-"Last-Translator: yurchor <yurchor@ukr.net>\n"
-"Language-Team: Ukrainian <trans-uk@lists.fedoraproject.org>\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2)\n"
-
-#: sh/hivexsh.c:156
-#, c-format
-msgid ""
-"\n"
-"Welcome to hivexsh, the hivex interactive shell for examining\n"
-"Windows Registry binary hive files.\n"
-"\n"
-"Type: 'help' for help summary\n"
-" 'quit' to quit the shell\n"
-"\n"
-msgstr ""
-"\n"
-"Ласкаво просимо до hivexsh, інтерактивної оболонки hivex для вивчення\n"
-"бінарних файлів гілок регістру Windows.\n"
-"\n"
-"Введіть: «help», щоб переглянути довідку\n"
-" «quit», щоб вийти з оболонки\n"
-"\n"
-
-#: sh/hivexsh.c:270
-#, c-format
-msgid "hivexsh: error getting parent of node %zu\n"
-msgstr "hivexsh: помилка під час отримання батьківського елемента вузла %zu\n"
-
-#: sh/hivexsh.c:280
-#, c-format
-msgid "hivexsh: error getting node name of node %zx\n"
-msgstr "hivexsh: помилка під час спроби отримання назви вузла %zx\n"
-
-#: sh/hivexsh.c:419
-#, c-format
-msgid "hivexsh: you must load a hive file first using 'load hivefile'\n"
-msgstr ""
-"hivexsh: вам слід спочатку завантажити файл гілки за допомогою команди «load "
-"hivefile»\n"
-
-#: sh/hivexsh.c:440
-#, c-format
-msgid "hivexsh: unknown command '%s', use 'help' for help summary\n"
-msgstr ""
-"hivexsh: невідома команда «%s», скористайтеся командою «help», щоб "
-"переглянути довідку щодо команд\n"
-
-#: sh/hivexsh.c:450
-#, c-format
-msgid "hivexsh: load: no hive file name given to load\n"
-msgstr "hivexsh: load: у команді load не вказано назви файла гілки\n"
-
-#: sh/hivexsh.c:466
-#, c-format
-msgid ""
-"hivexsh: failed to open hive file: %s: %m\n"
-"\n"
-"If you think this file is a valid Windows binary hive file (_not_\n"
-"a regedit *.reg file) then please run this command again using the\n"
-"hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-"which fails into a bug report at https://bugzilla.redhat.com/\n"
-"\n"
-msgstr ""
-"hivexsh: не вдалося відкрити файл гілки: %s: %m\n"
-"\n"
-"Якщо ви певні, що цей файл є коректним бінарним файлом гілки Windows (_не_\n"
-"файлом *.reg regedit), повторіть запуск команди з використанням параметра\n"
-"hivexsh «-d», і долучіть виведені дані _та_ файл гілки, який призвів до\n"
-"помилки, до звіту щодо вади на https://bugzilla.redhat.com/\n"
-"\n"
-
-#: sh/hivexsh.c:499 sh/hivexsh.c:608 sh/hivexsh.c:1074
-#, c-format
-msgid "hivexsh: '%s' command should not be given arguments\n"
-msgstr "hivexsh: команді «%s» не потрібно передавати жодних аргументів\n"
-
-#: sh/hivexsh.c:541
-#, c-format
-msgid ""
-"%s: %s: \\ characters in path are doubled - are you escaping the path "
-"parameter correctly?\n"
-msgstr ""
-"%s: %s: символи \\ у визначенні адреси здубльовано. Чи правильно екрановано "
-"параметр адреси?\n"
-
-#: sh/hivexsh.c:579
-#, c-format
-msgid "hivexsh: cd: subkey '%s' not found\n"
-msgstr "hivexsh: cd: не знайдено підключа «%s»\n"
-
-#: sh/hivexsh.c:597
-#, c-format
-msgid ""
-"Navigate through the hive's keys using the 'cd' command, as if it\n"
-"contained a filesystem, and use 'ls' to list the subkeys of the\n"
-"current key. Full documentation is in the hivexsh(1) manual page.\n"
-msgstr ""
-"Перехід між ключами гілки можна здійснювати за допомогою команди «cd»,\n"
-"подібно до переходу теками файлової системи, за допомогою «ls»\n"
-"можна отримувати список підключів поточного ключа. З повною документацією\n"
-"можна ознайомитися за допомогою сторінки підручника (man) hivexsh(1).\n"
-
-#: sh/hivexsh.c:672
-#, c-format
-msgid "%s: %s: key not found\n"
-msgstr "%s: %s: ключ не знайдено\n"
-
-#: sh/hivexsh.c:848 sh/hivexsh.c:952 sh/hivexsh.c:978 sh/hivexsh.c:1007
-#, c-format
-msgid "%s: %s: invalid integer parameter (%s returned %d)\n"
-msgstr "%s: %s: некоректний цілий параметр (%s повернуто %d)\n"
-
-#: sh/hivexsh.c:853 sh/hivexsh.c:958 sh/hivexsh.c:984 sh/hivexsh.c:1013
-#, c-format
-msgid "%s: %s: integer out of range\n"
-msgstr "%s: %s: ціле значення поза межами діапазону\n"
-
-#: sh/hivexsh.c:875 sh/hivexsh.c:893
-#, c-format
-msgid "hivexsh: setval: unexpected end of input\n"
-msgstr "hivexsh: setval: неочікуване завершення вхідних даних\n"
-
-#: sh/hivexsh.c:914 sh/hivexsh.c:933
-#, c-format
-msgid ""
-"hivexsh: string(utf16le): only 7 bit ASCII strings are supported for input\n"
-msgstr ""
-"hivexsh: string(utf16le): передбачено підтримку введення лише 7-бітових "
-"рядків ASCII\n"
-
-#: sh/hivexsh.c:1044
-#, c-format
-msgid "hivexsh: setval: trailing garbage after hex string\n"
-msgstr ""
-"hivexsh: setval: помилкові кінцеві символи після шістнадцяткового рядка\n"
-
-#: sh/hivexsh.c:1051
-#, c-format
-msgid ""
-"hivexsh: setval: cannot parse value string, please refer to the man page "
-"hivexsh(1) for help: %s\n"
-msgstr ""
-"hivexsh: setval: не вдалося обробити рядок значення, будь ласка, зверніться "
-"до сторінки man hivexsh(1), щоб дізнатися більше: %s\n"
-
-#: sh/hivexsh.c:1080
-#, c-format
-msgid "hivexsh: del: the root node cannot be deleted\n"
-msgstr "hivexsh: del: не можна вилучати кореневий вузол\n"
-
-#: xml/hivexml.c:80
-#, c-format
-msgid "%s: failed to write XML document\n"
-msgstr "%s: не вдалося виконати запис документа XML\n"
-
-#: xml/hivexml.c:113
-#, c-format
-msgid "hivexml: missing name of input file\n"
-msgstr "hivexml: не вказано назви файла вхідних даних\n"
-
-#: xml/hivexml.c:132
-#, c-format
-msgid "xmlNewTextWriterFilename: failed to create XML writer\n"
-msgstr "xmlNewTextWriterFilename: не вдалося створити процес запису XML\n"
diff --git a/trunk/hivex/po/zh_CN.po b/trunk/hivex/po/zh_CN.po
deleted file mode 100644
index ed58a99..0000000
--- a/trunk/hivex/po/zh_CN.po
+++ /dev/null
@@ -1,168 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hivex\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-10-11 12:43+0100\n"
-"PO-Revision-Date: 2011-03-26 15:06+0000\n"
-"Last-Translator: lovenemesis <lovenemesis@gmail.com>\n"
-"Language-Team: Chinese (China) <None>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0\n"
-
-#: sh/hivexsh.c:156
-#, c-format
-msgid ""
-"\n"
-"Welcome to hivexsh, the hivex interactive shell for examining\n"
-"Windows Registry binary hive files.\n"
-"\n"
-"Type: 'help' for help summary\n"
-" 'quit' to quit the shell\n"
-"\n"
-msgstr ""
-"\n"
-"欢迎使用 hivexsh, Windows 注册表二进制 hive \n"
-"文件交互式命令行程序。\n"
-"\n"
-"输入： 'help' 来获得简略帮助\n"
-" 'quit' 来退出命令行\n"
-"\n"
-
-#: sh/hivexsh.c:270
-#, c-format
-msgid "hivexsh: error getting parent of node %zu\n"
-msgstr "hivexsh：获取父节点 %zu 错误\n"
-
-#: sh/hivexsh.c:280
-#, c-format
-msgid "hivexsh: error getting node name of node %zx\n"
-msgstr "hivexsh：获取节点 %zx 名称错误\n"
-
-#: sh/hivexsh.c:419
-#, c-format
-msgid "hivexsh: you must load a hive file first using 'load hivefile'\n"
-msgstr "hivexsh: 您必须首先使用 'load hivefile' 来载入一个 hive 文件\n"
-
-#: sh/hivexsh.c:440
-#, c-format
-msgid "hivexsh: unknown command '%s', use 'help' for help summary\n"
-msgstr "hivexsh: 未知的命令 '%s'，使用 'help' 来获得简略帮助\n"
-
-#: sh/hivexsh.c:450
-#, c-format
-msgid "hivexsh: load: no hive file name given to load\n"
-msgstr "hivexsh: 载入： 指定的 hive 文件不存在\n"
-
-#: sh/hivexsh.c:466
-#, c-format
-msgid ""
-"hivexsh: failed to open hive file: %s: %m\n"
-"\n"
-"If you think this file is a valid Windows binary hive file (_not_\n"
-"a regedit *.reg file) then please run this command again using the\n"
-"hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-"which fails into a bug report at https://bugzilla.redhat.com/\n"
-"\n"
-msgstr ""
-"hivexsh: 打开 hive 文件失败： %s： %m\n"
-"\n"
-"如果您认为该文件确实是有效的 Windows 二进制 hive 文件(_不是_\n"
-"注册表 *.reg 文件) 那么请再次使用 '-d' 选项运行\n"
-"hivexsh 并将完整的输出_和_失败的hive文件做为错误报告\n"
-"的附件，提交至 https://bugzilla.redhat.com/\n"
-"\n"
-
-#: sh/hivexsh.c:499 sh/hivexsh.c:608 sh/hivexsh.c:1074
-#, c-format
-msgid "hivexsh: '%s' command should not be given arguments\n"
-msgstr "hivexsh: '%s' 命令不应该包含任何参数\n"
-
-#: sh/hivexsh.c:541
-#, c-format
-msgid ""
-"%s: %s: \\ characters in path are doubled - are you escaping the path "
-"parameter correctly?\n"
-msgstr "%s: %s: \\ 字符在路径中出现两次 - 您正确换码了路径参数吗？\n"
-
-#: sh/hivexsh.c:579
-#, c-format
-msgid "hivexsh: cd: subkey '%s' not found\n"
-msgstr "hivexsh: cd: 子键 '%s' 未找到\n"
-
-#: sh/hivexsh.c:597
-#, c-format
-msgid ""
-"Navigate through the hive's keys using the 'cd' command, as if it\n"
-"contained a filesystem, and use 'ls' to list the subkeys of the\n"
-"current key. Full documentation is in the hivexsh(1) manual page.\n"
-msgstr ""
-"使用 'cd' 命令在 hive 键之间跳转，如同它\n"
-"包含了文件系统一样，并使用 'ls' 来列出当前键之下的子键。\n"
-" 完整的说明位于 hivexsh(1) 手册中。\n"
-
-#: sh/hivexsh.c:672
-#, c-format
-msgid "%s: %s: key not found\n"
-msgstr "%s: %s: 键未找到\n"
-
-#: sh/hivexsh.c:848 sh/hivexsh.c:952 sh/hivexsh.c:978 sh/hivexsh.c:1007
-#, c-format
-msgid "%s: %s: invalid integer parameter (%s returned %d)\n"
-msgstr "%s: %s: 非法的整数参数 (%s 返回 %d)\n"
-
-#: sh/hivexsh.c:853 sh/hivexsh.c:958 sh/hivexsh.c:984 sh/hivexsh.c:1013
-#, c-format
-msgid "%s: %s: integer out of range\n"
-msgstr "%s: %s: 超出范围的整数\n"
-
-#: sh/hivexsh.c:875 sh/hivexsh.c:893
-#, c-format
-msgid "hivexsh: setval: unexpected end of input\n"
-msgstr "hivexsh: setval: 输入意外结束\n"
-
-#: sh/hivexsh.c:914 sh/hivexsh.c:933
-#, c-format
-msgid ""
-"hivexsh: string(utf16le): only 7 bit ASCII strings are supported for input\n"
-msgstr "hivexsh: string(utf16le): 仅支持输入 7 bit ASCII 字符串\n"
-
-#: sh/hivexsh.c:1044
-#, c-format
-msgid "hivexsh: setval: trailing garbage after hex string\n"
-msgstr "hivexsh: setval: 十六进制字符串后包含无用的结尾\n"
-
-#: sh/hivexsh.c:1051
-#, c-format
-msgid ""
-"hivexsh: setval: cannot parse value string, please refer to the man page "
-"hivexsh(1) for help: %s\n"
-msgstr ""
-"hivexsh: setval: 不能解析值域字符串，请参阅手册页 hivexsh(1) 以获得帮助：%s\n"
-
-#: sh/hivexsh.c:1080
-#, c-format
-msgid "hivexsh: del: the root node cannot be deleted\n"
-msgstr "hivexsh: del: 不能删除根节点\n"
-
-#: xml/hivexml.c:80
-#, c-format
-msgid "%s: failed to write XML document\n"
-msgstr "%s: 写入 XML 文档失败\n"
-
-#: xml/hivexml.c:113
-#, c-format
-msgid "hivexml: missing name of input file\n"
-msgstr "hivexml: 缺少输入文件名\n"
-
-#: xml/hivexml.c:132
-#, c-format
-msgid "xmlNewTextWriterFilename: failed to create XML writer\n"
-msgstr "xmlNewTextWriterFilename: 创建 XML 写入器失败\n"
diff --git a/trunk/hivex/python/Makefile.am b/trunk/hivex/python/Makefile.am
deleted file mode 100644
index 034f9c7..0000000
--- a/trunk/hivex/python/Makefile.am
+++ /dev/null
@@ -1,48 +0,0 @@
-# hivex Python bindings
-# Copyright (C) 2009-2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# Old RHEL 5 autoconf doesn't have builddir.
-builddir ?= $(top_builddir)/python
-
-EXTRA_DIST = \
- run-python-tests \
- hivex.py \
- hivex-py.c \
- t/*.py
-
-if HAVE_PYTHON
-
-pythondir = $(PYTHON_INSTALLDIR)
-
-python_DATA = hivex.py
-
-python_LTLIBRARIES = libhivexmod.la
-
-libhivexmod_la_SOURCES = hivex-py.c
-libhivexmod_la_CFLAGS = -Wall $(PYTHON_CFLAGS) \
- -I$(top_srcdir)/lib -I$(top_builddir)/lib
-libhivexmod_la_LIBADD = $(top_builddir)/lib/libhivex.la
-libhivexmod_la_LDFLAGS = -avoid-version -shared -module -shrext $(PYTHON_EXT_SUFFIX)
-
-TESTS_ENVIRONMENT = \
- PYTHONPATH=$(builddir):$(builddir)/.libs
-
-TESTS = run-python-tests
-
-CLEANFILES = hivex.pyc
-
-endif
diff --git a/trunk/hivex/python/run-python-tests.in b/trunk/hivex/python/run-python-tests.in
deleted file mode 100755
index 70e8165..0000000
--- a/trunk/hivex/python/run-python-tests.in
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash -
-# hivex Python bindings
-# Copyright (C) 2009-2011 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-set -e
-shopt -s nullglob
-
-for f in @srcdir@t/*.py; do
- basename "$f"
- @PYTHON@ "$f"
-done
diff --git a/trunk/hivex/python/t/010-import.py b/trunk/hivex/python/t/010-import.py
deleted file mode 100644
index 9979914..0000000
--- a/trunk/hivex/python/t/010-import.py
+++ /dev/null
@@ -1,18 +0,0 @@
-# hivex Python bindings
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-import hivex
diff --git a/trunk/hivex/python/t/020-open.py b/trunk/hivex/python/t/020-open.py
deleted file mode 100644
index 57339a7..0000000
--- a/trunk/hivex/python/t/020-open.py
+++ /dev/null
@@ -1,26 +0,0 @@
-# hivex Python bindings
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-import os
-import hivex
-
-srcdir = os.environ["srcdir"]
-if not srcdir:
- srcdir = "."
-
-h = hivex.Hivex ("%s/../images/minimal" % srcdir)
-assert h
diff --git a/trunk/hivex/python/t/021-close.py b/trunk/hivex/python/t/021-close.py
deleted file mode 100644
index 876836d..0000000
--- a/trunk/hivex/python/t/021-close.py
+++ /dev/null
@@ -1,28 +0,0 @@
-# hivex Python bindings
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-import os
-import hivex
-
-srcdir = os.environ["srcdir"]
-if not srcdir:
- srcdir = "."
-
-h = hivex.Hivex ("%s/../images/minimal" % srcdir)
-assert h
-
-del h
diff --git a/trunk/hivex/python/t/120-rlenvalue.py b/trunk/hivex/python/t/120-rlenvalue.py
deleted file mode 100644
index ebc48f5..0000000
--- a/trunk/hivex/python/t/120-rlenvalue.py
+++ /dev/null
@@ -1,42 +0,0 @@
-# hivex Python bindings
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# Demonstrate value_data_cell_offset by looking at the value data at
-# "\$$$PROTO.HIV\ModerateValueParent\33Bytes", verified to be at file
-# offset 8680 (0x21e8) of the hive rlenvalue_test_hive. The returned
-# length and offset for this value cell should be 37 bytes, position
-# 8712.
-
-import os
-import hivex
-
-srcdir = os.environ["srcdir"]
-if not srcdir:
- srcdir = "."
-
-h = hivex.Hivex ("%s/../images/rlenvalue_test_hive" % srcdir)
-assert h
-
-root = h.root ()
-
-moderate_value_node = h.node_get_child (root, "ModerateValueParent")
-
-moderate_value_value = h.node_get_value (moderate_value_node, "33Bytes")
-
-r = h.value_data_cell_offset (moderate_value_value)
-assert r[0] == 37L
-assert r[1] == 8712L
diff --git a/trunk/hivex/python/t/200-write.py b/trunk/hivex/python/t/200-write.py
deleted file mode 100644
index 0692f11..0000000
--- a/trunk/hivex/python/t/200-write.py
+++ /dev/null
@@ -1,43 +0,0 @@
-# hivex Python bindings
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-import os
-import hivex
-
-srcdir = os.environ["srcdir"]
-if not srcdir:
- srcdir = "."
-
-h = hivex.Hivex ("%s/../images/minimal" % srcdir,
- write = True)
-assert h
-
-root = h.root ()
-assert root
-
-h.node_add_child (root, "A")
-
-h.node_add_child (root, "B")
-
-b = h.node_get_child (root, "B")
-assert b
-
-values = [
- { "key": "Key1", "t": 3, "value": "ABC" },
- { "key": "Key2", "t": 3, "value": "DEF" }
-]
-h.node_set_values (b, values)
diff --git a/trunk/hivex/python/t/210-setvalue.py b/trunk/hivex/python/t/210-setvalue.py
deleted file mode 100644
index 9d93519..0000000
--- a/trunk/hivex/python/t/210-setvalue.py
+++ /dev/null
@@ -1,66 +0,0 @@
-# hivex Python bindings
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-import sys
-import os
-import hivex
-
-srcdir = os.environ["srcdir"]
-if not srcdir:
- srcdir = "."
-
-h = hivex.Hivex ("%s/../images/minimal" % srcdir,
- write = True)
-assert h
-
-root = h.root ()
-assert root
-
-h.node_add_child (root, "B")
-
-b = h.node_get_child (root, "B")
-assert b
-
-values = [
- { "key": "Key1", "t": 3, "value": "ABC" },
- { "key": "Key2", "t": 3, "value": "DEF" }
-]
-h.node_set_values (b, values)
-
-value1 = { "key": "Key3", "t": 3, "value": "GHI" }
-h.node_set_value (b, value1)
-
-value1 = { "key": "Key1", "t": 3, "value": "JKL" }
-h.node_set_value (b, value1)
-
-# In Python2, the data is returned as a string. In Python3, it is
-# returned as bytes. Provide a function to convert either to a string.
-def to_string (data):
- if sys.version_info[0] == 2:
- return data
- else:
- return str (data, "utf-8")
-
-val = h.node_get_value (b, "Key1")
-t_data = h.value_value (val)
-assert t_data[0] == 3
-assert to_string (t_data[1]) == "JKL"
-
-val = h.node_get_value (b, "Key3")
-t_data = h.value_value (val)
-assert t_data[0] == 3
-assert to_string (t_data[1]) == "GHI"
diff --git a/trunk/hivex/regedit/Makefile.am b/trunk/hivex/regedit/Makefile.am
deleted file mode 100644
index 4353ee8..0000000
--- a/trunk/hivex/regedit/Makefile.am
+++ /dev/null
@@ -1,45 +0,0 @@
-# hivex
-# Copyright (C) 2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-EXTRA_DIST = \
- hivexregedit \
- run-locally
-
-bin_SCRIPTS = hivexregedit
-
-man_MANS = hivexregedit.1
-
-hivexregedit.1: hivexregedit
- $(POD2MAN) \
- --section 1 \
- -c "Windows Registry" \
- --name "hivexregedit" \
- --release "$(PACKAGE_NAME)-$(PACKAGE_VERSION)" \
- $< > $@-t; mv $@-t $@
-
-noinst_DATA = \
- $(top_builddir)/html/hivexregedit.1.html
-
-$(top_builddir)/html/hivexregedit.1.html: hivexregedit
- mkdir -p $(top_builddir)/html
- cd $(top_builddir) && pod2html \
- --css 'pod.css' \
- --htmldir html \
- --outfile html/hivexregedit.1.html \
- regedit/hivexregedit
-
-CLEANFILES = $(man_MANS)
diff --git a/trunk/hivex/regedit/hivexregedit b/trunk/hivex/regedit/hivexregedit
deleted file mode 100755
index 0e534de..0000000
--- a/trunk/hivex/regedit/hivexregedit
+++ /dev/null
@@ -1,355 +0,0 @@
-#!/usr/bin/perl -w
-# Copyright (C) 2010-2011 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-use warnings;
-use strict;
-
-use Win::Hivex;
-use Win::Hivex::Regedit qw(reg_import reg_export);
-
-use Pod::Usage;
-use Getopt::Long;
-
-=encoding utf8
-
-=head1 NAME
-
-hivexregedit - Merge and export Registry changes from regedit-format files.
-
-=head1 SYNOPSIS
-
- hivexregedit --merge [--prefix prefix] [--encoding enc] \
- hivefile [regfile]
-
- hivexregedit --export [--prefix prefix] hivefile key > regfile
-
-=head1 DESCRIPTION
-
-Please note hivexregedit is a low-level tool for manipulating hive
-files directly. To merge or export registry changes to Windows
-virtual machines it's better to use L<virt-win-reg(1)>.
-
-Given a local binary ("hive") file, there are two modes. C<--merge>
-imports (merges) changes from a regedit-format file into the hive. It
-is similar to using the C</s> switch in Windows regedit.exe.
-
-C<--export> exports a Registry key (recursively) into the regedit format.
-
-=head2 ENCODING
-
-C<hivexregedit> expects that regedit files have already been re-encoded
-in the local encoding. Usually on Linux hosts, this means UTF-8 with
-Unix-style line endings. Since Windows regedit files are often in
-UTF-16LE with Windows-style line endings, you may need to re-encode the
-whole file before or after processing.
-
-To re-encode a file from Windows format to Linux (before processing it
-with the C<--merge> option), you would do something like this:
-
- iconv -f utf-16le -t utf-8 < win.reg | dos2unix > linux.reg
-
-To go in the opposite direction, after using C<--export> and before
-sending the file to a Windows user, do something like this:
-
- unix2dos < linux.reg | iconv -f utf-8 -t utf-16le > win.reg
-
-For more information about encoding, see L<Win::Hivex::Regedit(3)>.
-
-If you are unsure about the current encoding, use the L<file(1)>
-command. Recent versions of Windows regedit.exe produce a UTF-16LE
-file with Windows-style (CRLF) line endings, like this:
-
- $ file software.reg
- software.reg: Little-endian UTF-16 Unicode text, with very long lines,
- with CRLF line terminators
-
-This file would need conversion before you could C<--merge> it.
-
-=head2 SHELL QUOTING
-
-Be careful when passing parameters containing C<\> (backslash) in the
-shell. Usually you will have to use 'single quotes' or double
-backslashes (but not both) to protect them from the shell.
-
-=head2 CurrentControlSet etc.
-
-Registry keys like C<CurrentControlSet> don't really exist in the
-Windows Registry at the level of the hive file, and therefore you
-cannot modify these.
-
-C<CurrentControlSet> is usually an alias for C<ControlSet001>. In
-some circumstances it might refer to another control set. The way
-to find out is to look at the C<HKLM\SYSTEM\Select> key:
-
- $ hivexregedit --export SYSTEM '\Select'
- [\Select]
- "Current"=dword:00000001
- "Default"=dword:00000001
- "Failed"=dword:00000000
- "LastKnownGood"=dword:00000002
-
-"Current" is the one which Windows will choose when it boots.
-
-Similarly, other C<Current...> keys in the path may need to
-be replaced.
-
-=head1 EXAMPLE
-
- $ virt-cat WindowsGuest /Windows/System32/config/software > software.hive
- $ hivexregedit --export \
- --prefix 'HKEY_LOCAL_MACHINE\SOFTWARE' \
- software.hive '\Microsoft' > ms-keys.reg
-
- $ hivexregedit --merge system.hive \
- --prefix 'HKEY_LOCAL_MACHINE\SYSTEM' additions.reg
-
-=head1 OPTIONS
-
-=over 4
-
-=cut
-
-my $help;
-
-=item B<--help>
-
-Display help.
-
-=cut
-
-my $debug;
-
-=item B<--debug>
-
-Enable debugging in the hivex library. This is useful for diagnosing
-bugs and also malformed hive files.
-
-=cut
-
-my $merge;
-
-=item B<--merge>
-
- hivexregedit --merge [--prefix prefix] [--encoding enc] \
- hivefile [regfile]
-
-Merge C<regfile> (a regedit-format text file) into the hive
-C<hivefile>. If C<regfile> is omitted, then the program reads from
-standard input. (Also you can give multiple input files).
-
-C<--prefix> specifies the Windows Registry prefix. It is almost
-always necessary to use this when dealing with real hive files.
-
-C<--encoding> specifies the encoding for unmarked strings in the
-input. It defaults to C<UTF-16LE> which should work for recent
-versions of Windows. Another possibility is to use C<ASCII>.
-
-=cut
-
-my $export;
-
-=item B<--export>
-
- hivexregedit --export [--prefix prefix] hivefile key > regfile
-
-C<key> is a path within the hive C<hivefile>. (The key should not
-contain any prefix and should be quoted to defend backslashes from the
-shell). The key is exported, recursively, to standard output in the
-textual regedit format.
-
-C<--prefix> specifies the Windows Registry prefix. It is almost
-always necessary to use this when dealing with real hive files.
-
-=cut
-
-my $prefix;
-
-=item B<--prefix> prefix
-
-Hive files and Windows Registry key names are indirectly related. For
-example, inside the software hive, all keys are stored relative to
-C<HKEY_LOCAL_MACHINE\SOFTWARE>. Thus
-C<HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft> appears in the hive file as
-C<\Microsoft>.
-
-The hive format itself does not store this prefix, so you have to
-supply it based on outside knowledge. (L<virt-win-reg(1)>, amongst
-other things, already knows about this).
-
-Usually it is sufficient to pass the parameter
-C<--prefix 'HKEY_LOCAL_MACHINE\SOFTWARE'> or similar when doing
-merges and exports.
-
-=cut
-
-my $encoding;
-
-=item B<--encoding> UTF-16LE|ASCII
-
-When merging (only), you may need to specify the encoding for strings
-to be used in the hive file. This is explained in detail in
-L<Win::Hivex::Regedit(3)/ENCODING STRINGS>.
-
-The default is to use UTF-16LE, which should work with recent versions
-of Windows.
-
-=cut
-
-my $unsafe_printable_strings;
-
-=item B<--unsafe-printable-strings>
-
-When exporting (only), assume strings are UTF-16LE and print them as
-strings instead of hex sequences. Remove the final zero codepoint
-from strings if present.
-
-This is unsafe and does not preserve the fidelity of strings in the
-original hive for various reasons:
-
-=over 4
-
-=item *
-
-Assumes the original encoding is UTF-16LE. ASCII strings and strings
-in other encodings will be corrupted by this transformation.
-
-=item *
-
-Assumes that everything which has type 1 or 2 is really a string
-and that everything else is not a string, but the type field in
-real hives is not reliable.
-
-=item *
-
-Loses information about whether a zero codepoint followed the string
-in the hive or not.
-
-=back
-
-This all happens because the hive itself contains no information about
-how strings are encoded (see
-L<Win::Hivex::Regedit(3)/ENCODING STRINGS>).
-
-You should only use this option for quick hacking and debugging of the
-hive contents, and I<never> use it if the output is going to be passed
-into another program or stored in another hive.
-
-=back
-
-=cut
-
-GetOptions ("help|?" => \$help,
- "debug" => \$debug,
- "merge|import" => \$merge,
- "export" => \$export,
- "prefix=s" => \$prefix,
- "encoding=s" => \$encoding,
- "unsafe-printable-strings" => \$unsafe_printable_strings,
- ) or pod2usage (2);
-pod2usage (1) if $help;
-
-if ($merge && $export) {
- die "hivexregedit: cannot use --merge and --export at the same time\n"
-}
-
-unless ($merge || $export) {
- die "hivexregedit: use --merge or --export, see the manpage for help\n"
-}
-
-if ($export && defined $encoding) {
- die "hivexregedit: --encoding has no effect when used with --export\n"
-}
-
-if ($merge) { # --merge (reg_import)
- if (@ARGV < 1) {
- die "hivexregedit --merge hivefile [input.reg ...]\n"
- }
-
- my $hivefile = shift @ARGV;
-
- my $h = Win::Hivex->open ($hivefile, write => 1, debug => $debug);
-
- # Read from stdin unless other files have been specified.
- unshift (@ARGV, '-') unless @ARGV;
-
- foreach (@ARGV) {
- open FILE, $_ or die "$_: $!";
- reg_import (\*FILE, sub {
- local $_ = shift;
- # Remove prefix from the start of the path, matching
- # case insensitively.
- if (defined $prefix) {
- my $len = length $prefix;
- if (length $_ >= $len &&
- lc (substr ($_, 0, $len)) eq lc ($prefix)) {
- $_ = substr ($_, $len);
- }
- }
- ($h, $_)
- });
- }
-
- $h->commit (undef);
-} else { # --export (reg_export)
- if (@ARGV != 2) {
- die "hivexregedit --export hivefile key\n"
- }
-
- my $hivefile = shift @ARGV;
- my $key = shift @ARGV;
-
- my $h = Win::Hivex->open ($hivefile, debug => $debug);
-
- print "Windows Registry Editor Version 5.00\n\n";
-
- reg_export ($h, $key, \*STDOUT,
- prefix => $prefix,
- unsafe_printable_strings => $unsafe_printable_strings);
-}
-
-=head1 SEE ALSO
-
-L<virt-win-reg(1)>,
-L<Win::Hivex::Regedit(3)>,
-L<Win::Hivex(3)>,
-L<hivexsh(1)>,
-L<dos2unix(1)>,
-L<unix2dos(1)>,
-L<iconv(1)>,
-L<http://libguestfs.org/>.
-
-=head1 AUTHOR
-
-Richard W.M. Jones L<http://people.redhat.com/~rjones/>
-
-=head1 COPYRIGHT
-
-Copyright (C) 2010 Red Hat Inc.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
diff --git a/trunk/hivex/regedit/run-locally b/trunk/hivex/regedit/run-locally
deleted file mode 100755
index 9d9cca9..0000000
--- a/trunk/hivex/regedit/run-locally
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/usr/bin/perl
-# Copyright (C) 2009 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# This script sets up the environment so you can run hivexregedit in
-# place without needing to do 'make install' first.
-#
-# Use it like this:
-# ./run-locally [usual hivexregedit args ...]
-# eg:
-# ./run-locally --export software.hive '\Microsoft'
-
-use strict;
-use warnings;
-
-use File::Basename qw(dirname);
-use File::Spec;
-use Cwd qw(abs_path);
-
-my $path = $0;
-
-# Follow symlinks until we get to the real file
-while(-l $path) {
- my $link = readlink($path) or die "readlink: $path: $!";
- if(File::Spec->file_name_is_absolute($link)) {
- $path = $link;
- } else {
- $path = File::Spec->catfile(dirname($path), $link);
- }
-}
-
-# Get the absolute path of the parent directory
-$path = abs_path(dirname($path).'/..');
-
-$ENV{LD_LIBRARY_PATH} = $path.'/lib/.libs';
-$ENV{PERL5LIB} = $path.'/perl/blib/lib:'.$path.'/perl/blib/arch';
-
-#print (join " ", ("$path/regedit/hivexregedit", @ARGV), "\n");
-exec('perl', "$path/regedit/hivexregedit", @ARGV);
diff --git a/trunk/hivex/ruby/Makefile.am b/trunk/hivex/ruby/Makefile.am
deleted file mode 100644
index 7e57516..0000000
--- a/trunk/hivex/ruby/Makefile.am
+++ /dev/null
@@ -1,59 +0,0 @@
-# hivex Ruby bindings
-# Copyright (C) 2009-2011 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-EXTRA_DIST = \
- Rakefile.in \
- README.rdoc \
- doc/site/index.html \
- ext/hivex/extconf.rb \
- ext/hivex/_hivex.c \
- lib/hivex.rb \
- run-ruby-tests \
- tests/tc_*.rb
-
-CLEANFILES = \
- lib/*~ \
- tests/*~ \
- ext/hivex/*~ \
- ext/hivex/extconf.h \
- ext/hivex/_hivex.o \
- ext/hivex/_hivex.so \
- ext/hivex/mkmf.log \
- ext/hivex/Makefile
-
-if HAVE_RUBY
-
-TESTS = run-ruby-tests
-
-TESTS_ENVIRONMENT = \
- LD_LIBRARY_PATH=$(top_builddir)/src/.libs \
- RUBY=$(RUBY) RAKE=$(RAKE)
-
-all:
- $(RAKE) build
- $(RAKE) rdoc
-
-RUBY_SITELIB := $(shell $(RUBY) -rrbconfig -e "puts RbConfig::CONFIG['sitelibdir']")
-RUBY_SITEARCH := $(shell $(RUBY) -rrbconfig -e "puts RbConfig::CONFIG['sitearchdir']")
-
-install:
- $(MKDIR_P) $(DESTDIR)$(RUBY_SITELIB)
- $(MKDIR_P) $(DESTDIR)$(RUBY_SITEARCH)
- $(INSTALL) -p -m 0644 lib/hivex.rb $(DESTDIR)$(RUBY_SITELIB)
- $(INSTALL) -p -m 0755 ext/hivex/_hivex.so $(DESTDIR)$(RUBY_SITEARCH)
-
-endif
diff --git a/trunk/hivex/ruby/README.rdoc b/trunk/hivex/ruby/README.rdoc
deleted file mode 100644
index 7965650..0000000
--- a/trunk/hivex/ruby/README.rdoc
+++ /dev/null
@@ -1,4 +0,0 @@
-= Ruby bindings for hivex
-
-The module Hivex provides Ruby bindings for
-{the hivex API}[http://libguestfs.org/hivex.3.html].
diff --git a/trunk/hivex/ruby/Rakefile.in b/trunk/hivex/ruby/Rakefile.in
deleted file mode 100644
index 204e37c..0000000
--- a/trunk/hivex/ruby/Rakefile.in
+++ /dev/null
@@ -1,129 +0,0 @@
-# hivex Ruby bindings -*- ruby -*-
-# @configure_input@
-# Copyright (C) 2009-2011 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-require 'rake/clean'
-require 'rake/testtask'
-
-# Used to be rake/rdoctask. Now it's rdoc/task.
-begin
- require 'rdoc/task'
-rescue
- require 'rake/rdoctask'
-end
-
-# Used to be rake/gempackagetask. Now it's rubygems/package_task. Also
-# we need to use the appropriate class name below.
-begin
- require 'rubygems/package_task'
- gempackagetask='Gem::PackageTask'
-rescue
- require 'rake/gempackagetask'
- gempackagetask='Rake::GemPackageTask'
-end
-
-PKG_NAME='@PACKAGE_NAME@'
-PKG_VERSION='@PACKAGE_VERSION@'
-
-EXT_CONF='@abs_srcdir@/ext/hivex/extconf.rb'
-MAKEFILE='@builddir@/ext/hivex/Makefile'
-HIVEX_MODULE='@builddir@/ext/hivex/_hivex.so'
-HIVEX_SRC='@abs_srcdir@/ext/hivex/_hivex.c'
-
-CLEAN.include [ "@builddir@/ext/**/*.o", HIVEX_MODULE,
- "@builddir@/ext/**/depend" ]
-
-CLOBBER.include [ "@builddir@/config.save", "@builddir@/ext/**/mkmf.log",
- MAKEFILE ]
-
-# Build locally
-
-file MAKEFILE => EXT_CONF do |t|
- unless sh "top_srcdir=$(pwd)/@top_srcdir@; top_builddir=$(pwd)/@top_builddir@; export ARCHFLAGS=\"-arch $(uname -m)\"; mkdir -p @builddir@/ext/hivex; cd @builddir@/ext/hivex; @RUBY@ #{EXT_CONF} --with-_hivex-include=$top_srcdir/lib --with-_hivex-lib=$top_builddir/lib/.libs"
- $stderr.puts "Failed to run extconf"
- break
- end
-end
-file HIVEX_MODULE => [ MAKEFILE, HIVEX_SRC ] do |t|
- Dir::chdir("@builddir@/ext/hivex") do
- unless sh "make"
- $stderr.puts "make failed"
- break
- end
- end
-end
-desc "Build the native library"
-task :build => HIVEX_MODULE
-
-Rake::TestTask.new(:test) do |t|
- t.test_files = FileList['tests/tc_*.rb']
- t.libs = [ 'lib', 'ext/hivex' ]
-end
-task :test => :build
-
-RDOC_FILES = FileList[
- "@srcdir@/README.rdoc",
- "@srcdir@/lib/**/*.rb",
- "@srcdir@/ext/**/*.[ch]"
-]
-
-Rake::RDocTask.new do |rd|
- rd.main = "@srcdir@/README.rdoc"
- rd.rdoc_dir = "doc/site/api"
- rd.rdoc_files.include(RDOC_FILES)
-end
-
-Rake::RDocTask.new(:ri) do |rd|
- rd.main = "@srcdir@/README.rdoc"
- rd.rdoc_dir = "doc/ri"
- rd.options << "--ri-system"
- rd.rdoc_files.include(RDOC_FILES)
-end
-
-# Package tasks
-
-PKG_FILES = FileList[
- "Rakefile", "COPYING", "README", "NEWS", "@srcdir@/README.rdoc",
- "lib/**/*.rb",
- "ext/**/*.[ch]", "ext/**/MANIFEST", "ext/**/extconf.rb",
- "tests/**/*",
- "spec/**/*"
-]
-
-DIST_FILES = FileList[
- "pkg/*.src.rpm", "pkg/*.gem", "pkg/*.zip", "pkg/*.tgz"
-]
-
-SPEC = Gem::Specification.new do |s|
- s.name = PKG_NAME
- s.version = PKG_VERSION
- s.email = "rjones@redhat.com"
- s.homepage = "http://libguestfs.org/"
- s.summary = "Ruby bindings for hivex"
- s.files = PKG_FILES
- s.autorequire = "hivex"
- s.required_ruby_version = '>= 1.8.1'
- s.extensions = "ext/hivex/extconf.rb"
- s.description = <<EOF
-Ruby bindings for hivex.
-EOF
-end
-
-eval(gempackagetask).new(SPEC) do |pkg|
- pkg.need_tar = true
- pkg.need_zip = true
-end
diff --git a/trunk/hivex/ruby/doc/site/index.html b/trunk/hivex/ruby/doc/site/index.html
deleted file mode 100644
index c97f0e0..0000000
--- a/trunk/hivex/ruby/doc/site/index.html
+++ /dev/null
@@ -1,8 +0,0 @@
-<html>
-<head><title>Ruby documentation for hivex</title></head>
-<body>
-<p>
- <a href="api/index.html">Ruby API documentation for hivex</a>
-</p>
-</body>
-</html>
diff --git a/trunk/hivex/ruby/ext/hivex/extconf.rb b/trunk/hivex/ruby/ext/hivex/extconf.rb
deleted file mode 100644
index c144c4b..0000000
--- a/trunk/hivex/ruby/ext/hivex/extconf.rb
+++ /dev/null
@@ -1,33 +0,0 @@
-# hivex Ruby bindings -*- ruby -*-
-# @configure_input@
-# Copyright (C) 2009-2011 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-require 'mkmf'
-
-extension_name = '_hivex'
-
-dir_config(extension_name)
-
-unless have_header("hivex.h")
- raise "<hivex.h> not found"
-end
-unless have_library("hivex", "hivex_open", "hivex.h")
- raise "hivex library not found"
-end
-
-create_header
-create_makefile(extension_name)
diff --git a/trunk/hivex/ruby/lib/hivex.rb b/trunk/hivex/ruby/lib/hivex.rb
deleted file mode 100644
index a142db1..0000000
--- a/trunk/hivex/ruby/lib/hivex.rb
+++ /dev/null
@@ -1,18 +0,0 @@
-# hivex Ruby bindings
-# Copyright (C) 2009-2011 Red Hat Inc.
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-require '_hivex'
diff --git a/trunk/hivex/ruby/run-ruby-tests b/trunk/hivex/ruby/run-ruby-tests
deleted file mode 100755
index 74afb9f..0000000
--- a/trunk/hivex/ruby/run-ruby-tests
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/sh -
-# hivex Ruby bindings
-# Copyright (C) 2009-2011 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-set -e
-
-export LD_LIBRARY_PATH=../lib/.libs
-
-# Run them one at a time, otherwise rake runs them in parallel (which
-# is bound to fail because they all use a single test image file).
-
-for f in tests/tc_*.rb; do
- echo $RAKE test "$@" TEST="$f"
- $RAKE test "$@" TEST="$f"
-done
diff --git a/trunk/hivex/ruby/tests/tc_010_load.rb b/trunk/hivex/ruby/tests/tc_010_load.rb
deleted file mode 100644
index 113ab69..0000000
--- a/trunk/hivex/ruby/tests/tc_010_load.rb
+++ /dev/null
@@ -1,28 +0,0 @@
-# hivex Ruby bindings -*- ruby -*-
-# Copyright (C) 2009-2011 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-require 'test/unit'
-$:.unshift(File::join(File::dirname(__FILE__), "..", "lib"))
-$:.unshift(File::join(File::dirname(__FILE__), "..", "ext", "hivex"))
-require 'hivex'
-
-class TestLoad < Test::Unit::TestCase
- def test_load
- h = Hivex::open("../images/minimal", {})
- assert_not_nil (h)
- end
-end
diff --git a/trunk/hivex/ruby/tests/tc_021_close.rb b/trunk/hivex/ruby/tests/tc_021_close.rb
deleted file mode 100644
index a089cf3..0000000
--- a/trunk/hivex/ruby/tests/tc_021_close.rb
+++ /dev/null
@@ -1,29 +0,0 @@
-# hivex Ruby bindings -*- ruby -*-
-# Copyright (C) 2009-2011 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-require 'test/unit'
-$:.unshift(File::join(File::dirname(__FILE__), "..", "lib"))
-$:.unshift(File::join(File::dirname(__FILE__), "..", "ext", "hivex"))
-require 'hivex'
-
-class TestClose < Test::Unit::TestCase
- def test_close
- h = Hivex::open("../images/minimal", {})
- assert_not_nil (h)
- h.close()
- end
-end
diff --git a/trunk/hivex/ruby/tests/tc_120_rlenvalue.rb b/trunk/hivex/ruby/tests/tc_120_rlenvalue.rb
deleted file mode 100644
index 368cb19..0000000
--- a/trunk/hivex/ruby/tests/tc_120_rlenvalue.rb
+++ /dev/null
@@ -1,46 +0,0 @@
-# hivex Ruby bindings -*- ruby -*-
-# Copyright (C) 2009-2011 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# Demonstrate value_data_cell_offset by looking at the value data at
-# "\$$$PROTO.HIV\ModerateValueParent\33Bytes", verified to be at file
-# offset 8680 (0x21e8) of the hive rlenvalue_test_hive. The returned
-# length and offset for this value cell should be 37 bytes, position
-# 8712.
-
-require 'test/unit'
-$:.unshift(File::join(File::dirname(__FILE__), "..", "lib"))
-$:.unshift(File::join(File::dirname(__FILE__), "..", "ext", "hivex"))
-require 'hivex'
-
-class TestRLenValue < Test::Unit::TestCase
- def test_RLenValue
- h = Hivex::open("../images/rlenvalue_test_hive", {})
- assert_not_nil(h)
-
- root = h.root()
- assert_not_nil(root)
-
- moderate_value_node = h.node_get_child(root, "ModerateValueParent")
- assert_not_nil(moderate_value_node)
-
- moderate_value_value = h.node_get_value(moderate_value_node, "33Bytes")
-
- r = h.value_data_cell_offset(moderate_value_value)
- assert_equal(r[:len], 37)
- assert_equal(r[:off], 8712)
- end
-end
diff --git a/trunk/hivex/ruby/tests/tc_200_write.rb b/trunk/hivex/ruby/tests/tc_200_write.rb
deleted file mode 100644
index b46dc7b..0000000
--- a/trunk/hivex/ruby/tests/tc_200_write.rb
+++ /dev/null
@@ -1,46 +0,0 @@
-# hivex Ruby bindings -*- ruby -*-
-# Copyright (C) 2009-2011 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-require 'test/unit'
-$:.unshift(File::join(File::dirname(__FILE__), "..", "lib"))
-$:.unshift(File::join(File::dirname(__FILE__), "..", "ext", "hivex"))
-require 'hivex'
-
-class TestWrite < Test::Unit::TestCase
- def test_write
- h = Hivex::open("../images/minimal", {:write => 1})
- assert_not_nil (h)
-
- root = h.root()
- assert (root)
-
- h.node_add_child(root, "A")
- h.node_add_child(root, "B")
- b = h.node_get_child(root, "B")
- assert (b)
-
- values = [
- { :key => "Key1", :type => 3, :value => "ABC" },
- { :key => "Key2", :type => 3, :value => "DEF" }
- ]
- h.node_set_values(b, values)
-
- # Don't actually commit here because that would overwrite
- # the original file.
- # h.commit()
- end
-end
diff --git a/trunk/hivex/ruby/tests/tc_210_setvalue.rb b/trunk/hivex/ruby/tests/tc_210_setvalue.rb
deleted file mode 100644
index e55e5fe..0000000
--- a/trunk/hivex/ruby/tests/tc_210_setvalue.rb
+++ /dev/null
@@ -1,68 +0,0 @@
-# hivex Ruby bindings -*- ruby -*-
-# Copyright (C) 2009-2011 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-require 'test/unit'
-$:.unshift(File::join(File::dirname(__FILE__), "..", "lib"))
-$:.unshift(File::join(File::dirname(__FILE__), "..", "ext", "hivex"))
-require 'hivex'
-
-class TestSetValue < Test::Unit::TestCase
- def test_set_value
- h = Hivex::open("../images/minimal", {:write => 1})
- assert_not_nil (h)
-
- root = h.root()
- assert (root)
-
- h.node_add_child(root, "B")
- b = h.node_get_child(root, "B")
-
- values = [
- { :key => "Key1", :type => 3, :value => "ABC" },
- { :key => "Key2", :type => 2, :value => "DEF" }
- ]
- h.node_set_values(b, values)
-
- value1 = { :key => "Key3", :type => 3, :value => "GHI" }
- h.node_set_value(b, value1)
-
- value2 = { :key => "Key1", :type => 3, :value => "JKL" }
- h.node_set_value(b, value2)
-
- val = h.node_get_value(b, "Key1")
- hash = h.value_value(val)
- assert (hash[:type] == 3)
- assert (hash[:value] == "JKL")
- assert (hash[:len] == 3)
-
- val = h.node_get_value(b, "Key2")
- hash = h.value_value(val)
- assert (hash[:type] == 2)
- assert (hash[:value] == "DEF")
- assert (hash[:len] == 3)
-
- val = h.node_get_value(b, "Key3")
- hash = h.value_value(val)
- assert (hash[:type] == 3)
- assert (hash[:value] == "GHI")
- assert (hash[:len] == 3)
-
- # Don't actually commit here because that would overwrite
- # the original file.
- # h.commit()
- end
-end
diff --git a/trunk/hivex/sh/Makefile.am b/trunk/hivex/sh/Makefile.am
deleted file mode 100644
index a6f5ae6..0000000
--- a/trunk/hivex/sh/Makefile.am
+++ /dev/null
@@ -1,84 +0,0 @@
-# hivex
-# Copyright (C) 2009-2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-EXTRA_DIST = \
- hivexget.pod \
- hivexget \
- hivexsh.pod \
- example1 \
- example2 \
- example3 \
- example4 \
- example5 \
- example6
-
-bin_PROGRAMS = hivexsh
-bin_SCRIPTS = hivexget
-noinst_SCRIPTS = example1 example2 example3 example4 example5 example6
-
-hivexsh_SOURCES = \
- hivexsh.c \
- ../lib/hivex.h \
- ../lib/byte_conversions.h
-
-hivexsh_LDADD = ../lib/libhivex.la ../gnulib/lib/libgnu.la $(LIBREADLINE)
-hivexsh_CFLAGS = \
- -I$(top_srcdir)/gnulib/lib \
- -I$(top_builddir)/gnulib/lib \
- -I$(top_srcdir)/lib \
- -DLOCALEBASEDIR=\""$(datadir)/locale"\" \
- $(WARN_CFLAGS) $(WERROR_CFLAGS)
-
-man_MANS = hivexget.1 hivexsh.1
-
-hivexget.1: hivexget.pod
- $(POD2MAN) \
- --section 1 \
- -c "Windows Registry" \
- --name "hivexget" \
- --release "$(PACKAGE_NAME)-$(PACKAGE_VERSION)" \
- $< > $@-t; mv $@-t $@
-
-hivexsh.1: hivexsh.pod
- $(POD2MAN) \
- --section 1 \
- -c "Windows Registry" \
- --name "hivexsh" \
- --release "$(PACKAGE_NAME)-$(PACKAGE_VERSION)" \
- $< > $@-t; mv $@-t $@
-
-noinst_DATA = \
- $(top_builddir)/html/hivexget.1.html \
- $(top_builddir)/html/hivexsh.1.html
-
-$(top_builddir)/html/hivexget.1.html: hivexget.pod
- mkdir -p $(top_builddir)/html
- cd $(top_builddir) && pod2html \
- --css 'pod.css' \
- --htmldir html \
- --outfile html/hivexget.1.html \
- sh/hivexget.pod
-
-$(top_builddir)/html/hivexsh.1.html: hivexsh.pod
- mkdir -p $(top_builddir)/html
- cd $(top_builddir) && pod2html \
- --css 'pod.css' \
- --htmldir html \
- --outfile html/hivexsh.1.html \
- sh/hivexsh.pod
-
-CLEANFILES = $(man_MANS)
diff --git a/trunk/hivex/sh/example1 b/trunk/hivex/sh/example1
deleted file mode 100755
index a2e1775..0000000
--- a/trunk/hivex/sh/example1
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/bin/bash -
-# Copyright (C) 2009-2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-set -e
-
-# Example program which loads and saves a hive.
-#
-# The intention of this example is just to check that we can do this
-# without corrupting the hive (header etc).
-#
-# NB: The copy of the hive will not be absolutely identical. The
-# sequence numbers in the header will change. If we implement the
-# last modified field in the header, then that and the checksum will
-# also change.
-
-if [ $# -ne 2 ]; then
- echo "$0 input output"
- exit 1
-fi
-
-d=`dirname $0`
-
-$d/hivexsh -w <<EOF
-load $1
-commit $2
-EOF\ No newline at end of file
diff --git a/trunk/hivex/sh/example2 b/trunk/hivex/sh/example2
deleted file mode 100755
index 08a9f40..0000000
--- a/trunk/hivex/sh/example2
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/bash -
-# Copyright (C) 2009-2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-set -e
-
-# Example program which modifies a hive.
-#
-# This program removes any existing (key, value) pairs at the root
-# node and replaces them with some example values.
-#
-# You can load the modified hive using another tool to see the
-# changes. eg. Using Windows regedit, select HKLM and then in the
-# File menu choose "Load Hive ...". Point to the update hive, and
-# then give a key (eg. "test1"). The modified hive will be loaded
-# under HKLM\test1 and the values can be inspected there. After
-# inspecting the changes, unload the hive using File -> Unload Hive.
-#
-# Don't replace the original Windows hive, else you'll break things :-)
-
-if [ $# -ne 0 ]; then
- echo "$0: no arguments required"
- exit 1
-fi
-
-d=`dirname $0`
-
-$d/hivexsh -w <<EOF
-load $d/t/minimal
-setval 1
-@
-string:Root
-commit /tmp/modified
-EOF\ No newline at end of file
diff --git a/trunk/hivex/sh/example3 b/trunk/hivex/sh/example3
deleted file mode 100755
index 134cf19..0000000
--- a/trunk/hivex/sh/example3
+++ /dev/null
@@ -1,53 +0,0 @@
-#!/bin/bash -
-# Copyright (C) 2009-2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-set -e
-
-# Example program which modifies a hive.
-#
-# This program removes any existing (key, value) pairs at the root
-# node and replaces them with some example values.
-#
-# You can load the modified hive using another tool to see the
-# changes. eg. Using Windows regedit, select HKLM and then in the
-# File menu choose "Load Hive ...". Point to the update hive, and
-# then give a key (eg. "test1"). The modified hive will be loaded
-# under HKLM\test1 and the values can be inspected there. After
-# inspecting the changes, unload the hive using File -> Unload Hive.
-#
-# Don't replace the original Windows hive, else you'll break things :-)
-
-if [ $# -ne 0 ]; then
- echo "$0: no arguments required"
- exit 1
-fi
-
-d=`dirname $0`
-
-$d/hivexsh -w <<EOF
-load $d/t/minimal
-setval 4
-@
-string:Root
-A
-string:abcd
-B
-dword:0x12345678
-C
-string:dcbadcbadcbaabcd
-commit /tmp/modified
-EOF\ No newline at end of file
diff --git a/trunk/hivex/sh/example4 b/trunk/hivex/sh/example4
deleted file mode 100755
index 1ce1b6e..0000000
--- a/trunk/hivex/sh/example4
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/bash -
-# Copyright (C) 2009-2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-set -e
-
-# This program deletes the whole \Microsoft tree from a software hive.
-
-if [ $# -ne 2 ]; then
- echo "$0 software software.new"
- exit 1
-fi
-
-d=`dirname $0`
-
-$d/hivexsh -w <<EOF
-load $1
-cd \Microsoft
-del
-commit $2
-EOF\ No newline at end of file
diff --git a/trunk/hivex/sh/example5 b/trunk/hivex/sh/example5
deleted file mode 100755
index b34edea..0000000
--- a/trunk/hivex/sh/example5
+++ /dev/null
@@ -1,54 +0,0 @@
-#!/bin/bash -
-# Copyright (C) 2009-2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-set -e
-
-# This script adds a new node under \Microsoft in an existing software
-# hive.
-
-if [ $# -ne 2 ]; then
- echo "$0 software software.new"
- exit 1
-fi
-
-d=`dirname $0`
-
-$d/hivexsh -w <<EOF
-load $1
-cd \Microsoft
-add TestNode
-cd TestNode
-add Test1
-add Test2
-add Test3
-add Test4
-add Test5
-cd Test1
-setval 2
-@
-string:This is the default key of Test1
-ThisIsTest1
-dword:0x12345678
-cd ..
-cd Test5
-setval 2
-@
-string:This is the default key of Test5
-ThisIsTest5
-dword:0x87654321
-commit $2
-EOF
diff --git a/trunk/hivex/sh/example6 b/trunk/hivex/sh/example6
deleted file mode 100755
index 7cb4467..0000000
--- a/trunk/hivex/sh/example6
+++ /dev/null
@@ -1,126 +0,0 @@
-#!/bin/bash -
-# Copyright (C) 2009-2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-set -e
-
-# Hypothetical viostor installation in a W2K3 system registry.
-
-if [ $# -ne 2 ]; then
- echo "$0 system system.new"
- exit 1
-fi
-
-d=`dirname $0`
-
-$d/hivexsh -w <<EOF
-load $1
-
-cd \ControlSet001\Control\CriticalDeviceDatabase
-
-add pci#ven_1af4&dev_1001&subsys_00000000
-cd pci#ven_1af4&dev_1001&subsys_00000000
-setval 2
-Service
-string:viostor
-ClassGUID
-string:{4D36E97B-E325-11CE-BFC1-08002BE10318}
-cd ..
-
-add pci#ven_1af4&dev_1001&subsys_00020000
-cd pci#ven_1af4&dev_1001&subsys_00020000
-setval 2
-Service
-string:viostor
-ClassGUID
-string:{4D36E97B-E325-11CE-BFC1-08002BE10318}
-cd ..
-
-add pci#ven_1af4&dev_1001&subsys_00021af4
-cd pci#ven_1af4&dev_1001&subsys_00021af4
-setval 2
-Service
-string:viostor
-ClassGUID
-string:{4D36E97B-E325-11CE-BFC1-08002BE10318}
-
-cd \ControlSet001\Services
-add viostor
-cd viostor
-setval 6
-Type
-dword:0x00000001
-Start
-dword:0x00000000
-Group
-string:SCSI miniport
-ErrorControl
-dword:0x00000001
-ImagePath
-string:system32\drivers\viostor.sys
-Tag
-dword:0x00000021
-
-add Parameters
-cd Parameters
-setval 1
-BusType
-dword:0x00000001
-
-add MaxTransferSize
-cd MaxTransferSize
-setval 3
-ParamDesc
-string:Maximum Transfer Size
-type
-string:enum
-default
-string:0
-
-add enum
-cd enum
-setval 3
-0
-string:64 KB
-1
-string:128 KB
-2
-string:256 KB
-cd ..
-
-cd ..
-
-add PnpInterface
-cd PnpInterface
-setval 1
-5
-dword:0x00000001
-cd ..
-
-cd ..
-
-add Enum
-cd Enum
-setval 3
-0
-string:PCI\VEN_1AF4&DEV_1001&SUBSYS_00021AF4&REV_00\3&13c0b0c5&0&20
-Count
-dword:0x00000001
-NextInstance
-dword:0x00000001
-
-commit $2
-EOF
diff --git a/trunk/hivex/sh/hivexget b/trunk/hivex/sh/hivexget
deleted file mode 100755
index be73d62..0000000
--- a/trunk/hivex/sh/hivexget
+++ /dev/null
@@ -1,43 +0,0 @@
-#!/bin/bash -
-# Copyright (C) 2009-2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-set -e
-
-if test $# -lt 2 || test $# -gt 3; then
- echo "hivexget hivefile path [key]"
- exit 1
-fi
-
-if [ $# -eq 2 ]; then
- hivexsh <<EOF
-load $1
-cd $2
-lsval
-exit
-EOF
-else
- key=$3
- if [ "$key" = "" ]; then
- key="@"
- fi
- hivexsh <<EOF
-load $1
-cd $2
-lsval $key
-exit
-EOF
-fi
diff --git a/trunk/hivex/sh/hivexget.pod b/trunk/hivex/sh/hivexget.pod
deleted file mode 100644
index 36ad71c..0000000
--- a/trunk/hivex/sh/hivexget.pod
+++ /dev/null
@@ -1,98 +0,0 @@
-=encoding utf8
-
-=head1 NAME
-
-hivexget - Get subkey from a Windows Registry binary "hive" file
-
-=head1 SYNOPSIS
-
- hivexget hivefile '\Path\To\SubKey'
-
- hivexget hivefile '\Path\To\SubKey' name
-
-=head1 NOTE
-
-This is a low-level tool. For a more convenient way to navigate the
-Windows Registry in Windows virtual machines, see L<virt-win-reg(1)>.
-For proper regedit formatting, use L<hivexregedit(1)>.
-
-=head1 DESCRIPTION
-
-This program navigates through a Windows Registry binary "hive"
-file and extracts I<either> all the (key, value) data pairs
-stored in that subkey I<or> just the single named data item.
-
-In the first form:
-
- hivexget hivefile '\Path\To\SubKey'
-
-C<hivefile> is some Windows Registry binary hive, and C<\Path\To\Subkey>
-is a path within that hive. I<NB> the path is relative to the top
-of this hive, and is I<not> the full path as you would use in Windows
-(eg. C<HKEY_LOCAL_MACHINE\SYSTEM> is not a valid path).
-
-If the subkey exists, then the output lists all data pairs under this
-subkey, in a format similar to C<regedit> in Windows.
-
-In the second form:
-
- hivexget hivefile '\Path\To\SubKey' name
-
-C<hivefile> and path are as above. C<name> is the name of the value
-of interest (use C<@> for the default value).
-
-The corresponding data item is printed "raw" (ie. no processing or
-escaping) except:
-
-=over 4
-
-=item 1
-
-If it's a string we will convert it from Windows UTF-16 to UTF-8, if
-this conversion is possible. The string is printed with a single
-trailing newline.
-
-=item 2
-
-If it's a multiple-string value, each string is printed on a separate
-line.
-
-=item 3
-
-If it's a numeric value, it is printed as a decimal number.
-
-=back
-
-=head1 SEE ALSO
-
-L<hivex(3)>,
-L<hivexml(1)>,
-L<hivexsh(1)>,
-L<hivexregedit(1)>,
-L<virt-win-reg(1)>,
-L<guestfs(3)>,
-L<http://libguestfs.org/>,
-L<virt-cat(1)>,
-L<virt-edit(1)>.
-
-=head1 AUTHORS
-
-Richard W.M. Jones (C<rjones at redhat dot com>)
-
-=head1 COPYRIGHT
-
-Copyright (C) 2009 Red Hat Inc.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along
-with this program; if not, write to the Free Software Foundation, Inc.,
-51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
diff --git a/trunk/hivex/sh/hivexsh.c b/trunk/hivex/sh/hivexsh.c
deleted file mode 100644
index f578ccc..0000000
--- a/trunk/hivex/sh/hivexsh.c
+++ /dev/null
@@ -1,1112 +0,0 @@
-/* hivexsh - Hive shell.
- * Copyright (C) 2009 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <config.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdint.h>
-#include <inttypes.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <assert.h>
-#include <errno.h>
-#include <locale.h>
-
-#ifdef HAVE_LIBINTL_H
-#include <libintl.h>
-#endif
-
-#ifdef HAVE_LIBREADLINE
-#include <readline/readline.h>
-#include <readline/history.h>
-#endif
-
-#ifdef HAVE_GETTEXT
-#include "gettext.h"
-#define _(str) dgettext(PACKAGE, (str))
-//#define N_(str) dgettext(PACKAGE, (str))
-#else
-#define _(str) str
-//#define N_(str) str
-#endif
-
-#define STREQ(a,b) (strcmp((a),(b)) == 0)
-#define STRCASEEQ(a,b) (strcasecmp((a),(b)) == 0)
-#define STRNEQ(a,b) (strcmp((a),(b)) != 0)
-//#define STRCASENEQ(a,b) (strcasecmp((a),(b)) != 0)
-//#define STREQLEN(a,b,n) (strncmp((a),(b),(n)) == 0)
-//#define STRCASEEQLEN(a,b,n) (strncasecmp((a),(b),(n)) == 0)
-//#define STRNEQLEN(a,b,n) (strncmp((a),(b),(n)) != 0)
-//#define STRCASENEQLEN(a,b,n) (strncasecmp((a),(b),(n)) != 0)
-#define STRPREFIX(a,b) (strncmp((a),(b),strlen((b))) == 0)
-
-#include "c-ctype.h"
-#include "xstrtol.h"
-
-#include "hivex.h"
-#include "byte_conversions.h"
-
-#define HIVEX_MAX_VALUES 1000
-
-static int quit = 0;
-static int is_tty;
-static hive_h *h = NULL;
-static char *prompt_string = NULL; /* Normal prompt string. */
-static char *loaded = NULL; /* Basename of loaded file, if any. */
-static hive_node_h cwd; /* Current node. */
-static int open_flags = 0; /* Flags used when loading a hive file. */
-
-static void usage (void) __attribute__((noreturn));
-static void print_node_path (hive_node_h, FILE *);
-static void set_prompt_string (void);
-static void initialize_readline (void);
-static void cleanup_readline (void);
-static void add_history_line (const char *);
-static char *rl_gets (const char *prompt_string);
-static void sort_strings (char **strings, int len);
-static int get_xdigit (char c);
-static int dispatch (char *cmd, char *args);
-static int cmd_add (char *name);
-static int cmd_cd (char *path);
-static int cmd_close (char *path);
-static int cmd_commit (char *path);
-static int cmd_del (char *args);
-static int cmd_help (char *args);
-static int cmd_load (char *hivefile);
-static int cmd_ls (char *args);
-static int cmd_lsval (char *args);
-static int cmd_setval (char *args);
-
-static void
-usage (void)
-{
- fprintf (stderr, "hivexsh [-dfw] [hivefile]\n");
- exit (EXIT_FAILURE);
-}
-
-int
-main (int argc, char *argv[])
-{
- setlocale (LC_ALL, "");
-#ifdef HAVE_BINDTEXTDOMAIN
- bindtextdomain (PACKAGE, LOCALEBASEDIR);
- textdomain (PACKAGE);
-#endif
-
- int c;
- const char *filename = NULL;
-
- set_prompt_string ();
-
- while ((c = getopt (argc, argv, "df:w")) != EOF) {
- switch (c) {
- case 'd':
- open_flags |= HIVEX_OPEN_DEBUG;
- break;
- case 'f':
- filename = optarg;
- break;
- case 'w':
- open_flags |= HIVEX_OPEN_WRITE;
- break;
- default:
- usage ();
- }
- }
-
- if (optind < argc) {
- if (optind + 1 != argc)
- usage ();
- if (cmd_load (argv[optind]) == -1)
- exit (EXIT_FAILURE);
- }
-
- /* -f filename parameter */
- if (filename) {
- close (0);
- if (open (filename, O_RDONLY) == -1) {
- perror (filename);
- exit (EXIT_FAILURE);
- }
- }
-
- /* Main loop. */
- is_tty = isatty (0);
- initialize_readline ();
-
- if (is_tty)
- printf (_(
-"\n"
-"Welcome to hivexsh, the hivex interactive shell for examining\n"
-"Windows Registry binary hive files.\n"
-"\n"
-"Type: 'help' for help summary\n"
-" 'quit' to quit the shell\n"
-"\n"));
-
- while (!quit) {
- char *buf = rl_gets (prompt_string);
- if (!buf) {
- quit = 1;
- if (is_tty)
- printf ("\n");
- break;
- }
-
- while (*buf && c_isspace (*buf))
- buf++;
-
- /* Ignore blank line. */
- if (!*buf) continue;
-
- /* If the next character is '#' then this is a comment. */
- if (*buf == '#') continue;
-
- /* Parsing is very simple - much simpler than guestfish. This is
- * because Registry keys often contain spaces, and we don't want
- * to bother with quoting. Therefore here we just split at the
- * first whitespace into "cmd<whitespace>arg(s)". We let the
- * command decide how to deal with arg(s), if at all.
- */
- size_t len = strcspn (buf, " \t");
-
- if (len == 0) continue;
-
- char *cmd = buf;
- char *args;
-
- if (buf[len] == '\0') {
- /* This is mostly safe. Although the cmd_* functions do sometimes
- * modify args, then shouldn't do so when args is "".
- */
- args = (char *) "";
- goto got_command;
- }
-
- buf[len] = '\0';
- args = buf + len + 1 + strspn (&buf[len+1], " \t");
-
- len = strlen (args);
- while (len > 0 && c_isspace (args[len-1])) {
- args[len-1] = '\0';
- len--;
- }
-
- got_command:
- /*printf ("command: '%s' args: '%s'\n", cmd, args)*/;
- int r = dispatch (cmd, args);
- if (!is_tty && r == -1)
- exit (EXIT_FAILURE);
- }
-
- cleanup_readline ();
- free (prompt_string);
- free (loaded);
- if (h) hivex_close (h);
- exit (0);
-}
-
-/* Set the prompt string. This is called whenever it could change, eg.
- * after loading a file or changing directory.
- */
-static void
-set_prompt_string (void)
-{
- free (prompt_string);
- prompt_string = NULL;
-
- FILE *fp;
- char *ptr;
- size_t size;
- fp = open_memstream (&ptr, &size);
- if (fp == NULL) {
- perror ("open_memstream");
- exit (EXIT_FAILURE);
- }
-
- if (h) {
- assert (loaded != NULL);
- assert (cwd != 0);
-
- fputs (loaded, fp);
- print_node_path (cwd, fp);
- }
-
- fprintf (fp, "> ");
- fclose (fp);
- prompt_string = ptr;
-}
-
-/* Print the \full\path of a node. */
-static void
-print_node_path (hive_node_h node, FILE *fp)
-{
- hive_node_h root = hivex_root (h);
-
- if (node == root) {
- fputc ('\\', fp);
- return;
- }
-
- hive_node_h parent = hivex_node_parent (h, node);
- if (parent == 0) {
- fprintf (stderr, _("hivexsh: error getting parent of node %zu\n"), node);
- return;
- }
- print_node_path (parent, fp);
-
- if (parent != root)
- fputc ('\\', fp);
-
- char *name = hivex_node_name (h, node);
- if (name == NULL) {
- fprintf (stderr, _("hivexsh: error getting node name of node %zx\n"), node);
- return;
- }
-
- fputs (name, fp);
- free (name);
-}
-
-static char *line_read = NULL;
-
-static char *
-rl_gets (const char *prompt_string)
-{
-#ifdef HAVE_LIBREADLINE
-
- if (is_tty) {
- if (line_read) {
- free (line_read);
- line_read = NULL;
- }
-
- line_read = readline (prompt_string);
-
- if (line_read && *line_read)
- add_history_line (line_read);
-
- return line_read;
- }
-
-#endif /* HAVE_LIBREADLINE */
-
- static char buf[8192];
- int len;
-
- if (is_tty)
- printf ("%s", prompt_string);
- line_read = fgets (buf, sizeof buf, stdin);
-
- if (line_read) {
- len = strlen (line_read);
- if (len > 0 && buf[len-1] == '\n') buf[len-1] = '\0';
- }
-
- return line_read;
-}
-
-#ifdef HAVE_LIBREADLINE
-static char histfile[1024];
-static int nr_history_lines = 0;
-#endif
-
-static void
-initialize_readline (void)
-{
-#ifdef HAVE_LIBREADLINE
- const char *home;
-
- home = getenv ("HOME");
- if (home) {
- snprintf (histfile, sizeof histfile, "%s/.hivexsh", home);
- using_history ();
- (void) read_history (histfile);
- }
-
- rl_readline_name = "hivexsh";
-#endif
-}
-
-static void
-cleanup_readline (void)
-{
-#ifdef HAVE_LIBREADLINE
- int fd;
-
- if (histfile[0] != '\0') {
- fd = open (histfile, O_WRONLY|O_CREAT, 0644);
- if (fd == -1) {
- perror (histfile);
- return;
- }
- close (fd);
-
- (void) append_history (nr_history_lines, histfile);
- }
-#endif
-}
-
-static void
-add_history_line (const char *line)
-{
-#ifdef HAVE_LIBREADLINE
- add_history (line);
- nr_history_lines++;
-#endif
-}
-
-static int
-compare (const void *vp1, const void *vp2)
-{
- char * const *p1 = (char * const *) vp1;
- char * const *p2 = (char * const *) vp2;
- return strcasecmp (*p1, *p2);
-}
-
-static void
-sort_strings (char **strings, int len)
-{
- qsort (strings, len, sizeof (char *), compare);
-}
-
-static int
-get_xdigit (char c)
-{
- switch (c) {
- case '0'...'9': return c - '0';
- case 'a'...'f': return c - 'a' + 10;
- case 'A'...'F': return c - 'A' + 10;
- default: return -1;
- }
-}
-
-static int
-dispatch (char *cmd, char *args)
-{
- if (STRCASEEQ (cmd, "help"))
- return cmd_help (args);
- else if (STRCASEEQ (cmd, "load"))
- return cmd_load (args);
- else if (STRCASEEQ (cmd, "exit") ||
- STRCASEEQ (cmd, "q") ||
- STRCASEEQ (cmd, "quit")) {
- quit = 1;
- return 0;
- }
-
- /* If no hive file is loaded (!h) then only the small selection of
- * commands above will work.
- */
- if (!h) {
- fprintf (stderr, _("hivexsh: you must load a hive file first using 'load hivefile'\n"));
- return -1;
- }
-
- if (STRCASEEQ (cmd, "add"))
- return cmd_add (args);
- else if (STRCASEEQ (cmd, "cd"))
- return cmd_cd (args);
- else if (STRCASEEQ (cmd, "close") || STRCASEEQ (cmd, "unload"))
- return cmd_close (args);
- else if (STRCASEEQ (cmd, "commit"))
- return cmd_commit (args);
- else if (STRCASEEQ (cmd, "del"))
- return cmd_del (args);
- else if (STRCASEEQ (cmd, "ls"))
- return cmd_ls (args);
- else if (STRCASEEQ (cmd, "lsval"))
- return cmd_lsval (args);
- else if (STRCASEEQ (cmd, "setval"))
- return cmd_setval (args);
- else {
- fprintf (stderr, _("hivexsh: unknown command '%s', use 'help' for help summary\n"),
- cmd);
- return -1;
- }
-}
-
-static int
-cmd_load (char *hivefile)
-{
- if (STREQ (hivefile, "")) {
- fprintf (stderr, _("hivexsh: load: no hive file name given to load\n"));
- return -1;
- }
-
- if (h) hivex_close (h);
- h = NULL;
-
- free (loaded);
- loaded = NULL;
-
- cwd = 0;
-
- h = hivex_open (hivefile, open_flags);
- if (h == NULL) {
- fprintf (stderr,
- _(
-"hivexsh: failed to open hive file: %s: %m\n"
-"\n"
-"If you think this file is a valid Windows binary hive file (_not_\n"
-"a regedit *.reg file) then please run this command again using the\n"
-"hivexsh option '-d' and attach the complete output _and_ the hive file\n"
-"which fails into a bug report at https://bugzilla.redhat.com/\n"
-"\n"),
- hivefile);
- return -1;
- }
-
- /* Get the basename of the file for the prompt. */
- char *p = strrchr (hivefile, '/');
- if (p)
- loaded = strdup (p+1);
- else
- loaded = strdup (hivefile);
- if (!loaded) {
- perror ("strdup");
- exit (EXIT_FAILURE);
- }
-
- cwd = hivex_root (h);
-
- set_prompt_string ();
-
- return 0;
-}
-
-static int
-cmd_close (char *args)
-{
- if (STRNEQ (args, "")) {
- fprintf (stderr, _("hivexsh: '%s' command should not be given arguments\n"),
- "close");
- return -1;
- }
-
- if (h) hivex_close (h);
- h = NULL;
-
- free (loaded);
- loaded = NULL;
-
- cwd = 0;
-
- set_prompt_string ();
-
- return 0;
-}
-
-static int
-cmd_commit (char *path)
-{
- if (STREQ (path, ""))
- path = NULL;
-
- if (hivex_commit (h, path, 0) == -1) {
- perror ("hivexsh: commit");
- return -1;
- }
-
- return 0;
-}
-
-static int
-cmd_cd (char *path)
-{
- if (STREQ (path, "")) {
- print_node_path (cwd, stdout);
- fputc ('\n', stdout);
- return 0;
- }
-
- if (path[0] == '\\' && path[1] == '\\') {
- fprintf (stderr, _("%s: %s: \\ characters in path are doubled - are you escaping the path parameter correctly?\n"), "hivexsh", path);
- return -1;
- }
-
- hive_node_h new_cwd = cwd;
- hive_node_h root = hivex_root (h);
-
- if (path[0] == '\\') {
- new_cwd = root;
- path++;
- }
-
- while (path[0]) {
- size_t len = strcspn (path, "\\");
- if (len == 0) {
- path++;
- continue;
- }
-
- char *elem = path;
- path = path[len] == '\0' ? &path[len] : &path[len+1];
- elem[len] = '\0';
-
- if (len == 1 && STREQ (elem, "."))
- continue;
-
- if (len == 2 && STREQ (elem, "..")) {
- if (new_cwd != root)
- new_cwd = hivex_node_parent (h, new_cwd);
- continue;
- }
-
- errno = 0;
- new_cwd = hivex_node_get_child (h, new_cwd, elem);
- if (new_cwd == 0) {
- if (errno)
- perror ("hivexsh: cd");
- else
- fprintf (stderr, _("hivexsh: cd: subkey '%s' not found\n"),
- elem);
- return -1;
- }
- }
-
- if (new_cwd != cwd) {
- cwd = new_cwd;
- set_prompt_string ();
- }
-
- return 0;
-}
-
-static int
-cmd_help (char *args)
-{
- printf (_(
-"Navigate through the hive's keys using the 'cd' command, as if it\n"
-"contained a filesystem, and use 'ls' to list the subkeys of the\n"
-"current key. Full documentation is in the hivexsh(1) manual page.\n"));
-
- return 0;
-}
-
-static int
-cmd_ls (char *args)
-{
- if (STRNEQ (args, "")) {
- fprintf (stderr, _("hivexsh: '%s' command should not be given arguments\n"),
- "ls");
- return -1;
- }
-
- /* Get the subkeys. */
- hive_node_h *children = hivex_node_children (h, cwd);
- if (children == NULL) {
- perror ("ls");
- return -1;
- }
-
- /* Get names for each subkey. */
- size_t len;
- for (len = 0; children[len] != 0; ++len)
- ;
-
- char **names = calloc (len, sizeof (char *));
- if (names == NULL) {
- perror ("malloc");
- exit (EXIT_FAILURE);
- }
-
- int ret = -1;
- size_t i;
- for (i = 0; i < len; ++i) {
- names[i] = hivex_node_name (h, children[i]);
- if (names[i] == NULL) {
- perror ("hivex_node_name");
- goto error;
- }
- }
-
- /* Sort the names. */
- sort_strings (names, len);
-
- for (i = 0; i < len; ++i)
- printf ("%s\n", names[i]);
-
- ret = 0;
- error:
- free (children);
- for (i = 0; i < len; ++i)
- free (names[i]);
- free (names);
- return ret;
-}
-
-static int
-cmd_lsval (char *key)
-{
- if (STRNEQ (key, "")) {
- hive_value_h value;
-
- errno = 0;
- if (STREQ (key, "@")) /* default key written as "@" */
- value = hivex_node_get_value (h, cwd, "");
- else
- value = hivex_node_get_value (h, cwd, key);
-
- if (value == 0) {
- if (errno)
- goto error;
- /* else key not found */
- fprintf (stderr, _("%s: %s: key not found\n"), "hivexsh", key);
- return -1;
- }
-
- /* Print the value. */
- hive_type t;
- size_t len;
- if (hivex_value_type (h, value, &t, &len) == -1)
- goto error;
-
- switch (t) {
- case hive_t_string:
- case hive_t_expand_string:
- case hive_t_link: {
- char *str = hivex_value_string (h, value);
- if (!str)
- goto error;
-
- puts (str); /* note: this adds a single \n character */
- free (str);
- break;
- }
-
- case hive_t_dword:
- case hive_t_dword_be: {
- int32_t j = hivex_value_dword (h, value);
- printf ("%" PRIi32 "\n", j);
- break;
- }
-
- case hive_t_qword: {
- int64_t j = hivex_value_qword (h, value);
- printf ("%" PRIi64 "\n", j);
- break;
- }
-
- case hive_t_multiple_strings: {
- char **strs = hivex_value_multiple_strings (h, value);
- if (!strs)
- goto error;
- size_t j;
- for (j = 0; strs[j] != NULL; ++j) {
- puts (strs[j]);
- free (strs[j]);
- }
- free (strs);
- break;
- }
-
- case hive_t_none:
- case hive_t_binary:
- case hive_t_resource_list:
- case hive_t_full_resource_description:
- case hive_t_resource_requirements_list:
- default: {
- size_t r;
- char *data;
-
- data = hivex_value_value (h, value, &t, &len);
- if (!data)
- goto error;
-
- r = fwrite (data, 1, len, stdout);
- free (data);
- if (r != len)
- goto error;
-
- break;
- }
- } /* switch */
- } else {
- /* No key specified, so print all keys in this node. We do this
- * in a format which looks like the output of regedit, although
- * this isn't a particularly useful format.
- */
- hive_value_h *values;
-
- values = hivex_node_values (h, cwd);
- if (values == NULL)
- goto error;
-
- size_t i;
- for (i = 0; values[i] != 0; ++i) {
- char *key = hivex_value_key (h, values[i]);
- if (!key) goto error;
-
- if (*key) {
- putchar ('"');
- size_t j;
- for (j = 0; key[j] != 0; ++j) {
- if (key[j] == '"' || key[j] == '\\')
- putchar ('\\');
- putchar (key[j]);
- }
- putchar ('"');
- } else
- printf ("\"@\""); /* default key in regedit files */
- putchar ('=');
- free (key);
-
- hive_type t;
- size_t len;
- if (hivex_value_type (h, values[i], &t, &len) == -1)
- goto error;
-
- switch (t) {
- case hive_t_string:
- case hive_t_expand_string:
- case hive_t_link: {
- char *str = hivex_value_string (h, values[i]);
- if (!str)
- goto error;
-
- if (t != hive_t_string)
- printf ("str(%d):", t);
- putchar ('"');
- size_t j;
- for (j = 0; str[j] != 0; ++j) {
- if (str[j] == '"' || str[j] == '\\')
- putchar ('\\');
- putchar (str[j]);
- }
- putchar ('"');
- free (str);
- break;
- }
-
- case hive_t_dword:
- case hive_t_dword_be: {
- int32_t j = hivex_value_dword (h, values[i]);
- printf ("dword:%08" PRIx32, j);
- break;
- }
-
- case hive_t_qword: /* sic */
- case hive_t_none:
- case hive_t_binary:
- case hive_t_multiple_strings:
- case hive_t_resource_list:
- case hive_t_full_resource_description:
- case hive_t_resource_requirements_list:
- default: {
- unsigned char *data =
- (unsigned char *) hivex_value_value (h, values[i], &t, &len);
- if (!data)
- goto error;
-
- printf ("hex(%d):", t);
- size_t j;
- for (j = 0; j < len; ++j) {
- if (j > 0)
- putchar (',');
- printf ("%02x", data[j]);
- }
-
- free (data);
-
- break;
- }
- } /* switch */
-
- putchar ('\n');
- } /* for */
-
- free (values);
- }
-
- return 0;
-
- error:
- perror ("hivexsh: lsval");
- return -1;
-}
-
-static int
-cmd_setval (char *nrvals_str)
-{
- strtol_error xerr;
-
- /* Parse number of values. */
- long nrvals;
- xerr = xstrtol (nrvals_str, NULL, 0, &nrvals, "");
- if (xerr != LONGINT_OK) {
- fprintf (stderr, _("%s: %s: invalid integer parameter (%s returned %d)\n"),
- "setval", "nrvals", "xstrtol", xerr);
- return -1;
- }
- if (nrvals < 0 || nrvals > HIVEX_MAX_VALUES) {
- fprintf (stderr, _("%s: %s: integer out of range\n"),
- "setval", "nrvals");
- return -1;
- }
-
- struct hive_set_value *values =
- calloc (nrvals, sizeof (struct hive_set_value));
- if (values == NULL) {
- perror ("calloc");
- exit (EXIT_FAILURE);
- }
-
- int ret = -1;
-
- /* Read nrvals * 2 lines of input, nrvals * (key, value) pairs, as
- * explained in the man page.
- */
- int i, j;
- for (i = 0; i < nrvals; ++i) {
- /* Read key. */
- char *buf = rl_gets (" key> ");
- if (!buf) {
- fprintf (stderr, _("hivexsh: setval: unexpected end of input\n"));
- quit = 1;
- goto error;
- }
-
- /* Note that buf will be overwritten by the next call to rl_gets. */
- if (STREQ (buf, "@"))
- values[i].key = strdup ("");
- else
- values[i].key = strdup (buf);
- if (values[i].key == NULL) {
- perror ("strdup");
- exit (EXIT_FAILURE);
- }
-
- /* Read value. */
- buf = rl_gets ("value> ");
- if (!buf) {
- fprintf (stderr, _("hivexsh: setval: unexpected end of input\n"));
- quit = 1;
- goto error;
- }
-
- if (STREQ (buf, "none")) {
- values[i].t = hive_t_none;
- values[i].len = 0;
- }
- else if (STRPREFIX (buf, "string:")) {
- buf += 7;
- values[i].t = hive_t_string;
- int nr_chars = strlen (buf);
- values[i].len = 2 * (nr_chars + 1);
- values[i].value = malloc (values[i].len);
- if (!values[i].value) {
- perror ("malloc");
- exit (EXIT_FAILURE);
- }
- for (j = 0; j <= /* sic */ nr_chars; ++j) {
- if (buf[j] & 0x80) {
- fprintf (stderr, _("hivexsh: string(utf16le): only 7 bit ASCII strings are supported for input\n"));
- goto error;
- }
- values[i].value[2*j] = buf[j];
- values[i].value[2*j+1] = '\0';
- }
- }
- else if (STRPREFIX (buf, "expandstring:")) {
- buf += 13;
- values[i].t = hive_t_expand_string;
- int nr_chars = strlen (buf);
- values[i].len = 2 * (nr_chars + 1);
- values[i].value = malloc (values[i].len);
- if (!values[i].value) {
- perror ("malloc");
- exit (EXIT_FAILURE);
- }
- for (j = 0; j <= /* sic */ nr_chars; ++j) {
- if (buf[j] & 0x80) {
- fprintf (stderr, _("hivexsh: string(utf16le): only 7 bit ASCII strings are supported for input\n"));
- goto error;
- }
- values[i].value[2*j] = buf[j];
- values[i].value[2*j+1] = '\0';
- }
- }
- else if (STRPREFIX (buf, "dword:")) {
- buf += 6;
- values[i].t = hive_t_dword;
- values[i].len = 4;
- values[i].value = malloc (4);
- if (!values[i].value) {
- perror ("malloc");
- exit (EXIT_FAILURE);
- }
- long n;
- xerr = xstrtol (buf, NULL, 0, &n, "");
- if (xerr != LONGINT_OK) {
- fprintf (stderr, _("%s: %s: invalid integer parameter (%s returned %d)\n"),
- "setval", "dword", "xstrtol", xerr);
- goto error;
- }
-#if SIZEOF_LONG > 4
- if (n < 0 || n > UINT32_MAX) {
- fprintf (stderr, _("%s: %s: integer out of range\n"),
- "setval", "dword");
- goto error;
- }
-#endif
- uint32_t u32 = htole32 (n);
- memcpy (values[i].value, &u32, 4);
- }
- else if (STRPREFIX (buf, "qword:")) {
- buf += 6;
- values[i].t = hive_t_qword;
- values[i].len = 8;
- values[i].value = malloc (8);
- if (!values[i].value) {
- perror ("malloc");
- exit (EXIT_FAILURE);
- }
- long long n;
- xerr = xstrtoll (buf, NULL, 0, &n, "");
- if (xerr != LONGINT_OK) {
- fprintf (stderr, _("%s: %s: invalid integer parameter (%s returned %d)\n"),
- "setval", "dword", "xstrtoll", xerr);
- goto error;
- }
-#if 0
- if (n < 0 || n > UINT64_MAX) {
- fprintf (stderr, _("%s: %s: integer out of range\n"),
- "setval", "dword");
- goto error;
- }
-#endif
- uint64_t u64 = htole64 (n);
- memcpy (values[i].value, &u64, 4);
- }
- else if (STRPREFIX (buf, "hex:")) {
- /* Read the type. */
- buf += 4;
- size_t len = strcspn (buf, ":");
- char *nextbuf;
- if (buf[len] == '\0') /* "hex:t" */
- nextbuf = &buf[len];
- else { /* "hex:t:..." */
- buf[len] = '\0';
- nextbuf = &buf[len+1];
- }
-
- long t;
- xerr = xstrtol (buf, NULL, 0, &t, "");
- if (xerr != LONGINT_OK) {
- fprintf (stderr, _("%s: %s: invalid integer parameter (%s returned %d)\n"),
- "setval", "hex", "xstrtol", xerr);
- goto error;
- }
-#if SIZEOF_LONG > 4
- if (t < 0 || t > UINT32_MAX) {
- fprintf (stderr, _("%s: %s: integer out of range\n"),
- "setval", "hex");
- goto error;
- }
-#endif
- values[i].t = t;
-
- /* Read the hex data. */
- buf = nextbuf;
-
- /* The allocation length is an overestimate, but it doesn't matter. */
- values[i].value = malloc (1 + strlen (buf) / 2);
- if (!values[i].value) {
- perror ("malloc");
- exit (EXIT_FAILURE);
- }
- values[i].len = 0;
-
- while (*buf) {
- int c = 0;
-
- for (j = 0; *buf && j < 2; buf++) {
- if (c_isxdigit (*buf)) { /* NB: ignore non-hex digits. */
- c <<= 4;
- c |= get_xdigit (*buf);
- j++;
- }
- }
-
- if (j == 2) values[i].value[values[i].len++] = c;
- else if (j == 1) {
- fprintf (stderr, _("hivexsh: setval: trailing garbage after hex string\n"));
- goto error;
- }
- }
- }
- else {
- fprintf (stderr,
- _("hivexsh: setval: cannot parse value string, please refer to the man page hivexsh(1) for help: %s\n"),
- buf);
- goto error;
- }
- }
-
- ret = hivex_node_set_values (h, cwd, nrvals, values, 0);
-
- error:
- /* Free values array. */
- for (i = 0; i < nrvals; ++i) {
- free (values[i].key);
- free (values[i].value);
- }
- free (values);
-
- return ret;
-}
-
-static int
-cmd_del (char *args)
-{
- if (STRNEQ (args, "")) {
- fprintf (stderr, _("hivexsh: '%s' command should not be given arguments\n"),
- "del");
- return -1;
- }
-
- if (cwd == hivex_root (h)) {
- fprintf (stderr, _("hivexsh: del: the root node cannot be deleted\n"));
- return -1;
- }
-
- hive_node_h new_cwd = hivex_node_parent (h, cwd);
-
- if (hivex_node_delete_child (h, cwd) == -1) {
- perror ("hivexsh: del");
- return -1;
- }
-
- cwd = new_cwd;
- set_prompt_string ();
- return 0;
-}
-
-static int
-cmd_add (char *name)
-{
- hive_node_h node = hivex_node_add_child (h, cwd, name);
- if (node == 0) {
- perror ("hivexsh: add");
- return -1;
- }
- return 0;
-}
diff --git a/trunk/hivex/sh/hivexsh.pod b/trunk/hivex/sh/hivexsh.pod
deleted file mode 100644
index 7d7fc0a..0000000
--- a/trunk/hivex/sh/hivexsh.pod
+++ /dev/null
@@ -1,287 +0,0 @@
-=encoding utf8
-
-=head1 NAME
-
-hivexsh - Windows Registry hive shell
-
-=head1 SYNOPSIS
-
- hivexsh [-options] [hivefile]
-
-=head1 DESCRIPTION
-
-This program provides a simple shell for navigating Windows Registry
-'hive' files. It uses the hivex library for access to these binary
-files.
-
-Firstly you will need to provide a hive file from a Windows operating
-system. The hive files are usually located in
-C<C:\Windows\System32\Config> and have names like C<software>,
-C<system> etc (without any file extension). For more information
-about hive files, read L<hivex(3)>. For information about downloading
-files from virtual machines, read L<virt-cat(1)> and L<guestfish(1)>.
-
-You can provide the name of the hive file to examine on the command
-line. For example:
-
- hivexsh software
-
-Or you can start C<hivexsh> without any arguments, and immediately use
-the C<load> command to load a hive:
-
- $ hivexsh
-
- Welcome to hivexsh, the hivex interactive shell for examining
- Windows Registry binary hive files.
-
- Type: 'help' for help with commands
- 'quit' to quit the shell
-
- > load software
- software\>
-
-Navigate through the hive's keys using the C<cd> command, as if it
-contained a filesystem, and use C<ls> to list the subkeys of the
-current key. Other commands are listed below.
-
-=head1 OPTIONS
-
-=over 4
-
-=item B<-d>
-
-Enable lots of debug messages. If you find a Registry file that this
-program cannot parse, please enable this option and post the complete
-output I<and> the Registry hive file in your bug report.
-
-=item B<-f> filename
-
-Read commands from C<filename> instead of stdin. To write a hivexsh
-script, use:
-
- #!/usr/bin/hivexsh -f
-
-=item B<-w>
-
-If this option is given, then writes are allowed to the hive
-(see L</commit> command below, and the discussion of
-modifying hives in L<hivex(3)/WRITING TO HIVE FILES>).
-
-B<Important Note:> Even if you specify this option, nothing is written
-to a hive unless you call the L</commit> command. If you exit the
-shell without committing, all changes will be discarded.
-
-If this option is not given, then write commands are disabled.
-
-=back
-
-=head1 COMMANDS
-
-=over 4
-
-=item B<add> name
-
-Add a subkey named C<name> below the current node. The name may
-contain spaces and punctuation characters, and does not need to be
-quoted.
-
-The new key will have no subkeys and no values (see C<setval>).
-
-There must be no existing subkey called C<name>, or this command will
-fail. To replace an existing subkey, delete it first like this:
-
- cd name
- del
-
-=item B<cd> path
-
-Change to the subkey C<path>. Use Windows-style backslashes to
-separate path elements, and start with a backslash in order to start
-from the root of the hive. For example:
-
- cd \Classes\*
-
-moves from the root node, to the C<Classes> node, to the C<*> node.
-If you were already at the root node, you could do this instead:
-
- cd Classes\*
-
-or even:
-
- cd Classes
- cd *
-
-Path elements (node names) are matched case insensitively, and
-characters like space, C<*>, and C<?> have I<no> special significance.
-
-C<cd ..> may be used to go to the parent directory.
-
-C<cd> without any arguments prints the current path.
-
-Be careful with C<cd \> since the readline library has an undocumented
-behaviour where it will think the final backslash is a continuation
-(it reads the next line of input and appends it). Put a single space
-after the backslash.
-
-=item B<close> | B<unload>
-
-Close the currently loaded hive.
-
-If you modified the hive, all uncommitted writes are lost when you
-call this command (or if the shell exits). You have to call C<commit>
-to write changes.
-
-=item B<commit> [newfile]
-
-Commit changes to the hive. If the optional C<newfile> parameter is
-supplied, then the hive is written to that file, else the original
-file is overwritten.
-
-Note that you have to specify the C<-w> flag, otherwise no writes are
-allowed.
-
-=item B<del>
-
-Delete the current node and everything beneath it. The current
-directory is moved up one level (as if you did C<cd ..>) after
-this command.
-
-You cannot delete the root node.
-
-=item B<exit> | B<quit>
-
-Exit the shell.
-
-=item B<load> hivefile
-
-Load the binary hive named C<hivefile>. The currently loaded hive, if
-any, is closed. The current directory is changed back to the root
-node.
-
-=item B<ls>
-
-List the subkeys of the current hive Registry key. Note this command
-does not take any arguments.
-
-=item B<lsval> [key]
-
-List the (key, value) pairs of the current hive Registry key. If no
-argument is given then all pairs are displayed. If C<key> is given,
-then the value of the named key is displayed. If C<@> is given, then
-the value of the default key is displayed.
-
-=item B<setval> nrvals
-
-This command replaces all (key, value) pairs at the current node with
-the values in subsequent input. C<nrvals> is the number of values
-(ie. (key, value) pairs), and any existing values at this node are
-deleted. So C<setval 0> just deletes any values at the current node.
-
-The command reads 2 * nrvals lines of input, with each pair of
-lines of input corresponding to a key and a value to add.
-
-For example, the following setval command replaces whatever is at the
-current node with two (key, value) pairs. The default key is set to
-the UTF16-LE-encoded string "abcd". The other value is named
-"ANumber" and is a little-endian DWORD 0x12345678.
-
- setval 2
- @
- string:abcd
- ANumber
- dword:12345678
-
-The first line of each pair is the key (the special key C<@> means
-the default key, but you can also use a blank line).
-
-The second line of each pair is the value, which has a special format
-C<type:value> with possible types summarized in the table below:
-
- none No data is stored, and the type is set to 0.
-
- string:abc "abc" is stored as a UTF16-LE-encoded
- string (type 1). Note that only 7 bit
- ASCII strings are supported as input.
-
- expandstring:... Same as string but with type 2.
-
- dword:0x01234567 A DWORD (type 4) with the hex value
- 0x01234567. You can also use decimal
- or octal numbers here.
-
- qword:0x0123456789abcdef
- A QWORD (type 11) with the hex value
- 0x0123456789abcdef. You can also use
- decimal or octal numbers here.
-
- hex:<type>:<hexbytes>
- hex:1:41,00,42,00,43,00,44,00,00,00
- This is the generic way to enter any
- value. <type> is the integer value type.
- <hexbytes> is a list of pairs of hex
- digits which are treated as bytes.
- (Any non-hex-digits here are ignored,
- so you can separate bytes with commas
- or spaces if you want).
-
-=back
-
-=head1 EXAMPLE
-
- $ guestfish --ro -i Windows7
- ><fs> download win:c:\windows\system32\config\software software
- ><fs> quit
-
- $ hivexsh software
-
- Welcome to hivexsh, the hivex interactive shell for examining
- Windows Registry binary hive files.
-
- Type: 'help' for help with commands
- 'quit' to quit the shell
-
- software\> ls
- ATI Technologies
- Classes
- Clients
- Intel
- Microsoft
- ODBC
- Policies
- RegisteredApplications
- Sonic
- Wow6432Node
- software\> quit
-
-=head1 SEE ALSO
-
-L<hivex(3)>,
-L<hivexget(1)>,
-L<hivexml(1)>,
-L<virt-win-reg(1)>,
-L<guestfs(3)>,
-L<http://libguestfs.org/>,
-L<virt-cat(1)>,
-L<virt-edit(1)>.
-
-=head1 AUTHORS
-
-Richard W.M. Jones (C<rjones at redhat dot com>)
-
-=head1 COPYRIGHT
-
-Copyright (C) 2009-2010 Red Hat Inc.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along
-with this program; if not, write to the Free Software Foundation, Inc.,
-51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
diff --git a/trunk/hivex/tx-pull.sh b/trunk/hivex/tx-pull.sh
deleted file mode 100755
index 0cdd6c0..0000000
--- a/trunk/hivex/tx-pull.sh
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/bash -
-# Pull translations from Transifex.
-# Copyright (C) 2011 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-set -e
-set -v
-
-echo tx pull
-tx pull
-
-# Remove PO files that have no translations in them.
-for f in po/*.po; do
- if ! grep -q '^msgstr "[^"]' $f; then
- echo rm $f
- rm $f
- fi
-done
diff --git a/trunk/hivex/xml/Makefile.am b/trunk/hivex/xml/Makefile.am
deleted file mode 100644
index 67ba248..0000000
--- a/trunk/hivex/xml/Makefile.am
+++ /dev/null
@@ -1,56 +0,0 @@
-# hivex
-# Copyright (C) 2009-2010 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-EXTRA_DIST = \
- hivexml.pod
-
-bin_PROGRAMS = hivexml
-
-hivexml_SOURCES = \
- hivexml.c
-
-hivexml_LDADD = ../lib/libhivex.la ../gnulib/lib/libgnu.la $(LIBXML2_LIBS)
-hivexml_CFLAGS = \
- -DLOCALEBASEDIR=\""$(datadir)/locale"\" \
- -I$(top_srcdir)/gnulib/lib \
- -I$(top_builddir)/gnulib/lib \
- -I$(top_srcdir)/lib \
- $(LIBXML2_CFLAGS) \
- $(WARN_CFLAGS) $(WERROR_CFLAGS)
-
-man_MANS = hivexml.1
-
-hivexml.1: hivexml.pod
- $(POD2MAN) \
- --section 1 \
- -c "Windows Registry" \
- --name "hivexml" \
- --release "$(PACKAGE_NAME)-$(PACKAGE_VERSION)" \
- $< > $@-t; mv $@-t $@
-
-noinst_DATA = \
- $(top_builddir)/html/hivexml.1.html
-
-$(top_builddir)/html/hivexml.1.html: hivexml.pod
- mkdir -p $(top_builddir)/html
- cd $(top_builddir) && pod2html \
- --css 'pod.css' \
- --htmldir html \
- --outfile html/hivexml.1.html \
- xml/hivexml.pod
-
-CLEANFILES = $(man_MANS)
diff --git a/trunk/hivex/xml/hivexml.c b/trunk/hivex/xml/hivexml.c
deleted file mode 100644
index a4bc7eb..0000000
--- a/trunk/hivex/xml/hivexml.c
+++ /dev/null
@@ -1,534 +0,0 @@
-/* hivexml - Convert Windows Registry "hive" to XML file.
- * Copyright (C) 2009 Red Hat Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <config.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdint.h>
-#include <inttypes.h>
-#include <unistd.h>
-#include <errno.h>
-#include <time.h>
-#include <locale.h>
-
-#ifdef HAVE_LIBINTL_H
-#include <libintl.h>
-#endif
-
-#include <getopt.h>
-
-#include <libxml/xmlwriter.h>
-
-#include "hivex.h"
-
-#ifdef HAVE_GETTEXT
-#include "gettext.h"
-#define _(str) dgettext(PACKAGE, (str))
-//#define N_(str) dgettext(PACKAGE, (str))
-#else
-#define _(str) str
-//#define N_(str) str
-#endif
-
-static char *filetime_to_8601 (int64_t windows_ticks);
-
-/* Callback functions. */
-static int node_start (hive_h *, void *, hive_node_h, const char *name);
-static int node_end (hive_h *, void *, hive_node_h, const char *name);
-static int value_string (hive_h *, void *, hive_node_h, hive_value_h, hive_type t, size_t len, const char *key, const char *str);
-static int value_multiple_strings (hive_h *, void *, hive_node_h, hive_value_h, hive_type t, size_t len, const char *key, char **argv);
-static int value_string_invalid_utf16 (hive_h *, void *, hive_node_h, hive_value_h, hive_type t, size_t len, const char *key, const char *str);
-static int value_dword (hive_h *, void *, hive_node_h, hive_value_h, hive_type t, size_t len, const char *key, int32_t);
-static int value_qword (hive_h *, void *, hive_node_h, hive_value_h, hive_type t, size_t len, const char *key, int64_t);
-static int value_binary (hive_h *, void *, hive_node_h, hive_value_h, hive_type t, size_t len, const char *key, const char *value);
-static int value_none (hive_h *, void *, hive_node_h, hive_value_h, hive_type t, size_t len, const char *key, const char *value);
-static int value_other (hive_h *, void *, hive_node_h, hive_value_h, hive_type t, size_t len, const char *key, const char *value);
-
-static struct hivex_visitor visitor = {
- .node_start = node_start,
- .node_end = node_end,
- .value_string = value_string,
- .value_multiple_strings = value_multiple_strings,
- .value_string_invalid_utf16 = value_string_invalid_utf16,
- .value_dword = value_dword,
- .value_qword = value_qword,
- .value_binary = value_binary,
- .value_none = value_none,
- .value_other = value_other
-};
-
-#define XML_CHECK(proc, args) \
- do { \
- if ((proc args) == -1) { \
- fprintf (stderr, _("%s: failed to write XML document\n"), #proc); \
- exit (EXIT_FAILURE); \
- } \
- } while (0)
-
-int
-main (int argc, char *argv[])
-{
- setlocale (LC_ALL, "");
-#ifdef HAVE_BINDTEXTDOMAIN
- bindtextdomain (PACKAGE, LOCALEBASEDIR);
- textdomain (PACKAGE);
-#endif
-
- int c;
- int open_flags = 0;
- int visit_flags = 0;
-
- while ((c = getopt (argc, argv, "dk")) != EOF) {
- switch (c) {
- case 'd':
- open_flags |= HIVEX_OPEN_DEBUG;
- break;
- case 'k':
- visit_flags |= HIVEX_VISIT_SKIP_BAD;
- break;
- default:
- fprintf (stderr, "hivexml [-dk] regfile > output.xml\n");
- exit (EXIT_FAILURE);
- }
- }
-
- if (optind + 1 != argc) {
- fprintf (stderr, _("hivexml: missing name of input file\n"));
- exit (EXIT_FAILURE);
- }
-
- hive_h *h = hivex_open (argv[optind], open_flags);
- if (h == NULL) {
- perror (argv[optind]);
- exit (EXIT_FAILURE);
- }
-
- /* Note both this macro, and xmlTextWriterStartDocument leak memory. There
- * doesn't seem to be any way to recover that memory, but it's not a
- * large amount.
- */
- LIBXML_TEST_VERSION;
-
- xmlTextWriterPtr writer;
- writer = xmlNewTextWriterFilename ("/dev/stdout", 0);
- if (writer == NULL) {
- fprintf (stderr, _("xmlNewTextWriterFilename: failed to create XML writer\n"));
- exit (EXIT_FAILURE);
- }
-
- XML_CHECK (xmlTextWriterStartDocument, (writer, NULL, "utf-8", NULL));
- XML_CHECK (xmlTextWriterStartElement, (writer, BAD_CAST "hive"));
-
- int64_t hive_mtime = hivex_last_modified (h);
- if (hive_mtime >= 0) {
- char *timebuf = filetime_to_8601 (hive_mtime);
- if (timebuf) {
- XML_CHECK (xmlTextWriterStartElement, (writer, BAD_CAST "mtime"));
- XML_CHECK (xmlTextWriterWriteString, (writer, BAD_CAST timebuf));
- XML_CHECK (xmlTextWriterEndElement, (writer));
- free (timebuf);
- }
- }
-
- if (hivex_visit (h, &visitor, sizeof visitor, writer, visit_flags) == -1) {
- perror (argv[optind]);
- exit (EXIT_FAILURE);
- }
-
- if (hivex_close (h) == -1) {
- perror (argv[optind]);
- exit (EXIT_FAILURE);
- }
-
- XML_CHECK (xmlTextWriterEndElement, (writer));
- XML_CHECK (xmlTextWriterEndDocument, (writer));
- xmlFreeTextWriter (writer);
-
- exit (EXIT_SUCCESS);
-}
-
-/* Convert Windows filetime to ISO 8601 format.
- * http://stackoverflow.com/questions/6161776/convert-windows-filetime-to-second-in-unix-linux/6161842#6161842
- *
- * Source for time_t->char* conversion: Fiwalk version 0.6.14's
- * fiwalk.cpp.
- *
- * The caller should free the returned buffer.
- *
- * This function returns NULL on a 0 input. In the context of
- * hives, which only have mtimes, 0 will always be a complete
- * absence of data.
- */
-
-#define WINDOWS_TICK 10000000LL
-#define SEC_TO_UNIX_EPOCH 11644473600LL
-#define TIMESTAMP_BUF_LEN 32
-
-static char *
-filetime_to_8601 (int64_t windows_ticks)
-{
- char *ret;
- time_t t;
- struct tm *tm;
-
- if (windows_ticks == 0LL)
- return NULL;
-
- t = windows_ticks / WINDOWS_TICK - SEC_TO_UNIX_EPOCH;
- tm = gmtime (&t);
- if (tm == NULL)
- return NULL;
-
- ret = malloc (TIMESTAMP_BUF_LEN);
- if (ret == NULL) {
- perror ("malloc");
- exit (EXIT_FAILURE);
- }
-
- if (strftime (ret, TIMESTAMP_BUF_LEN, "%FT%TZ", tm) == 0) {
- perror ("strftime");
- exit (EXIT_FAILURE);
- }
-
- return ret;
-}
-
-#define BYTE_RUN_BUF_LEN 32
-
-static int
-node_byte_runs (hive_h *h, void *writer_v, hive_node_h node)
-{
- xmlTextWriterPtr writer = (xmlTextWriterPtr) writer_v;
- char buf[1+BYTE_RUN_BUF_LEN];
- errno = 0;
- size_t node_struct_length = hivex_node_struct_length (h, node);
- if (errno) {
- if (errno == EINVAL) {
- fprintf (stderr, "node_byte_runs: Invoked on what does not seem to be a node (%zu).\n", node);
- }
- return -1;
- }
- /* A node has one byte run. */
- XML_CHECK (xmlTextWriterStartElement, (writer, BAD_CAST "byte_runs"));
- XML_CHECK (xmlTextWriterStartElement, (writer, BAD_CAST "byte_run"));
- memset (buf, 0, 1+BYTE_RUN_BUF_LEN);
- snprintf (buf, 1+BYTE_RUN_BUF_LEN, "%zu", node);
- XML_CHECK (xmlTextWriterWriteAttribute, (writer, BAD_CAST "file_offset", BAD_CAST buf));
- snprintf (buf, 1+BYTE_RUN_BUF_LEN, "%zu", node_struct_length);
- XML_CHECK (xmlTextWriterWriteAttribute, (writer, BAD_CAST "len", BAD_CAST buf));
- XML_CHECK (xmlTextWriterEndElement, (writer));
- XML_CHECK (xmlTextWriterEndElement, (writer));
- return 0;
-}
-
-static int
-node_start (hive_h *h, void *writer_v, hive_node_h node, const char *name)
-{
- int64_t last_modified;
- char *timebuf;
- int ret = 0;
-
- xmlTextWriterPtr writer = (xmlTextWriterPtr) writer_v;
- XML_CHECK (xmlTextWriterStartElement, (writer, BAD_CAST "node"));
- XML_CHECK (xmlTextWriterWriteAttribute, (writer, BAD_CAST "name", BAD_CAST name));
-
- if (node == hivex_root (h)) {
- XML_CHECK (xmlTextWriterWriteAttribute, (writer, BAD_CAST "root", BAD_CAST "1"));
- }
-
- last_modified = hivex_node_timestamp (h, node);
- if (last_modified >= 0) {
- timebuf = filetime_to_8601 (last_modified);
- if (timebuf) {
- XML_CHECK (xmlTextWriterStartElement, (writer, BAD_CAST "mtime"));
- XML_CHECK (xmlTextWriterWriteString, (writer, BAD_CAST timebuf));
- XML_CHECK (xmlTextWriterEndElement, (writer));
- free (timebuf);
- }
- }
-
- ret = node_byte_runs (h, writer_v, node);
- return ret;
-}
-
-static int
-node_end (hive_h *h, void *writer_v, hive_node_h node, const char *name)
-{
- xmlTextWriterPtr writer = (xmlTextWriterPtr) writer_v;
- XML_CHECK (xmlTextWriterEndElement, (writer));
- return 0;
-}
-
-static void
-start_value (xmlTextWriterPtr writer,
- const char *key, const char *type, const char *encoding)
-{
- XML_CHECK (xmlTextWriterStartElement, (writer, BAD_CAST "value"));
- XML_CHECK (xmlTextWriterWriteAttribute, (writer, BAD_CAST "type", BAD_CAST type));
- if (encoding)
- XML_CHECK (xmlTextWriterWriteAttribute, (writer, BAD_CAST "encoding", BAD_CAST encoding));
- if (*key)
- XML_CHECK (xmlTextWriterWriteAttribute, (writer, BAD_CAST "key", BAD_CAST key));
- else /* default key */
- XML_CHECK (xmlTextWriterWriteAttribute, (writer, BAD_CAST "default", BAD_CAST "1"));
-}
-
-static void
-end_value (xmlTextWriterPtr writer)
-{
- XML_CHECK (xmlTextWriterEndElement, (writer));
-}
-
-static int
-value_byte_runs (hive_h *h, void *writer_v, hive_value_h value) {
- xmlTextWriterPtr writer = (xmlTextWriterPtr) writer_v;
- char buf[1+BYTE_RUN_BUF_LEN];
- size_t value_data_cell_length;
- errno = 0;
- size_t value_data_structure_length = hivex_value_struct_length (h, value);
- if (errno != 0) {
- if (errno == EINVAL) {
- fprintf (stderr, "value_byte_runs: Invoked on what does not seem to be a value (%zu).\n", value);
- }
- return -1;
- }
- hive_value_h value_data_cell_offset = hivex_value_data_cell_offset (h, value, &value_data_cell_length);
- if (errno != 0)
- return -1;
-
- XML_CHECK (xmlTextWriterStartElement, (writer, BAD_CAST "byte_runs"));
- memset (buf, 0, 1+BYTE_RUN_BUF_LEN);
-
- /* Write first byte run for data structure */
- XML_CHECK (xmlTextWriterStartElement, (writer, BAD_CAST "byte_run"));
- snprintf (buf, 1+BYTE_RUN_BUF_LEN, "%zu", value);
- XML_CHECK (xmlTextWriterWriteAttribute, (writer, BAD_CAST "file_offset", BAD_CAST buf));
- snprintf (buf, 1+BYTE_RUN_BUF_LEN, "%zu", value_data_structure_length);
- XML_CHECK (xmlTextWriterWriteAttribute, (writer, BAD_CAST "len", BAD_CAST buf));
- XML_CHECK (xmlTextWriterEndElement, (writer));
-
- /* Write second byte run for longer values */
- if (value_data_cell_length > 4) {
- XML_CHECK (xmlTextWriterStartElement, (writer, BAD_CAST "byte_run"));
- snprintf (buf, 1+BYTE_RUN_BUF_LEN, "%zu", value_data_cell_offset);
- XML_CHECK (xmlTextWriterWriteAttribute, (writer, BAD_CAST "file_offset", BAD_CAST buf));
- snprintf (buf, 1+BYTE_RUN_BUF_LEN, "%zu", value_data_cell_length);
- XML_CHECK (xmlTextWriterWriteAttribute, (writer, BAD_CAST "len", BAD_CAST buf));
- XML_CHECK (xmlTextWriterEndElement, (writer));
- }
- XML_CHECK (xmlTextWriterEndElement, (writer));
- return 0;
-}
-
-static int
-value_string (hive_h *h, void *writer_v, hive_node_h node, hive_value_h value,
- hive_type t, size_t len, const char *key, const char *str)
-{
- xmlTextWriterPtr writer = (xmlTextWriterPtr) writer_v;
- const char *type;
- int ret = 0;
-
- switch (t) {
- case hive_t_string: type = "string"; break;
- case hive_t_expand_string: type = "expand"; break;
- case hive_t_link: type = "link"; break;
-
- case hive_t_none:
- case hive_t_binary:
- case hive_t_dword:
- case hive_t_dword_be:
- case hive_t_multiple_strings:
- case hive_t_resource_list:
- case hive_t_full_resource_description:
- case hive_t_resource_requirements_list:
- case hive_t_qword:
- abort (); /* internal error - should not happen */
-
- default:
- type = "unknown";
- }
-
- start_value (writer, key, type, NULL);
- XML_CHECK (xmlTextWriterStartAttribute, (writer, BAD_CAST "value"));
- XML_CHECK (xmlTextWriterWriteString, (writer, BAD_CAST str));
- XML_CHECK (xmlTextWriterEndAttribute, (writer));
- ret = value_byte_runs (h, writer_v, value);
- end_value (writer);
- return ret;
-}
-
-static int
-value_multiple_strings (hive_h *h, void *writer_v, hive_node_h node,
- hive_value_h value, hive_type t, size_t len,
- const char *key, char **argv)
-{
- xmlTextWriterPtr writer = (xmlTextWriterPtr) writer_v;
- int ret = 0;
- start_value (writer, key, "string-list", NULL);
-
- size_t i;
- for (i = 0; argv[i] != NULL; ++i) {
- XML_CHECK (xmlTextWriterStartElement, (writer, BAD_CAST "string"));
- XML_CHECK (xmlTextWriterWriteString, (writer, BAD_CAST argv[i]));
- XML_CHECK (xmlTextWriterEndElement, (writer));
- }
-
- ret = value_byte_runs (h, writer_v, value);
- end_value (writer);
- return ret;
-}
-
-static int
-value_string_invalid_utf16 (hive_h *h, void *writer_v, hive_node_h node,
- hive_value_h value, hive_type t, size_t len,
- const char *key,
- const char *str /* original data */)
-{
- xmlTextWriterPtr writer = (xmlTextWriterPtr) writer_v;
- const char *type;
- int ret = 0;
-
- switch (t) {
- case hive_t_string: type = "bad-string"; break;
- case hive_t_expand_string: type = "bad-expand"; break;
- case hive_t_link: type = "bad-link"; break;
- case hive_t_multiple_strings: type = "bad-string-list"; break;
-
- case hive_t_none:
- case hive_t_binary:
- case hive_t_dword:
- case hive_t_dword_be:
- case hive_t_resource_list:
- case hive_t_full_resource_description:
- case hive_t_resource_requirements_list:
- case hive_t_qword:
- abort (); /* internal error - should not happen */
-
- default:
- type = "unknown";
- }
-
- start_value (writer, key, type, "base64");
- XML_CHECK (xmlTextWriterStartAttribute, (writer, BAD_CAST "value"));
- XML_CHECK (xmlTextWriterWriteBase64, (writer, str, 0, len));
- XML_CHECK (xmlTextWriterEndAttribute, (writer));
- ret = value_byte_runs (h, writer_v, value);
- end_value (writer);
-
- return ret;
-}
-
-static int
-value_dword (hive_h *h, void *writer_v, hive_node_h node, hive_value_h value,
- hive_type t, size_t len, const char *key, int32_t v)
-{
- xmlTextWriterPtr writer = (xmlTextWriterPtr) writer_v;
- int ret = 0;
- start_value (writer, key, "int32", NULL);
- XML_CHECK (xmlTextWriterWriteFormatAttribute, (writer, BAD_CAST "value", "%" PRIi32, v));
- ret = value_byte_runs (h, writer_v, value);
- end_value (writer);
- return ret;
-}
-
-static int
-value_qword (hive_h *h, void *writer_v, hive_node_h node, hive_value_h value,
- hive_type t, size_t len, const char *key, int64_t v)
-{
- xmlTextWriterPtr writer = (xmlTextWriterPtr) writer_v;
- int ret = 0;
- start_value (writer, key, "int64", NULL);
- XML_CHECK (xmlTextWriterWriteFormatAttribute, (writer, BAD_CAST "value", "%" PRIi64, v));
- ret = value_byte_runs (h, writer_v, value);
- end_value (writer);
- return ret;
-}
-
-static int
-value_binary (hive_h *h, void *writer_v, hive_node_h node, hive_value_h value,
- hive_type t, size_t len, const char *key, const char *v)
-{
- xmlTextWriterPtr writer = (xmlTextWriterPtr) writer_v;
- int ret = 0;
- start_value (writer, key, "binary", "base64");
- XML_CHECK (xmlTextWriterStartAttribute, (writer, BAD_CAST "value"));
- XML_CHECK (xmlTextWriterWriteBase64, (writer, v, 0, len));
- XML_CHECK (xmlTextWriterEndAttribute, (writer));
- ret = value_byte_runs (h, writer_v, value);
- end_value (writer);
- return ret;
-}
-
-static int
-value_none (hive_h *h, void *writer_v, hive_node_h node, hive_value_h value,
- hive_type t, size_t len, const char *key, const char *v)
-{
- xmlTextWriterPtr writer = (xmlTextWriterPtr) writer_v;
- int ret = 0;
- start_value (writer, key, "none", "base64");
- if (len > 0) {
- XML_CHECK (xmlTextWriterStartAttribute, (writer, BAD_CAST "value"));
- XML_CHECK (xmlTextWriterWriteBase64, (writer, v, 0, len));
- XML_CHECK (xmlTextWriterEndAttribute, (writer));
- ret = value_byte_runs (h, writer_v, value);
- }
- end_value (writer);
- return ret;
-}
-
-static int
-value_other (hive_h *h, void *writer_v, hive_node_h node, hive_value_h value,
- hive_type t, size_t len, const char *key, const char *v)
-{
- xmlTextWriterPtr writer = (xmlTextWriterPtr) writer_v;
- const char *type;
- int ret = 0;
-
- switch (t) {
- case hive_t_none:
- case hive_t_binary:
- case hive_t_dword:
- case hive_t_dword_be:
- case hive_t_qword:
- case hive_t_string:
- case hive_t_expand_string:
- case hive_t_link:
- case hive_t_multiple_strings:
- abort (); /* internal error - should not happen */
-
- case hive_t_resource_list: type = "resource-list"; break;
- case hive_t_full_resource_description: type = "resource-description"; break;
- case hive_t_resource_requirements_list: type = "resource-requirements"; break;
-
- default:
- type = "unknown";
- }
-
- start_value (writer, key, type, "base64");
- if (len > 0) {
- XML_CHECK (xmlTextWriterStartAttribute, (writer, BAD_CAST "value"));
- XML_CHECK (xmlTextWriterWriteBase64, (writer, v, 0, len));
- XML_CHECK (xmlTextWriterEndAttribute, (writer));
- ret = value_byte_runs (h, writer_v, value);
- }
- end_value (writer);
-
- return ret;
-}
diff --git a/trunk/hivex/xml/hivexml.pod b/trunk/hivex/xml/hivexml.pod
deleted file mode 100644
index 257257c..0000000
--- a/trunk/hivex/xml/hivexml.pod
+++ /dev/null
@@ -1,66 +0,0 @@
-=encoding utf8
-
-=head1 NAME
-
-hivexml - Convert Windows Registry binary "hive" into XML
-
-=head1 SYNOPSIS
-
- hivexml [-dk] hivefile > output.xml
-
-=head1 DESCRIPTION
-
-This program converts a single Windows Registry binary "hive"
-file into a self-describing XML format.
-
-=head1 OPTIONS
-
-=over 4
-
-=item B<-d>
-
-Enable lots of debug messages. If you find a Registry file
-that this program cannot parse, please enable this option and
-post the complete output I<and> the Registry file in your
-bug report.
-
-=item B<-k>
-
-Keep going even if we find errors in the Registry file. This
-skips over any parts of the Registry that we cannot read.
-
-=back
-
-=head1 SEE ALSO
-
-L<hivex(3)>,
-L<hivexget(1)>,
-L<hivexsh(1)>,
-L<hivexregedit(1)>,
-L<virt-win-reg(1)>,
-L<guestfs(3)>,
-L<http://libguestfs.org/>,
-L<virt-cat(1)>,
-L<virt-edit(1)>.
-
-=head1 AUTHORS
-
-Richard W.M. Jones (C<rjones at redhat dot com>)
-
-=head1 COPYRIGHT
-
-Copyright (C) 2009 Red Hat Inc.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along
-with this program; if not, write to the Free Software Foundation, Inc.,
-51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

File Metadata

Mime Type
text/x-diff
Expires
Thu, Nov 20, 4:47 AM (31 m, 7 s)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
1360497
Default Alt Text
(629 KB)

Event Timeline